Satellite C850-1G3 touchpad stoped working - keyboard very flexing

I purchased a new C850-1G3. Touchpad doesn't work well, sometime stop to working (also during Win8 first installation). The keyboard has bad feeling: very very flexing (like netbook of some year ago).
Feels cheap.
What do you think about? Touchpad stop working is normal?
Thnks

>Feels cheap.
The Satellite C850-1G3 is a cheap notebook. You can get it for about 370 Euros.
>Touchpad stop working is normal?
Even if the notebook is cheap, the touchpad should work properly.
But what do you mean exactly by stopped working?
Can you enable or disable the touchpad by pressing Fn + F5 (or just F5)??
Did you try to modify the touchpad settings? (can be found in control panel -> mouse -> last tab pointing device -> settings)

Similar Messages

  • Lenovo Ideapad S400 touchpad stoped working

    My touchpad stoped working and need help

    Update! 
    This is by no means solved, but I do think it's >improved<.
    I found a newer driver (v. 11.4.7.1). The mouse pointer still has some delay, but it isn't as unbearable as it was before. I do find that the left click "button" is not always reliable (the single tapping is more reliable). But it's better and corroborates my thought that this is mainly a software issue. I also disabled all the multi-finger functions.
    The link for the new driver is here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032199
    Let me know if you find this helpful!
    J.

  • Satellite C850-A797 webcam doesnt work

    I have Toshiba Satellite C850-A797 and my webcam doesnt work
    I think it is because of Windows update and *the new software interrupt every time i download it,*
    It is problem of the server of toshiba as i think
    PLEASE HELP!!!!!!!!!

    Hi
    Question 1)
    What system do you have? As Im no mistaken the Satellite C850-A797 was preinstalled with Windows 7 64bit.
    The webcam drivers as well as other drivers for Satellite C850 series can be downloaded here:
    http://www.toshiba.eu/innovation/download_drivers_bios.jsp
    I actually downloaded the webcam driver for the above page and it worked properly.
    Check this [webcam driver v 2.0.3.39 for Windows 7 |http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=null&language=13&selOS=30&selType=315&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=315&page=1&ID=88046&OSI D=30&driverLanguage=42]

  • Satellite A200: Some devices stoped working after BIOS update

    I recently updated my BIOS to V2.60 on my Sat A200
    but ever since i apdated the BIOS some of the hardware components stoped working.
    So i decided to use the product recovery CD but it wont work anymore.
    Each time during its loading stage the system crashes and i get a blue screen mentioning a file called CLFS.SYS as the root of the problem
    Is there a solution for my problem?

    Hi
    What Sat A200-xxx do you have exactly?
    From my experience there are different BIOS versions for different operating system.
    The Vista and XP needs different BIOS!
    But I wonder why the Toshiba recovery disk does not function anymore? ?:|
    Usually you should be able to recover the system no matte what BIOS has been installed.
    Did you try to format the HDD firstly using another disk for example like Win XP?
    Check this!
    I think you should format the HDD again and then should try to recover the notebook using the Recovery disk

  • Satellite L series - Touchpad not working when AC charger pluged in

    guys.... pls, some help... i have headaches ;))
    my touchpad its almost frozen, when i plug my AC charger
    its working only on battery
    when i plug the charger, the touchpad its almost frozen... if i put an USB mouse, its working but still, not perfect... the cursor moves a little slower... and, the buttons its like they have no strenght when i push them... sometimes works, sometimes i have to push 2 or 3 times, to click''; the touchpad buttons are working perfectly.... so, i use the mouse to move the cursor and to click , i use the touchpad buttons
    have any ideea why ?
    =>> i did uninstaled and reinstaled the drivers
    =>> i even did a bios update, but nothing changed
    =>> i disabled and also uninstalled the ACPI from the battery, with no use
    =>> NO, its not a FN problem
    pls... ? :)

    Hi
    There are some threads in this forum where some users reported a similar issue.
    As far as I know the problem was a AC adaptor malfunction.
    Using new, compatible AC adaptor has solved the issue.
    Good luck!

