Satellite C660 - not able to install the WXP chipset driver
Go !
I installed WIN XP in my Toshiba Satellite C660 laptop, and downloaded the drivers for windows XP,but I am not able to install the chipset and display drivers.
It says 'This computer does not meet the minimum requirment for installing this software.
Setup will exit now' .
Can you help me,please ?
Hi
Notebook supports the Mobile Intel(R) GM45 Express Chipset
Its Intel chipset so you can find the drivers on Intel page.
Here is an Intel page which allows you to check the system for latest updates:
http://www.intel.com/p/en_US/support/detect/graphics
Similar Messages
-
Garageband was not able to install the new sounds
I'm on an iMac 21.5-inch (mid 2011) running Yosemite; 2.5 GHz Intel Core i5; 4GB memory.
A few months ago, I uninstalled GarageBand. Now I'm trying to reinstall it. I can get GarageBand 6 reinstalled, but I would like to get working with the latest version. I'm able to download the latest version from the App Store with no issue. It installs with no issue.
When I open it, it thanks for me downloading it, and then begins to download "an essential collection of sounds and loops." After a bit of downloading, it asks for my admin password; I enter it, and a few seconds later, it gives the error: "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again." Closing and reopening GarageBand just takes me through the same loop (no pun intended). When the window is open, if I click on the GarageBand menu in the Apple bar, nothing happens.
It does not ask me to accept anything; I am signed into the App Store with the same Apple ID I have always used (it is the only one I have ever had, so that's not the issue). I am an admin on my Mac, so it's not a permissions issue. It's not a password issue either.
Things I have tried:
Rebooting into Safe Boot and opening from there; same issue.
Repaired permissions (it fixed oodles of things completely unrelated to GarageBand); same issue.
Creating a new admin profile and opening from there; it gives a different error, but the effect is the same.
Removed the program, trashed anything remotely related to GarageBand (preferences, folders, etc), emptied the trash, restarted the computer, reinstalled; same issue.
Installed GarageBand on top of itself, just in case; same issue.
I can't think of what else to try. Help!
For reference, here is a screenshot of what I'm getting stuck on:The solution Lijoesat posted above worked for me!
First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
I tried to empty the trash bin after but many files was locked and Garageband would still not install.
I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
The inserted picture show some of the folder structure, I deleted everything after private/var/folders/ -
When I attempt to download all the sounds in my Garage Band library, I get this message.
"GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again". When I do this, I get the same message again.
CAn anyone advise how to get all the sounds in my Garageband library?the same here for the drummers sounds in garageband 10xxx
-
I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
Installation was rejected because I need the iOS.4.3
Thanks for your help
MichaelThat situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.
-
I am not able to install the toad version for Oracle 11g
Hi,
1] I am not able to install the "Toad for Oracle 11.5 Freeware" it's expire in Oct-2013.Now i am trying to download the new version but the same s/w downloaded and at the time installation it's shown me that this s/w is expire and install new version
2] Also installed "Toad for Oracle Version 9.0" vesrion it's installed Successfully but when i am trying to start the toad it's shown msg as "Oracle Instant client is not installed.
3] In "Toad for Oracle Version 9.0" can i exceute the queryies from Oracle 11g database.
Kindly suggest to way out,
Regards,
Sachinuser7197586 wrote:
Hi
Thanks for update.
If i want to use the Toad,can you please suggest
Regards,
Sachin
Re-asking won't help you to get help, especially when it's for non-Oracle product.
You've been advised to look at Toad side. Please go ahead.
-- locking thread --
Nicolas (moderator). -
I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad using Apple Configurator. One code in the spreadsheet says it's already been used but shows no serial number or device name.
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy -
Model Name: MacBook Pro
OS X Yosemite: 10.10.2
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 4 GB
I just purchased GarageBand 10.0.3 last week and I repeatedly keep getting the following message when I try to download ANY of the FREE Piano lessons in the "Lesson Store", "Garageband was not able to install the new sounds. Close and re-open Garageband to download and install them again." I have tried EVERY suggestion that I have come across on the internet and nothing is working! If I'd known I would encounter this issue, I would not have paid for this. Tried restarting, rebooting, reinstalling, deleting the cache, and on the verge of just reinstalling the OS. I have come across people have the same issue for months and I can't believe Apple has not offered a fix or update or anything.Immargarita, Since you just purchased the software you qualify for a no charge one on one at an Apple store. They never could tell me what was wrong, but after three visits and not one dime, all lessons downloaded at the store. I was not going home until it worked.
