Satellite C660 - USB sticks are not mounted

I have a *Satellite C660 with Windows 7 64 bit*. When I conect a USB stick (2GB LG or another), Windows mount the USB new drive, but after some seconds, the USB stick is unmount and mount and unmount indefinitely.
With my old *Toshiba Sattelite M50, Windows XP* both sticks work fine.

Hi mkobets,
Probably something is wrong with USB ports or chipset driver if the USB sticks work with your old Toshiba notebook
Easiest way would be updating the chipset driver in my opinion that you can download here:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Similar Messages

[solved] usb-storage-devices (sticks) are not longer mapped via citrix

Hello,
at work we have linux-clients (Arch, Plasma5, updated weekly) connected to a computing center (Win 2008 Servers) via citrix-receiver. In the past, usb-storage-devices were mapped, so we could acces them in Win. Now, they are not longer mapped. I can't say, since when. USB-Sticks are not in daily use. The computing center says, nothing has been changed there. So can someone help me to fix this issue?
Found solution myself: https://wiki.archlinux.org/index.php/Ud … udisks2.29
Last edited by uhoso (2015-04-23 08:57:49)

Hello,
at work we have linux-clients (Arch, Plasma5, updated weekly) connected to a computing center (Win 2008 Servers) via citrix-receiver. In the past, usb-storage-devices were mapped, so we could acces them in Win. Now, they are not longer mapped. I can't say, since when. USB-Sticks are not in daily use. The computing center says, nothing has been changed there. So can someone help me to fix this issue?
Found solution myself: https://wiki.archlinux.org/index.php/Ud … udisks2.29
Last edited by uhoso (2015-04-23 08:57:49)

HP Pavilion dv6-6b10tx two of the usb ports are not working

I have recently bought a HP Pavilion dv6-6b10tx....and had it fixed by hp for a problem with the beeping noise.
After sending my laptop for repairs( replacing the system board), I received my laptop but two of my usb ports are not functioning...
I did a bios update and did the hp update to see if it actually fix anything but not luck. So I went device manager and found a exclamation mark on the renesas electronics usb 3.0 host controller with a device status 'This device cannot start. (Code 10)'. What do i do??

The question is why is the port not working? Is something in the port that you can see? If not, then there isn't much you can do but take the computer in to the genius bar and have the techs see if it is a circuit problem that can be fixed.

PavillionG7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
Shawe

Hi:
Download and instal both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...

Usb drives are not working, usb drives are not working

USB drives are not working. Please help

Non of my Western Digital drives are working anymore on several different Mac computers, one Mac can still work with the drive so I am not getting it up dated to the new OS.
If they told me that all my 2 TB drives would no longer work if I got the new OS I would not have updated.
There needs to be a fix, I can't afford all new drives plus they have video on them that I need to use.
Also iPhoto and Garage Band have disapeared I can't find any trace of them???

USB Ports are not working in Windows 7

I am on a MacBook and I installed Windows 7 via Bootcamp. It is working amazingly. I love all the new features and the look.
But all my usb devices are not working. I have a external HD and a Zune and a printer plugged in and nothing shows up.
I have tried with my usb hub and without. Doesn't make a difference.
BUT, they do show up in the Hardware and Devices place. Like I can remove them but not explore them.
I have installed all the drivers for bootcamp and everything.
Please help.
Thanks in Advance.
Best Regards,
Luc

"I'm a new mac user and I've just purchased a Late 2009 Macbook White. I updated bootcamp and installed windows 7 on it, and upgraded the boot camp assistant on the Windows 7 to 3.1. but when ever i plug in a Flash drive into the upper slot it does not seems to recognize it and there is no safely remove icon on the task bar, but i am able to see it in my computer. but when i plug the same flash drive to the lower usb slot everything works fine, autorun, safely remove. can any one help me with this problem, is it a Hardware problem or Software problem."
do you have the same problem as me?

Usb optical drive not mounting

Usb Optical Drive not mounting via MacBook Pro (13inch 2013) since update to 10.10.1. Any positive solutions?

Hello MicroTuFF,
If you cannot get your USB SuperDrive to not mount disks, then take a look at the troubleshooting in the articles below. Start at the Doesn't accept discs section for your specific issue.
Get help with the slot-loading SuperDrive on your Mac computer
http://support.apple.com/en-us/HT201788
Regards,
-Norm G.

USB DRIVERS ARE NOT WORKING

HELLO SIR,
I HAVE A PROBLEM WITH MY USB DRIVERS. MY USB DRIVERS ARE NOT SUPPORING FOR MASS STORAGE DEVICES ONLY.
I HAVE OPENED THE CONTROL PANEL FOR USB DEVICES. IT GIVES ERROR MESSAGE THAT, "
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)
The driver could not be loaded because a previous version of the driver is still in memory."
SO WHAT CAN I DO FOR THIS? PLEASE HELP ME.

Can you check the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}
At that registry key, in the right window, is there a "Name" UpperFilters and/or
LowerFilters?
If so, what is "Data" for those Names?