  • Satellite Pro L300-EZ1004X - TouchPad stopped working, BIOS update does not help

    I have a Satellite Pro L300-EZ1004X laptop. Few days ago TouchPad stopped working. This is not a Fn + F9 issue.
    In Device Manager it looks like hidden device and has (!) on it. Re-installing Synaptics drivers, updating them, removing the device in Safe Mode - nothing works. (TouchPad did not work in Safe Mode). One of the forums mentioned BIOS update. For some strange reason the latest BIOS for this specific laptop is from 2008 (ver. 1.5). Other L300 laptops have option to update BIOS to ver. 2.20 (2010) but not mine! I tried to load it (ver. 2.20)from Windows and from boot disk without success. I installed BIOS ver. 1.5. After reboot - keyboard stop working! And TouchPad ... still dead and still appears as hidden device. Using external mouse I restarted the laptop and get into the BIOS settings. In Advanced Settings disabled TouchPad completely. KEYBOARD START WORKING IN WINDOWS!!!
    Any suggestions on how to make this TouchPad to work? Or how to get newer BIOS for this Laptop?
    Thank you in advance!

    Sounds like it has died, you can purchase a new one from a parts supplier and pay someone to install it or if you are any good with such things you can try to do it yourself.  I suggest just sticking with the external mouse.
    Welcome to the Toshiba user forums.
    For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
    Being super active is never a requirement

  • Keyboard and touchpad not working

    Good day My keyboard and touchpad stopped working all of a suuden, and I need help. My computer is Toshiba Satellite E55 A-5114, this has happened to me before but only the touchpad stopped working and it fixed whenever there was a system update, now I've updated the system and installed the recent drivers and still not working, any ideas?

     
    Satellite E45t-A4300
    There appears to be an epidemic. My guess is that a Windows update which changes a driver causes it.
    So turn off automatic update and inspect them one-by-one. They are offered on the second Tuesday of each month.
       Windows Update: Frequently Asked Questions
    I install only those marked Important or Critical. In particular, stay away from those which change a device's driver. Get driver updates only from Toshiba.

  • Touch Pad stopped working on my new Satellite C850

    I have new Toshiba Satellite C850-b293 after a day may touch pad didn't work.
    Can somebody help me? I check already the setting and I set into default, but still now changes.
    Please help me....

    On this virtual way it is not easy to help. We dont know what is wrong there.
    Please be sure touchpad is enabled properly. Use FN+F9 key combination and be sure touch pad is enabled properly.
    > I check already the setting and I set into default
    I dont know what do you mean with default but if possible reinstall OS again and test touchpad functionality with clean preinstalled OS and factory settings.
    How to do this you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  • Satellite C850-1cp problems after changing italian keyboard

    Hi
    i've bought a toshiba Satellite C850-1cp and i had some problem (i dropped some coffee on the keyboard)
    so i brought the mobile to the tech support and i decided to change the native keyboard (EN) with an italian keyboard and now i have problem with the usb port: any mouse, or others usb device are not recognized.
    A friend of mine told me to restore win 8 unsuccessufully because the function keys don't work....
    Please help me

    In the past Ive changed keyboard several times and everything went well.
    Have you used 100% compatible keyboard?
    Ok maybe you should install original recovery image after keyboard replacement. To start recovery image installation you don't need function keys.
    If you use Win8 make complete shutdown as described on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and after doing this restart your notebook and use F12.
    Please post some feedback.

  • Satellite C850-B635 and Win7 - card reader is not working

    My notebook came with windows 8 and the card reader was working
    but I installed windows 7 64-bit , downloaded all required drivers to my notebook , but the card reader is not working now .
    I downloaded a driver called card reader controller but it didn't work as well
    I don't know if there is a problem or there is a driver that I should install and I don't know .
    please help me solving that problem .
    In my windows device manager these devices isn't recognized :
    *PCI simple communications controller
    *SM Bus Controller
    *Unknown Device
    I tried to search in my drivers download page in Toshiba website but couldn't find these
    please help me making my card reader working again.
    Regards
    Message was edited by: domaking

    To me the case is simple and the reason why the SD card reader does not work is that an compatible driver isnt installed.
    My theory seems to be correct since the SM bus controller and PCI simple communications controller appear in the device manager and I guess one of these devices belongs to the SD card reader/controller.
    I think you should simply install this Realtek Card Reader Controller which I found on the Toshiba EU driver page
    http://support1.toshiba-tro.de/tedd-files2/0/carc-20130924161048.zip
    Furthermore you should install all other Win 7 drivers as well as Toshiba tools available for Satellite C850 series.
    Very important is the chipset driver, USB 3.0 driver (Win 7 needs this driver to control the USB 3.0 port), display driver. etc
    Not very essential tools are Bulletin Board, Online Product information, Reeltime, etc such additional tools dont improved the notebook performance so its up to you if you want to use these software parts

  • HP pro x2 410 g1 on Windows 7 ... TouchPad Not Working! Keyboard works fine.