Hint, hint, I had just upgraded OX when the problem started. So... I qualified for tech support. I forgot to get my none working since the up grade Photoshop fixed. Some Java component can't be found and just like GB, the link to Apple for support does not work. I have the good old PS disc. I'm not happy with this cloud stuff.
When you call and give the SN for your computer, they may say it will cost $29.00 dollars for one time support. Instead choose a different prompt, tell the human being what your problem is and set up a visit to the Apple store. BTW, no one at the store seemed to have heard of this issue.
The techie just started the download and ran the activity monitor. The download stopped once. Then he continued it and everything is there now.
Shame on you Apple.
Hope this helps. -
I'm not able to install the new Java update
I have a MacPro 2.8 Intel Core Duo 8GB 500GB HD with Mac OS 10.6.8 installed and every time that I try to install the sugested update from my mchine I receive an error message as: " The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time the Software Update runs"
I already restarted more than three times and cleaned all system with Onyx but continue to receive the same message.
Is there anybody there with the same issue that I'm having? Any help?
Thank you in advance for any light on this issue!Check out all software you have that uses Java, like software that that uses database connections (using JDBC).
Several people are reporting that the latest Java update (_29) breaks their critical software.
The solution for at least one was to re-install a "combo updater" from and earlier age (earlier than the _29 update) to re-instate the previous Java. -
Satellite A30 - Not able to install Power Saver on Windows XP Professional
Hello, i need help, i had to install win xp prof on my a30 but i cant install the power saver tool which i downloaded from this page. the tool is telling me "You can not install this version of Power Saver on your System", but its the lastest version for windows xp regarding this toshiba page. is the power saver tool only for windows xp home ?
Hi
No, the Powers saver should also works and run with Win XP Pro.
There is no difference. Every tool which works on XP Home is compatible with Win XP Pro too.
Did you receive the Tools and Utility CD? You could try to use this version -
Satellite L300-1AM PSLBGE - Cannot install the graphic card driver
Hello everyone.
I have a big problem with my notebook concerning the video driver.
Yesterday i've booted my windows and put Windows Vista on it.
I've taken all the drivers from toshiba site but i've encountered a problem regarding the graphic driver.
When enter setup it starts and them it gives me an error "This computer does not meet the minimum requirements for installing the software. Setup will exit". Need to say that before the boot i had Vista also and it worked.
So can you please help me because i don`t know what do to..
i`ve tried all possibilities
Thank you very much
TeodoraHi
I can not understand this.
The unit supports the Intel GL40 graphic chipset.
The Intel driver from the Toshiba page should be ok
In readme.txt file you can find exact the same info which has been posted by Paolo30.
1. Click "Start" then right click on "Computer" button and then choose Manage.
2. Permit the User Account Control to run by selecting the "continue" button. When the Computer Management window opens select the "device manager" icon. (NOTE: IF UPDATING DRIVER GO TO STEP 3B)
3a. Double click "Video Controller (VGA Compatible)". (Go To STEP 4)
3b. Select "Display adapters" then Double click on the graphics controller
shown.
4. Click on "driver" tab and select "Update Driver".
5. Select the following option: "Browse my computer for driver software".
6. Select the following option: "Let me pick from a list of device drivers on my computer".
7. Click on the "Have Disk..." button and then the "Browse" button.
8. Enter the directory where you unzipped the file you downloaded, and then enter the "Graphics" subdirectory. Locate and highlight the "igdlh.INF" (if 32-bit) or "igdlh64.INF" (if 64-bit). Click on the "Open" button.
9. Click on the "OK" button. A window listing all of the available display types should open. Select the display adapter that your system contains and then click on the "Next" button.
10. Click on the "Next" button. The operating system will install the driver. Click on the "Finish" button when done.
11. Click on the "Close" button and then click on the "Yes" button to reboot. The driver should now be loaded. -
Not able to install the email setting in used Blackberry bold
hello,
i need your help to install email settings and balckberry id in BOLD 9700,
As this is my company phone and it was used by other colleuge and the network was VODAFONE, VODAFONE network is not active now.
my model is BLACKBERRY CURVE 8520 and i am using AIRTEL service.if i tries to use the airtel sim in BOLD 9700, its not working.
Can any one support me to solve this problem
Rgds
Lobosurojen wrote:
yes, but vodafone network was used in this phone,so is there any problem in chnaging netwrok.
No, if the device is unlocked to work on any carrier, you will be fine with another network SIM card in the device.
See this link to determine if your Bold is unlocked: Guide to Unlocking your BlackBerry & Unlock Codes
surojen wrote:
Vodafone network user id there in blackberry id,
Do you mean the old user's BlackBerryID is still in the device?
