Satellite C75-A won't boot on battery alone

Hello everyone!
let me explain my little problem:
I own a *Toshiba satellite C75-A*. That is quite recent (at max 1 year old) with windows 8.1 running.
I can boot it on power supply it works perfectly. Battery inserted or not everything is fine.
But the problem is when i try to boot it with battery only. In fact, nothings happen. Except a little sound when i press the power button. LEDs turns on for a second, then nothing.
The battery seems to work fine. When booted on windows, the battery is charging (100%). And if there is a Power shutdown or if you unplug the power supply, the battery take the hand. And the battery seems to have a normal charge life time.
I tried to remove the battery, unplug the power cord and to maintain power button for several minutes, then to plug it again. But nothing changed.
I upgraded the BIOS as i have seen that was recommended. Nothing changed.
I browsed this forum in hope for some help, but i found nothing that worked.
I apologies in advance if there was already a post about this, i searched but didn't find it.
In hope some of you can help me.
In any case, Have a nice day!

From my point of few the battery isnt recognized when the notebook is in shut down mode.
The battery is recognized only if the Windows system has been already booted up
I cannot say for sure why the battery isnt recognized before booting up the system but it could be possible that this battery malfunctions.
Of course this is my personal opinion but its advisable to test another good working and compatible battery.

Similar Messages

  • HP Compaq 6715s won't boot on battery after BIOS update

    Hello!
    I updated the bios of my HP Compaq 6715s with the latest version F.0E I downloaded from HP support site.
    Everything went fine, but now it won't boot on battery alone anymore. It just flashes amber light on power indicator and shuts down. If the charger is connected and later disconnected when it starts loading Windows, everything is fine.
    Please help, what should I do?

    Hi:
    You can try performing a hard reset of the notebook in hopes that it will solve the problem.
    Here is the link to the instructions for this procedure.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01684768&prodT...
    If that doesn't work, I'm afraid something went kerflooey with your BIOS udpate.
    Paul

  • Satellite A205-S5804 won't boot.

    My computer Satellite A205-S5804 won't boot.
    It won't run on safe mode, and it won't run the system restore.
    It remains black with a cursor, if anything at all.
    How do I get my computer back on?

    Hi
    Youve got a cursor which is flashing in the upper left corner?
    In such case you should check of the HDD has been recognized by BIOS!
    If the HDD is listed in BIOS then I would recommend checking the HDD using the drives fitness test:
    http://www.hitachigst.com/hdd/support/download.htm
    To run the drives fitness test you must download the appropriate creator or image and create a self-booting media.
    Check it!

  • Satellite L40 18P won't boot anymore

    Hello folks,
    my Satellite L40 18P won't boot anymore. All I get is the Power LED to go green. The DVD ROM drive blinks and I can open and close it - but that's it. Nothing else happens.
    Any idea in the forum what I can do to get the notebook boot again ? Or please ask questions for additional details.
    many thanks, Johi 13

    Hi,
    wow, that was fast.
    No, I can't see anything - the screen stays black. I do not hear the HDD start, neither do I hear the fan.
    This behavior appeard for the first time yesterday evening.
    Last activity was (if I remember correctly) closing the lid and sending the notebook to standby.
    So far, I haven't tested it with an external monitor.
    thanks, Johi13

  • Satellite P775-S7375 Won't boot up

    Hello,
    I have a fairly new (about 4 months old) Satellite P775-S7375 that suddenly won't boot.  When I press the power button, the lights light up and I can hear a fan run for about 3 seconds, then it shuts down.
    I have tried pulling the battery, and power cable out, pressing the power button for 60 seconds, putting the power cable back in - same result.
    I tired the above,  but with putting in a fully charged battery instead of the power cable - same result.  This laptop is not even getting to the intal spalsh screen or BIOS screen.  It's literally turning itself off after about 3 seconds.
    Any idea on what I should try or is this a dead laptop needing to be sent back to Toshiba for service?
    Thanks!

    It was the motherboard.  I shipped it back to Toshiba and they fixed it.  Unfortunately for me, their quality control is awful and they forgot to reattach the DVD drive to the case.  A tiny screw is missing. So now when I eject a CD/DVD the whole drive slides out of the bay.
    After spending the better part of an hour on the phone with the support staff (which involved me being transferred to a number that was no longer working, then being transferred to a repair depot phone that said their hours were M-F 8am-8pm EST and oh, they're closed right now even though it is 11am on Monday???), I have to ship the laptop back across the country so someone can put in a $.01 screw and ship it back across the country.
    I've learned my lesson about Toshiba.

