Satellite C660 - Windows Updates keep disabling my wireless.

The last few updates have disabled my wireless and I was only able to get it working again by winding back using System Restore.
The last time this happened (last month) even that didn't fix it and I had to let PC World look at it.
They undid Windows updates one-by-one until they eventually restored the wireless.
Their advice was to NOT let Windows automatically update my PC!
The problem I now have is when should I allow an update?
Sometimes there are important security updates.
How do I discriminate between them and more importantly why is my Toshiba prone to these problems and what is Toshiba doing about preventing them in the first place?

It may seem unlikely, but it happened on 4 seperate occasions. Even PC World said that the updates were the cause (although I'm not too confident of their abilities).
The fact is that after restarting my pc following the updates, my wireless ceased to function. It was all switched on and Control Panel stated all the drivers were current, but I was unable to receive a signal from my router.
Using System Restore I was able to get it going again 3 times, but the last time it wouldn't play, so I resorted to using PC World as I have a Tech Guys contract with them. It took them a day and a half of undoing Windows updates to get it working again and they advised me to disable the automatic updates function.
Since then I haven't installed any updates and I haven't had the problem. Kind of speaks for itself really!

Similar Messages

X220 Windows Automatic Updates Keep Disabling

We have 2 new Thinkpad X220's, both running Win 7 Pro, and they both have this same problem. We have Windows Update set to 'Install Updates Automatically'. Every 30 minutes or so, that setting gets disabled to 'Never Check for Updates'.
I've run scans for malware and viruses but both systems appear to be clean.
Any help would really be appreciated.

If you don't think its a being caused by malware,try re-installing Windows update agent. (or) you can use the built in Diagnostics of Windows 7 to resolve your issue.
Go to Control Panel--> System and Security--> Troubleshoot common computer problems(Under Action center) -->Fix problem with Windows update.
The agent may figure out what went wrong and may give you suggestions or reslve your issue. I hope this heps
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Windows Update Service Disabled - Error 80070422

Hi,
On Windows Vista Ultimate SP1, when I go to Windows Update I see a "Check For Updates" button. When I click it I get an 80070422 error and "Try Again" button which does not work.
I have tried all that is explained in Help on this error, but it's still not working. Let me write in more detail: I opened "Administrative Tools", went to "Services", "Windows Update" service is disabled. I set the "Startup Type" to "Automatic", click on Apply and then I click the "Start" button to start the service. I get an error: 1058: "Windows could not start the Windows Update service on Local Computer", "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it".
I downloaded "WindowsUpdateAgent30-x86.exe" and installed it, hoping that the problem will be fixed, but no luck.
I read somewhere on this forum that a user faced a similar problem and searched in "Windows\System32" for "wu*.*" files and changed the security settings for all of them to allow SYSTEM and Administrators full control and re-registered through "regsvr32" all of the .dll files, but, after doing all of these I still had no luck.
My Windows Update still displays the error 80070422 and when I try to start the Windows Update service I get the error that the service cannot be started and it always sets itself on "Disabled", no matter what I do.
Could someone please help me with this problem? I really don't know what else to do.

Wow, great!
I ran the tool that you mentioned and the virus in question was detected as: Trojan.Vundo
Maybe the logs will help some others, too: Here's the log on the first scan:
Malwarebytes' Anti-Malware 1.14
Database version: 808
8:40:22 PM 5/31/2008
mbam-log-5-31-2008 (20-40-22).txt
Scan type: Full Scan (C:\|D:\|)
Objects scanned: 169731
Time elapsed: 42 minute(s), 47 second(s)
Memory Processes Infected: 0
Memory Modules Infected: 1
Registry Keys Infected: 9
Registry Values Infected: 1
Registry Data Items Infected: 1
Folders Infected: 0
Files Infected: 8
Memory Processes Infected:
(No malicious items detected)
Memory Modules Infected:
C:\Windows\System32\byXOHaBU.dll (Trojan.Vundo) -> Unloaded module successfully.
Registry Keys Infected:
HKEY_CLASSES_ROOT\CLSID\{1449fa3b-f8a5-40ec-87da-707e80637ddd} (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Browser Helper Objects\{1449fa3b-f8a5-40ec-87da-707e80637ddd} (Trojan.Vundo) -> Delete on reboot.
HKEY_CLASSES_ROOT\CLSID\{663656df-6bae-460c-a612-8133df519346} (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\aoprndtws (Malware.Trace) -> Quarantined and deleted successfully.
HKEY_CURRENT_USER\Software\Microsoft\affri (Malware.Trace) -> Quarantined and deleted successfully.
HKEY_CURRENT_USER\Software\Microsoft\rdfa (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\affri (Malware.Trace) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FCOVM (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RemoveRP (Trojan.Vundo) -> Quarantined and deleted successfully.
Registry Values Infected:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ShellExecuteHooks\{663656df-6bae-460c-a612-8133df519346} (Trojan.Vundo) -> Quarantined and deleted successfully.
Registry Data Items Infected:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Authentication Packages (Trojan.Vundo) -> Data: c:\windows\system32\byxohabu -> Quarantined and deleted successfully.
Folders Infected:
(No malicious items detected)
Files Infected:
C:\Windows\System32\byXOHaBU.dll (Trojan.Vundo) -> Delete on reboot.
C:\Users\Shere Khan\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\LK0KREDB\kb516107[1] (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\fccywwts.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\gEwtTLFy.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\yayvSiHb.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\_Shere_Quarantine\fmsnvygd.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\byXnMghG.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\byXPfgfe.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
Here's the log on the second scan, after a restart:
Malwarebytes' Anti-Malware 1.14
Database version: 808
9:48:01 PM 5/31/2008
mbam-log-5-31-2008 (21-48-01).txt
Scan type: Full Scan (C:\|D:\|)
Objects scanned: 168808
Time elapsed: 56 minute(s), 31 second(s)
Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 0
Registry Values Infected: 0
Registry Data Items Infected: 0
Folders Infected: 0
Files Infected: 2
Memory Processes Infected:
(No malicious items detected)
Memory Modules Infected:
(No malicious items detected)
Registry Keys Infected:
(No malicious items detected)
Registry Values Infected:
(No malicious items detected)
Registry Data Items Infected:
(No malicious items detected)
Folders Infected:
(No malicious items detected)
Files Infected:
C:\Windows\System32\byXOHaBU.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\dqhreobq.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
On the third scan, no other infections were found. The files and locations and one or two registry entries are similar to what I suspected was not allright, so I guess the (right) virus has been found and eliminated. Have enabled Java in FireFox and everything seems fine, haven't touched Internet Explorer just to be on the safe side so I can't say anything about that, but everything looks allright. Seems this was the problem. Thanks again, mate, your post was a life saver.

