Satellite C660 will not start - OS not found - where to get install disk?

I replaced the HDD in my Toshiba Laptop C660 - following a support check indicated the old one was dead. The laptop initially comes up with the Toshiba Logo then starts scrolling and ends with "Operating System not found".
I do not have a recovery disk / USB. Any helpful advise would be greatly appreciated.
Thank you.

> unfortunately it is for Europe and so doesn't list Australia in the Country /
The Toshiba Australian FAQ [Ive lost my Recovery Discs or didnt have any in the box when I purchased my computer|http://www.mytoshiba.com.au/support/items/faq/69] provides this information
+Toshiba Recovery Disks can be purchased by calling support on 13 30 70 (Australia) or 0800 445 439 (New Zealand).+
+Please note that replacement discs are chargeable at $66.00 (AUD) / $88.00 (NZD) including GST and shipping. You will need to provide your Toshiba Serial Number and your Windows Product Key for this service. This information can be found on the base of your computer.+
+Toshiba Australia & New Zealand cannot create and/or distribute discs for international machines.+
I hope this information will be helpful for you.

Similar Messages

  • HT1349 iTunes will not start on my PC. I get a runtime error from the Visual C== runtime library when iTunesHelper.exe is started. The message states the application attempted to load the library incorrectly. How is the problem to be resolved?

    iTunes will not start on my PC. I get a runtime error from the Visual C++ runtime library when iTunesHelper.exe is started. The message states the application attempted to load the library incorrectly. How is the problem to be resolved?

    Click here and follow the instructions.
    (99035)

  • The phone suddenly shut down!!! not starting again not reading on compute

    the phone suddenly shut down!!!
    not starting again
    not reading on compute

    Connect your iPhone to a power source (computer, wall charger, etc) and hold down BOTH the power AND home buttons for about 10-15 seconds.  If all goes well you should get an Apple logo.  Try it even if you think it won't work, and patience is key: 10 seconds is alot longer than one might think.

  • My itunes will not start in Win XP. I get an error that says MSVCR80.dll can't be found. I am scared if I just reinstall iTunes that I will lose all my music and apps that are in the old itunes. What can I do.

    My iTunes will not start in Win XP. I am getting an error that says MSVCR80.dll can't be found. I am concerned that if I just do a reinstall
    of  iTunes it will overwrite or delete all the music and apps I have on the current app that won't start. When I boot the PC I get the following:
    APSDaemon.exe - unable to locate. MSVCR80.dll not found. Reinstalling application may fix this problem. How can I get iTunes started without losing
    all my music and apps? Thanks

    It won't unless a problem occurs. Back them up, uninstall iTunes and all related components, and reinstall them.
    (100013)

  • Satellite C660/C660D - Desktop background image not loading

    Satellite C660/C660D: Trying to load any image from whatever source fails, with the error message 'an internal error has occurred'. I have tried all the procedures in control panel; none allow a change of background image, although colours can still be altered, as well as themes.
    Microsoft advises this is a manufacturer issue, as my OS is OEM.
    Can anyone help identify this error and suggest how to fix it?

    >Microsoft advises this is a manufacturer issue, as my OS is OEM.
    This is a typical MS answer if the Windows system has not been purchased separately LOL and this is NOT a notebook problem.
    Would recommend checking this MS knowledge base article:
    +Unable to change background picture in Windows 7+
    http://support.microsoft.com/kb/2504610

  • Satellite C660-11W - Num pad does not work

    Hi!
    I have a Toshiba Satellite C660-11W, who I bought 10 months ago. Since October, the num pad of my laptop does not work, but when I push the button "Num Lock", it makes a sound like I had activated the sticky keys.
    How do I solve this problem?

    Hi
    Sounds a little bit like keyboard malfunction.
    I think the service technician should need to initialize the Numpad function by Test & Diagnostic software and should replace the keyboard if the test would fail.

  • My ipod touch 1st gen 16 gb will not connect to itunes, it keeps sayin the Apple Mobile Device service is not started...how do i get it working?

    my touch 1st gen won't work
    everytime i connect it. it says This ipod cannot be used because the Apple Mobile Device Service is not started.
    what do i do?

