Satellite C670D-11G - unable to disable screensaver

I've bought a Toshiba c670d-11g and I'm unable to disable the "screensaver" function.
Every 3 minutes my screen fills up with waves & fractals if I don't touch any key.
How can I disable this extremely annoying fuction?
Best Regards
Lizzy

Start > Control panel > Display > Personalization (bottom left corner) > Screen saver (bottom right corner) > set screen saver to NONE
Or
Right mouse click on the desktop > Personalize (last option) > Screen saver (bottom right corner) > set screen saver to NONE

Similar Messages

Satellite C670D-11G - from 4GB memory it is only 2.62GB used

Hello
I'm 32-bit and 64-bit that I used 3.12.
The bios is up to date 1.70
You can help me

Hi
The unit was equipped with an AMD Radeon HD 6310 Graphics and this GPU shares up to 1.974 MB from main memory (in case of 4 GB RAM). In case of 8GB RAM the shared memory would increase up to 3.443 MB
Therefore the 2.62GB main memory are in use.

Satellite C870-11G - "SM BUS controller driver missing" for Win 7 64bit

Good afternoon,
After extensive searching of the forums I have been unable to find a solution so far.
A few of months ago, following the demise of her previous Satellite, my lady friend acquired a Satellite C870-11G running Windows 7 (64 bit).
She acquire the machine online from PC World and after doing the windows updates set it up using the Zonealarm free firewall & AVG 2013 free antivirus. We installed the bundled Microsoft Office 365 and drivers for her HP F4180 Deskjet.
Initially everything ran fine but about a month ago the machine would not recognise the printer.
After doing the troubleshooting thing, the machine reported an "SM BUS Controller Driver" as being missing.
After a lot of net research etc, plus faffing around with the System Restore" function, I still couldn't fix it and so went for the 'nuclear option' i.e. I backed all her data up and did a full Factory Reset from the restore partition.
We've gradually been putting it back together, reloading her data, re-installing ZoneAlarm & AVG, Picassa & Office 365. Yesterday I went to re-install the printer drivers but before doing so checked the Device Manager only to find that the error "SM BUS controller driver is missing" had returned. Grrrrr...
I've been trying to use the system restore to go back restore point by restore point but that too now fails to complete every time with the error (0x80070005).
Before I go Nuclear again, has anyone any ideas please...?
Regards & thanks in advance.
Larry

Try please to reinstall chipset driver. I found it for your machine and you can download it from here .
Test it please and post some feedback.

Windows XP installation on Satellite L300 11G

Hello,
I have a problem installing windows XP on my Toshiba Satellite L300 11G.
It does not recognize the SATA HDD. SO I downloaded the files that were needed (Intel Storage....) and then I get an error: iaStor is corrupted. I am pretty new in computing so I do not know if I downloaded the right thing. Please if someone could guide me trough and give me a link to download the correct file.
And does that message come only if I fail in choosing the correct driver when asked?? Or is there something else I am doing wrong...??
Please help. I am trying to fix this for several days, and I bought my laptop a few days ago and I need it for business. I would appreciate your help a lot.
Thanks.

Come on buddy... Please dont mix everything!!!
*_Regarding the Toshiba Vista Recovery CD:_*
If you want to create the Toshiba Vista Recovery DVD and want to burn the preinstalled Toshiba image on a DVD then use the Recovery Disc Creator tool.
And YES, the user manual contains the info how to do this because Ive checked it and found the needed info!!!
*_Regarding the new XP installation_*
If you want to install the XP OS on this notebook, then you have to include the SATA driver like described by Gipsyman above!!!
The XP OS installation will format the HDD or partition and will erase the installed operating system.
Therefore it would be advisable and recommended to create the Toshiba recovery DVD firstly before installing the XP.
I think this should be clear.

HT5622 I have followed the instructions to reset my password but i am still unable to disable my iPad. How do I disable my iPad?

I have followed the instructions to reset my password but i am still unable to disable my iPad. How do i get my iPad to stop the disable and turn it on?

Might you have a newly acquired iPad that is still locked to someone else's Apple ID? If that is the case, then you will need the former owner's Apple ID and password to proceed. That feature is called Activation Lock and described here:
http://support.apple.com/kb/PH13695
If you cannot get that former owner's Apple ID and password, you will never be able to use the iPad.

On my ipad mini, I am unable to disable safe search?

On my ipad mini and ipad2 I am unable to disable safeY search. Because of this I cannot send email on Yahoo mail

If you mean. Settings> General>Restrictions>Allowed Content>Websites, then disable the restrictions and you should be able to do what you want to do.

IOS 7.0.4 Messages not working, unable to disable iMessage

After upgrading to IOS 7.0.4, I am unable to send Messages from my iPad2. I have the same issue on my iPhone 5s but I was able to disable iMessages in Settings and it works in SMS mode. I tried to disable iMessage in Settings on my iPad 2 but each time I do it then prompts me for my Apple ID password everytime I launch Messages. When I enter my password it accepts it but it enables iMessage, which will not send a text, I get the "not delivered". Since I'm unable to disable iMessage as described above, I'm completely unable to send any text messages from my iPad. Luckily I do not get the same results on my 5s, it allows me to disable iMessage and does NOT prompt me for my Apple ID/password and therefore does NOT reenable iMessage.
I've tried closing Messages and power cycling my iPad2 but the same issue occurs.
Both devices are runing IOS 7.0.4.

