Satellite C70D-B-105 microphone missing after windows update

Satellite C70D-B-105
Artikelnummer : PSCLCE-004007DU
PLEASE anyone... correct link for drivers for microphone input ?

Missing microphone?
Does it mean that microphone is not listed in sound properties > Recording device?

Similar Messages

Coprocessor drivers missing after window 8.1 installed

coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.

morris2672 wrote:
coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.
What program are you talking about? Coprocessor is built into the Processor nowdays...
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Wont boot after windows update

M y Sateite A305 s6916 wont boot after windows updates tried to install.

Satellite A305-S6916
tried .. every option on F8
Try this. Download a repair disc from here.
   Windows Vista Recovery Environment ISO X64 version (64 bit)
If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
   Startup Repair: frequently asked questions
Also try a System Restore.
   What are the system recovery options in Windows Vista?
-Jerry

Dell Latitude E6520 fails to boot after Windows Updates

Hello,
I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
a recovery disk and run:
dism /image:D:\ /cleanup-image /revertpendingactions
This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending:
kb2982378
kb2978742
kb2977629
kb2976897
kb2973112
kb2972211
There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
2014-09-18 10:52:04:214
496 540
AU Install complete for all calls, reboot needed
2014-09-18 10:52:04:216
496 540
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:623
496 8a4
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-09-18 10:52:04:623
496 8a4
AU Triggering Offline detection (non-interactive)
2014-09-18 10:52:04:623
496 8a4
AU AU setting pending client directive to 'Reboot Pending'
2014-09-18 10:52:04:623
496 8a4
AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
2014-09-18 10:52:04:625
496 8a4
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:625
496 1668
AU #############
2014-09-18 10:52:04:625
496 1668
AU ## START ## AU: Search for updates
2014-09-18 10:52:04:625
496 1668
AU #########
2014-09-18 10:52:04:626
496 1668
AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
2014-09-18 10:52:04:626
496 166c
Agent *************
2014-09-18 10:52:04:626
496 166c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:04:626
496 166c
Agent *********
2014-09-18 10:52:04:626
496 166c
Agent * Online = No; Ignore download priority = No
2014-09-18 10:52:04:626
496 166c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-09-18 10:52:04:626
496 166c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-09-18 10:52:04:626
496 166c
Agent * Search Scope = {Machine}
2014-09-18 10:52:05:210
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:07:170
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:475
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:569
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:11:590
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:14:999
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:16:887
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:18:753
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:19:623
496 1668
Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
2014-09-18 10:52:20:673
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:573
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:773
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:464
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:651
496 1668
AU AU received handle event
2014-09-18 10:52:26:366
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:27:520
496 1668
Shutdwn user declined update at shutdown
2014-09-18 10:52:27:520
496 1668
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:27:520
496 1668
AU AU initiates service shutdown
2014-09-18 10:52:27:520
496 1668
AU ########### AU: Uninitializing Automatic Updates ###########
2014-09-18 10:52:28:206
496 166c
Agent * WARNING: Exit code = 0x8024000B
2014-09-18 10:52:28:206
496 166c
Agent *********
2014-09-18 10:52:28:206
496 166c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:28:206
496 166c
Agent *************
2014-09-18 10:52:28:206
496 166c
Agent WARNING: WU client failed Searching for update with error 0x8024000b
2014-09-18 10:52:28:253
496 1668
Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
2014-09-18 10:52:04:216-0600 1
193 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems
(KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
(KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
for Windows 7 for x64-based Systems (KB2978742)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:425
496 1668
Service *********
2014-09-18 10:52:28:425
496 1668
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-09-18 10:52:28:425
496 1668
Service *************
Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.

Hi ChristianBoman,
We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
http://windows.microsoft.com/en-us/onedrive/share-file-folder
for the update error 0x8024000b, please refer to the following article.
http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
Please take the following steps:
1. Run the Windows Update Troubleshooter.
2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
3. Copy the following text, and then paste it into the Run text box:
Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
4. Click OK.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

SP 2010 - Getting "An unexpected error has occurred. " message when accessing Sharepoint site after windows update - Windows 7 Home Premium