Automatic Windows Update keeps shutting off

I'm running windows 7 64-bit with Windows Defender, Windows firewall and ESET NOD32 anti-virus on a domain network. Automatic updates keep switching from automatic to manual mode several times throughout the day. Updates work fine, they just
don't remain in "auto" mode. I've tried the following to fix the problem with no luck:
1) Windows defender and ESET scans with nothing found
2) Numerous on-line anti-virus / malware scans with nothing found (Housecall, Malwarebytes, etc.)
3) Kapersky root-kit scan with nothing found
4) Windows update Fix-IT applied
5) All update services (BITS, Updater) set to autostart
Any ideas?

Hi,
I would like suggest you try the follwoing suggestions:
1. Boot into
Clean Boot Mode and test the issue.
2. Try System Update Readiness tool by referring to
What is the System Update Readiness Tool?
3. You may try to Reset Windows Update components for check.
Hope this helps.
Regards.
Spencer
TechNet Community Support

Windows Update keeps failing to install 4 recommended KB;s

I have tried 6 times to get these updates to install: KB2515325,KB2522422,KB2492386,KB982018. every time Windows Update says it failed to install them. 2 other Updates KB2310138 and KB2467173 installed succesfully. How do i install/stop these updates as
everytime i reboot i get asked to install them again.
My System specs.
Windows 7 Ultimate
Q9650 cpu
2x 500Gb HDD's (SATA-AHCI)
Powercolor 4870 1GB
8Gb DDR2 1066
cheers
Who cares who wins

Seriously Microsoft?
Here's the thing, I received a call from my dear mom about this issue. She's not computer expert and never will be. She has no idea how to turn anything off from computer. But she's annoyed that she has to start up computer every
single time now twice because some one of Q&A fucked up. Your given solution is Invalid! Please come to solution what even 50 year old can do with out some sort understanding how to go ms config and disable startup programs and
run disk checks.
This update confusion makes me want go and buy my mom Apple, and then you guys have meetings on MS wondering why apple does so good. This is the reason. Everyone aren't computer wizards and rather overpay things on first day than pay
to some long haired WoW player every single time when MS Q&A fuck's up. This is second time in 30 days when I have to travel to my moms house ( 140 miles ) fix something what you guys fucked up.
Next time I send you a bill and you can debate abut it in EU highest court.
Wow, that's pretty harsh, Taavi. You seem to have a pretty narrow-minded idea of how many
hundred of thousands of different configurations Microsoft has to support with a single, unified update system. Go get your mom an Apple - see how that works out for you. Something tells me you haven't
bitched or moaned about the hundreds of other updates that DID seamlessly, automatically and silently install - but now you're all venom and hate towards Microsoft for missing a small detail somewhere in in a massive list of possible configurations.
You might try using RDP or some other readily available tool to allow remote access to the box without having to drive 140 miles to dear mom's house. That's how I take care of my parent's machines, and it's worked well for me. Then again, I like
seeing my parents - any chance I get, and I generally get a home cooked meal out of the deal.
If you can stop acting like a douche bag long enough to actually try and troubleshoot the problem, you likely would have figured out of to solve this issue yourself. You're one of those kinds of people who LOVE to Bandwagon-bash Microsoft
when it's convenient for you, but the rest of the time you silently LOVE to use their products.
Whatever you do, don't give Microsoft any credit for their successes - that bitter pill just might drive you over the edge.
Flames aside, here's what I did to get these particular updates to install. It seems that KB2515325 is the hinge that's making or breaking these installs from working one-after-another. I installed all the updates I could, did a reboot, and was
left with the 4 KB's mentioned. I didn't download the standalone updates, either - I used Windows Update. Here's what I did to get them all to install on my 64-Bit system:
Install KB2492386 by itself - unselect all other updates
Reboot
Install KB2515325 by itself - unselect all other updates
Reboot
Install KB2522422 by itself - unselect all other updates. I was not asked to reboot after this update.
Check for updates again, and you should only have KB982018 left. Install KB982018.
Reboot one last time, then everything will hopefully have taken.
If that works for you, Taavi, be sure and give me your address so I can send
you a bill for providing you step-by-step instructions.
SonarTech

Windows update keeps trying but fails to install HP enterprise WSD multi-function printer update

I don't think we even need this update from Windows update but since upgrade to Windows 10, It keeps popping up as a failed update. I used to be able to HIDE unwanted updates. On this new os, I don't see an option to do that and the Windows 10 help site is NO HELP. Do I really need this and how do I stop the update notices? Thank you

Hi guys
The Acrobat is version 11.0.2 (Danish)
I'm downloading the patch AcrobatUpd11003.msp from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5593
I'm lunching the installed Adobe Acrobat XI it straight away promts me for updating the application through Adobe Updater.
Any Ideas what i can do to solve the problem, i need to deploy the update to quite a lot of pcs so i cant run the update manually.

Satellite C660 - DVD player keeps ejecting

Hi
This is a problem that has only just started. Every time I power notebook up the first thing it does is eject the DVD player which is empty. It also does the same after power save mode has been on. Notebook runs fine otherwise, its not a major problem, just annoying.
Any help would be much appreciated.
Thanks.

Hi Darkhorse99,
To be honest this must be a malfunction of CD/DVD drive. I dont have another explanation for this strange behavior.
How old is your Satellite C660?
If its still under warranty an authorized service provider can replace the drive for free.
Have a look here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider

Windows update keeps updating automatically

Hello,
We currently have a windows server 2012 in our office and I've set automatic updates to 'download but let me install them'. Reason for this is that Windows automatically would restart the server when everyone is working in the office, and every time I've
changed the settings to 'download but let me install them' - windows changes the settings back to automatically install updates a few sign ins later. This is becoming a problem. Do you know how to change this?