Does anyone know why some partitions are not mounted at at boot up?

We have many new intel based IMacs with 1Tb internal drives. Each drive is partitioned into 6 and are in a university mac lab.
Occasionally some of the partitions are not mounted when the mac first boots up, so we have to go into disk utility and mount them manually. This happens on various machines at different times. We have NTFS-3G installed so I'm wondering if it's something to do with that.
Any ideas much appreciated!

These are user-to-user forums, you are not talking to Apple here.
Audiobooks (and ringtones) are currently a one-time only download. I believe that they are all supplied to Apple by audible.com, so I assume that it's them who are requiring the one-time only download restriction. To get it onto your other devices you will need to sync it via a computer. Depending upon what country that you are in, Audible.com have their own app (Audiobooks from Audible) so you might be able to buy direct from them, though I don't know whether you can buy within their app or download audiobooks directly from them within the app e.g. whether they need to be copied via a computer.

After Recovery with CD Satellite C660-1FE keyboard does NOT work

Hello,
A month ago I purchased a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and replaced the broken HD. As I did not make an recovery image of my HD, I had to order the Product recovery discs off the Toshiba website (3 discs, of which disc 1 and 3 were the only one's required for installation).
Now, I have the problem that my laptop keyboard does not work. I am currently using a USB keyboard and mouse to replace my keyboard and touchpad of the laptop.
The laptop keyboard works fine in BIOS. Therefore, I hope it's just a driver problem.
I have:
tried finding and installing lots of drivers on from the toshiba website, no result.
tried changing settings in the bios (usb enable/disable).
tried to fix the problem by re-installing the entire computer again several times.
The keyboard seems to work until windows loads. When the system is starting up I can press caps lock and num lock and the green lights come on. This all stops working once the windows startup symbol appears.
Perhaps a second problem in the device manager: under the display-adapter, 2 subcategories have exclamation marks: it says Mobile Intel(R) 4 series express chipset family twice! I can't seems to fix these with any drivers I can find either. When I check the settings I have this message (google translate since it was in dutch):
+The digital signature for the drivers for this device is required, can not be verified. Possible after a recent hardware or software change a file that is installed incorrectly signed or damaged, or is malicious software installed from an unknown source. (Code 52)+
+You need to restart the computer to this device changes to take effect.+ (obviously I tried that too)
Can someone please give me some help? I am at the end of my wits.
Sincerely,
Daniel

Hi MisterX,
thank you for your response. I have tried these things and there is no such thing as PS2/keyboard in device manager. It's as if the Hardware is not even recognizable in windows. I am starting to doubt whether I got the right Backup CD.
I wrote the following e-mail to [email protected]:
+Dear Toshiba,+
+after receiving the recovery CD's for my toshiba c660-1FE, it turns out that the drivers for the keyboard and touchpad are not installed. I have tried many things to get around this but it seems to me that I have received the wrong product recovery CD's. The chipset drivers are not the right ones, the overall layout of this version of windows 7 is different from before and when looking for answers in the toshiba forum I have concluded that the recovery CD's could be the wrong ones.+
+My laptop: Satellite C660-1FE+
+serial: 5B378048K+
+Part-nr: PSC0LE 02M0TU26DU+
+Recovery CD's I received are CD's 1-3 with serial R14254DU+
+Would you be so kind to check whether these CD's should be 100% compatible with my laptop?+
+This would be greatly appreciated,+
+Daniel+
MisterX, do you know any other emails I can forward this too? Or anyone who could perhaps tell me if I got the right CD's? They are taking their time to respong to this...
Kind regards,
Daniel

Usb stick doesn't mount on Mac, but does on Win

Hello all,
I've been looking for a solution for my issue allover, but it seems to be persistently difficult to find.
I got an unbranded 4gb pen drive formated as FAT32. The device works perfectly on Windows, but my Mac OS 10.8.4 doesn't recognize it.
I've tried to:
a) Look at the "Utilities Disk" and "Finder". Doesn't show up.
b) Format at any possible format with Windows (FAT32, exFAT, NTFS, even HFS+ using a software).
c) Use another usb stick in the same port. It works with any other pen drive.
d) Use the usb stick in another computer. Still, work only on Windows, not on Mac.
e) Use it with Windows. Works.
P.S.: I'm attaching a image of the mounted items. The two HFS are partitions of my external hard drive (disk1s2 and disk1s3) and the other is the Bootcamp partition (disk0s4).
Does anyone know what I could do to make the usb stick work on my Mac?
I'd appreciate any help on this matter.
Cheers!

OK, a SD/compact memory card type of thing used with cameras. The same solution/diagnosis still applies. Failing mounting the memory card directly in the MacBook, you could do it indirectly, via a cable that connects the camera or whatever it is used with, with the card in it, and the cable connected to your MacBook's USB port. It's a bit of a pain, but it's usually possible to do it that way.

