Satellite C870-196 - Long launch after BIOS update

Hello
I went to u BIOS 6.00 to 6.70 and I have a very long black screen between the TOSHIBA logo and the launch of my session I had not before!
I delivered the default settings in the BIOS (F9) as shown.
Where can this come and what to do?
Thank you
Kind regards

Well, new BIOS updates contain always some changes and probably something has been changed in new version and therefore the time between Toshiba logo and appearance of the image is a little bit longer.
What to say its not know to me that you could modify this delay so you will need to accept this BIOS change

Similar Messages

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Satellite L650-1KR PSK1JE - dead after BIOS update

As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
Of course my warranty is already over... :-(
Please help!
Thank you in advance...
lichtimc

Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

Satellite A660 - USB boot problems after BIOS update

Hello,
I own a Toshiba Satellite A660 and recently have update the BIOS to the latest version (1.80). Since then the notebook will freeze on the boot screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
It works without the flash memory connected and also if I connect it after I enter the boot menu or the BIOS setup. I can even boot from it like this.
As far as I am concerned this is a serious regression. Is there any way I can downgrade the BIOS version, or any other way to fix this issue ? I rely heavily on external USB drives.
Regards,
Claudiu.

I too am having problems with my A660 since upgrading to 1.80 bios - the HDD/SD utility, the pc health monitor and half the other toshiba utilities no longer work because they can't recognize the bios and actually tell me this... I get an error message telling me ''can't get bios type''...
On top of this I get the boot problem as well - I have to unplug half of my USB devices to get the laptop to boot properly...
And now - one month into owning my new A660 - after a hard drive failure, a problem with the Broadcom internal wireless adaptor I now have the internal TV tuner no longer working and have no idea how to fix it...
My gut feeling is that the sooner I can downgrade to the original factory bios the BETTER - and wait for another bios update to come along that is not faulty/buggy...
HOPE someone can help me with this...
John.

Standard PCI to PCI bridge no longer working after BIOS update

Hey everyone,
Before I get into the details of what is probably the most frustrating computer problem I have ever faced I would first like to say hello because this is my first post and I give you my system specs.
Windows 7 ultimate x64
GA-M61PME-S2P (rev 1.0) MOBO
2x 120GB Mushkin SSD @3.5gbps Raid 0
AMD Phenom II x4 @2.2 GHZ (Old processor that I replaced)
AMD Phenom II 1090T x6 @ 3.2GHZ (New processor that replaced the Phenom x4)
MSI Cyclone GTX 550 TI OC (Nvidia)
8 Gigs 800mhz DDR2 RAM (Computer Bay)
I have had a GA-M61PME-S2P (rev 1.0) board for several years now and have never had any problems. I recently bought a brand new AMD phenom II x6 1090T processor because it was listed as being supported by my board. The BIOS version that I had installed before purchasing this processor (version F5) was unable to recognize my new processor and boot so I had to update to the latest version (version F7b). After flashing my BIOS with the new version I was able to boot and my computer recognized my processor with the correct name and clock speeds. Unfortunately it now no longer recognizes one of my standard PCI to PCI bridges. Of the two standard PCI to PCI bridges listed in device manager one of them has a yellow exclamation point and reads "error code 35 firmware does not contain enough info to configure this device". I have tried everything I can think of but just cant seem to get my processor and graphics card to work under the same BIOS version. I will now list every step I have taken;
1.) I have re-flashed several times between versions F5 and F7b but always get the same results
2.) I have used Driver cleaner in safe mode to wipe all drivers and then double checked programs and features to make sure nothing was still installed.
3.) I have installed all drivers for the board from Gigabytes website, although when I try to install the VGA driver i get an error saying that no device could be found that supports the driver.
4.) I once again wiped everything in safe mode and then found the latest chipset drivers for nvidia Nforce from NVidia's site but got the same results.
5.) I tried downloading the F7b BIOS from some random website just in case the file from Gigabyte was somehow broken but this did not change anything. (I know that's generally a bad idea but I am desperate)
6.) I uninstalled the problem standard PCI to PCI bridge in device manager and restarted my computer but got the same results.
7.) I tried installing my graphics card drivers from MSI but got an error saying that no supported hardware could be found.
8.) I tried installing a number of different versions of the Nvidia graphics card drivers for my series but kept getting that same error message
9.) I downloaded the Graphics card detector program that NVidia provides on their site but it told me that it could not detect my graphics card.
10.) I tried Flashing my BIOS to the F6 version for the rev 1.3 board but this turned out to be a huge mistake because my computer would no longer post after this and I had to use a FAT32 flash drive and the q-flash utility to bring it back to life.
11.) I checked over and over and over again that my BIOS settings were right and nothing was setup to only use on-board graphics.
12.) I tried downloading a driver that was supposedly for the PCI to PCI bridge but im fairly sure this was just a trojan because the install did not complete and I found tons of fun plugins installed afterwards (I reformatted shortly after this).
13.) I made sure that my new processor was plugged in and that my BIOS was version F7b and then completely wiped my hard drive and re-installed windows 7 ultimate x64 but got the same results.
14.) I made a bootable DOS flash drive and tried updating my Graphics card BIOS but found that I already have the latest version.
What I don't understand is that my graphics card works perfectly with BIOS version F5 and my processor works perfectly with BIOS version F7b but under no circumstance do they both work at the same time. It may be worth noting that with version F7b installed I am still able to use my graphics card ( my Monitor is plugged into it via DVI) It just gives me the error under device manager and I can not install any drivers.
If anyone out there can help me I will be insanely grateful and will refer to you from then on as the master of all things MSI. I'm at my wits end, If you need any further info just ask and I will provide.