    The following document is worth a try with that one, carrie:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Satellite C660 freezes on start-up

    Hey guys can you help with my laptop, Toshiba Satellite C660-17J. On startup it freezes although not all the time. By freezing i mean i can move the mouse but not open anything and nothing on the task bar will highlight. The only thing i can see different is the network(wireless) icon doesn't always show up. The last few times it has though but has only shown the searching for networks symbol.
    If i turn of the laptop using the power button and start in safe mode then restart it works OK. Do you have any suggestions whats causing this?

    We dont know how do you use your notebook and how have you configured preinstalled OS so it is not easy to say what is wrong there.
    To be honest I agree with Francesco. Best thing you can do is to back-up all your important data and install recovery image again.
    After doing this you will have clean preinstalled OS and everything will be OK again, I hope.
    If you have more questions about all this you are welcome.

  • Weblogic Server not starting and not logging to logfile?

    Hi all,
    We had a problem on our production systems a few weeks ago whereby weblogic shut itself down overnight (normal operation) but then did not start up again in the early hours as it should.
    Basically as the Weblogic was started we found that the weblogic log gave us the following output.
    ======================================
    Debug is not enabled for this domain. This can be enabled by setting the DEBUG_PORT variable in startWebLogic.sh
    Logging is enabled for this domain. This can be disabled by un-setting the LOGGING variable in startWebLogic.sh
    Logging all system output to /apps/bea81/weblogic81/../user_projects/hdw_live/logs/all.log
    ==========================================
    And the file /apps/bea81/weblogic81/../user_projects/hdw_live/logs/all.log was created but was in fact 0 bytes long.
    Looking at another system where weblogic had come up correctly we noted that the next line in the weblogic log should have been :-
    ===========================================
    <Nov 21, 2006 10:46:01 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.4.2
    _04-b05 from Sun Microsystems Inc.>
    ===============================================
    And also That the first line in a /apps/bea81/weblogic81/../user_projects/hdw_live/logs/all.log should be
    ============================================
    <Nov 21, 2006 10:46:01 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.4.2
    _04-b05 from Sun Microsystems Inc.>
    =============================================
    In the end we had to restart the server and then it came up allright. This shounds like some kind of environmental resource issue but we don't know? Has anyone seen this kind of behaviour before? Can you suggest a way we can check if their is sufficient resources available if we end up in this situation again?
    Thanks for the benefit of your experience
    Cheers
    Phill ;-)

    Caused By: oracle.xml.parser.v2.XMLParseException: Element 'socketOptions' not expected.
    Caused By: oracle.security.jps.service.igf.IGFException: JPS-02592: Failed to push ldap config data to libOvd for service instance "idstore.ldap" in JPS context "default", cause: oracle.xml.parser.v2.XMLParseException: Element 'socketOptions' not expected.
    Did the installation complete successfully? any errors in the installation log files?
    Thanks,
    Rajiv.

  • CRS not starting after Oracle 11g Grid was succesuflly installed

    Hi:
    Have 2 node RAC. My Shared storage is on openfiler.
    Oracle 11g Grid was successfully installed and all the services was working fine. When i restarted the system I found CRS was not coming up. Remaining processes were up and running.
    Let me explain what I did: (O/s RHEL 5.4 & oracle 11g R2 grid)
    I have a partition in shared disk /dev/sdc1 (I have other partitions, but thought of using only one for OCR and voting disk). (did not define it as raw partition as I used to do in 10g RAC).
    While installing Oracle grid and when it prompted to enter the Diskgroup for OCR and Voting disk I gave a name DGDATA and choose only one (external redundancy) disk “/dev/sdc1″ (it does not ask for one for OCR and one for Voting as it used to do in 10g clusterware installation). As per my assumption both OCR and Voting disk were created within /dev/sdc1 (after installation when I queried I got the same info)
    The Oracle grid installation has gone through successfully. when I restart the system I find CRS not starting.
    The log says: “Error PROC:26: Error while accessing the physical storage ASM……..
    ORA-01034: oracle not available...
    Could not init OCR, code:26….
    Linux permission denied".
    For your information….ASM instance is up (check in both the nodes) and I find the diskgroup mounted.
    Can anyone help on this.
    Also let me know how to uninstall Oracle 11g Grid software and configuration. If I have to reinstall the Oracle 11g grid software and config once again is it possible without reinstalling RHEL. Let me know the steps or any link please. don't want to get into a mess again.
    Thanks in advance.
    Regards
    Dinesh