USB stick won't mount on mac mini, it works perfectly on my macbook

Both of them are osx lion.
On the mini the led of the 256Mb USB stick (and still plenty of space!) gives short flashes every second, and won't mount on my desktop, in finder. It doesn't show up in disk utility.
The mac mini is the most recent server model. I tried USB ports on the back of the mac mini, and also on the connected thunderbolt display. Other memorysticks work well. Only this particular one doesn't work on the mini.
The memorystick works perfectly in my 2008 macbook pro. Plug it in, it mounts as it should do.
What can i do?

In Disk Utility, once you highlight a Drive or Partition, you'll see Verify Disk, (blue arrow), & if a drive you're not booted from then Repair Drive, (red arrow), will be an option also...
I'm thinking you may have to copy everything off it & see if you can Format it FAT32.

USB Thumb Drive Not Mounting With Mavericks

I have several Thumb drives (FAT32) that no longer mount on my iMac running Mavericks.
The thumb drives do not show up in finder nor do they show up in disc utilities.
The USB bus still seems to work since other USB devices seem to connect to it, but none
of the thumb drives do. I have done an SMC and PRAM reset with no luck. I do not have
TUXERA nor NTFS-3G so nothing their to disable.
I do have a Mac Mini running Mountain Lion and all thumb drives do work with that.
Out of ideas here.

But given that other USB devices work here — what sorts of other USB devices?
I have 2 external hard drives that work on the very same USB port and an external blu-ray drive as well.
Are there any add-on anti-virus or anti-malware "tools" installed?
None. Never have.
To check the USB bus, remove all hubs and all other external USB devices from this Mac, reboot, connect one of the thumb drives directly to the Mac, and try again.
Everything re-connected except for the thumb drives. External hard drive and Blu-ray drives popped right up but no USB flash drives.
Try a different and newly-created login, and see if the flash drives work there.
I used the Guest login and the same thing, everything works except the Thumb drives.
To check the local OS X installation, see if booting this Mac from the recovery partition (if one is present)
None is present.
or booted from another (external) OS X disk allows access to the thumb drives.
I have en extern HD that is blank, but I do not know how to install Mavericks on it then run it.
Is there anything in common among these failing USB disks? Same brand and model? Or a mixture of different thumb drives?
They are all FAT32, other than that no I have Cruzer, Kingston and PNY brands. 2GB 4GB and 16GB.
Are the OS X systems involved both similar configurations, or are they very different versions?
Mac Mini is Mountain Lion and has no issues with the thumb drive.
Intel iMac is Mavericks and my Mac Book Pro is Mavericks. Neither one of them can mount my USB sticks.
Thanks for your complete reply, you had some items that I did not try but unfortunately it did not help yet.

Satellite C660 keyboard and mouse not working

I have a Satellite C660 that is about to exit the window.
The list of problems are as follows:
Keyboard doesn't work
Mouse pad and button's don't work
USB mouse and keyboard don't work (but light up with power)
It also likes to turn itself off randomly when the battery in but this is the least of the problems.
any ideas as to why this is doing this and what can be done to fix it will be much appreciated.
thanks.

Hi
Im wondering about your statement about external USB mouse and keyboard.
I thought that your problem was related to faulty touchpad module and internal keyboard but now Im thinking that this cannot be the case since the external USB keyboard does not work as well as the external USB mouse.
Probably its more serious hardware malfunction: maybe something related to the motherboard??? Who knows an hardware diagnostic test needs to be done to confirm this
Just one question: are you able to access the BIOS? I mean does the F2 keyboard button work in order to access the BIOS?

Satellite A660 - USB stick limited to 2MB/s

I have a Satellite A660 PSAW #C-047017. File transfers with several memory sticks seem to be limited to 2MB/s. Theoretically, it is significantly more than an order of magnitude higher. Is anyone else encountering this?

I'm running Windows 7 Professional 64-bit. It's a fairly new machine. I got it last fall. I bought it with the OS pre-installed. The sticks are relatively new too, purchased within a year. I just drag a file folder to the stick and the fluctuating transfer speed rarely tops 2Mbps.
I opened the device manager and saw two icons, "USB controllers" and "USB Virtualization". Each of these two icons expands into a series of child icons, but there are no warning symbols beside any of them.
About chipset drivers, I'm currently in Canada. The PSAW number reflects a Canadian variation of the model, not a European variation. I just wanted to check how widespread was the speed limitation -- perhaps it is not just a Canadian problem. For all I know, this might be the standard for USB memory sticks.
I checked Toshiba Canada for USB driver downloads (http://support.toshiba.ca/support/Download/ln_byModel.asp). The only drive was something called "NVIDIA Stereoscopic 3D USB Driver". That sounds specific to NVIDIA, and there isn't much explanation about it. For that reason, I'm reluctant to try it.
I was just wondering if anyone else experienced the same bandwidth limit in transferring files to stick. Perhaps it's not a "problem" so much as a defacto standard.

Satellite C660 - USB sticks are not mounted

Similar Messages

Maybe you are looking for