Satellite C660D-10P - USB Connect issue Windows 7 64bit

Hello!
USB drive is no longer recognized shortly after the start.
According to "Unsubscribe" or "Change user" again OK, but even for a short time.
Have no USB Updat found at Toshiba, a controller failure will probably be.
Can anyone help?
Greetings Harald

Hi Harald
Can you please tell us which notebook model do you have?
Do you use original OS version that you got with your notebook?
Maybe I didnt understand your problem description but I presume USB ports are not working on your Satellite notebook? Right? have you tested it with different USB devices?
When you open device manager can you see some unknown devices there or some hardware problems?

Similar Messages

  • MTP USB connection issue - Windows 7 iPhone 4

    I have a new Dell Vostro laptop running Windows 7. When I connect iPhone/iPad to the USB port I get an error that says device MTP USB device was not successfully installed.
    I went to the Device Driver and uninstalled and then searched for new devices...it briefly sees and indentifies the iPhone but then circles back to the same error "MTP USB device was not successfully installed"
    There must be a solution?? I doesn't seem like many others in this forum have this issue?
    Any help is much appreciated.
    Cheers

    Run the registry editor (type in “regedit” in the command-line”)
    Backup your current registry (File -> Export)
    Navigate the following path: HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Control / Class
    On the left side, search for the entry {EEC5AD98-8080-425F-922A-DABF3DE3F69A} and click on it
    On the right side, you will find a key which begins with “Upper…” – delete it!
    Now unplug your iPhone
    Restart your computer
    Plug in your iPhone and hopefully find it mounted as a drive again!
    Hope this helps!

  • Need info about WLAN card on Satellite C660D-10P

    Hello,
    I installed a new operating system (Windows 7) on my device last week, because i wanted to format the HD.
    Now my Laptop is not able to identify the Network card anymore.
    As a consequence, i must install the driver for the Wlan card, but i do not know the name of it.
    So Please, can you give me the name of the Wlan Card (Company and type etc.) ?
    Laptop information:
    Satellite C660D-10P
    Thank you very much in advance
    Greetings from Germany

    According notebook specification your notebook has Realtek 802.11 (b/g/n) 13ch-RTL8188CE card inside.
    WLAN drivers for Win7 you can download from http://aps2.toshiba-tro.de/wlan/
    If you need more help let us know.

  • N97 usb connectivity issues

    Hi,
    I've had my N97 for about a week now and am having some serious USB connectivity issues with the phone in that when I connect to my PC, on the first occasion it will recongnise the USB connection, but if it gets disconnected it subsequently won't reconnect.  This means I am unable to install the latest version of the firmware which appears to address some USB issues.  I've tried both version 1 and the beta 2 Ovi suite.
    Any ideas??
    Thanks,
    Trev

    Hi!
    Me and my friend at work got the same STUPID problem. We unpacked our phones, connected them and upgraded FW and got everything setup (mail, music etc.)
    Now I got back to work and thought that it was no problem plugging in my phone and update it with some new music and contacts...well was I wrong...the stupid 7000 SEK phone won't even take the electricity and charge...I get no connection to the PC...it worked fine 2 days ago...
    So I try to install the stuff on the CD again, no luck....I tell Windows to add new hardware, nowhere on the Internet and nowhere on the CD are there drivers to be found...
    So here I am with a million dollar phone I can't connect to my PC...what the hell is this???
    Looking in this thread and seeing the answers I should not hold my breath waiting for this to be fixed...but my question is: Will I have to wait for a FW update for this phone to connect to my PC?
    Regards
    //toppis

  • USB connectivity issues

    I recently bought a 20GB 4G iPod from a friend, who had bought it originally off of ebay atleast a year ago so all I have is the ipod itself and a usb cable.
    Everything on it works fine, all of the music previously put on works fine, as do pictures, etc. But when I went to go add and delete files off of the ipod I got the "USB Device Not Recognized" balloon popup in XP. After going through these forums and numerous others I haven't been able to accomplish anything. I've tried the 5R's (except for restore as I haven't been able to get the ipod connected in any way to this computer).
    I have another computer downstairs which is a few years older, about 5 years old but which has XP installed aswell, so I figured I might try and see if I could get anything to work on that.I tried to plug the ipod into just to see if something would work, and it showed up in My Computer right away before I had iTunes installed. I did, however get an error about the usb ports not being high speed, I'm assuming they're USB1.1 giving the computer's age, but it worked nevertheless. I got the ipod to charge, it to be accessible from iTunes, and to show up in Windows Explorer without a hitch.
    After having it fully charged I tried once again to hook the ipod up to any usb port with no avail. I checked both computers' properties and found both have 500 mA to each USB port, so I would assume the USB 2.0 ports would have a better chance of working than the 1.1?
    Any help is greatly appreciated, let me know if you need more information, thanks!