Hi Michael,
Thank you for your posting in Windows Server Forum.
Firstly suggest you to try resetting windows update components by following link.
How do I reset Windows Update components?
In addition, please try to configure the GPO setting according to the below mention link and check the result.
No auto-restart for scheduled Automatic Updates installations
More information.
1. How to configure automatic updates by using Group Policy or registry settings
2. Windows Update and Automatic Reboots
Hope it helps!
Thanks.
Dharmesh Solanki

Windows Updates keeps BREAKING Office 2013, SkyDrive, ETC

Everytime I do the Updates my system and Office 2013 becomes completely unstable.
As a result I only do upgrades every 2 weeks. On Friday, April 24 I sat down to do my 2 week update and had almost 40 updates that had to be done. (goodbye 4 hours of my life)
After the updates, just like clockwork, office, sharepoint and onedrive stopped working. I am going to try to provide as much detail as possible so as to notify Microsost in hopes this stop and in case anyone else has the issues. I will also provide
the steps I took to fix some of the issues.
Note:
I am running Windows 8.1, 64-bit on HP-ENVY 17" touch laptop
I DO NOT have any virus', malware, etc. I have ran MalwareBytes, Windows Defender and Webroot (as I always do before and after updates)
I have office 2013 and subscribe to office 365 for business - I have a license key for Office 2013 but was told somewhere that it conflicts with the click-to-run we are forced to use with 365 so I only do the office 365 version
I do have Sharepoint Designer on my system as I am the administrator of our sharepoint site
I access our sharepoint documents via Windows Explorer
After the updates I have experienced the following
I tried to open a ppt, xls and doc file and nothing would open giving random errors. I then did the control panel --> office click to run --> change --> reinstall everything. I did this and then some of the documents opened fine (goodbye
another hour of my life)
After trying to open a file from my windows explorer in our sharepoint site I get a continuous and recoccuring popup from Microsoft OneDrive for Business that says "Sorry, we can't perform this action. Incompatible Office Products are installed
on your machine. If you have an administrator, please contact them for help." (The last part just makes me laugh because I AM the administrator)
This annoying popup NEVER stops. It keeps popping up every 60 seconds if I close it. I have kiiled the onedrive process, paused the syncing, killed the office click-to-run task. Shut down all office products. Nothing makes this stop except for a full reboot
Please HELP or tell me what to do so that I can once again open my sharepoint files (and all of my employees can do so as well!)

Hi,
"I tried to open a ppt, xls and doc file and nothing would open giving random errors." Could you please provide some of these errors to me? Then I can do some research based on the errors.
Based on your error message, please make sure you have installed this update:
February 10, 2015 update for Office 2013 (KB2920798)
We can also collect some event logs after the issues occur, press Win + R, type "eventvwr" in the blank box, press Enter.
Browse to Windows Logs -> Application, check if there are any logs about the issue.
You can send the logs to our email address, we will then help analyze the information. Please send the logs to this email address below:
[email protected]
Please add this thread's url in the email for easy tracking.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here.

Microphone not working - Satellite C660 - Windows 7

Hi,
My microphone is not working. Not even while chatting or even after using Sound Recorder. Have tried many online forums but all in vain. Got my laptop rectified in a Toshiba authorised service center, but its hardly been a week, and the same problem has again starte. Please help.
Thanks a lot.

You should contact them again to let them know that the repair didn't work.
- Peter

Disable USB driver installation from searching Windows Updates for software

Hello,
When a plug-n-play device is connected to a Windows 7 system, the system by default tries to search Windows update for compatible drivers. I have a preconfigured driver store on each system that will have the drivers for all of the USB devices we care
about so I'd like to search the local driver store first before searching for Windows updates.
I found the option that controls this under System Properties > Advanced system settings > Hardware tab > Device Installation Settings. I have set this option before my machines run through sysprep, however, sysprep appears to be resetting
the option back to the Windows default (Yes, do this automatically) and ignores what I set it to.
I have a reg key that I'm running post-sysprep, but I'd like to avoid this as it's an extra step and I don't want to have to account for it long-term. My question is, is there a way to set this option in my sysprep unattend file?

If this is a domain joined machine, this can be set by a Group Policy Object;
Open Group Policy Management Editor.
In the navigation pane, open Computer Configuration\Administrative Templates\System\Internet Communication Management\Internet
Communication settings.
In the details pane, double-click Turn off Windows Update device driver searching.
Do one of the following:
To turn off searching Windows Update, click Enabled.
To allow searching Windows Update, click Disabled.
Click OK to save your settings.
Instructions taken from: http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
If this PC is not on the domain (but is Pro) you may be able to set the same option on the Local Group Policy (GPEDIT.MSC).
Kind Regards
Barry

Windows Update Service Enabled after OSD

OSD build and capture of win7 x64 with Windows Update
service disabled, enables itself after TS/Imaging process. Anyone know why this happens or how I can permanently disable...it is for a public facing machine I do not wish to ever update. Turning off automatic updates doesn't seem to do the trick...it
still updates periodically when reboot. Thanks in advance!

I'm pretty sure it's started by the client.
Why not create some maintenance windows for your devices for updates and thaw the machines during the MW? You can therefore keep your machines patched.
Yeah I've had the pleasure of Deep Freeze before.
Cheers Paul | http://sccmentor.wordpress.com

Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server

Hello everyone, I've looked around at other threads related to my issue, and I can't seem to find a correct answer.
I have a computer lab that I've recently installed a Windows 7 Enterprise image onto 35 Dell Optiplex computers (most are 380's, a few older 360's).
I created the image using MDT2010 and used one of the 380's as a reference.
All has been well for about a month or two but recently 6 computers are giving me Windows Update errors with the error code of 80080005.
I have a WSUS 3.0 SP2 server running, and all of my other computers seem to be getting their updates just fine. WSUS has the problematic computers in it's database, but it shows that they haven't checked in for "x" days.
I have Avast 4.8 Professional installed, I have OpenDNS configured to block bad websites, ____, etc. and I also use an Untangle server to prevent access to bad websites. I've ran a Malwarebytes' Anti-Malware scan on the affected computers, as well
as Windows Defender scan, and Windows Live OneCare scans, and all have found no malicious software.
I have also tried resetting the Windows update service as described here: http://support.microsoft.com/kb/971058 as well as a script that supposedly does the same thing, but also resets all previous
update events, but I can't find the script source right now (I had ran it last week, and it didn't work).
I'm currently running a SFC /Scannow on one of the computers, and now it has finished. It gives the error: Windows Resource Protection could not start the repair service. I'll have to google that next.
The last windows update that ran on the computer that I'm working on now was installed on 11-18-2010 and was a Windows Defender Update (KB915597 Def: 1.93.1985.0)
Previous to that was 11/9/2010 2 updates: KB977165 and KB981852.
I guess I'll have to look at all of the other machines to see if they have the same updates installed.
Anyway, has anyone else had this problem? I've seen vista home editions, and RC's but no real Windows 7 Pro+ RTM versions in business environments where updates were controlled by WSUS.
Thanks for any help that you can provide!
By the way, I only work at this location once a week (tuesdays, well thursdays too, but I'm next door to this building, but I have remote access), so bare with me on trying to fix things.