    Jorg, I even tried to nomount the DB instance using initDBRAC.ora pfile. Then tried to create spfile still got the same error.
    The second trace file which I have pasted looks like some memory dump.
    ASM_DISKSTRING= /dev/sdc*
    ***********************************************************************1st trace file
    Fatal NI connect error 12547, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser)(CONNECT_DATA=(CID=(PROGRAM=oracle@skyit6)(HOST=skyit6)(USER=oracle))))
    VERSION INFORMATION:
    TNS for Linux: Version 11.2.0.1.0 - Production
    Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
    Time: 01-JUN-2011 01:27:07
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12547
    TNS for Linux: Version 11.2.0.1.0 - Production
    Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
    Time: 01-JUN-2011 01:27:07
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12547
    TNS-12547: TNS:lost contact
    ns secondary err code: 12560
    nt main err code: 517
    TNS-00517: Lost contact
    nt secondary err code: 32
    nt OS err code: 0
    ERROR: Failed to connect with connect string: (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser))
    Wed Jun 01 01:27:07 2011
    ERROR: slave communication error with ASM; terminating process 16772
    Errors in file /oraeng/app/oracle/product/diag/rdbms/dbrac/DBRAC/trace/DBRAC_ora_16772.trc:
    ----======================2nd trace file
    Trace file /oraeng/app/oracle/product/diag/rdbms/dbrac/DBRAC/trace/DBRAC_ora_16772.trc
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Real Application Clusters option
    ORACLE_HOME = /oraeng/app/oracle/product/11.2.0
    System name: Linux
    Node name: skyit6
    Release: 2.6.18-164.el5
    Version: #1 SMP Tue Aug 18 15:51:54 EDT 2009
    Machine: i686
    Instance name: DBRAC
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 25
    Unix process pid: 16772, image: oracle@skyit6 (TNS V1-V3)
    *** 2011-06-01 01:27:07.010
    *** SESSION ID:(1.3) 2011-06-01 01:27:07.010
    *** CLIENT ID:() 2011-06-01 01:27:07.010
    *** SERVICE NAME:() 2011-06-01 01:27:07.010
    *** MODULE NAME:(sqlplus@skyit6 (TNS V1-V3)) 2011-06-01 01:27:07.010
    *** ACTION NAME:() 2011-06-01 01:27:07.010
    ERROR: slave communication error with ASM; terminating process 16772
    *** 2011-06-01 01:27:07.035
    dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=2, mask=0x0)
    ----- Error Stack Dump -----
    ----- Current SQL Statement for this session (sql_id=bff5sku8phfgx) -----
    create spfile='+dgasmspfile/spfileDBRAC.ora' from pfile
    *** 2011-06-01 01:27:07.070
    ----- Call Stack Trace -----
    calling call entry argument values in hex
    location type point (? means dubious value)
    skdstdst()+41 call kgdsdst() BF9E05FC ? 2 ?
    ksedst1()+77 call skdstdst() BF9E05FC ? 0 ? 1 ? AB80E70 ?
    852F42A ? AB80E70 ?
    ksedst()+33 call ksedst1() 0 ? 1 ?
    dbkedDefDump()+2699 call ksedst() 0 ? 0 ? BF9E0D40 ? 0 ? 0 ?
    0 ?
    ksedmp()+47 call dbkedDefDump() 2 ? 0 ?
    kfTerminateMe()+75 call ksedmp() 2 ? 3 ? F1170AC ? F149234 ?
    5 ? BF9E0A6C ?
    kfnCheckCommError() call kfTerminateMe() F149234 ? BF9E0C1C ?
    +32 B033D83 ? 29392378 ?
    F149234 ? EB00601 ?
    kfncSlaveSubmit()+5 call kfnCheckCommError() 29392378 ? F149234 ?
    83
    kfncFileDelete()+11 call kfncSlaveSubmit() BF9E0E5C ? 0 ? F147B24 ?
    81
    kfioDelete()+126 call kfncFileDelete() 29DEE0 ? 1C ?
    ksfddel1()+582 call kfioDelete() 29DEE0 ? 1C ? D ?
    ksfddel()+187 call ksfddel1() 29DEE0 ? 1C ? D ? 0 ?
    BF9E0F2C ? 9BA2 ?
    ksp_spfile_create() call ksfddel() 29DEE0 ? 1C ? D ? 0 ?
    +677
    kspcspfp()+791 call ksp_spfile_create() BF9E49D4 ? 0 ? 29DEE0 ? 1C ?
    7D02 ? 0 ?
    kspocte()+67 call kspcspfp() 29DEE0 ? 1C ? F074CC4 ? F ?
    61,1 1%
    Regards
    Dinesh

