Satellite C660d-A2k - How to increase display backlight using battery mode

I bought a new laptop, installed all the drivers and it works.
How to turn on the backlight?
It only works when I charge the laptop. turn off when it goes off.
If add the screen brightness to maximum and turn charging the screen becomes even brighter.
How to make led lights fixed, I have it switched on only when charging.

Hi
The display brightness can be changed using the key combination FN + F6 (increase) and FN + F7 (decrease).
Did you read the user manual? This is mentioned in the manual preinstalled on the notebook.
Furthermore you should also check the Win 7 Power Options.
You can find this in control panel -> power options.
I assume the notebook switches to another battery optimized power plant while you disconnect the AC adaptor. In such case the display brightness goes down to ensure longer battery working time. You can change the brightness level for this power plant too.

Similar Messages

  • How to increase display time of Toast notifications in Windows 10?

    Hi,
    I want to know how to increase display time for Windows toast notification in Windows 10.

    On Thu, 2 Apr 2015 09:08:12 +0000, david hk129 wrote:
    Start > left side, Settings > Ease of Access > left side, Other options > at Show notification for, change the time .
    If the OP is asking about the notifications generated by the new
    Notifications Center feature then the above won't do any good. The above
    setting only impacts the old style notifications generated by applications
    that have icons in the system tray area of the task bar.
    Paul Adare - FIM CM MVP
    "The most amazing achievement of the computer software industry is its
    continuing cancellation of the steady and staggering gains made by the
    computer hardware industry." -- Henry Petroski

  • How to disable 'display pdf (using Acrobat Pro X) in browser'?  Note:  The option is unavailable to un-check box.

    How to disable 'display pdf (using Acrobat Pro X) in browser'?  Note:  The option is unavailable to un-check box.

    Hi URT301,
    Please see this document: PDF Ownership when Reader X is Installed with Acrobat. You'll find several solutions to this problem in the FAQ section.
    Please let us know how it goes.
    Best,
    Sara

  • Satellite A85-s107 - blank screen on boot up using battery power

    Satellite A85-s107 blank screen on boot up using battery power
    When I boot up A85-s107 in battery power, it is getting booted up in the background, but my screen is blank.
    After that if I connect it to AC power and switch off/on the laptop power button, the display comes back to life.
    There is no problem when I boot up when connected to AC power.
    Battery is fully charged and computer will run off battery if I remove AC after boootup
    Any suggestions?
    Ps:
    also notice that when I remove AC and then reconnect I have to start the computer twice as it doesnt boot the 1st time?

    hi nick34_99,
    sounds to me like a bad charging electronic...
    i got this issue on my sat3000 too, but only when battery is not fully charged...
    start the unit with a dos-disc (freedos has an cd image) and let the battery run "dry"...
    after that boot without battery (ac-adapter connected of course) and log on.
    after that shut down insert battery and try with batt only....
    this trick has done magic on my machine...

  • Re: Satellite C660D-102 - How to copy Windows on DVD?

    Hello people. I have bought a new Toshiba Satellite C660D-102.
    The seller told me to copy Windows on DVDs soon to open the laptop. Do not know where to take the Windows installation files. You've encountered this problem? How can I fix this problem.

    Hey,
    I think the seller did mean creating the Toshiba recovery disk that contains an image of factory settings. In case you cant start Windows anymore or the HDD must be replaced you can use this disk to restore Windows with all drivers and tools. With other words you get factory settings back, the same settings as you purchased the notebook so its very useful and easy.
    You can create this disk if you start Toshiba recovery media creator that is preinstalled on your computer. Depending on the installation you need some blank DVD mediums. I would recommend high quality mediums, Typ: DVD-R from Verbatim or TDK. They work good and other users here can recommend them too.
    Last but not least you should also read your user manual. It contains interesting information about this and other interesting things. Its also preinstalled on your notebook. :)
    But its really great the seller gave you a hint about this. If you check other forum threads you will read about lot of other users they forget to create this disk and are not able to restore factory settings if Windows failed to start.

  • How can I display and use the full RAW file?