Ok, for the sake of completeness, I have completed the instructions given by Miya Yao.
After stopping the Windows Update Service (from an Admin Command prompt window), renaming the SoftwareDistribution folder to SDold, then starting the update service again, I still receive the same error when checking for updates.
The windows update log shows this (starting from about 4am) and I just reset the service at about 9:10, which you can see in the log.
2010-12-21 04:19:02:342 940 f20 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 04:19:02:342 940 cd4 AU >>## RESUMED ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 04:19:02:342 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 04:19:02:342 940 cd4 AU #########
2010-12-21 04:19:02:342 940 cd4 AU ## END ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU #############
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU AU setting next detection timeout to 2010-12-21 14:19:02
2010-12-21 04:19:02:342 940 cd4 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:07:350 940 f20 Report REPORT EVENT: {A472759C-BEE7-4161-84E8-41F1C1D03AB4} 2010-12-21 04:19:02:342-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 04:19:07:350 940 f20 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 04:19:07:350 940 f20 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 04:19:07:350 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:24:22:767 940 f20 PT WARNING: Cached cookie has expired or new PID is available
2010-12-21 04:24:22:767 940 f20 PT Initializing simple targeting cookie, clientId = a6d6dc1c-d844-451c-8609-3879e6cacb33, target group = , DNS name = lab24.sja.local
2010-12-21 04:24:22:767 940 f20 PT Server URL = http://server2:8530/SimpleAuthWebService/SimpleAuth.asmx
2010-12-21 04:24:22:814 940 f20 Report Uploading 2 events using cached cookie, reporting URL = http://server2:8530/ReportingWebService/ReportingWebService.asmx
2010-12-21 04:24:22:814 940 f20 Report Reporter successfully uploaded 2 events.
2010-12-21 06:59:23:020 940 b4c AU AU was unable to detect updates for more than 48 hours
2010-12-21 06:59:28:027 940 c78 Report REPORT EVENT: {511B1C92-939C-4E97-A51B-50E75FCB7AEF} 2010-12-21 06:59:23:020-0500 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.
2010-12-21 06:59:28:027 940 c78 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:02:03:476 940 2f4 AU Triggering AU detection through DetectNow API
2010-12-21 09:02:03:476 940 2f4 AU Triggering Online detection (interactive)
2010-12-21 09:02:03:476 940 b4c AU #############
2010-12-21 09:02:03:476 940 b4c AU ## START ## AU: Search for updates
2010-12-21 09:02:03:477 940 b4c AU #########
2010-12-21 09:02:03:488 940 b4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:03:488 940 e38 Agent *************
2010-12-21 09:02:03:488 940 e38 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:03:488 940 e38 Agent *********
2010-12-21 09:02:03:488 940 e38 Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:02:03:488 940 e38 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:02:03:488 940 e38 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:02:03:488 940 e38 Agent * Search Scope = {Machine}
2010-12-21 09:02:03:488 940 e38 Setup Checking for agent SelfUpdate
2010-12-21 09:02:03:489 940 e38 Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:02:03:489 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:03:496 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:071 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:06:078 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:080 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:087 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:100 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:107 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:123 940 e38 Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:02:06:123 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2010-12-21 09:02:06:129 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:129 940 e38 Setup SelfUpdate handler update NOT required: Current version: 7.4.7600.226, required version: 7.4.7600.226
2010-12-21 09:02:06:129 940 e38 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:02:15:386 940 b4c AU AU received policy change subscription event
2010-12-21 09:02:36:165 940 e38 Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent *********
2010-12-21 09:02:36:165 940 e38 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:36:165 940 e38 Agent *************
2010-12-21 09:02:36:165 940 e38 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:02:36:165 940 e8c AU >>## RESUMED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:02:36:165 940 e8c AU #########
2010-12-21 09:02:36:165 940 e8c AU ## END ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU #############
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU AU setting next detection timeout to 2010-12-21 19:02:36
2010-12-21 09:02:36:165 940 e8c AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:41:172 940 e38 Report REPORT EVENT: {678C2913-B3B3-4F14-9310-C2E2B1F3334A} 2010-12-21 09:02:36:165-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 09:02:41:172 940 e38 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 09:02:41:172 940 e38 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 09:02:41:172 940 e38 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:07:779 940 b4c AU ########### AU: Uninitializing Automatic Updates ###########
2010-12-21 09:06:37:809 940 b4c Handler FATAL: UH: 0x80080005: StartSession failed in CCbs::IsCbsPending
2010-12-21 09:06:37:840 940 b4c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:37:872 940 b4c Service *********
2010-12-21 09:06:37:872 940 b4c Service ** END ** Service: Service exit [Exit code = 0x240001]
2010-12-21 09:06:37:872 940 b4c Service *************
2010-12-21 09:08:37:104 940 e84 Misc =========== Logging initialized (build: 7.4.7600.226, tz: -0500) ===========
2010-12-21 09:08:37:104 940 e84 Misc = Process: C:\Windows\system32\svchost.exe
2010-12-21 09:08:37:104 940 e84 Misc = Module: c:\windows\system32\wuaueng.dll
2010-12-21 09:08:37:104 940 e84 Service *************
2010-12-21 09:08:37:104 940 e84 Service ** START ** Service: Service startup
2010-12-21 09:08:37:104 940 e84 Service *********
2010-12-21 09:08:37:108 940 e84 Agent * WU client version 7.4.7600.226
2010-12-21 09:08:37:108 940 e84 Agent * Base directory: C:\Windows\SoftwareDistribution
2010-12-21 09:08:37:108 940 e84 Agent * Access type: No proxy
2010-12-21 09:08:37:108 940 e84 Agent * Network state: Connected
2010-12-21 09:08:37:453 940 e84 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2010-12-21 09:08:37:462 940 e84 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2010-12-21 09:08:37:464 940 e84 Agent WARNING: failed to access the auth cab, fatal error 0x80070003
2010-12-21 09:08:37:464 940 e84 Agent WARNING: Invalid service in the backup data store; cleaning up
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Failed to add and register service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0x80240031
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Default Service Recovery: Attempting to add pending registration for service 7971f918-a847-4430-9279-4a52d1efe18d to the data store
2010-12-21 09:09:22:474 940 e84 Report CWERReporter::Init succeeded
2010-12-21 09:09:22:474 940 e84 Agent *********** Agent: Initializing Windows Update Agent ***********
2010-12-21 09:09:22:475 940 e84 Agent *********** Agent: Initializing global settings cache ***********
2010-12-21 09:09:22:475 940 e84 Agent * WSUS server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * WSUS status server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * Target group: (Unassigned Computers)
2010-12-21 09:09:22:475 940 e84 Agent * Windows Update access disabled: No
2010-12-21 09:09:22:475 940 e84 DnldMgr Download manager restoring 0 downloads
2010-12-21 09:09:22:476 940 e84 AU ########### AU: Initializing Automatic Updates ###########
2010-12-21 09:09:22:477 940 e84 AU # WSUS server: http://server2:8530
2010-12-21 09:09:22:477 940 e84 AU # Detection frequency: 22
2010-12-21 09:09:22:477 940 e84 AU # Approval type: Scheduled (Policy)
2010-12-21 09:09:22:477 940 e84 AU # Scheduled install day/time: Every day at 3:00
2010-12-21 09:09:22:477 940 e84 AU # Auto-install minor updates: Yes (Policy)
2010-12-21 09:09:22:478 940 e84 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:09:22:751 940 e84 Report *********** Report: Initializing static reporting data ***********
2010-12-21 09:09:22:751 940 e84 Report * OS Version = 6.1.7600.0.0.65792
2010-12-21 09:09:22:751 940 e84 Report * OS Product Type = 0x00000004
2010-12-21 09:09:22:772 940 e84 Report * Computer Brand = Dell Inc.
2010-12-21 09:09:22:772 940 e84 Report * Computer Model = OptiPlex 380
2010-12-21 09:09:22:775 940 e84 Report * Bios Revision = A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Release Date = 2010-03-11T00:00:00
2010-12-21 09:09:22:775 940 e84 Report * Locale ID = 1033
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:777 940 e84 AU Initializing featured updates
2010-12-21 09:09:22:777 940 e84 AU Found 0 cached featured updates
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU AU finished delayed initialization
2010-12-21 09:09:27:781 940 36c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:10:20:421 940 bf0 AU Triggering AU detection through DetectNow API
2010-12-21 09:10:20:422 940 bf0 AU Triggering Online detection (interactive)
2010-12-21 09:10:20:422 940 e84 AU #############
2010-12-21 09:10:20:422 940 e84 AU ## START ## AU: Search for updates
2010-12-21 09:10:20:422 940 e84 AU #########
2010-12-21 09:10:20:425 940 e84 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:20:425 940 36c Agent *************
2010-12-21 09:10:20:425 940 36c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:20:425 940 36c Agent *********
2010-12-21 09:10:20:425 940 36c Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:10:20:425 940 36c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:10:20:425 940 36c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:10:20:425 940 36c Agent * Search Scope = {Machine}
2010-12-21 09:10:20:425 940 36c Setup Checking for agent SelfUpdate
2010-12-21 09:10:20:426 940 36c Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:10:22:715 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:10:22:725 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:745 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:10:22:750 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:765 940 36c Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:10:22:765 940 36c Setup SelfUpdate handler is not found. It will be downloaded
2010-12-21 09:10:22:765 940 36c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:10:52:778 940 36c Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent *********
2010-12-21 09:10:52:779 940 36c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:52:779 940 36c Agent *************
2010-12-21 09:10:52:779 940 36c Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:10:52:779 940 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:10:52:780 940 ba0 AU #########
2010-12-21 09:10:52:780 940 ba0 AU ## END ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU #############
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:783 940 ba0 AU AU setting next detection timeout to 2010-12-21 19:10:52
2010-12-21 09:10:52:783 940 ba0 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:784 940 ba0 AU Successfully wrote event for AU health state:0

