Satellite C850-A797 webcam doesnt work

I have Toshiba Satellite C850-A797 and my webcam doesnt work
I think it is because of Windows update and *the new software interrupt every time i download it,*
It is problem of the server of toshiba as i think
PLEASE HELP!!!!!!!!!

Hi
Question 1)
What system do you have? As Im no mistaken the Satellite C850-A797 was preinstalled with Windows 7 64bit.
The webcam drivers as well as other drivers for Satellite C850 series can be downloaded here:
http://www.toshiba.eu/innovation/download_drivers_bios.jsp
I actually downloaded the webcam driver for the above page and it worked properly.
Check this [webcam driver v 2.0.3.39 for Windows 7 |http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=null&language=13&selOS=30&selType=315&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=315&page=1&ID=88046&OSI D=30&driverLanguage=42]

Similar Messages

  • Webcam doesnt work on my Satellite A300-243 with Win7 32bit

    I have A300-243 PSAG8E, after installed win7 my webcam DONT WORK.
    it had been worked before with VISTA AND spype.
    I upgraded the bios and updated drivers.
    Webcam is not listed driver of win7 32bits of A300.
    As it suggested in one of the forums i downloaded other driver from A500/ A350 ect non of them worked.
    displayed on the screen:
    "Webcam is either disabled or has failed. Please check your webcam settings" also Camera is not listed in Device Manager." imaging not listed.
    I restarted and used cccleaner after my attemps and nothing succeded.
    What else I could do.
    PLEASE HELP ME.
    ORNA

    I have an A 300. I just fixed this problem by replacing the cable. It took me 3 hours to disassemble the laptop (clean it) and put it back together again. Now it works like New! The spare part number of the cable is V000932480.
    In my case:
    - camera stopped suddenly for no apparent reason.
    - I didn't upgrade my OS or anything
    - it beep every time I closed the screen
    - It didn't show on device manager (only at 45dg position but I couldn't do anything anyway)
    - camera software crashed every time, and said; Camera not found, restart or install.
    In my opinion, after some time, the wire got damaged just by the hinge, although I couldn't see anything broken.
    If you have the same issue and you are used to open the laptop then don't look on SW issues... just change the cable. If you are not sure then just buy an external web cam. it wont solve the problem but it would be much easier.
    I hope it helps someone as other posts helped me. Good luck

  • Satellite L300-215 - Webcam not working

    The webcam on my Satellite L300-215 has not worked since I downloaded the new Toshiba software months ago.
    The Chicony webcam is not even recognised and it will not install the Toshiba software.
    Two hours with Toshiba technical staff, including them having remote access to my computer, did not solve the problem.
    It seems this is a very common problem and I have tried some of the suggestions on postings but with no result.
    Does anybody out there have the answer?

    I have two Toshiba notebooks, Satellite P200D and Satellite A300, both with webcam and everything works well. So I don't agree with statement about very common problem.
    Does webcam works well if your notebook is preinstalled with Toshiba recovery image (factory settings)?
    >I have tried some of the suggestions on postings but with no result.
    What you have tried to solve this?

  • Satellite C850-1G3 touchpad stoped working - keyboard very flexing

    I purchased a new C850-1G3. Touchpad doesn't work well, sometime stop to working (also during Win8 first installation). The keyboard has bad feeling: very very flexing (like netbook of some year ago).
    Feels cheap.
    What do you think about? Touchpad stop working is normal?
    Thnks

    >Feels cheap.
    The Satellite C850-1G3 is a cheap notebook. You can get it for about 370 Euros.
    >Touchpad stop working is normal?
    Even if the notebook is cheap, the touchpad should work properly.
    But what do you mean exactly by stopped working?
    Can you enable or disable the touchpad by pressing Fn + F5 (or just F5)??
    Did you try to modify the touchpad settings? (can be found in control panel -> mouse -> last tab pointing device -> settings)

  • Satellite A300-1G5: webcam stopped working - Webcam driver open fail

    Hi
    my laptop specifcation here : ( [A300 - 1G5|http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new=Yes&PRODUCT_ID=1055589] ) for any needed details ..
    The problem simply is, the webcam stopped working for some reason, an error messeage says "Webcam driver open fail. Please restart camera or computer".
    I noticed that whenever I put the computer in sleep mode I was getting on the icon tray a notification says "USB device unrecognized"... I wasnt aware what it was - thought it becasue of the USB mouse being plugged... but I think its related to the camera...
    software is installed but camera is not working and cant enable it .. I did download the latest driver from toshiba site , but still not working ...
    Currently my laptop runs Vista HP SP2 32-bit, Windows defender enabled, Windows Firewall Enabled, Windows UAC enabled, Kaspersky Ani-Virus 2009 Enabled. I only use Windows Live Messenger (which up to date I think , version : 14.0.8089.726) which i used camera with, I quite using face recognition long time ago and rarely use the webcam ... I didnt install or update any drivers and used to have the laptop running perfectly..
    So what happened now ?!

    Hi
    I have had a similar error message and could solve this by disabling the webcam software from startup.
    In msconfig -> Start Up tab I have unchecked the Chicony webcam software.
    This prevents it from automatic loading.
    I dont use MSN but Skype and the Chicony webcam software is always disabled (not executed) if Skype is running.
    Maybe you should try this too.
    Furthermore you could try this:
    Go to device manager, mark the webcam (imaging devices USB video device) and deleted it from the device list.
    Then reboot the notebook and wait until the webcam has been recognized again.
    Then test it.