    I am currently trying to set this up on Windows 7. I have tried both x86 and x64.  I am haveing no luck however finding the driver for the touchpad.  The keyboard works great but I am currently having to use a USB mouse.  I have tried a bunch of Synaptics drivers from HP and the Synaptics website with no luck.  
    Any ideas?  This is the only thing holdng me up.
    Thanks
    This question was solved.
    View Solution.

    Hi nick02306,
    Your Pro x2 410 G1 is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Windows 8.1 Onboard Keyboard and Touchpad Stopped Working.

    After upgrading to Win 8.1 my keyboard and touchpad stopped working suddenly.  They both worked fine for the entire Windows 8.0 release.  When I upgraded to 8.1, they both worked for about 3 months.  Then what started happening is the computer
    would freeze during the startup process.  
    Now they both don't don't work.  But a USB powered mouse works.  So with a USB powered mouse and the on screen keyboard I have been troubleshooting.  I have removed the drivers from the device manager, reinstalled the drivers, searched for
    driver updates etc.  Nothing works. 
    Can someone please point me in the right direction.  PC is kind of useless at the moment.

    Hi,
    Kindly check this application that can show incompatible/unwanted/untrusted/ applications then remove these with different kinds of PC cleaner/Application removal tools.
    http://www.getsysteminfo.com/
    After Downloaded, Run the Application and Save Report, Upload the Report and Press Submit Button and Click Read the report as an Expert.
    If you found anything in these 2 Auto analyses
    then find the solution.
    1) Driver To Update:
    2) Application to Update:
    Good Luck!

  • SD card reader doesn't work on Satellite C850-1CN after Win 8.1 install

    Hi,
    Since I installed Windows 8.1 on my computer Satellite C850-1CN ref. : PSKCAE my SD port does not work
    I would like to know if there is a driver I need to download because I searched the site for a pilot port but in vain ...
    Sorry for my English I speak French and I hope I'm in the right forum

    Hi
    You have to download and install the card reader controller driver for Win 8.1 system
    This driver should be the right one:
    [Card Reader Controller v 6.1.8400.30136 Windows 8.1 - 64 Bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=3417&language=13&selOS=all&selType=316&year upload=&monthupload=&dayupload=&useDate=null&mode= allMachines&search=&action=search&macId=&country=a ll&selectedLanguage=13&type=316&page=1&ID=88526&OS ID=46&driverLanguage=42]

  • Sleep and charge utility is not working on Satellite C850-B763.

    Hi
    I have Toshiba Satellite C850-B763 windows 8 single language.
    When I try to run sleep and charge utility I get the message "cannot get hardware information".
    And after clicking ok, I got the Sleep and Charge control panel but the boxes are disabled and the battery bar is working fine.
    Can you assist please?

    Reinstall the the Toshiba System Driver
    [Toshiba System Driver v1.00.0015|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=null&language=13&selOS=40&selType=all&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=all&page=3&ID=84513&OSI D=40&driverLanguage=42]
    The TOSHIBA System Driver is the software driver for the TOSHIBA Systems. Its a follower of Value Added Package.

  • Keyboard and touchpad not working after Windows 10 update

    after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine 

    It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

Maybe you are looking for

  • ITunes on Vista... no error message but won't install

    I am using Windows Vista and recently had a new harddrive put into my laptop, and am reinstalling programs. I'm having trouble with downloading iTunes. When I get the first window that says "You have chosen to open iTunesSetup.exe" I click Save File

  • How can I create editable forms on an iPad?

    I would like to be able to have a form on my iPad (do not care what format it is in) that I can fill in fields and then print out or email. I do not need to save the data entered into the data fields on the form.

  • Change desktop background every N minutes broken

    so i posted about this before, where i had my background set to change every 5 minutes, but it would happen more often. i was recommended to delete and rebuild the the particular plist controlling this... thought it did the trick, but now i've change

  • Manually reopening a queue when it is scheduled as closed.

    Hello everyone,           I am trying to figure out how had add in a variable or a step in one a my call centers. there is a scheduled time on Wednesdays when our call center is "closed for training" and they would like to have the option of remainin

  • Putting " into a string

    I have a long string which includes " how do I put this into a string as String s = " he said "hello"..." ; obviously doesnt work