Windows 8.1 Professional x64: Windows will not run Windows Update after fresh install

Greetings everyone. I'm having a strange issue that I can't seem to figure out. I'm developing an image with the following specs:
Hardware:
Dell XPS 12 Ultrabook Convertible
Haswell i7
8 GB RAM
256 SSD HD
Software:
Windows 8.1 Professional x64
Problem description:
After formatting and partitioning the hard drive (UEFI) with a corporate copy of Windows 8.1 x64, the laptop is booted up in Audit mode. No OEM drivers or software is installed. Windows is then activated to the KMS server and verified.
I then connect to a hotspot (no proxy required) and open up IE 11. I click tools and select Windows Update. The laptop then searches and searches for updates and never finds any. I've let it search for over 10 hours. The laptop never
returns an error message.
Troubleshooting performed:
1. I've tried different copies of Windows 8.1 - same result.
2. I've tried installing the OS with different types of media (external hd and multiple bootable USB drives) - same result.
3. I've disable the Windows Update service, deleted the contents of the SoftwareDistribution folder, restarted the Windows Update service and rebooted laptop - same result
4. I've installed this copy of Windows 8.1 on different models of laptops with no OEM drivers or software installed - same result.
5. I've installed all of the OEM device drivers in the correct order and ensured that the device manager is clear of bang signs - same result.
6. Date and time is set correctly.
Has anyone else experienced this with Windows 8.1 x64? If I take a copy of Windows 7 x64 or 8 x64 and install it on this laptop, it updates Windows without any issues. The problem seems to be with Windows 8.1.
Thank you in advance for any help you can provide.

