Satellite Click 2 Pro - Card Reader slot not working with Fedora 21

I am trying to get my Satellite Click 2 Pro P35W-B3220 to recognize the microSD card reader that is on the side of the screen.
I have the other one working just fine.
I'm using Fedora 21 as my OS.

# lspci -k
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
Subsystem: Toshiba America Info Systems Device f960
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
Subsystem: Toshiba America Info Systems Device f960
Kernel modules: i2c_i801
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
Subsystem: Intel Corporation Dual Band Wireless-AC 7260
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Unassigned class [ff00]: Device 1aea:6621
Subsystem: Device f960:1179

Similar Messages

Tecra 9000: SD card reader will not work with XP

I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
David
[Edited by: admin]

Hi David
Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
What you say is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
Of course there are different models with different hardware configuration but all supports WinXP.
I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
As you see you have to pay attention to many important things if you want to install the OS manually.
Have a nice day

SD/SDHC/SDXC/MMC/MS/MS Pro card-reader slot not showing up in windows explorer.

I have a Lenovo IdeaCentre, purchased only four weeks ago. It product family is IdeaCentre k410, machine type 10089. Anyhow, the problem is: I inserted a microSD / microSDHC, both of which seem to fit into the slot fine, though neither registers under anywhere in windows explorer, neither in the root of C://, nor in any of the subdirectories, or on the main listing of mounted file systems. I used the Lenovo Driver Updater and re-installed the SD Card Reader driver, to no avail. Any help would greatly be appreciated. As well, the computer runs Windows 8, which has some features I'm unhappy with, and although this is not a windows forum and I don't mean to create a thread that deviates from lenovo-specific topics, I was wondering if there is anything in either the machine architecture or the software of Windows 8 that could hinder m in installing a dual-boot system so that I might have the option of running a variant of linux as a sub-operating system, as I did with windows XP.????? OK any help at all would be so greatly appreciated, thank in advance. I really want to be able to retrieve some writing files I have stored in that micro SDHC card. As another aside, does anyone know the max limit of RAM this computer can take and if it is DDR or some other type?

hi BrokenHalo,
Welcome to the Lenovo Forums.
Regarding your questions:
1. When you inserted the SD card, do you hear a sound that a device is inserted and under Device Manger, do you see a Card Reader?
If not, try to:
a. boot intto the BIOS by pressing F1, load defaults by pressing F9 then press F10 to save and exit BIOS.
b. Reseat the front panel connectors (see page 23 of the hardware maintenance manual)
2. To install linux (i.e. Ubuntu), see if you can install Ubuntu via UEFI. If you're unable to do so or if you want to install other OS, try to:
a. Boot into the BIOS by pressing F2 and set the following settings below
UEFI Boot Mode = Legacy
Secure Boot = Disabled (if applicable)
CSM = Disabled / Legacy or Other OS (if applicable)
OS Optimized Default = Disabled or Legacy (if applicable)
b. When finished, press F10 to save and exit BIOS then try to install Ubuntu via Wubi or insert your Windows installation disc to install a different OS.
3. As per this pdf data sheet, the Lenovo K410 has a max RAM of 8GB PC3-12800 1600MHz DDR3 but Crucial reports that this unit can take up to 16GB PC3-12800 1600MHz DDR3 - check this site.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

Since updating to OSX Mavericks (10.9) My USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
My USB 2.0 card reader saved my life this time. It works totally fine.
Is this a known problem? Are you guys working on it?

Solved in this post here:
https://discussions.apple.com/message/24016337#24016337

My CAC Card reader is not working with Firefox

Using Win7 64 bit I can log in to secure site with IE 9 using my CAC Card but cannot log in to the same sites using Firefox 24.3 ESR. Is there a setting I need to change?

check to see if this helps you solve your problem
[https://militarycac.com/firefox.htm Firefox - CAC]

Satellite C850-B635 and Win7 - card reader is not working

My notebook came with windows 8 and the card reader was working
but I installed windows 7 64-bit , downloaded all required drivers to my notebook , but the card reader is not working now .
I downloaded a driver called card reader controller but it didn't work as well
I don't know if there is a problem or there is a driver that I should install and I don't know .
please help me solving that problem .
In my windows device manager these devices isn't recognized :
*PCI simple communications controller
*SM Bus Controller
*Unknown Device
I tried to search in my drivers download page in Toshiba website but couldn't find these
please help me making my card reader working again.
Regards
Message was edited by: domaking