Thanks for the replies from all. The first issue was that I don't have a cellular iPad (I forget) so of course I could not turn off iMessage as I did on my 5s.
The real issue was that when my Wife's 5s was upgraded from IOS 7.0.3 iMessage was disabled. This did not happen on my 5s or my Daughter's 5s so I didn't expect it.
So, check to make sure that iMessage is enabled after upgrading from 7.0.3 to 7.0.4.
Thanks again!

THIS IS SECOND TIME I AM EXPERIENCING THE PROBLEM, AND I HAVE ALREADY PAID ANOTHER MONTH PAYMENT BECAUSE I WAS UNABLE TO DISABLE MY MONTH-MONTH MEMBERSHIP ACCOUNT WHICH I BELIEVE IS NOT PROFESSIONAL.. I AM UNABLE TO DISCONTINUE MY MONTH-MONTH MEMBERSHIP A

THIS IS SECOND TIME I AM EXPERIENCING THE PROBLEM, AND I HAVE ALREADY PAID ANOTHER MONTH PAYMENT BECAUSE I WAS UNABLE TO DISABLE MY MONTH-MONTH MEMBERSHIP ACCOUNT WHICH I BELIEVE IS NOT PROFESSIONAL..
I AM UNABLE TO DISCONTINUE MY MONTH-MONTH MEMBERSHIP ACCOUNT, AND IT TRANSACTION IS AUTOMATICALLY MADE FROM MY CARD WHICH I DONT AGREE TO.

When you log into your account page:
Adobe ID
You should see a Mange Plan link. Click it and then click Cancel plan.
This is a user to user forum, none of us work for Adobe.

Interactive report - unable to disable save report option

Hi,
I am using an interactive report and unable to disable "Save Report" option... Although the option is unchecked under "Include in Actions Menu" section... Others' are working fine, I just can't disable "Save Report" option...
Thanks in advance...

When you are logged in as both a Developer and End User, you will ALWAYS see the Save button, even if it is disabled. This is so that you can save the Defaults for an IR. Thus, if you click on the save option, you should only see one item - Save Report Defaults. You will not be able to save a custom report.
Your end-users are not logged in as developers, and thus, won't see any save icon at all. In fact - if you log out of APEX and run just your application, neither will you.
Thanks,
- Scott -
http://spendolini.blogspot.com
http://www.sumneva.com

Unable to disable root after solving login issues

Having followed the steps to regain access to my macbook pro after upgrading to OS X 10.5, I am now unable to disable root as an account or remove the "Other" account from my login in screen.
I have tried using Directory Utility, but this doesn't show root as enabled. However, when I click on enable root, nothing happens so I cannot even enable and then disable.
I can still login as "root" and I am concerned with leaving this active.
Can anyone suggest a method of disabling the root account?

In case anyone else is having this issue, I've found a fix that's worked for my configuration.
In my usual account, which is also and administrators account, I opened Terminal from Utilities and typed:
dsenableroot
at the the prompt. I was then asked for my account password
I was then asked for a root password - I entered the root password I created when I reset the password from the installer password reset utility, and then confirmed the same password.
I then entered the disable command:
dsenableroot -d
followed by my usual account password.
After shutting down and rebooting, I only had my usual account login left and the mysterious "Other" had disappeared and root was disabled.

HP Pavilion g6 Notebook unable to disable Touchpad or access Synaptic to configure it

Recently, I have been unable to disable my Synaptic Touchpad on my HP Pavilion g6 Notebook and, me being a gamer, it is quite annoying fore I always end up moving the Touchpad with my wrist which will, in turn, move my Cursor.
I have done research on this problem and all the answers I have found, I tried and they proceeded to fail. I am quite infuriated and do wish someone knew what was going on and will help me.

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties with the Touchpad of your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please re-install the touchpad drivers from HP Website in order to resolve the issue
Click on the below shown link to find the steps involved in disabling the Touchpad
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03922412
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Mountain Lion : Cannot disable Screensaver

I am not able to disable screensaver on my MBP running Mountain Lion. Even if i set start after to "never" or any particular time interval, it always defaults to "10 mins" once i log-off and log back in. Appreciate any help.
/Gino.

You could try deleting the com.apple.screensaver.plist file from your preferences folder, although I'm not seeing anything in that file on my system for the start interval, so that's probably not the right solution.

Unable to disable Cover Page printing on automatic billing jobs

Unable to disable Cover Page printing on automatic billing jobs

Hi
Goto VV32 for your billing output type. Double click on your condition record for this output type. On next screen we can find "SAP cover page", select 'Do not print' here.
try and revert

HT1212 unable to disable ipod, tried to restore several times with no luck

unable to disable ipod after entering incorrect passcode multiple times (says try again in 22,000,000 min). have tried to restore on itunes several time with no luck.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Also try
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Re: ACHI Driver for Satellite C670D-101

Any help for please : ACHI Driver for Satellite C670D-101
Frank

> {quote:title=frakri wrote:}{quote}
> Typ : AMD processor med dubbla krnor E-350 APU med AMD Radeon HD 6310-grafik
> minne : upp till 2 998 MB delat minne med installerat systemminne p 6 GB samt upp till 3 443 MB med systemminne p 8 GB (med frinstallerat 64-bitars operativsystem)
> minnestyp : delad
This is the processor and graphic card models.
I coudn't find much, but it seems it's an amd chipset.
You can try [this|http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=3253751& rpn=PSC4AU&modelFilter=C675D-S7101&selCategory=2756709&selFamily=1073768663] driver.
Go to page 3 and download 'AMD xHC driver'.
If this doesn't work i have no idea. There are no such drivers for this model in the Toshiba Europe site.

Satellite C670D-11G - unable to disable screensaver

Similar Messages

Maybe you are looking for