Ah ok I was afraid you were going to say that. I will take this to gigabyte then but just so I know, This PCI to PCI bridge problem couldn't have anything to do with my MSI graphics card BIOS somehow not being compatible with the Gigabyte BIOS?
-Thank you!

Satellite A50 doesn't function after BIOS update

Hi All,
I tried flashing my BIOS through windows as recommended on my Laptop Manufacturer (Toshiba) website. I guess the process went wrong as after 2 hours still the message "Do not interrupt" was getting displayed. I had to force power off my PC. Now it is not booting up.
The Laptio is Toshiba SA50-114, Satellite series.Model No - PSA50E
I have tried suggestions in following link
http://askiris.toshiba.com/ToshibaSu...200%2035586212
However, this did not work.
However, I don't have the recovery disk tool and BIOS/ROM file. Have tried searching on internet, but with no results.
Can someone please help me with
1. How can I perform the BIOS update to get my PC running back.
2. Point me to links where I can find the files in the above link.
Many Thanks in advance.
Best Regards,
Parag

> 1. How can I perform the BIOS update to get my PC running back.
Not possible if your BIOS ROM module was wrong flashed.
If you are a lucky man then only the ROM module must be flashed again using an special procedure. But this can be done only by an authorized service provider in your country.
> 2. Point me to links where I can find the files in the above link.
There is no link! You will have to ask the ASP for the help.
Bye

K9A Platinum no longer posting after bios update

I recently upgraded my computer to the specs below, and vista ultimate wouldn't start up (In safe mode it would freeze on checkdisk). I tried some of the solutions I found here (unplugging IDEs, etc) to no avail, and finally I decided to flash the BIOS and upgrade it to the most recent version (1.5). It worked once after restart (sor of, it froze on checkdisk again) but on subsiquent boots it no longer posts! Help please, I need my desktop!
Athlon X2 6000+
8 gb (4x2gb) DDR2 800
K9A Platinum
ATI 1800 Crossfire
650 Watt power supply
---

Quote from: Piuro on 16-May-07, 11:25:02
Okay, i'm able to get into vista with four gigs, six gigs causes it to reset at crcdisk.sys, and it seems to boot with 8. It seems that some setting got tripped in the BIOS update, Looks like this was some spirit of spontaneity prevalent in so many computers. Thanks for the help!
you are welcome, next time please do not touch the BIOS when everythink is working fine. and don't update BIOS only because its a new one.. read here: https://forum-en.msi.com/index.php?topic=103441.0
also 1.5 are known as problematic one for most of K9A owners...
"Okay, i'm able to get into vista with four gigs, six gigs causes it to reset at crcdisk.sys, and it seems to boot with 8."
that is normal, issues can be expected when using 3 memory sticks. recommended are 2 memory sticks, other working combination 1 or 4 memory sticks.(but 3 memory sticks are not recommended.)
also its a good idea to check memory for errors with Memtest86, to ensure that they are working correctly without errors.

Satellite C850 - Low fan speed after BIOS update

Hello,
So I have my Satellite C850-PSKCEV bios updated around 6 months ago to version 6.80 (I bought my laptop in 2012), and since then the fan is running at low speeds and will never run full speed as before, and as a consequence the laptop overheats prematurely and very fast, and even when the laptop is not in use but left running it does overheat, also gaming is not even possible as any game that I run (even with the lowest settings) gets a fps drop every 5 seconds and lasts 5-10 seconds which renders even the lightest games unplayable, also I am afraid of the continuous overheat to damage the laptop's internal components.
I did clean the fan and vents from dust and there is not even one particle inside them and yet the fan won't run fast and I can't feel but very slight airflow from the vents as apposed to the strong one before this problem.
Laptop model Toshiba Satellite C850-A811 Part No. PSKCEV-00S00FAR
Intel Core i5 2450m - AMD Radeon Hd 7670m
Windows 8.1 64bit

Hi
Have you tried to change cooling method settings and set it to maximum performance?