You must perform a security wipe on the device before using the device, to remove the old BlackBerryID.
Then you can setup the device as yours with your own BlackBerryID.
BlackBerry smartphone must be security wiped before transferring ownership
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Not able to install the windows backup utility or any windows features
Hi Guys,
Good Day.
while i'm trying to install any windows features in server (Windows 2008 Enterprise + service pack 2) I'm getting below error always. Thanks for the advanced help.
Windows PowerShell
Windows Server Backup Features
Windows Server Backup
Command-line Tools
Windows PowerShell: Installation failed
<Error>: Attempt to install Windows PowerShell failed with error code 0x8007045D. The request could not be performed because of an I/O device error
Windows Server Backup Features: Installation failed
<Error>: Attempt to install Windows Server Backup failed with error code 0x8007045D. The request could not be performed because of an I/O device error
<Error>: Attempt to install Command-line Tools failed with error code 0x8007045D. The request could not be performed because of an I/O device error
The following features were not installed:
Windows Server Backup
Command-line ToolsHello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
I also heard it may have to do with my ios version being newer than itunes? I don't know how to find what version I am using either? Thanks for any help!!!
In case this helps, the error message I get when trying to uninstall itunes says " the feature you are trying to use is on a network that is unavailable" then is tells me to click ok to try again or enter an alternate path to a folder containing install package 'itunes.msi', then there is a drop down box and it gives me to places to search beginning with C:....and neither of them work.
-
I am not able to install apps from the app store
i am not able to install the appa from the app store... can sumone pls help
Hi...
If you have security software (anti virus) installed, disable that then try downloading and installing apps.
If you do not have a/v software installed, installing the Mac OS X 10.6.8 Update Combo reinstalls the App Store for you which may help. It's ok to do this even though you are already running v10.6.8.
Restart your Mac after the combo is installed, then try the App Store. -
Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED]
Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'. The command 'sane-find-scanner' finds it but 'scanimage -L' does not. Also xsane and simple-scan program do not find it. Any help will be appreciated.
(I also tried these entries in the udev sane rules:
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
"SUBSYSTEM=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
but they do not work).
Some previous threads:
https://bbs.archlinux.org/viewtopic.php?id=107474
https://bbs.archlinux.org/viewtopic.php?id=65431
Not able to install sane-dev from AUR; 'makepkg -s' gives error:
==> WARNING: Cannot find the git binary required to determine latest git revision.
Last edited by rnarch (2012-03-28 05:05:09)Git was not installed. So I installed it and ran 'makepkg -s' again. It ended with following error:
installing saned.conf in /etc/sane.d/saned.conf...
installing dll.conf in /etc/sane.d/dll.conf...
for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \
/bin/sh ../mkinstalldirs /home/sane-dev/pkg/usr/share/sane/${dir} ; \
done
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/artec_eplus48u
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/gt68xx
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/snapscan
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/epjitsu
/bin/sh ../mkinstalldirs -m 775 -g uucp /home/sane-dev/pkg/var/lock/sane
Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
Create each directory DIR (with mode MODE, if specified), including all
leading file name components.
Report bugs to <[email protected]>.
make[4]: *** [install-lockpath] Error 1
make[4]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[3]: *** [install-data-am] Error 2
make[3]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
Please note the line: Report bugs to <[email protected]>. Is it a bug? Sane-dev was successfully installed by others, eg: https://bbs.archlinux.org/viewtopic.php?id=65431
Last edited by rnarch (2012-03-26 01:11:57)
Maybe you are looking for
-
Convert OTF to PDF and print PDF from Spool
Hi, I have searched all the forums and service market place but could not find solution to my problem. I am using Function module CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF' EXPORTING src_spoolid = p_spool no_dialog
-
Can't able to open CP (ver 5) file in Captivate 7(trial version)
Hi, I have .cp files, I think those files are from Adobe Captivate 5.0 or 5.5 version. I downloaded trial version of Adobe Captivate but those files are not opening in 7. Is there any way I can able to open. While opening .cp file, its giving error
-
I was happily doing stuff on my Arch Linux machine last night, and suddenly it crashed! What I did right before was type 'sync' in a command line, something usually do a few times a day always without any surprises. This time, it crashed hard and
-
Child Window Communicate with Parent Window Question
I am new to the ADF. If I want to create a page which has a button that open a new window. On the new window, user can update something and close the window. After the close of the new window, the parent window should be notified and do some action.
-
i have an older model macbook pro late 2006, the track pad works ,the cursor works but i cannot click to any website?