To me the case is simple and the reason why the SD card reader does not work is that an compatible driver isnt installed.
My theory seems to be correct since the SM bus controller and PCI simple communications controller appear in the device manager and I guess one of these devices belongs to the SD card reader/controller.
I think you should simply install this Realtek Card Reader Controller which I found on the Toshiba EU driver page
http://support1.toshiba-tro.de/tedd-files2/0/carc-20130924161048.zip
Furthermore you should install all other Win 7 drivers as well as Toshiba tools available for Satellite C850 series.
Very important is the chipset driver, USB 3.0 driver (Win 7 needs this driver to control the USB 3.0 port), display driver. etc
Not very essential tools are Bulletin Board, Online Product information, Reeltime, etc such additional tools dont improved the notebook performance so its up to you if you want to use these software parts

Satellite X200 and Windows7 (32bit) - Card Reader is not working

Hi All,
Hope someone can help.
My X200-219 has recently been upgraded to Windows7 and although it is running well, (better than with Vista for now anyway), the card reader is not working.
Do I need a driver installed??
Looked at various but can't find anything obvious??
Cheers and thanks
DB

Hi
Try please to install THIS driver .
It is Vista 32 bit driver for Digital Media Card Reader. I hope it will work.
Send some feedback.

HELP!!! My Card reader is not working!

My card reader is not working and this is extremely frustrating when trying to transfer data from one device to my my macbook pro. Is there any one out there that can help me with this issue?

Some people (me included) have found the problme to be a stuck contact inside the socket on the MacBook Pro. The far left contact appears to get stuck in the "inserted" position (depressed) and fails to signal to the computer that a new card has been inserted. This contact is partially hidded behind an alignment key molded into the socket. One fix is to carefully (and I mean carefully) use a toothpick to gently prod the contact into its "not-inserted" position (it will pop up and work afterwards). If you aren't comfortable doing this yourself, you can get an inexpensive card reader that connects via USB as a workaround.
If the computer is still under warranty (or you have AppleCare), take it in and let Apple or an AASP fix it for you.

Tun miniport adapters are not working and the camera card reader is not working on a T61P.

The Microsoft tun miniport adapters #4,2, and 3 are not working. They display code 10 error message. Also the USB mass storage device (camera card reader) is not working.
I have tried to uninstall and update the drivers to no avail. I have used ThinkVantage Tool Box. It only lets me know that they are not working. It does say to reinstall them. I have tried. All effort has failed.
All was find until I ran several updates via ThinkVantage.
All suggestions would be appreciated.
Thank you,
Tom

You will not lose data if you back up
Worth doing the basic troubleshooting
Reset
Restore best as new since you have issues ,then you will know if it has started to function correctly ,if not .....
Visit Apple store since if it isn't software probably iPhone is on it's way out

Since I installed lion, my SxS Card reader is not working any more. Some advise?

since I installed lion, my SxS Card reader is not working any more. Some advise?

Try resetting the PRAM https://support.apple.com/kb/HT1379

Installed Photoshop Elements. Card Reader still not working.

Installed Photoshop Elements. Card Reader still not Working.

And what does any of that have to do with Adobe software? You better check your hardware setup and install the proper driver for whatever card reader you use...
Mylenium

SD card reader is not working in my MBP early 2011. Is there any solution?

SD card reader is not working in my MBP early 2011. Is there any solution?

on my macbook iphoto didn't recognise my camera or card reader after upgrading to iphoto '11,
Evenutally I went to an application called Image Capture which I seem to have already. This read the camera contents. I selected the images I wanted and then imported them into iphoto which was one of the options given. It worked. God knows why one has to go through two steps. But I'm feeling pretty triumphant. This may help you if you haven't already sorted it.

Numeric key pad is not working, card reader is not working

Numeric key pad is not working, card reader is not working,

Did you (or someone else) physically open the laptop case?
If you did, then some cables might have gone loose inside.
If you didn't, for the card reader, check if appropriate device drivers are installed in windows device manager.
for the numeric keypad, first tap once on the NUM LOCK key and check.
If this doesn't solve the problem, boot to "Safe mode", and check.

HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
HP Color LaserJet Pro MFP M177fw) is not working with this OS.
Give me a urgent solution

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Adobe reader will not work with games

adobe reader will not work with games

That is correct. Adobe Reader is intended for viewing PDF files, not for playing games. Perhaps you are thinking of Adobe Flash Player?

Satellite Click 2 Pro - Card Reader slot not working with Fedora 21

Similar Messages

Maybe you are looking for