Hi,
I am new to SP 2010. I have installed Share point 2010 server (trial version) on my Windows 7 Home Premium Laptop by following the below link.
http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
Everything went fine and was able to see the new sharepoint site after completing configuration wizard. SP2010 Central Admin also worked fine.
However, after windows update, sharepoint site is not working. I was able to see the site working for more than a day before windows update. SP2010 Central Admin is still working. Executed "PSCONFIG" after
update but still no good.
I saw a warning "The Security Token Service is not available" in Central Admin and did some research to fix the issue but nothing worked.
Hotfix
I believe I have all hotfixes mentioned in the forums. Here is the list.
Windows6.1-KB976462-v2-x64
Windows6.1-KB982307-x64
Synchronization
Windows6.1-KB974405-x64
MSChart
SQLSERVER2008_ASADOMD10
381569_intl_x64_zip
Windows6.1-KB976462-v2-x64
Event Viewer
I can see following log in Event Viewer when accessing site home page.
Event ID: 8306
Task Category: Claims Authentication
Level: Error
Website response
http://localhost:32843/ - "HTTP Error 503. The service is unavailable."
http://localhost:32843/Topology/Topology.svc - Works fine
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc - Returns following error. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security) and IIS website (SharePoint Web Services
-> IIS -> Authentication).
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
I even tried to uninstall Sharepoint and re-install the same. It worked even second time until it went thro' windows update. App pools are running and Websites are up and running in IIS.
Can anyone please help me to fix this issue?
Thanks

Hi Henrik,
Here is the log info.
<EventID>8306</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>47</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<Execution ProcessID="8436" ThreadID="8812" />
<Channel>Application</Channel>
<Security UserID="S-1-5-20" />
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal
Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px
4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;f'.
I would like to let you know that I am getting following message when accessing the below link. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security)
and IIS website (SharePoint Web Services -> IIS -> Authentication).
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
Regards

Windows Update Error 800B0109 after Windows Update Agent 7.6.7600.320 Installed

Hi, I have this error message when running windows update, it happened after Windows Update Agent 7.6.7600.320 installed.
Any idea how to resolve this?
Thank you.

Hi，
Please make sure that your antivirus application does not scan the files in the
%windir% \SoftwareDistribution directory on any computer on which Windows Update Agent is installed.
You can also temporarily turn off the antivirus application and check the result.
Or run the following commands, and press Enter after each command:
Net stop wuauserv
cd %systemroot%
Ren SoftwareDistribution SoftwareDistribution.old
Net start wuauserv
Try to install updates again.
Yolanda Zhu
TechNet Community Support
I tried the commands as well, still prompting the same error.
Thanks

Profiles being reset after windows updates?

Hi All
I'm having issues with Outlook 2013 SP1 resetting our users profiles after Windows Updates have been applied. Their profiles are being reset whilst their previous profiles are being renamed to "BACKUP of <profile name>".
Office 2013 x86 has been deployed via VL Media onto Win7 x64 machines and we are distributing the ImportPRF registry key via GPO (set to Update) in order to customise the profiles on first run. (basic email account and attaching a default PST file)
It appears that after windows updates are applied outlook is triggering the first run process again and therefore resetting the users profiles back to the standard set in our PRF.
We used this method to configure Outlook 2010 and for the years of deploying Office 2010 we never had any issues. Can anyone suggest what might be going on here or what might have changed in Office 2013?
Thanks

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Firefox won't start after windows update

After windows Updated my computer Firefox won't start. I tried a clean reinstall two times, won't work. When I tried to start the firefox the first time after booting my computer it comes with the following message.
XML Parsing Error: undefined entity
Location: chrome://mozapps/content/extensions/update.xul
Line Number 14, Column 1:
<wizard id="updateWizard"
^
Any Help would be greatly appreciated. I like firefox and I'm using it the last 7 Years.
Thanks
DK