2014-03-04 13:49:52:826
888 9f8
Misc =========== Logging initialized (build: 7.9.9600.16403, tz: -0800) ===========
2014-03-04 13:49:52:826
888 9f8
Misc = Process: C:\Windows\system32\svchost.exe
2014-03-04 13:49:52:826
888 9f8
Misc = Module: c:\windows\system32\wuaueng.dll
2014-03-04 13:49:52:826
888 9f8
Service *************
2014-03-04 13:49:52:826
888 9f8
Service ** START ** Service: Service startup
2014-03-04 13:49:52:826
888 9f8
Service *********
2014-03-04 13:49:52:842
888 9f8
Agent * WU client version 7.9.9600.16403
2014-03-04 13:49:52:842
888 9f8
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-03-04 13:49:52:842
888 9f8
Agent * Access type: No proxy
2014-03-04 13:49:52:842
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:49:52:842
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 13:49:52:842
888 9f8
Agent * Network state: Connected
2014-03-04 13:49:52:858
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:49:52:858
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 13:49:53:045
888 9f8
DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2014-03-04 13:49:53:045
888 9f8
DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-03-04 13:49:53:045
888 9f8
DtaStor Data store successfully created
2014-03-04 13:49:53:061
888 9f8
Agent *********** Agent: Initializing global settings cache ***********
2014-03-04 13:49:53:061
888 9f8
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-03-04 13:49:53:061
888 9f8
Agent * WSUS server: <NULL>
2014-03-04 13:49:53:061
888 9f8
Agent * WSUS status server: <NULL>
2014-03-04 13:49:53:061
888 9f8
Agent * Target group: (Unassigned Computers)
2014-03-04 13:49:53:061
888 9f8
Agent * Windows Update access disabled: No
2014-03-04 13:49:53:076
888 9f8
WuTask WuTaskManager delay initialize completed successfully..
2014-03-04 13:49:53:076
888 9f8
Report CWERReporter::Init succeeded
2014-03-04 13:49:53:076
888 9f8
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-03-04 13:49:53:076
888 9f8
DnldMgr Download manager restoring 0 downloads
2014-03-04 13:49:53:092
888 9f8
AU ########### AU: Initializing Automatic Updates ###########
2014-03-04 13:49:53:092
888 9f8
AU AIR Mode is enabled
2014-03-04 13:49:53:092
888 9f8
AU # AU is not configured yet
2014-03-04 13:49:53:092
888 9f8
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 13:49:53:092
888 9f8
AU # Accelerated install is required
2014-03-04 13:49:53:092
888 9f8
Agent Switching to hardware-verified ClientId.
2014-03-04 13:49:53:092
888 9f8
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
2014-03-04 13:49:53:108
888 9f8
AU AU finished delayed initialization
2014-03-04 13:49:53:108
888 8c4
IdleTmr Incremented idle timer priority operation counter to 1
2014-03-04 13:49:53:108
888 13c
DnldMgr Asking handlers to reconcile their sandboxes
2014-03-04 13:49:57:239
888 af8
AU ########### AU: Setting new AU options ###########
2014-03-04 13:49:57:239
888 af8
AU Setting AU Approval Type to 4
2014-03-04 13:49:57:239
888 af8
AU # Policy changed, AU refresh required = Yes
2014-03-04 13:49:57:239
888 af8
AU # Approval type: Scheduled (User preference)
2014-03-04 13:49:57:239
888 af8
AU # Auto-install minor updates: Yes (User preference)
2014-03-04 13:49:57:239
888 af8
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 13:49:57:239
888 af8
AU # Accelerated install is required
2014-03-04 13:49:57:239
888 af8
AU AU Refresh required....
2014-03-04 13:49:57:239
888 af8
AU AU setting next detection timeout to 2014-03-04 21:49:57
2014-03-04 13:49:57:239
888 af8
AU AIR Mode is enabled
2014-03-04 13:49:57:239
888 af8
AU AIR Mode is disabled
2014-03-04 13:49:57:239
888 af8
AU Accelerate Install required state reset
2014-03-04 13:49:57:239
888 af8
AU Triggering Online detection (interactive)
2014-03-04 13:49:57:239
888 9f8
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 13:49:57:239
888 9f8
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 13:49:57:239
888 9f8
AU All AU searches complete.
2014-03-04 13:49:57:239
888 9f8
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 13:49:57:239
888 9f8
AU AU setting next detection timeout to 2014-03-04 22:19:57
2014-03-04 13:49:57:239
888 9f8
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 13:53:34:838
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:53:34:838
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:54:16:402
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:54:16:417
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:58:48:942
888 6d4
IdleTmr Decremented idle timer priority operation counter to 0
2014-03-04 13:58:56:990
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:58:57:022
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:57:272
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:58:58:830
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2014-03-04 13:58:58:846
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:58:877
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:58:58:892
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:59:267
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:59:01:937
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:59:01:937
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:59:01:953
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 14:08:49:957
888 9f8
AU ########### AU: Uninitializing Automatic Updates ###########
2014-03-04 14:08:50:007
888 9f8
WuTask Uninit WU Task Manager
2014-03-04 14:08:50:219
888 9f8
Service *********
2014-03-04 14:08:50:219
888 9f8
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-03-04 14:08:50:219
888 9f8
Service *************
2014-03-04 14:13:11:111
888 ba4
Misc =========== Logging initialized (build: 7.9.9600.16403, tz: -0800) ===========
2014-03-04 14:13:11:111
888 ba4
Misc = Process: C:\Windows\system32\svchost.exe
2014-03-04 14:13:11:111
888 ba4
Misc = Module: c:\windows\system32\wuaueng.dll
2014-03-04 14:13:11:111
888 ba4
Service *************
2014-03-04 14:13:11:111
888 ba4
Service ** START ** Service: Service startup
2014-03-04 14:13:11:111
888 ba4
Service *********
2014-03-04 14:13:11:126
888 ba4
Agent * WU client version 7.9.9600.16403
2014-03-04 14:13:11:126
888 ba4
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-03-04 14:13:11:126
888 ba4
Agent * Access type: No proxy
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 14:13:11:126
888 ba4
Agent * Network state: Connected
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 14:13:11:142
888 ba4
Agent *********** Agent: Initializing global settings cache ***********
2014-03-04 14:13:11:142
888 ba4
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-03-04 14:13:11:142
888 ba4
Agent * WSUS server: <NULL>
2014-03-04 14:13:11:142
888 ba4
Agent * WSUS status server: <NULL>
2014-03-04 14:13:11:142
888 ba4
Agent * Target group: (Unassigned Computers)
2014-03-04 14:13:11:142
888 ba4
Agent * Windows Update access disabled: No
2014-03-04 14:13:11:142
888 ba4
WuTask WuTaskManager delay initialize completed successfully..
2014-03-04 14:13:11:142
888 ba4
Report CWERReporter::Init succeeded
2014-03-04 14:13:11:142
888 ba4
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-03-04 14:13:11:142
888 ba4
DnldMgr Download manager restoring 0 downloads
2014-03-04 14:13:11:142
888 ba4
AU ########### AU: Initializing Automatic Updates ###########
2014-03-04 14:13:11:142
888 ba4
AU AIR Mode is disabled
2014-03-04 14:13:11:142
888 ba4
AU # Approval type: Scheduled (User preference)
2014-03-04 14:13:11:142
888 ba4
AU # Auto-install minor updates: Yes (User preference)
2014-03-04 14:13:11:142
888 ba4
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 14:13:11:142
888 ba4
Agent Switching to hardware-verified ClientId.
2014-03-04 14:13:11:142
888 ba4
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
2014-03-04 14:13:11:158
888 ba4
AU AU finished delayed initialization
2014-03-04 14:13:11:158
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:13:11:158
888 764
IdleTmr Incremented idle timer priority operation counter to 1
2014-03-04 14:13:11:158
888 10c
DnldMgr Asking handlers to reconcile their sandboxes
2014-03-04 14:13:13:353
888 764
AU Triggering AU detection through DetectNow API
2014-03-04 14:13:13:353
888 764
AU Triggering Online detection (interactive)
2014-03-04 14:13:13:353
888 ba4
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 14:13:13:353
888 ba4
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 14:13:13:353
888 ba4
AU All AU searches complete.
2014-03-04 14:13:13:353
888 ba4
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 14:13:13:353
888 ba4
AU AU setting next detection timeout to 2014-03-04 22:43:13
2014-03-04 14:13:13:353
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:43:13:405
888 ba4
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 14:43:13:405
888 ba4
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 14:43:13:405
888 ba4
AU All AU searches complete.
2014-03-04 14:43:13:405
888 ba4
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 14:43:13:405
888 ba4
AU AU setting next detection timeout to 2014-03-04 23:13:13
2014-03-04 14:43:13:405
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:47:37:066
888 764
IdleTmr Decremented idle timer priority operation counter to 0