    This may sound really strange, but if your computer has a FireWire connection, try using that instead. I recently bought a new computer (HP w/Windows XP) and had all sorts of USB connection issues.
    USB Device Not Recognized
    iPod needs to be restored
    Cannot Read USB Storage Device
    Finally fed up, I tried the FireWire ports on the computer and it worked not problem. iTunes popped right up and started updating.
    HP   Windows XP  
    HP   Windows XP  

  • Help: USB Connection issues

    I have been having USB connection issues for 2 month and can't seem to find a fix. My MP is a 2 x 2.8 Quad-core with 16 GB ram, OS X 10.6.5. When I connect devices (iPhone, iPad, CF card reader) everything connects but when I sync or try downloading photos from my CF reader I get partially through but then I get an error that the device has been ejected.
    I have tried disconnecting my hub and connected directly to the ports but no change. Tried new cords, hubs. If I connect my Canon 7D camera directly to a USB port I can get the images off but that take for ever because of the file size. The only thing that seem to work and not loose my connection is my Epson Pro 3800 printer.
    I'm getting desperate at this point, I have two important photo shoots coming up the first of the year and need to get things working properly. Any help would be much appreciated.

    Here's some tips.
    Apples version.
    DALE

  • USB Connection Issues-New Mac Pro

    I have a new Mac Pro (late 2013) that has USB connection issues.
    First; it often fails to recognize a USB keyboard, or takes more than a minute to do so.  I tried it with two different keyboards, one a regular Apple USB keyboard and the other a Das Keyboard unit.  I tried it both on a powered USB hub and directly connected to the computer.  Neither of these affected the problem.  It happened both under Mountain Lion and Yosemite, and seems to be worse under Yosemite.  This problem DOES NOT occur on my Mac Mini, so the problem appears to be with the Mac Pro.  Most of the time unplugging and plugging the keyboard in again solves the problem.  This gets old.  I have gone to using a bluetooth keyboard but much prefer the USB keyboards with the numeric keyboard.
    It also ejects the only USB drive attached to it.  It does not eject the two Thunderbolt drives.  The disconnection occurs when the Mac Pro is in the "sleep" mode; the "Disk not ejected properly" message is displayed when the computer wakes up.  This happens almost all the time.  The same drive does not exhibit this behavior when attached to the Mac Mini.  It is an older G-Drive unit.
    Possibly related to this is the fact that the two Thunderbolt units (Pegasus R2 and Lacie) do not shut off when the Mac Pro is sleeping.  I wonder if the problem lies in how the unit "sleeps" and "wakes up".  I don't know enough about the internal workings of these things to know how to test for this.
    If anyone knows how to fix this I'd appreciate some advice.

    Have you tried resetting the SMC and PRAM?
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM

  • USB Connections on Windows Vista 32-bits edition

    Hi. Since I installed Windows Vista 32 bits edition (don't ask me why, but when I used the 64 bits edition- which I uninstalled because some games didnt' work well- this didn't happen), I have this trouble.
    I have a N80. When I use the USB Connection in PC Suite Mode, the Nokia PC Suite perfectly detects the phone, and Windows installs the drivers by downloading them from Windows Update, I know this because when the balloon in bottom right corner appears, it says "Installing new hardware software..." and if I click, the little windows apeears, and it says "Downloading from Windows Update".
    The problem comes when it finishes installing it. Windows says that there was an error when installing new devices, the error code is 28, and the legend is:
    The name is already used as a service name or as a display name of some service.
    Or something like that, I have Windows in spanish and I tried to translate it. And the Nokia PC Suite never displays "Nokia N80 connected via USB", always remain as "No connected phones". This doesn't happens if I use the bluetooth mode, but I need the USB because I want to check if firmware updates are avaliable and other things.
    I tried in differents USB ports with the same results.
    Has anybody had a similar experience or any idea? Or maybe is this a known issue? (obviusly known by everybody but me, ...)

    - Ihave the exact same problem as you do and so far have not found a solution to the problem. Everytime I check the post board I see more and more have viewed your post but no one else seems to have an answer for you either. I e-mailed tech support and answer I got was no help what so ever to me. So posting a comment to your question in hopes of getting someone's attention that maybe can help us both. Who knows maybe Creative might even respond to us.