I cheated a little bit and put the issue url in a working version of firefox:
chrome://mozapps/content/extensions/update.xul
What I got was a page that looked like this below and console:
blah blah parser:
<pre><nowiki> xml-stylesheet
xml-stylesheet
<wizard id="updateWizard" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul" title="Firefox Update" windowtype="Addons:Compatibility" branded="true" onload="gUpdateWizard.init();" onwizardfinish="gUpdateWizard.onWizardFinish();" onwizardcancel="return gUpdateWizard.onWizardCancel();" onclose="return gUpdateWizard.onWizardClose(event);" buttons="accept,cancel" pagestep="1" currentpageid="dummy" firstpage="true" lastpage="true">
<script type="application/javascript" src="chrome://mozapps/content/extensions/update.js"></script>
<stringbundleset id="updateSet">
<stringbundle id="brandStrings" src="chrome://branding/locale/brand.properties"></stringbundle>
<stringbundle id="updateStrings" src="chrome://mozapps/locale/extensions/update.properties"></stringbundle>
</stringbundleset>
<wizardpage id="dummy" pageid="dummy"></wizardpage>
<wizardpage id="offline" pageid="offline" next="versioninfo" label="Firefox is working offline" onpageadvanced="return gOfflinePage.onPageAdvanced();">
<description></description>
<checkbox id="toggleOffline" checked="true" label="Go online now." accesskey="G" oncommand="gOfflinePage.toggleOffline();"></checkbox>
</wizardpage>
<wizardpage id="versioninfo" pageid="versioninfo" next="mismatch" label="Checking Compatibility of Add-ons" onpageshow="gVersionInfoPage.onPageShow();">
<label>
Checking your add-ons for compatibility with this
</label>
<separator class="thin"></separator>
<progressmeter id="versioninfo.progress" mode="undetermined"></progressmeter>
<hbox align="center">
<image id="versioninfo.throbber" class="throbber"></image>
<label id="versioninfo.status" flex="1" crop="right"></label>
</hbox>
<separator></separator>
</wizardpage>
<wizardpage id="mismatch" pageid="mismatch" next="checking" label="Incompatible Add-ons" onpageshow="gMismatchPage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<listbox id="mismatch.incompatible" flex="1"></listbox>
<separator class="thin"></separator>
<label>
Firefox can check if there are compatible versions…
</label>
</wizardpage>
<wizardpage id="checking" pageid="checking" next="noupdates" label="Checking for Compatible Add-ons" onpageshow="gUpdatePage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<progressmeter id="checking.progress"></progressmeter>
<hbox align="center"></hbox>
</wizardpage>
<wizardpage id="noupdates" pageid="noupdates" label="No Compatible Add-ons Found" onpageshow="gNoUpdatesPage.onPageShow();">
<description></description>
<separator class="thin"></separator>
<hbox id="updateCheckErrorNotFound" class="alertBox" hidden="true" align="top"></hbox>
<separator class="thin"></separator>
<description id="noupdatesCheckEnabled" hidden="true"></description>
<vbox id="noupdatesCheckDisabled" hidden="true"></vbox>
<separator flex="1"></separator>
<label></label>
<separator class="thin"></separator>
</wizardpage>
</nowiki></pre>
I do not see much about coloum 14, but I am guessing this file is stored somewhere and its corrupt. Update.xul suggests that it is the update file. Do you still have this in your downloads folder? There are two places for update and for a clean reinstall:
[http://www.mozilla.org/en-US/firefox/new/] in a private window will give you a new install or you can choose from here: [https://www.mozilla.org/en-US/firefox/all/]
This is what the file should look like; [http://hg.mozilla.org/mozilla-central/log/7a2edc5171e6/toolkit/mozapps/extensions/content/update.xul] If you can copy and paste that file from a working browser we can see the issue, but it will just look the same as the error.
if you can replace the contents of the file locally with what it should look like it will fix the error, but who knows if there are other errors. May be best to delete the updater and save all the profile folder contents.

I want to backup my pinned tabs and my bookmarks as they have been lost several times after windows updates

several times after system crashes and sometimes after windows updates my pinned tabs have disappeared. How can I back up the pinned tabs and bookmarks??

Firefox stores the bookmarks and the browsing history in the places.sqlite database file..
There are 10 rotating daily JSON backups (bookmarks-####-##-##.json) in the bookmarkbackups folder within the Firefox profile folder, one for each day that Firefox is started.
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
Pinned (App) tabs and tab groups are stored in the sessionstore.js file.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
See also:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Blue screen: HP Pavilion dv6 after Windows update on Aug 1.

Last year or so, I had this blue screen issue with my dv6 laptop and was solved by uninstalling KB2670838.And things have been very peaceful since then, but the blue screen re-occured recently after windows update last week.The updates were suggested by HP Support agent installed in and was for getting ready for Windows 10 installation.But my pc gets blue in every 3 min now, so I un-installed all updated job occured last week as temporal solution. Though I wish to be ready for Windows 10 installation, I need to have operable PC for my work.(This is Win7 sp1, home eddition) It would be great if anyone could assist me on this. Thank you, Piko.

I have this problem. It happens without any warning.
I don't know the reason. Please help me.

Satellite L500 - System hanging on startup screen after Windows update

Hi,
I'm hoping someone can help. My Satellite L500 is hanging on the blue startup screen after it restarted after a windows update, the mouse arrow is moving, and there seems to be some hard drive activity with some flickering in the system indicator lights. Other than that, nothing? Any ideas?
Thanks,
Denise

It was stuck on the Windows 7 welcome screen, all I had to do was hold the power button down for longer and restart it properly. I was just concerned as they always say not to turn the computer off during an update.
*All good now* thanks anyway :)