Windows Update fails on Server 2012 R2 Virtual Machine

I have set up a virtual network with two virtual machines. The first VM is Server 2008 R2 and is set up as a domain controller. The second VM is Server 2012 R2, and has been joined to the domain. The DC (TestVM1) is also set up as a DNS server.
From TestVM2 (Server 2012 R2), I am able to log in using a domain login, and I am able to browse to a public website.
I was able to run Windows Updates from TestVM1, but when I attempt to run Windows Updates from TestVM2, it fails.
The Windows Update client shows "Error(s) found:" and "Code 8024402F".
Errors in WindowsUpdate.log include
2014-10-17 18:26:14:235 800 950 Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-10-17 18:26:26:238 800 950 Misc WARNING: Send failed with hr = 80072ee7.
2014-10-17 18:26:26:238 800 950 Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-10-17 18:26:26:238 800 950 Misc WARNING: Send request failed, hr:0x80072ee7
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://v4.download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab>.
error 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CID failed. error 0x80072ef3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Provider for error reporting, hr = 0X80072EF3
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CCC failed. error 0x80072ef3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Country for error reporting, hr = 0X80072EF3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: Failed to download cab file from
http://download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab with error 0x8024402c
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 34, Old Count = 60
2014-10-17 18:26:26:317 800 950 PT   + SyncUpdates round trips: 1
2014-10-17 18:26:26:317 800 950 PT WARNING: Sync of Updates: 0x8024402f
2014-10-17 18:26:26:317 800 950 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
2014-10-17 18:26:26:317 800 950 Agent   * WARNING: Failed to synchronize, error = 0x8024402F
2014-10-17 18:26:26:317 800 950 Agent   * WARNING: Exit code = 0x8024402F
This is blocking further work. Assistance would be greatly appreciated.