  • Satellite U940 PSU6VA - Wireless connectivity issues

    _*My specifications:*_
    *Model:* Toshiba Ultrabook (Satellite U940 PSU6VA-00S002)
    *Operating System:* Windows 8.1 x64 (upgraded from Windows 8 x64)
    *Wireless adapter:* Intel(R) Centrino(R) Wireless-N 2200
    *Wireless adapter driver version:* 15.10.0.12 (which is the latest for my device)
    I have had this Ultrabook since February 2013, and throughout that period I have always had wireless connectivity issues, even after performing a factory reset. My wireless icon fluctuates between three states:
    * Internet access
    * Limited (in which case I cannot connect to the internet or any device on the network)
    * Not connected - connections are available (and if I try to make it connect to the network, it will fail)
    Sometimes my computer would instantly reach the "Internet access" state upon startup, and would remain in that state. Other times, it would be "Limited" for several minutes after starting up my computer before it finally connected, and even then the connection would drop out every now and then. At the worst, it would remain either "Limited" or "Not connected" indefinitely, no matter how many times I reset my wireless adapter or restarted my computer.
    Until recently, I had always thought that these issues occurred randomly. However, I recently noticed that I always have a perfect connection whenever there are no other computers connected wirelessly to my home router, and I always experience issues of varying degrees when there is at least one other computer (or even a smartphone) connected wirelessly to the router. If there is another computer connected to the router via an Ethernet cable, this does not cause any problems; it is only wireless connections that interfere with my computer.
    It is only this computer that has these problems; the other computers in my house never experience these issues, no matter how many computers are online. Also, my computer does not only experience these issues with my home router; it has the same issues on my university's wireless network.
    My question is, how can I fix this? Is this a known bug, or is my wireless adapter defective? I know I can connect using an Ethernet cable where possible (I never have problems with Ethernet connections), but this is not always possible at university.

    > {quote:title=TomDexter wrote:}{quote}
    > Intel page provides the Wlan driver for this WLan card and its v16.7.0 for Win 8.1
    I just checked the page you linked to, but it recommends that laptop users obtain their drivers from their OEM rather than from Intel.
    I had already checked for driver updates through both Toshiba Service Station and Device Manager (and checked both again just now). Toshiba Service Station tells me that there are no updates available, and Device Manager tells me that "the driver software for your device is up to date".
    Should I update to Intel's latest driver anyway? If so, should I also install the Windows 8.1 version of "Intel PROSet/Wireless Wifi Software"?
    > {quote:title=TomDexter wrote:}{quote}
    > I would recommend you to check the Wlan functionality and performance testing each Wlan standard 802.11 B / G and N and additionally check the different Wlan channels (1-11)
    I have found the WLAN channel setting in Device Manager and I will test it when I get the chance. But how do I change the WLAN standard?
    Message was edited by: Justinian

  • E-72 OVI Suite-USB Connection Issue

    Model: E-72
    OS: 031.023
    OVI Suite Version: 2.2.1.23
    Laptop OS: Windows 7 Enterprise 64 Bit
    Problem: When connecting the phone via USB, OVI Suite suggests that the phone is not in PC Suite mode where as I've selected PC Suite mode when it prompts also by going to
    Ctrl Pnl>Connect>USB. But no luck, restarted Laptop multiple times, also the phone.
    OVI works fine with Blutooth for all sync etc but I need USB connection working to upgrade mobile software.
    Other Observations: When phone is connected via USB Windows 7 detects it as S60 device with options of manage media, browse files, import picture, not sure if this is related. Also the device shows error and requires troubleshooting in modem mode because of bluetooth peripheral device is not installed due to not being able to find appropriate driver.
    This is a new phone and new OS, using for first time with USB cable, it never worked, no changes made that could be trigger for this issue, any help will be greatly appreciated

    Hi gmudgal83
    I am not sure whether this will solve your problrm but you could try this once.
    1. Disconnect your phone from PC if connected.
    2 .Open Control Panel and go to ‘Programs and Features’
    3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
    4. Click on the ‘Change’ button on top toolbar.
    5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
    6. Restart the computer if prompted.
    7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • PRS950 USB Connectivity issues

    Very inconsistent USB connectivity - it connected to the Library software, once, and synced properly from a USB port directly on the computer. The next time, from the same port, it can't be seen in the Library software - at all. Mostly, the reader says it's connected and charging battery - but will not show up in the Library software.
    Now the computer (Windows 7, SP1) wants to reformat the drive before it can be used? I'm tempted!!!
    Help - please...!
    Thanks,

    Are you having the same issue on all USB ports? Try uninstalling and reinstalling the USB Root Hubs in Device Manager. Have you tried connecting the Reader to another computer? It needs to be established whether the issue is related to the computer or the Reader itself. If you have reset the Reader, uninstalled and reinstalled the software but the issue still persists I would recommend that you contact Sony product support for more extensive troubleshooting of the issue:
    http://esupport.sony.com/US/perl/suppor ... mdl=PRS950