  • Satellite C655-S5128 won't boot up

    Satellite C655-S5128 shut down due to low battery before we could get charger plugged in.  Now it won't boot up.  It's stuck on the Toshiba logo page that also says to press F2 or F12 for setup/boot options.  There's also a faint beeping sound we've never heard before. After a while of pushing buttons an error message popped up stating no bootable device can be found.  Any suggestions are appreciated.

    Satellite C655-S5128
    Let's try a proper system reset, and see if this helps bring your laptop back.  Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, when you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, then try to boot into Windows again.
    Let us know what happens. Good luck.
    Mike

  • Satellite Pro A10 won't boot up - Where to get the disks

    I have a Satellite Pro A10 which currently won't boot up Windows (XP) as it says
    The following file is corrupt or damaged:
    C:\Windows\System32\Config\System
    The Tools & Utilities CD-Rom which came with my laptop has unfortunately been scratched and won't boot.
    I have the two System Recovery Disks, which are fine.
    My questions:
    1. Is it possible to purchase a replacement Tools & Utilities CD-Rom?
    2. If so, where from?
    3. Is there a way of restoring my laptop without having to completely reinstall everything and lose all my files?
    Thanks
    Message was edited by: Stuart_2007

    Regarding the point;
    a) Usually it should be possible to order the Tools & Utilities CD-Rom but I ask why?
    b) You can purchase the CD from the ASP in your country
    c) The older recovery CD supports an expert mode. You can use this mode to choose the partition where the OS should be installed. In such case only this partition will be formatted.
    But listen dude. You dont need to order the Tools & Utilities CD because on this CD you will find only the Toshiba drivers which can be downloaded from the Toshiba page too.

  • Won't boot from battery or AC after left unplugged for a month

    I left my PowerBook 17" 1.5GHz unplugged for a few weeks, and now it won't boot, whether it's plugged in or not, battery in or out. The band around the AC plug glows orange.
    I've tried resetting the Power Manager by holding down shift, control, option, and hitting power to no avail.
    I've tried holding down the power button for 10 seconds.
    No sound, no screen, nothing. Just seems dead. Any ideas?
    Is there a hardware reset button?
    Could the internal battery be dead?
    What else can I try?
    Amit

    One thing to try, and hopefully it is this simple, would be to remove the battery and plug it in over night and give the internal battery a night of charging. Then, try to start it up in the morning.
    I don't know exactly what the Apple Store told you, but maybe the easiest fix is the answer.
    I don't have a 17" G4, but I've had other laptops that would not start when both the external and internal batteries are dead.
    Shane

  • Satellite L850-161 won't boot from recovery disk

    When I got the laptop in 2012 I created 4 recovery disks but since then i've had my HDD replaced in my SATELLITE L850-161 but it has the recovery partition with nothing in it and the laptop won't boot from disk either so I can't format it but really need to, any suggestions??

    If you have 4 recovery discs be sure you start installation with disc number 1. After HDD exchange you should be able to use created recovery discs for recovery image installation.
    Does some other bootable disc starts properly?
    To be honest I dont understand how new HDDD can contain recovery partition that will be created if recovery image installation works.
    Problem is that in such situation you dont have many options. In worst case you can order original recovery disc for your machine.

  • Satellite Pro A10 won't boot (HDD seems to be missing)

    Hello, I hope someone can give me some advice on this problem: I have a 2 year old Satellite Pro A10. Recently it won't boot at all and I notice that if i look at the directories in the C: drive using the command prompt it says 'file not found'. Can't start Windows at all, not even in Safe Mode.
    Using the recovery disks doesn't help either I get messages like No such fixed Disk and 'Extraction Failed'.
    does this mean I have:
    1 A damaged hard disk
    2. Faulty connections to the HDD? - if so how do I rectify this?
    the system didn't crash before this happened, it failed to load up when I started it.
    Would appreciate any help.
    Thanks,
    Scl

    Jeffery and Ivan25 are correct in HDD malfunction. Try and remove and reattach the HDD and see if BIOS sees the HDD. If not you are going to need to order a replacement HDD. If BIOS does not even see the HDD then you wont even be able to install any Operating system, because there is logically nowhere to store the data being copied.
    Take it to an Authorized service provider near you to have it checked out. Could also very well be the HDD Controller on the Motherboard has went bad and can not detect any HDD connected to the motherboard even if it is new and unused.