I am having the exact same issue. Fresh build of Server 2012 R2 from the Microsoft Volume Licensing ISO. I tried before and after joining to the domain. Same error every time. Firewall is turned off. No AV. We do have a cloud proxy service, but I bypassed
that as a test and got the same error message. I also tried to stop wuauserv and cleaning out the folder and starting it back up. No joy as well. This is a VM server running on ESXi 5.1.  Server 2008 servers dont seem to have
an issue. Server 2012 server don't seem to have an issue. Only this new Server 2012 R2 server. My logs are below:
2014-10-28 14:28:46:104 696 4a4 AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-28 14:28:46:104 696 4a4 WuTask Uninit WU Task Manager
2014-10-28 14:28:46:198 696 4a4 Service *********
2014-10-28 14:28:46:198 696 4a4 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-28 14:28:46:198 696 4a4 Service *************
2014-10-28 14:29:24:198 696 5c8 Misc =========== Logging initialized (build: 7.9.9600.17092, tz: -0400) ===========
2014-10-28 14:29:24:198 696 5c8 Misc   = Process: C:\Windows\system32\svchost.exe
2014-10-28 14:29:24:198 696 5c8 Misc   = Module: c:\windows\system32\wuaueng.dll
2014-10-28 14:29:24:198 696 5c8 Service *************
2014-10-28 14:29:24:198 696 5c8 Service ** START ** Service: Service startup
2014-10-28 14:29:24:198 696 5c8 Service *********
2014-10-28 14:29:24:214 696 5c8 Agent   * WU client version 7.9.9600.17092
2014-10-28 14:29:24:214 696 5c8 Agent   * Base directory: C:\Windows\SoftwareDistribution
2014-10-28 14:29:24:214 696 5c8 Agent   * Access type: No proxy
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Agent   * Network state: Connected
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-10-28 14:29:24:510 696 5c8 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2014-10-28 14:29:24:510 696 5c8 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-10-28 14:29:24:542 696 5c8 DtaStor Data store successfully created
2014-10-28 14:29:24:542 696 5c8 Agent *********** Agent: Initializing global settings cache ***********
2014-10-28 14:29:24:542 696 5c8 Agent   * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-10-28 14:29:24:542 696 5c8 Agent   * WSUS server: <NULL>
2014-10-28 14:29:24:542 696 5c8 Agent   * WSUS status server: <NULL>
2014-10-28 14:29:24:542 696 5c8 Agent   * Target group: (Unassigned Computers)
2014-10-28 14:29:24:542 696 5c8 Agent   * Windows Update access disabled: No
2014-10-28 14:29:24:542 696 5c8 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2014-10-28 14:29:24:542 696 5c8 WuTask WuTaskManager delay initialize completed successfully..
2014-10-28 14:29:24:542 696 5c8 Report WARNING: Failed to initialize event uploader for new server {9482F4B4-E343-43B6-B170-9A65BC822C77} with hr = 8024043d.
2014-10-28 14:29:24:542 696 5c8 Report CWERReporter::Init succeeded
2014-10-28 14:29:24:542 696 5c8 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-10-28 14:29:24:542 696 5c8 DnldMgr Download manager restoring 0 downloads
2014-10-28 14:29:24:557 696 5c8 AU ########### AU: Initializing Automatic Updates ###########
2014-10-28 14:29:24:557 696 5c8 AU AIR Mode is disabled
2014-10-28 14:29:24:557 696 5c8 AU   # AU disabled through User preference
2014-10-28 14:29:24:557 696 5c8 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-28 14:29:24:557 696 5c8 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-10-28 14:29:24:557 696 5c8 AU AU finished delayed initialization
2014-10-28 14:29:24:557 696 234 DnldMgr Asking handlers to reconcile their sandboxes
2014-10-28 14:29:35:776 696 578 IdleTmr Incremented idle timer priority operation counter to 1
2014-10-28 14:29:37:307 696 52c AU Triggering AU detection through DetectNow API
2014-10-28 14:29:37:307 696 52c AU Triggering Online detection (interactive)
2014-10-28 14:29:37:323 696 5c8 AU #############
2014-10-28 14:29:37:323 696 5c8 AU ## START ## AU: Search for updates
2014-10-28 14:29:37:323 696 5c8 AU #########
2014-10-28 14:29:37:323 696 5c8 SLS Retrieving SLS response from server...
2014-10-28 14:29:37:323 696 5c8 SLS Making request with URL
HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: Proxy List used: <172.25.7.9:80> Bypass List used : <(null)> Auth Schemes used : <None>
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: Send request failed, hr:0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092>.
error 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 SLS FATAL: SLS:CSLSDownloader::GetUrlContent: DoFileDownload failed with 0x80072ee2.
2014-10-28 14:29:58:339 696 5c8 SLS FATAL: GetResponse failed with hresult 0x80072ee2...
2014-10-28 14:29:58:339 696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetEndpointFromSLS - Failed to get client data and init parser, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 Agent WARNING: Failed to obtain the authorization cab URL for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0
2014-10-28 14:29:58:339 696 5c8 Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80072EE2
2014-10-28 14:29:58:339 696 5c8 IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 7; does use network; is not at background priority
2014-10-28 14:29:58:339 696 5c8 IdleTmr Incremented PDC RefCount for Network to 1
2014-10-28 14:29:58:339 696 5c8 IdleTmr Incremented idle timer priority operation counter to 2
2014-10-28 14:29:58:385 696 5c8 Report *********** Report: Initializing static reporting data ***********
2014-10-28 14:29:58:385 696 5c8 Report   * OS Version = 6.3.9600.0.0.196880
2014-10-28 14:29:58:385 696 5c8 Report   * OS Product Type = 0x00000007
2014-10-28 14:29:58:401 696 5c8 Report   * Computer Brand = VMware, Inc.
2014-10-28 14:29:58:401 696 5c8 Report   * Computer Model = VMware Virtual Platform
2014-10-28 14:29:58:401 696 5c8 Report   * Platform Role = 1
2014-10-28 14:29:58:401 696 5c8 Report   * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Revision = 6.00
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Release Date = 2013-08-16T00:00:00
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Sku Number unavailable.
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Vendor = Phoenix Technologies LTD
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Family unavailable.
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Major Release = 4
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Minor Release = 6
2014-10-28 14:29:58:401 696 5c8 Report   * Locale ID = 1033
2014-10-28 14:29:58:401 696 5c8 Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:401 696 5c8 AU <<## SUBMITTED ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:29:58:432 696 b0c Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:432 696 b0c Agent *************
2014-10-28 14:29:58:432 696 b0c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:432 696 b0c Agent *********
2014-10-28 14:29:58:432 696 b0c Agent   * Online = Yes; Ignore download priority = No
2014-10-28 14:29:58:432 696 b0c Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-28 14:29:58:432 696 b0c Agent   * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
2014-10-28 14:29:58:432 696 b0c Agent   * Search Scope = {Machine & All Users}
2014-10-28 14:29:58:432 696 b0c Agent   * Caller SID for Applicability: S-1-5-21-600452275-980750782-2124898778-9669
2014-10-28 14:29:58:432 696 b0c SLS Retrieving SLS response from server...
2014-10-28 14:29:58:432 696 b0c SLS Making request with URL
HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
2014-10-28 14:29:59:135 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\sls.cab with dwProvFlags 0x00000080:
2014-10-28 14:29:59:135 696 b0c Misc Microsoft signed: NA
2014-10-28 14:29:59:135 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:29:59:135 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP3958.tmp with dwProvFlags 0x00000080:
2014-10-28 14:29:59:135 696 b0c Misc Microsoft signed: NA
2014-10-28 14:29:59:135 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
2014-10-28 14:29:59:135 696 b0c SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
2014-10-28 14:29:59:135 696 b0c Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
2014-10-28 14:29:59:135 696 b0c Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-28 14:29:59:135 696 b0c Setup Checking for agent SelfUpdate
2014-10-28 14:29:59:135 696 b0c Setup Client version: Core: 7.9.9600.17092 Aux: 7.9.9600.17031
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "https://fe2.update.microsoft.com/v10/3/windowsupdate/selfupdate"
2014-10-28 14:30:00:151 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-10-28 14:30:00:151 696 b0c Misc Microsoft signed: NA
2014-10-28 14:30:00:151 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:30:00:151 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP3D51.tmp with dwProvFlags 0x00000080:
2014-10-28 14:30:00:167 696 b0c Misc Microsoft signed: NA
2014-10-28 14:30:00:167 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:30:00:167 696 b0c Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-10-28 14:30:00:167 696 b0c Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-10-28 14:30:00:167 696 b0c Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-10-28 14:30:00:323 696 b0c PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-10-28 14:30:00:323 696 b0c PT   + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
2014-10-28 14:30:01:104 696 b0c PT WARNING: Cached cookie has expired or new PID is available
2014-10-28 14:30:01:104 696 b0c PT WARNING: PTWarn: Anonymous plug-in skipped for WU
2014-10-28 14:30:01:198 696 b0c Agent Reading cached app categories using lifetime 604800 seconds
2014-10-28 14:30:01:198 696 b0c Agent Read 1 cached app categories
2014-10-28 14:30:40:917 696 b0c PT WARNING: ECP: Failed to validate cab file digest downloaded from
http://download.windowsupdate.com/d/msdownload/update/others/2013/09/9242543_a77d372b9c8b13c599a3daf4b321ea1903da9a72.cab with error 0x80091007
2014-10-28 14:30:40:917 696 b0c PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 57, Old Count = 60
2014-10-28 14:30:41:151 696 b0c PT   + SyncUpdates round trips: 14
2014-10-28 14:30:41:151 696 b0c PT WARNING: Sync of Updates: 0x8024402f
2014-10-28 14:30:41:151 696 b0c PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
2014-10-28 14:30:41:151 696 b0c Agent   * WARNING: Failed to synchronize, error = 0x8024402F
2014-10-28 14:30:41:151 696 b0c Agent   * WARNING: Exit code = 0x8024402F
2014-10-28 14:30:41:151 696 b0c Agent *********
2014-10-28 14:30:41:151 696 b0c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:30:41:151 696 b0c Agent *************
2014-10-28 14:30:41:151 696 b0c Agent WARNING: WU client failed Searching for update with error 0x8024402f
2014-10-28 14:30:41:151 696 b0c IdleTmr WU operation (CSearchCall::Init ID 1, operation # 7) stopped; does use network; is not at background priority
2014-10-28 14:30:41:151 696 b0c IdleTmr Decremented PDC RefCount for Network to 0
2014-10-28 14:30:41:151 696 b0c IdleTmr Decremented idle timer priority operation counter to 1
2014-10-28 14:30:41:151 696 6fc AU >>## RESUMED ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:30:41:151 696 6fc AU   # WARNING: Search callback failed, result = 0x8024402F
2014-10-28 14:30:41:151 696 6fc AU #########
2014-10-28 14:30:41:151 696 6fc AU ## END ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:30:41:151 696 6fc AU #############
2014-10-28 14:30:41:151 696 6fc AU All AU searches complete.
2014-10-28 14:30:41:151 696 6fc AU   # WARNING: Failed to find updates with error code 8024402f
Derek
Systems Engineer
Derek Desktop Engineer

Satellite C660 - Windows Updates keep disabling my wireless.

Similar Messages

Maybe you are looking for