Satellite L 555D-S 7005 reverts in seconds to screen saver when no activity

Out of the blue, laptop started closing working screen and back to start screen in secs if no keyboard activity. Impossible to read entire sentence & must scroll or tap mouse area to retain doc. Wait much longer and must enter password to return to doc again.
I tried resetting times for closing, sleeping, hibernating, everything I could think of and once actually fixed all. But lucky me had the gremlin return not long after. Unable to make correction again. Please, all I know how to do is what I do all the time: on/off, and primarily internet research. This is driving me nuts. Help, help. Thanks.

Satellite L555D-S7005
must enter password to return to doc again.
Maybe we can use that to track down the problem. Let's make some tests.
1. Set up your screen saver for one minute and clear the box On resume, display logon screen, so it won't take you there.
2. Fix resuming from sleep by setting Don't require a password.
See the two attachments.
What do you use for malware protection?
-Jerry
Attachments:
ScreensaverPassword.jpg ‏39 KB
ResumePassword.jpg ‏60 KB

Similar Messages

Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen. Even ending a call is difficult as the screen blanks out within seconds

I have to use the Keypad a lot when making calls. Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out. Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions. Back and forth just trying to enter the options is a pain. Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
If I use the Speaker function the keypad works; the speakler phone is not alway appropriate.
It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle. This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates. It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem.
I'm not sure if it's a hardware or software (design) issue.

It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

Satellite X200-191 = Laptop turns on 4 seconds, black screen,humming sound

_*Satellite x200-191*_
Core2 Duo T7700
*Original:* 1024MB + 1024MB Memory 667MHZ / 512MB VRAM *Replaced:* Kingston Kingston KVR667D2S5/2G (I have this 2x)
*Original:* 200GB + 200GB Harddisk Drive (4200RPM) SATA *Replaced:* Only 1 HDD left, other one I will get back in 2 days.
17 WSXGA+ TRUBRITE TFT Screen
HD DVD-ROM Drive
56K Modem / Lan
W-Lan (802.11 A/G/N)
1/3MPixel Web Camera
Bluetooth
Microsoft Vista Home Premium 32 Bit
_*My Problem:*_
I take out the battery, plug it in the power. Charging light turns on.
I press the power button, power led turns on. Followed by the hdd led turn on, which blinks real quick, stays on for 1 second, then turns of. The power led stays on during all the time.
2 seconds after the power button, a fan starts blowing, while the above mention hdd led blinks for 1 second, 2 seconds after the fan starting to blow, it turns off.
We are now 4 seconds farther, pretty much, everything stopts, except a very tiny minor humming sound. (I just left it on for a couple minutes, sound remains, nothing happens.) (While writing this all I left it on for 10 minutes, the laptop heats op a bit, the adapter gets hotter, but still only the very tiny minor humming sound.)
+So my laptop works for 4 seconds, wont give any screen (black screen) wont load even BIOS. What could be wrong ?+
_*Fixing?:*_
Ok so I left the laptop after a couple of months, being told it was dead, just getting it dusty. (Read history to get this)
But since last week, I figured its getting dusty, I never opened a laptop before, why wont I try doing that.
_+*I replaced the Memory modules, Slot A and B , both memories , same time, one at a time, all possible ways.*+_
_+*Since I have only 1 HDD, I used it in both slots. Looks to no difference. Using NO HDD, I do NOT have the very tiny minor humming sound!!!*+_
I followed a guide [http://www.irisvista.com/tech/] to open my laptop, to see what is inside.
Finding no lose plugs, but did find a certein oil, and some white paste.
Closing the laptop, to try it out, I accidently screwed a couple wrong screws in the laptop, piercing the top cover of my laptop, but no chips were hit during this :P (Yeah, Im a bit to strong, I should have figured using force for a couple of the screws wasnt the best thing I could do, but now i know :p)
*SOOO* My question, while I wait for the extra old HDD (getting it in 2 days). (Probably making no difference)
What could be wrong, more precisly. Should I like try taking out the video card or something ?
Is there something I should do with some soldering?
Any tips/tricks that could work, wether to fix the laptop, or to narrow down the problem , to a small part which i could replace ?
BEST REGARDS
Danny Visser
The Netherlands
_*History:*_
Not sure if this is any important, but just to let you know, if intrested what happend all to the laptop ;)
I bought the laptop at Shape Computers (in the netherlands) Asking this laptop mentioned above, with 2 things changed. I wanted more Memory, and I wanted windows XP. The shop told me this was possible. They bought me the laptop in, they replaced the Memory with the kingston memories. They installed windows XP instead of the Vista. They laptop did work at this very moment. So I bought the working laptop, with 1 year warranty.
With the folders extra given with the laptop, I was able to increase my warranty from 1 to 2 years for free, so I did.
After probably a couple of weeks I noticed that the laptop was getting real hot, after longer usage. But according to the manual this was normal.
I did use the laptop for gaming, but also 2 months for a gaming study. So I did take it several times to school in a backpack.
After not using it for school anymore I reinstalled Windows Vista 32 BIT
At a very point not sure when precisly I noticed that it wouldnt turn on (probably same problem as I have now) but I was really relaxed about it, tried it later, and somehow it did work again. This happend perhaps about 5 times in total.
Knowing something was wrong, I took it back to Shape Computers. They checked it. (Not showing me what they did to it) But they told me I had nothing to worry about.
After about 2 years I actually sold this laptop to my mom. She used it a couple times (she is like realy noob, just about computers in generally, not even knowing if she should double click icons or not) She took it with her a couple times on trips, and they after about 2 years and 2 months ... this problem happend.
My mom knows a guy, and a friend of that guy, works alot with broken laptops, which told me that the problem was the _+motherboard+_.
I decided to take it back to the shop. After a long progress being down there (about 6 to 8 weeks)(Me going to the shop like 15 times). The shop managed to tell me it was the motherboard. That the motherboard couldnt be fixed and that a new one would be way to expensive.
+(I Known at this very point, after getting the motherboard back, that this laptop was not screwed open yet. The screws were still brand new.)+
Funny information(not for me), during this period of about 8 weeks, they actually told me lies like ... I left a message at your voicemail, I DONT HAVE A VOICEMAIL ... sorry for the caps but im still xxxxxx about those lies.
So still believing the shop ... my laptop is gone .... dead ... but then since last week, I started looking into the laptop myself ...(Fixing)