  • Satellite C870D-12F won't boot Win8

    Hi
    My Satellite won't boot (windows 8) anymore, and I'm also not able to reset to factory settings.
    The harddisk is still ok if I put it in another PC I can see all the partitions.
    Does anyone sees something wrong in the partition type or properties?
    Thanks in advance for any help.
    Kindest regards
    +Message was edited: part of the message has been removed+

    Hi All
    No help was afforded ,so I fixed it myself!! And WITHOUT the recovery medium.
    I installed windows 8.1 again from a downloaded iso (I didn't had a key for this version).
    Now I had an unregisterd windows running but "Recovery back to Factory setting" was still not available.
    But I was able to get the recovery partition to be recognized again with this procedure
    I downloaded Visual BCD: In here I check alt the path's in the BCD store and especially if the GUID of the "Windows Recovery Environment" is the same as the one used for "recoverysequence" in your "OS loader". You can also get here the WinReBCD id (GUID), you will need this in ReAgent.xml
    A GUID looks like this: {ecca5163-d630-9447-a175-fc367f40a9e5}
    Second thing: check in c:\windows\system32\recovery\Reagent.xml that
    WinReBCD, ImageLocation, PBRImageLocation, DownlevelWinreLocation and OSInstallationLocation are pointing to the right "path, GUID and Offset".
    +In my case ImageLocation, PBRImageLocation and DownlevelWinreLocation point to partition 1 (first on).+
    +OSInstallationLocation points to partition 6 (last one)+
    +example:+
    +<ImageLocation path="\Recovery\WindowsRE" id="0" *offset="1048576"* guid="{ecca5163-d630-9447-a175-fc367f40a9e5}"/>+

  • Satellite L745-S4310 won't boot up - black screen

    We have had this L745-S4310 laptop for only 3 months or so and suddenly it won't boot up.  The screen is black and I can hear the fan running, but it won't boot up   Have tried removing battery to reset, but to no avail.  Any ideas?

    You could try the other steps outlined in this article.
    Computer will not turn on
    If nothing works, and your unit is still on warranty call Customer Support and get a warranty authorization. In this case, if I was you, I would take it to a local Toshiba ASP, and try to NOT send it in for depot service.
    Customer Support in the United States
    Computers: (800) 457-7777 (toll-free) or (949) 859-4273
    Locate a Service Center
    Good luck.
    Mike

  • Satellite L20-260 won't boot up, everytime it freezes with no reasons

    Hi all,
    I've got a sad problem with my satellite, after 3-4 days I've installed a new OS (i've tried with XP SP2 and Kubuntu) system won't boot up, everytime it freezes with no reasons, the only way is to perferom a new OS installation. Could it be an hardware problem maybe related to RAM or HDD?
    10x, Daniele.

    Hi
    This is not easy to say if the problem is software or hardware related.
    You should install the OS from the Toshiba recovery CD and test the functionality again
    If the notebook will start freezes again immediately after recovery CD installation then it could be a hardware problem.
    You could try to use the MemTest 3.5 tool.
    It checks the memory for malfunction.

  • Satellite A40-231 won't boot after wrong firmware update

    Hi,
    i own a toshiba satellite a40-231.it won't boot anymore because i have flashed it's dvd-rw drive(sdr-6112) with the wrong firmware and i also made a big mistake making a non-bootable active dos partition,trying to flash the correct firmware.So, my question is: can i boot from usb flash disk?i believe it's the only option i have left, if not network boot.
    Thanks in advance!