    Hi,
    my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very helpful because you can see the target format already on the camera screen (with black bars on top and bottom), which helps the composition. However, when processing the photos on the big screen afterwards, it often also helps the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
    The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
    Searching a little bit on the web I found many other photographes having the exactly same problem with many different cameras. However none of them reported to have a solution for this. Still I am pretty sure that there must be a solution, since otherwise this would be a really heavy bug within Lightroom and I cannot imagine that Adobe would leave this matter unsolved.
    So I would really appreciate if someone could help me with this.
    Many Thanks
    Martin

    Hi Jao, Victoria, Lee Jay,
    Thanks for clearification. Do you have additional information about when this fix will be available and whether at least some popular old cameras will be supported?
    What I do not get is why Adobe would need to redo all existing cameras. I think this is a more general issue, where Lightroom misinterpretes the exif data which includes both the exif image height/width as well as the cropped image height/width. Intepreting this information correctly, any software should be able to display both - the full image and the cropped area (as shown by many cheap or free software tools). In the internet I found another workaround for the issue in Lightroom, which is undermining this point: When setting the cropped image height/width to the numbers of exif image height/width manually (e.g. with exif tools), Lightroom actually is able to display the full 4:3 picture.
    So this bug should be easily fixed for all cameras and I have no clue why Adobe still has no fixed it with Lightroom already available in version 4.2.
    Cheers
    Martin

  • How To Increase Display Resolution on RD650

    How do I increase the display resolution of the console via the Java viewer or ThinkServer System Manager software?  It's currently limited to a max res of 1024x768. This is a Hyper-V server and I need a better resolution on the host for managing VM's.

    If you are mirroring the displays they will have the same resolution, if you are extending the displays you can have different resolutions for each display.

  • How to increase display field size of parameter in Oracle BI P11.1.1.6.5

    Hi,
    Can somebody help me on this issue?
    On my report, I have to display labels with a length of 35 or more character for parameters. ex."Please Enter the Payment Date(MM/DD/YYYY)*". But When I try to run the report in BI Publisher, I am seeing the display label only as 'Please Enter the Paymen... '. How can I increase the display label width for parameters?
    I am using Oracle BI Publisher 11.1.1.6.5 .
    Thanks,
    Shaji
    Edited by: user_0001 on May 3, 2013 8:25 AM
    Edited by: user_0001 on May 3, 2013 8:26 AM

    Thanks Srini and RM for replying it. I already have those created for my report. I have this 'Please enter the Payment Date(MM/DD/YYYY)*' for a label with text size 100, but when I am trying to open the report, why I am seeing only this much 'Please Enter the Paymen...'. I am missing 't Date(MM/DD/YYYY)*' in the display of parameter label.
    Thanks,
    Shaji

  • How to increase displayed rows when clicking RESULT tab

    Hi Experts,
    How do I increase the number of rows displayed in an Analysis report when you hit the RESULT tab?
    Right now, the default rows displayed in my current development is 'Rows 1 - 25'
    I want a bigger number. :)
    Thanks,

    Hi,
    try to use <MaxVisibleRows>500</MaxVisibleRows> this will apply entire application, if you just want to set particular report edit analysis--> table/pivot view properties and increase the no of rows display.
    Refer section
    18.3.1.2 Manually Configuring Settings for Data in Views
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/answersconfigset.htm#r9c1-t2
    Thanks
    Deva

  • Satellite L10-209 - How to install display driver for Windows 7?

    I've formatted my *Satellite L10-209* and installed *Windows 7*. All drivers installed well but the *VideoCard* :xD
    How do I install the Display Driver (Video Card)?
    Tools & Utilities CD doesn't work with Win7,,

    Hi
    Im wondering that you installed Windows 7 on this oldie. In my opinion Windows XP would be the better choice but ok, you can do what you want ;)
    Anyway, as far as I know your notebook is equipped with an Intel graphic card so I would recommend downloading the driver form Intel directly because the Toshiba website shows only Windows XP display drivers.
    http://www.intel.com
    Check this!!!

  • Satellite A500-17X: How to get new backlight keyboard to work?

    Hi there
    I recently had to replace the keyboard on my A500-17X (PSAR3E-00N005EN) and I decided to replace it with the backlit model of the same keyboard. The original keyboard wasn't backlit but I thought i'd give it a go anyway as it was the same price.
    I installed it into my laptop and everything is working fine apart from the backlight function.
    There was even a port for the power ribbon to go into so it is definately installed properly. I read on other forums that it is sometimes an issue with the BIOS or HWsetup but my BIOS doesn't give me the option for it and neither does HWsetup.
    I was just wondering whether there is a way of getting the backlight to work on the keyboard.
    Perhaps a different driver or changing the BIOS/HWsetup somehow?
    Would appreciate any answers!
    Regards
    James

    I believe there is no way to activate the backlight through drivers or BIOS settings. You may need to send the notebook to a Toshiba Repair center to get it activated.