Satellite A200 continuously restarts after windows update

Hey all,
The model Satellite A200-1GB (PSAE6E) worked perfectly for two years now (with Vista 32bit).
Since running windows update yesterday and restarting, the laptop's been stuck in a loop of restarts, immediately restarting after the "POST" screen (Toshiba logo, etc) with a flash of blue screen.
Holding F8 to read the message, it says INACCESSIBLE_BOOT_DEVICE (0x000007B) ...
Trying to restore to a point before the failure failed for unknown reason (gave an error).
Research in Google yielded a possible cause - maybe harddrive driver has changed to an incompatible type. There were some suggestions to turn off AHCI support in bios, but it doesn't have that option.
The bios was not updated since purchase (it's version 1.4), but I can't update it because it seems the only update provided by Toshiba requires windows.
Anybody has any clue how to fix the computer without reinstalling windows? Anything?
Thanks in advance,
Ofir

Hi
I doubt it could be a hardware error (my personal opinion) but nothing is impossible you know
The point is that a BSOD can be caused by hardware error but also by an serious software issue
In my opinion something went wrong during the update
If you are not able to start the OS even using an safe mode then a new OS installation would be the last chance to get this issue sorted
I think you should try a new install in order to find out if this could be a hardware issue because there is a small rest of risk that this could be a hardware problem

Satellite c55 - wifi not working after windows update

Laptop is running windows 7. Laptop rebooted itself and did a windows update, once i logged into it, the wifi is not located. This is the update that ran today. Update for Windows 7 for x64-based Systems (KB2952664)Installation date: ‎7/‎28/‎2015 11:44 AMInstallation status: SuccessfulUpdate type: RecommendedInstall this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.More information:
http://support.microsoft.com/kb/2952664Help and Support:
http://support.microsoft.com Help!

Kim, a Restore point should have automatically been made by Windows BEFORE processing the update. You should run System Restore using that restore point and then HIDE that update so that it isn't ever installed again.

Satellite L750/755 - No connection after Windows Updates

HI, I have a brand new L750/755. network adapter is atheros.
after installing the windows updates (85mb, framework 3.5.1, security updates) There is no way to connect to the internet.
The laptop will still find any accesspoints, but only connect with limited connectivity or no internet access.
I had to restore the laptop to before the updates installed to fix this.
how can I get round this issue, or failing that how can I get these updates to stop intalling on shut down?
thanks in advance
ps I had already tried installin the latest network adapter drivers, changing the power settings, and connecting to other routers. nothing worked.

> I had to restore the laptop to before the updates installed to fix this.
Do this and after doing this disable automatic Windows update. When you do Windows update manually, install important updates only. Before you start update check listed optional updates and disable driver updates.

Satellite L850-1HP unable to configure downloaded Windows Update files

My laptop had issues from day one which were first the CD-ROM not opening, then the webcam and microphone turning off forever and not being able to be turned on again ever, and last but not least, this summer, my laptop would not connect to any WIFI network at all, it wouldn't even find one.
I went to the place where I bought it for support, they sent it for repairs, a week later, I get it back, it's been restored back to factory settings, everything seemed fine, CD ROM functional.. webcam and microphone too.
So I thought I'd check around and start tyding things up to my liking, then I realise that I need to download some updates from Windows Update, so I do, about 100+ updates needed, I start downloading them, but they don't download up until the 20th minute that it's stuck at 0%, which seemed shifty to me, because then it just jumped up to like 10% and progressed forward.
After downloading the updates, or so it said that it had, I restart the laptop in order to get them working and configured properly.
It didn't. After I clicked restart, it started shutting down, saying that it's configuring and at about 20-30% it rebooted, then it loaded up the same screen saying that it's configuring updates, then it says it failed and says that it's restoring data back to normal, which it never freaking does.
After about two hours of waiting for it to do anything at all, I reboot the PC, same stuff.
Reboot again but this time I restore things to factory settings once more, takes me about 1hr again with a complete wipe of data (of course the OS stays and toshiba apps too), set everything up, name and stuff, accept terms and conditions, blah blah, OS starts up, I check everything and restart.
After the restart, I decide to not configure anything until I've downloaded all the windows updates, so I do just that, BUT, I get the same error again, shifty-slow download of updates, restart and get the same message that it cannot configure updates, and the forever-long wait for the laptop to "restore" data back to normal, which it hasn't done, again.
I'm completely clueless as to what I should do, I've restored factory settings once more but this time I'll just wait for some feedback or try to do whatever I find on these forums that is useful.
Please help.

Hi
The Satellite L850-1HP was preinstalled with Win 8 64bit.
Do you have problems installing the Win 8 updates?
Usually you will get an error message if an update has failed.
Could you post this error message?

Satellite C70D-B-105 microphone missing after windows update

Similar Messages

Maybe you are looking for