  • Libre office can not start in arch with lxde (clucene was installed)

    installed Arch on Asus Eee Pc 900 (very old, cpu - 900 MHz, ram 1 G)
    then installed lxde and libre office.
    the problem is that Libre Office can not start and show the message with
    a language I don't understand. It say that:
    LibreOffice 4.0-Fatal Error
    Die toepassing kan nie laat loop word nie.
    'n interne fout het voorgekom.
    so I google and read some post.
    I fount that I may need clucene installed.
    that's why, I installed clucene.
    but problem is still exit.
    any solution, please!
    Last edited by mshan (2013-05-05 13:54:53)

    It doesn't fix the main problem, but read the note and install English langpack https://wiki.archlinux.org/index.php/Li … stallation
    The error message isn't very helpful, it says
    The application can not run.
    An internal error occurred.
    Last edited by karol (2013-05-05 14:17:56)

  • Desktop Software does not start - really not at all

    Hi everybody,
    I hope this is not a common problem...
    I installed the latest version of DM (710_b033_multilanguage) successfully on my PC. 
    Win7 (64bit), 8GB Ram, plenty of Diskspace and sufficient Video HW
    As mentioned the installation was successfully.
    When I start immediately a windows error message pops up, telling me the the Blackberry Desktop Manager does not work anymore (translated from the original German popup) and that Windows is looking for a solution. Sure enough Windows does not find anything and the window disappears without further notification.
    I tried
    - reinatalling
    - repairing
    - installing on SSD as well as on standard HDD
    - searching the blog on "not start"
    - cussing
    - and now posting
    Can anybody help - please?
    Cheers
    T

    Thanks :-)
    but unfortunately it did not work - still the same error:
    Cheers
    Thomas

  • CLI156 Could not start domain domain1 error when J2ee is installed

    Whenever I install J2ee 1.4 sdk the first time the application server starts and everything works fine. But when the system is restarted and the server is started again i get the above mentioned error.
    Domain domina1 failed to startup. Could not start domain domain1. I have installed and uninstalled the application many times but yet I am experiencing the same error.
    Please give me a solution to this error asap.
    Thanks,
    Poonam

    Did you check server log for the exact cause of startup failure? One thing that is possible is that some of the ports associated with server listeners start being used by other processes after system restart (it seems that Windows use ports in 10xx range for remote drive mappings - so that might be one area where you might run into issues). If so, changing server port numbers might help. In any case, check logs for the exact cause of error .

  • I recently have installed Windows XP for my computer, but it does not start my Ipod information although I already installed Itunes. What should I do, if I do not have the CD to install it from there?

    Hello everyone, I recently installed Windows XP in my computer but now it does not start my Ipod classic information even I just have installed Itunes. What should I do if I do not have my CD to get it from there?

    Try using Firefox. Flash usually works on Firefox when it won't on Safari. I noticed that the Safari does not show the same version as Firefox does. Iwonder if that could be the problem. Safari on the left shows 10.1, Firefox show 10.3

  • MacbookPro not starting up, not even the front power light

    Hi,
    When I switch on my MBP, it is not starting up.
    After I press power button, I hear hard disk revving up, it spins for 1-2 secs and then stops with the sound which is made when I switch off my MBP while resetting normally (by keeping the power button pressed for long enough)
    besides the hard disk spinning up for those 2 seconds, there is no other indication of life in MBP, not even the front light is blinking.
    By the way, I have checked battery and power connection, battery is charging normally, and I have tried starting MBP with power cable plugged in with and without the fully charged battery.
    Can this be a RAM issue? Or do you think HDD has crashed?
    Please help in resolving this issue
    thanks

    probably its defective, try taking it to the store, or if you dont have one near try calling apple to see where you can bring it.

Maybe you are looking for