  • Nokia N800 - USB Connectivity Issues

    I was just getting ready to purchase about 3000 770's when I found out the N800 was being released. So I bought a few test models. I am having some issues with the new model that I've not heard addressed on any forums yet:
    1. USB connection to the PC is a little bit "picky". After several failed attempts to connect to my Windows XP machine ("Error connecting USB device" ), I finally figured it out: The 800 has to be powered OFF before it's plugged in. This was not the case for the 770.
    2. Despite all attempts, I've failed to connect the N800 to a Mac. This is the first device I've ever had problems getting a Mac to talk to.
    And finally, a complete mystery:
    3. Why, on a device touting its open source qualities, is the software updater written exclusively for dot Net architecture? I wonder if anyone else has found the fact that a Linux-based device can not be updated by a Linux-based computer a bit ironic?Message Edited by sealswcc on 22-Jan-2007
    08:07 PM

    After upgrading from an older version of OS2008 to the latest
    version, I lost the ability to connect my N800 to my Linux
    box as a USB device. Before, it would show up as a USB
    device, and I could access the card. Now it doesn't.
    I have it plugged in when I connect the cable, and when
    I start it, it boots as though the cable is not connected,
    and it does not appear as a device. This is rather odd!
    Has anybody else experienced this?

  • Volvo XC60 - iPod USB Connection Issues

    I am having issues with my Volvo XC60 recognizing my iPods via the car's USB connection.  Is this a widely known issue?  Does anyone know if there is a fix in place for this issue?

    I've had a very similar problem with all my iPods. First I had a shuffle, and it rebooted windows a few times... Then I returned that and bought a Nano. A month later that was stolen, but it DID restart my computer a few times again. Now I have a 60gb video iPod, and my computer sees the iPod, but the updater and iTunes do NOT.
    In regards to your specific problem... I think it's because a Windows dll file is corrupted, missing, or damaged... I can't guarantee that this will work no matter what, but at least my computer hasn't crashed yet since I got my video iPod, and I've run this program.
    First, make sure you have all the latest updates from windows update. Then, go to this site, and click on the donload link for tuneXP 1.5.
    http://www.driverheaven.net/dforce/showdoc.php?doc=txp_download
    Download it, and install the program (it's totally free!) After you install it, start up the program, and click on the Miscellaneous menu, and then click on system file checker. (NOTE: You WILL NEED your origianl windows CD for this to finish properly.) While doing the system file check if it ever says that it can't find a file or can't read the disc, ALWAYS tell it to RETRY... Eventually it'll find the proper file on the windows disc.
    After it finishes (can take anywhere from 20 min to a couple hours depending on how fast your pc is) restart your pc, and then try using your ipod again.
    This has caused my computer to not crash anymore when having my ipod plugged in, but now I can't see my ipod in itunes, or the ipod updater.
    I can still put music only on my ipod though using the vpod program which is completely free and easy to use. I have to be able to use itunes to be able to put videos, album art, and pictures on my ipod, but at least I have music on it.
    Let me know if this helps, and if you want to know where to get vpod.
    PC   Windows XP Pro   1gb ram, 500gb hd, dvd+DL burner

  • Re: Satellite C660D-102 - How to copy Windows on DVD?

    Hello people. I have bought a new Toshiba Satellite C660D-102.
    The seller told me to copy Windows on DVDs soon to open the laptop. Do not know where to take the Windows installation files. You've encountered this problem? How can I fix this problem.

    Hey,
    I think the seller did mean creating the Toshiba recovery disk that contains an image of factory settings. In case you cant start Windows anymore or the HDD must be replaced you can use this disk to restore Windows with all drivers and tools. With other words you get factory settings back, the same settings as you purchased the notebook so its very useful and easy.
    You can create this disk if you start Toshiba recovery media creator that is preinstalled on your computer. Depending on the installation you need some blank DVD mediums. I would recommend high quality mediums, Typ: DVD-R from Verbatim or TDK. They work good and other users here can recommend them too.
    Last but not least you should also read your user manual. It contains interesting information about this and other interesting things. Its also preinstalled on your notebook. :)
    But its really great the seller gave you a hint about this. If you check other forum threads you will read about lot of other users they forget to create this disk and are not able to restore factory settings if Windows failed to start.

  • USB Connection Issues

    Have the 8330 Curve and the Blackberry Desktop application.  It has allowed me to install apps such as opera mini, a stock portfilio app, and can import my calendar items.  I now see 'connecting' in the lower right corner.  Do not see anything on the desktop app that I see as abberant.  What would I need to check on the device to troubleshoot?

    Hi PhilPense,
    To troubleshoot any connectivity issues with the BlackBerry® Desktop Software, please have a look at the following KB article. Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry smartphone. www.blackberry.com/btsc/KB00125
    Hope this is helpful.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for