  • My webcam doesnt work

    I have E531 lenovo thinkopad.
    My cam seems to be on when i check settings..
    but it doesnt work on skyppe ?

    Hi SnowWolfX,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with camera on your ThinPad E531.
    Have you check if the driver is installed properly from device manager, if installed check if it is enabled from setting.
    Press Windows + C to enter the charms bar and go to PC setting select privacy and go to Web-camera option and check if it switches ON.
    Check with this option and let us know the findings.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Satellite A210 - Built in webcam doesnt work

    After i reinstall my notebook (Satellite A210) with the factory DVD, my webcam get this error... "Webcam driver open fail. Please restart camera or computer".
    What can be wrong? I have this notebook only 1 month and I bought it as brand new notebook.

    It is very stupid situation. I have A200 with web cam and when OS installation is finished starts one small wizard and check if webcam is there or not. Hardware is recognised and all necessary drivers will be installed. After restart everything works well.
    I presume the same should happen when you try to install your A210. Am I right? Try with recovery installation again. Maybe next time everything will be ok.

  • HP G56 with Webcam doesnt work?

    i have the g56 with a camera, ive used it to take pictures and go on video and what not and all of a sudden it says it cant find it? Help please!

    Hello Mikeymans13,
    I see that you are having problems with your webcam, is that correct?
    I would like to help but I need some more information from you. What is the full model name and product number of the computer? Here is a link showing how to find it.
    Here is a link  to some troubleshooting steps for webcams on Windows 7 units
    If you have a different operating system let me know.
    Let me know if this works or if you have more questions.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Ezonics webcam doesnt work

    I have ezonics Model P1-UC / Part 5302-0034 webcam it does not work. I tried iChatUSBCam software and SN9C102 WebCam Driver and maccam 0.9 software but no use.

    I have ezonics Model P1-UC / Part 5302-0034 webcam it
    does not work. I tried iChatUSBCam software and
    SN9C102 WebCam Driver and maccam 0.9 software but no
    use.
    Then there may be no way to use it. Do you have a url reference for that particular product.

  • Recording sound on my built in webcam doesnt work

    I recently just got my hardrive upated and then i had to reinstall my camera assistant software. The first time i installed it the when i recording something it would have no sound. Then i uninstalled it and installed it a second time, now when i record the sound is all blurry and is coming out of one speaker only. I really need this to work cause i have to record my music, please help me!

    Hi,
    Please try this:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&lc=en&cc=us&dlc=en
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My logitech webcam doesnt work

    i have downloaded the drivers for my webcam it recognises that its there but the web cam isnt on i have purchased 2 and both have same problem. Is ther anything i need to switch on or correct on my settings

    Bruce, welcome to the forum.
    When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.  Also, what is the model of the webcam.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Webcam doesnt work properly with Face Recognition tool

    Hey guys, when I open my 'face recognition' tab and click register, that blue light will flash on and off all day, and never register/recognize me. Whats the deal?
    Am I doing something wrong? If you need any more information let me know, and I'll gladly provide it.
    By the way, the cam works fine, I use it on Skype all the time.
    Thanks!

    Hi
    Maybe you did something wrong while face tool registration:
    Check this thread about face recognition
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35965
    Start Toshiba Face recognition tool
    Click on Register Face and follow the menu on the screen and register new account
    Enter Settings and enable the option Automatic title selection. You can also choose first option in Authentication mode
    Restart your notebook
    When notebook restarts click on Switch user
    Choose Start Face recognition
    Here is another thread which provides the detailed instruction how to use this software:
    http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=147434
    check both!!!

  • Satellite M-30: Infrared doesnt work properly

    Hi,
    I have a Satellite SM-30. I am able to receive files from other computers (through infrared transfering) but when I try to send files it says "WIRELESS CONNECTION ERROR. NON VALID DATA WHEN TRYING TO TRANSFER THE FILE." Both computers recognize each other, but I can't send any file. The other computer has an older Window OS. (dont know if that has something to do with the problem)

    Hello
    If you want to send some files like pictures, different documents or even mp3 files there should not be any problem. This error is unknown to me too. If you send files be sure that there is no objects between the units that can disturb the data transfer.
    Like Barrie said it is possible that file is maybe in usage and can not be removed from the HDD.

  • Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

    My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

    Hi
    The webcam is listed in device manager under the Imaging devices
    There you should see USB Video Device.
    If its not listed there, then I think that the device malfunctions or its disconnected.
    The webcam is an usb device and its connected to USB controller.
    I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
    I such case the display lid needs to be disassembled and the cables should be checked.
    In my opinion its a job for an technician.

  • Compaq Presario Cq 60 116-ee Os-Xp Built In Webcam Mic doesnt work,,Please Help

    Hi
    I have a Compaq Presario Cq 60 116-ee Os-Xp
    the mic on the webcam doesnt work
    can anyone help me with the driver
    I would appreciate the help
    Ciao

    How did you install xorg? What is your hardware? (lspci -vv) Please provide details.

Maybe you are looking for