    Hi
    As far as I know its not possible to boot from any other devices as from USB FDD / HDD / CD-ROM / LAN
    You could boot from network but if you want to install the OS via LAN you will need an RIS server. But its not very easy to do it without any additional experience. So I think this option is nothing for you.
    It seems the drive is dead or malfunctions and therefore the best idea is to replace the device drive. I know, its hard to hear that but I dont see any other solution

  • My Satellite C50-B won't boot from HDD

    Machine Details:-
    Model Number: PSCMLA-03F07Q
    Serial Number: XE343127P
    Computer won't boot from harddrive. No error messages, just Toshiba splash screen at end of self test.
    A couple of times a reinstall of the operating system seemed to correct the problem but then it would go again, now the problem is consistent.
    I've narrowed down possibilities to a BIOS fault, reasons-
    System boots from USB without any problems. Installing of operating systems proceeds with no errors. Harddrive SMART data reports a perfectly healthy harddrive. Memcheck returns no errors.
    The obvious solution is to reload the BIOS, just resetting it achieves nothing. But here's the problem.
    The updated BIOS 1.4 that the Australian website offers is a Windows program and the computer can't boot Windows.
    Obvious answer is to use a bootable USB stick with a "live" operating system on it but all of these systems are Linux and the BIOS update is a Windows program. So much for intelligent solutions.
    Downloaded Bios version 1.7 from European site but the iso inside that rar file is empty, 25 Mb in size but nothing in it according to Linux. Tried running it's program on a Win7 64bit computer and it returns an error that it could not find the correct iso file.
    I've submitted a support request by email to Toshiba but they reckon it could take 3 days to get a reply so I thought I'd ask here as well. Can anyone please point me to a working copy of the latest BIOS update disk for a Satelite C50-B laptop? Please note - this model doesn't have a CD drive so the iso must be compatable with USB boot.
    Cheers,
    Andrew.

    OK, found the answer.
    Bios was corrupted but not critically so, turns out that this laptop should never have been able to boot linux in the first place. It's only because of the corrupted bios that I got away with it a few times. Ended up getting a valid copy from a blog in Russia.
    Toshiba used to be a byword for quality in the computer world but this is definately no longer the case due to poor (cheap) new quality control practices. Also it seems that Toshiba is no longer really concerned with making computers, they're more interested in selling Windows and GE Insurance Policies disguised as extended warrantees.
    From now on I will definately be making sure that my customers understand the troubles they can have when buying Toshiba Laptops.
    As for running Linux, I'm including this so that it will help other poor unfortunates who thought they were buying a computer instead of just a Windows platform.
    The problem started with Microsoft, their proprietry MBR boot system was no longer valid in a modern world and they had to adopt the open source GPT partitioning system with UEFI boot, but in typical Microsoft fashion they couldn't stick to the widely accepted standard conventions for how the EFI boot partition should be laid out. And Toshiba is Microsoft's new "friend with benefits" so instead of sending Microsoft back to the drawing board they've rewritten their bios so that it looks for the Microsoft Win8.1 EFI boot partition and ignores all others.
    The quick answer is to edit your boot partition after install and make it look like Microsoft's. Please note that you don't have to do this with other brands of computer, only Toshiba.
    Here's a link with full instructions including pictures, it's written for Ubuntu but is easily adapted to almost any other operating system.
    http://linuxontoshiba.blogspot.de/2014/05/getting-ubuntu-1404-to-boot-from.html?showComment=1410953307121
    Hope that helps a few people before it gets deleted.
    Cheers,
    Andrew.

Maybe you are looking for

  • How do I use xfinity with Apple tv

    Anyone have directions how to use Apple TV with my xfinity account. I cannot run any additional cable in my new home.

  • A GUI problem when using sockets

    I have a problem with Client.java. it creates a socket to connect to a serversocket. I do this through the method "runClient()" . the problem is that if I call runClient from an actionlistener add to a button. here the graphics of the window will dis

  • HT2463 Home sharing stopped working. Windows 8 Netgear wndr3700 router

    Have two AppleTv's that home sharing stopped working on. Windows 8 Pro, Netgear WNDR3700, Dell 9100 XPS. Have gone through two calls with Appletv support but no permanent fix. Homesharing says it's on. on the appletv's and itunes, all with the same i

  • Maintenance Optimizer Error: TMWFLOW/MO_BACKEND111

    Hello, We get an error when trying to use MOPZ so that it automatically calculates the files to be downloaded. /TMWFLOW/MO_BACKEND111 Not all instances required for the installation are active.  ++++++++++++++++++++++++++++++++++++++++++++ I would li

  • Photos Sent Not Received

    I couldn't decide if this would be better posted in messages, mail or photos, but I haven't been able to receive a photo sent via Email Photo function since I started using iPhone 4. The messages by all appearances go out, but no matter what email ad