Satellite L300 does't run after BIOS update from V2.10 to V2.20

Hi
I just installed BIOS V2.20 over the Bios V2.10 for my Toshi Satellite L300 over Windows XP.
Afterwerwards the Machine starts and shows just the XP starting window and the restart that I have the options save restart or normal restatr.
Nothing runs any more? Even starting from Windows-CD has no effect.
Who can help?

Thanks for you suggestions, but F2 did not help.
I performed the Bios update because on the website of Toshiba, there was written, hat the update increases function of the system.
I just called the update service. They mentioned I should reinstall Win XP, because my Computer starts, but Windows is not starting.

Satellite L855 won't boot after BIOS update

I downloaded the BIOS update and followed the instructions it gave during install, however upon reboot (which the setup initiated) I get a blank screen. The CPU fan intermittently starts and stops. I am thinking that the BIOS update was unsuccessful, how do I resolve this issue?
Thank you,
Neil.

Hello Neil
Generally speaking when BIOS is screwed up you need professional help and you should contact nearest Toshiba service provider and ask for help.
Check also this thread. Maybe this methid can help you too.

Satellite L300D - Won't load after BIOS update

I had to update my bios & it seems that the wrong one was downloaded about 3% into installing the laptop just died & won't go back on.
There are no lights & there is no noise from the laptop at all.
Any ideas on how I can fix this?
The laptop is a Toshiba satelite L300D

Hello
Well, if BIOS update crashed you can do nothing because the ROM module must be reflashed. This can only be done with special tools and only an authorized service provider has such tools.
So please contact nearest Toshiba service and ask for help :)

Satellite A500-136 is dead after BIOS update.

Hello friends...
Today i tried to flash new BIOS, but in 21 of 37 it stuck,
I have waited one hour, but nothink else, just stuck.
No one key is active.
Then i removed my batery, and tried to power up the computer and the screen is black.
Nothink else is not showing there. I think bios is dead..
WHAT I NEED to do,i dont want to get to waranty, becouse i need to wait one month, only then my computer will be fixed.
Please help please please... :(
SORRY FOR MY POOR EANGLISH

Hi
Its pity to hear that mate!
It seems that something went wrong during the BIOS update and therefore the notebook cannot power up.
Im afraid you cannot do anything else as to contact the local ASP!
The local ASP technician should check the unit and possibly he could update the BIOS again using an special BIOS and special procedure.
Good luck buddy

Satellite L455D-S5976 - blue screen after BIOS update

fan wasnt operating properly causing overheat so updated bios,
see here
[http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67086&tstart=0]
and now i am blue screening (it flashes extremely quickly) just as the windows xp screen on booting appears. keeps doing over and over, please help.
*edit,*
incidentally as the bios started updating the fan immediately picked up speed. strange.
Message was edited by: toshibauser_2

So you are not able to access BIOS???
Press F2 immediately (press it many times in the row) after notebook has been power on
But if you are not able to access the BIOS, I assume that there is a serious problem with BIOS/hardware possibly something went wrong during the updatebut usually this should not happen and its sounds strange
However, I think in such case just an ASP technician would help you.

Satellite A110 (PSAB0) running hot after BIOS update

I updated the BIOS on my Satellite A110 (PSAB0) to the latest version and now the laptop runs hot - the fan runs constantly and the battery drains from full to empty in minutes.
Is there a setting or another update to cure this problem or how can I restore the old BIOS?
I am sure I opted to save the old version during the update but I can't find it on my laptop.
Thanks for any help

Have you tried resetting the BIOS to its default settings?
Also try updating the Toshiba Power Saver and Common Modules, and check that the power options are set to dynamic CPU speed to avoid the CPU from running full speed all the time.

Satellite L450 (PSLY0E) - black screen after BIOS update

It seems like I have "bricked" my laptop during a bios utdate gone bad...black screen, as suspected :o /
The laptop is a Toshiba satellite L450 (PSLY0E)
The new bios image is named "bwaa150a.rom"
Anyone knows if it is possible to recover the bios from flashdrive or floppy, using some sort of recovery toolfrom inside the bios chip? ...or something?
Anyone knows who is the manifacturer of this bios?
If I have to rename the bios image during a recovery, what shoult it be named?

Well, I've just brought my bios back to life... :)))
I used the "wincrisis" available from wincrisis.1.0.0.4
Basically I followed the instructions in the download above to create a recovery usb-flash.
Then downloaded the correct bios, renamed the "rom-file" to "BIOS.WPH", and copied it to the usb-flash.
Then I disconnected both the battery and the power connection cable on the bricked laptop.
While pushing down the "F-key" on the keyboard, I reconnected the power cable and powered on with the power button, holding down the "F-key" *all the way till the laptop powered down by itself* after 2-3 minuets.
Then, powered up the laptop normally...voil, running normally, with the newest bios... :)))

Satellite C870-196 - Long launch after BIOS update

Similar Messages

Maybe you are looking for