Ok, the company did not reply at all ... I ended up sending another email. And they did reply with a automatic message. Now weeks later still nothing more then that auto reply.
While I was waiting I contacted another guy that knows alot from these laptops. Getting a new part would cost me about 300 euros, and thats just the part, not even replace time.
Considering the toshiba help I have gotten ... (pretty much none) in these last years.
I declare my laptop dead. And decide at this very moment, that I (ofcourse) never will buy toshiba hardware again.
I might pay a bit more at my Dell computers, but the support in the last 8 years with 5 different computer systems and 1 laptop. Has been perfect in compare to the toshiba support I have gotten in the last 3 years, which just fails.
Thx tho all you guys for the replys.
Danny Visser

Only in iTunes when I click next song or close iTunes mid song the sound jitters for a split second. That is when I actively click on a functional button. This does not happen when I let the song end and flow into another song. Any ideas?

I have disabled sound check, crossfade and in quicktime settings in control panel audio is set to 16 bit.
The jitter/stutter is like a blip. If i press next track it will cut the sound from the previous track momentarily then resume from where I stopped it for a split second before proceeeding to the next track.

Outlook provides the keyboard shortcut of Ctrl + < (Last item) and Ctrl + > (Next item) to view the message after we open the email item.
Tony Chen
TechNet Community Support

Problem with User Defined Second Selection Screen

Hi Gurus,
                   I have a problem with the selection screen selections. My requirement is that , User when he selects a check box on the main selection screen ( which is 1000) then at the at-selection event, another screen (whose number is 2000) will be called and it has some parameters to enter values. My problem is that how to get the values from this second screen and use them in the in my program. There is an execute button on the second selection screen and when i click that, nothing is happening.
                   Can anybody suggest me how to get the values from this screen which we called, and entered values in that screen. How to use these values and is there any way that we can do this.
Thanks in advance for helping me out.
Regards,
Srinivas.

Use <b>DYNP_VALUES_READ</b> FM to read the values from your dynpro screen...
Like this...
DATA: ls_dyname     TYPE d020s-prog,
        ls_dynumb     TYPE d020s-dnum.
gt_dynpfields TYPE STANDARD TABLE OF dynpread WITH HEADER LINE.
    ls_dynumb = '0112'.
    gt_dynpfields-fieldname = 'RF05A-NEWKO'.
    APPEND gt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = ls_dyname
      dynumb               = ls_dynumb
    TABLES
      dynpfields           = gt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
Greetings,
Blag.

HT202731 My screen saver keeps reverting to National Geographic at random...I chose iPhotos.

How can I have iPhotos permanently as my screen saver when it randomly reverts to National Geographic?