  • How can I display Excel using Word VSTO Addin.

    Hi all.
    I am a beginner.
    And studying Word VSTO ribbon addins.
    I wrote very simple one (works charm );   
    Microsoft.Office.Interop.Word.Application  oAPP  =  Globals.ThisAddIn.Application;
    oAPP.Selection.InsertAfter( " Hello, Word !! " );        
    oAPP.Selection.Collapse();
    Now, I have to go on.
    I want to display "Hello, Excel !! " from the same addin (from the Word Addin)
    I tried to port the following VBA codes (into Word Addin);
        Set oEXCEL = CreateObject("Excel.Application")
        Set oWBOOK = oEXCEL.Workbooks.Add
        oWBOOK.ActiveSheet.Range("A1").Value = " Hello, Excel !! "
        oEXCEL.Visible = True
    I do not know how to start from the very beginning.
    I can not make "Application (for excel)" object at all.
    VS says, the "Application" is not for the Excel but for the Word.
    Yes, everybody know it. But, Excel has the same one too. So I tried to make casting. It never works.
    I added required reference(s).
    Wht do I have to do ?
    Is it impossible, naturally ?
    Regards

    Hello,
    The
    How to automate Microsoft Excel from Microsoft Visual C#.NET  article describes all the required steps for automating Excel from any other application.
    Anyway, the current forum is for VSTO specific questions. I'd suggest asking Excel or Word specific questions on the
    Excel for Developers or
    Word for Developers forums instead.

  • How to Increase Retrival time using excel addin

    I have a ASO cube what thing can i do ti increase retrival time to excel addin on version 9.3.1
    Please advise

    1. Edit the essbase.cfg file with the following:
    AGENTDELAY 60
    NETDELAY 600
    NETRETRYCOUNT 800
    NETTCPCONNECTRETRYCOUNT 100
    AGENTTHREADS 60
    SERVERTHREADS 60
    AGTSVRCONNECTIONS 7
    2. Edit the database properties with the following:
    If on 32-bit Platform, set the Essbase Data retrieval buffers as:
    Buffer size(KB): 10
    Sort buffer size(KB): 40
    If on 64-bit Platform, set the Essbase Data retrieval buffers as:
    Buffer size(KB): 20
    Sort buffer size(KB): 40
    3. Add or Edit the following Registry settings on Essbase Server and Client machines
    a) Open the Registry
    b) Navigate to LocalMachine\System\CurrentControlSet\Services\TCPIP\Parameters
    c) Add new DWORD Value named TcpTimedWaitDelay, right click and select Modify. Select decimal radio button, type in 30. (The default value of this parameter is 2 minutes. This is how long twill take for a TCP/IP port that was used by the network for a connection to be released and made available again. 30 sec is the minimum allowed by Microsoft)
    d) Add new DWORD Value named MaxUserPort, right click and select Modify. Select decimal radio button, type in 65534. ( The default value is 5000. This determines the highest port number TCP can assign when an application requests an available user port from the system.
    e) Add new DWORD Value named MaxFreeTcbs, right click and selectModify. Select decimal radio button, type in 6250. (The default value is 2000. This determines the number of TCP control blocks(TCBs) the system creates to support active connections. Because each connection requires a control block, this value determines how many active connections TCP can support simultaneously. If all control blocks are used and more connection requests arrive,TCP can prematurely release connections in the TIME_WAIT state inorder to free a control block for a new connection and also increase the netdelay and netretrycount.
    If the application is crashing on retrieval, then you might be hitting a unpublished Bug 12319088: ON RETRIEVAL FROM EXCEL ADDIN FOR THREE TIMES, ESSBASE APPLICATION SHUTS DOWN
    KosuruS

  • How to get display name using PL/SQL

    Hello i whish to know if any one know how get the url and the display name of a page group, i ask this because i what to make a dinamic menu usgin dinamic pages.
    If any one know please let me know
    Best Regards
    Jose.

    Jose -
    Use the view WWSBR_ALL_CONTENT_AREAS.
    The Content views are documented here: http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1012/wwsbr_api_view.html
    Regards,
    Candace

  • How to switch display to use only AMD graphic card on Lenovo G470

    Hi, seems like there are 2 graphic cards on my Lenovo G470, 1 internal & 1 AMD HD6370. Does anyone knows how to change the option so the laptop always use only AMD graphic card?
    Thanks!

    hi childs,
    is there any graphic card switch button? also, have you tried to disable/activate the graphic card in bios?

Maybe you are looking for