Screen Saver changes on it’s own
Screen Saver changes on it’s own (2)
Another workaround is to delete the pictures in the National Geographic folder and add your picture there. Hard drive level Library/ScreenSavers.

Satellite X200-245 can i install a second HDD

on satellite X200-245 : can i install a second hard drive ?
is it possible ?
There is a place for it but no sata connection on the mother board where can i find this connector

No you cannot install the second HDD because there is no HDD connector which would allows to connect the HDD to the mobo.
And No, its not possible to upgrade the mobo with such connector.
The X200 has the two HDD bays because some X200 support 2 HDDs and some dont support it.
Your X200 doesnt support 2 HDD

Satellite A200-1S5 - Can I use a second HDD and RAID?

Hi all,
Is Toshiba Satellite A200-1S5 eligible for adding a second hard drive? It has RAID controller as far a I know - could it help?
Thanks,
Denis

The Satellite A200-1S5 does NOT support RAID!!!
But some A200 could use two HDDs (but NOT RAID!!!) There are different A200 models which supports different hardware specifications.
Therefore you can find the second bay at the bottom of the unit.
But if there is no connector for second HDD then this means that there is no second HDD controller and you cannot use second HDD in this A200!!!
Bye

Toshiba Satellite A300-20T shuts down after 5 seconds!!

my laptop satellite A300-20T shuts down after 5 seconds of booting , i dont know why ?? and i searched for support in the website and didn't find it in the model list, also i don't know why ???!!
i want to know why it shuts down , and how can i communicate with support

Yours would not appear to be a US model. We need the Part Number for your laptop, like PSAG8U-05K02C. You can find this on the Toshiba label on the bottom of your laptop. As well, what country was it originally purchased in. In addition, what is your operating system version, like Windows Vista 32bit?
Mike

My iPad keeps reverting to the home screen, both from Safari and Mail. ???

My iPad keeps reverting to the home screen from Safari and Mail. ???

Have you tried closing the two apps completely ? From the home screen (i.e. not with Safari or Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari and Mail apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?

adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

My Ipad (4?) screen went black but I can hear it. I tried hitting both the sstart button and sleep button for 10 seconds and the apple icon comes up, my screen saver shows for 1 second and it returns to black screen again. I can hear SIRI. How do I fix?

I had been using the IPAD and all of a sudden it started talking back to me and when swiping apps to close them they would not close. She (the IPAD) kept talking back to me such as "use three fingers" etc. Then the screen went blank and if I touched it I could get it to beep at various touch points. SIRI would also communicate, but the screen stayed black.
As was suggested here, I tried getting a reboot by holding the sleep key with the home key and after 10 seconds the apple logo shows and 5 seconds later my screen saver comes on for just one second, and then it goes back to a black screen. SIRI tells me shes not available and someone else, must be her sister, says things like 90%, 85%, 80% if I continually swipe the screen. Can anyone help me?

Hello, Juniorjr2.
Thank you for visiting Apple Support Communities.
This sounds like screen curtain may be enabled. Screen curtain is a feature that allows display privacy. To disable screen curtain while VoiceOver is enabled, you can three finger triple tap the screen to disable this feature. You may need to press the home button once in order to process these steps. If you wish to disable VoiceOver, see the link in the article below.
iOS: Configuring accessibility features
http://support.apple.com/kb/HT5018
If the issue persists, try reaching out to us here.
Cheers,
Jason H.

Please help. ive bought a second hand ipod nano, when i connect it to my pc it recognises it as a sigma mass usb device, yet its a 8gb ipod nano,and i tunes does not recognise it, im running on windows vista basic yet my own 80g classic ipod runs perfect

please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.

there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit.

Save As takes over 30 seconds to show Save As dialog.

Every time I click File - Save As it takes over 30 seconds for the Save As dialog window to show up. I am using Adobe Acrobat 9 Pro Version 9.5.2

I am continuing to have this problem. I have saved to a network location that is no loger available. The company has changed the name and IP of the server. So the network location i had previously saved to will never be available again.
I believe the significatnly annoying delay in the appearance of the "Save As" dialog is the result of Acrobat trying to resolve an unavailable network location.
How do I get Acrobat 9 to ignore the saved network location? Do I need to remove this network location from Acrobat 9 cache? If so how do I do this?
Thank you for your help.

Trouble with mobile site. Displays for a second then screen goes black.

Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/

I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
At first:
Two seconds later:
I noticed this on 4/7/12. Does anyone NOT have this problem?
Matt

Satellite L 555D-S 7005 reverts in seconds to screen saver when no activity

Similar Messages

Maybe you are looking for