Satellite L10-104 doesn't start after battery totally empty

Hi,
after I left the laptop over the weekend without the AC charger the battery was totally empty. So I reconnected it to charge the battery for one day.
Now, when I press the power on button the green LED on the front illuminates for approx 3 seconds - nothing else happens. No HDD sounds, no coooling fan noise, nothing on the screen.
Does anyone have some ideas what I could do to make it run again?
Thanks,
Christian

Hi,
I took out the battery for one day, put everything together and tried to start up - nothing.
Then I took out RAM, HDD and some other module that's accessible from underneath and put the power cord in, tried to start - nothing.
I even disassembled the whole notebook and hooked up only the motherboard with the power line (of course CPU, GPU and cooling fan were still attached) - still nothing. Only the green LED in the front lights up for 3 seconds.
My guess is - its time has finally come. However I never expected that after a complete discharge of the battery.
Thanks for your help. I'd appreciate if you have any other ideas and since the notebook is 5 years old I guess I will not take it to a service technician.

Similar Messages

Satellite A205-S4607 doesn't start after windows vista update

Hello,
I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
The model is Satellite A205 -S4607

Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
Message was edited by: Nvillegas

[SOLVED] Xorg doesn't start after upgrade to 1.17.1

Archlinux i686
Intel Core 2 Duo 6600
01:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
After following upgrades:
[2015-02-26 03:27] [PACMAN] Running 'pacman -S mesa mesa-demos mesa-libgl'
[2015-02-26 03:27] [ALPM] transaction started
[2015-02-26 03:28] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.5-1)
[2015-02-26 03:28] [ALPM] upgraded mesa-libgl (10.4.2-1 -> 10.4.5-1)
[2015-02-26 03:28] [ALPM] upgraded mesa-demos (8.2.0-3 -> 8.2.0-4)
[2015-02-26 03:28] [ALPM] transaction completed
[2015-02-26 03:28] [PACMAN] Running 'pacman -S xorg-server xorg-server-common'
[2015-02-26 03:29] [ALPM] transaction started
[2015-02-26 03:29] [ALPM] removed xf86-video-vesa (2.3.2-5)
[2015-02-26 03:29] [ALPM] removed xf86-video-nouveau (1.0.11-2)
[2015-02-26 03:29] [ALPM] removed xf86-video-modesetting (0.9.0-2)
[2015-02-26 03:29] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.17.1-3)
[2015-02-26 03:29] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.17.1-3)
Xorg doesn't start after reboot and I found following kernel message:
kernel: [drm:drm_mmap_locked] *ERROR* Could not find map
and /var/log/Xorg.0.log looks like this:
[ 5.591]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 5.591] X Protocol Version 11, Revision 0
[ 5.591] Build Operating System: Linux 3.18.6-1-ARCH i686
[ 5.591] Current Operating System: Linux emeria7 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
[ 5.591] Kernel command line: root=/dev/disk/by-label/archroot rw
[ 5.591] Build Date: 22 February 2015 12:52:47PM
[ 5.591]
[ 5.592] Current version of pixman: 0.32.6
[ 5.592] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.592] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.592] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 26 14:58:35 2015
[ 5.597] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.598] (==) ServerLayout "ServerLayout0"
[ 5.598] (==) No screen section available. Using defaults.
[ 5.598] (**) |-->Screen "Default Screen Section" (0)
[ 5.598] (**) | |-->Monitor "<default monitor>"
[ 5.599] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 5.599] (**) | |-->Device "Device0"
[ 5.599] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.599] (**) Option "BlankTime" "0"
[ 5.599] (**) Option "StandbyTime" "0"
[ 5.599] (**) Option "SuspendTime" "0"
[ 5.599] (**) Option "OffTime" "0"
[ 5.599] (==) Automatically adding devices
[ 5.599] (==) Automatically enabling devices
[ 5.599] (==) Automatically adding GPU devices
[ 5.608] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 5.608] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.608] (**) Extension "Composite" is disabled
[ 5.608] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.608] (II) Loader magic: 0x829e700
[ 5.608] (II) Module ABI versions:
[ 5.608] X.Org ANSI C Emulation: 0.4
[ 5.608] X.Org Video Driver: 19.0
[ 5.608] X.Org XInput driver : 21.0
[ 5.608] X.Org Server Extension : 9.0
[ 5.611] (EE) systemd-logind: failed to get session: PID 995 does not belong to any known session
[ 5.611] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.612] (--) PCI:*(0:1:0:0) 10de:0291:107d:2a62 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[ 5.612] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5.613] (II) LoadModule: "glx"
[ 5.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.632] (II) Module glx: vendor="X.Org Foundation"
[ 5.632] compiled for 1.17.1, module version = 1.0.0
[ 5.632] ABI class: X.Org Server Extension, version 9.0
[ 5.632] (==) AIGLX enabled
[ 5.632] (==) Matched nouveau as autoconfigured driver 0
[ 5.632] (==) Matched nv as autoconfigured driver 1
[ 5.632] (==) Matched nouveau as autoconfigured driver 2
[ 5.632] (==) Matched nv as autoconfigured driver 3
[ 5.632] (==) Matched modesetting as autoconfigured driver 4
[ 5.632] (==) Matched fbdev as autoconfigured driver 5
[ 5.632] (==) Matched vesa as autoconfigured driver 6
[ 5.632] (==) Assigned the driver to the xf86ConfigLayout
[ 5.632] (II) LoadModule: "nouveau"
[ 5.632] (WW) Warning, couldn't open module nouveau
[ 5.632] (II) UnloadModule: "nouveau"
[ 5.632] (II) Unloading nouveau
[ 5.632] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 5.633] (II) LoadModule: "nv"
[ 5.633] (WW) Warning, couldn't open module nv
[ 5.633] (II) UnloadModule: "nv"
[ 5.633] (II) Unloading nv
[ 5.633] (EE) Failed to load module "nv" (module does not exist, 0)
[ 5.633] (II) LoadModule: "modesetting"
[ 5.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.634] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.634] compiled for 1.17.1, module version = 1.17.1
[ 5.634] Module class: X.Org Video Driver
[ 5.634] ABI class: X.Org Video Driver, version 19.0
[ 5.634] (II) LoadModule: "fbdev"
[ 5.634] (WW) Warning, couldn't open module fbdev
[ 5.634] (II) UnloadModule: "fbdev"
[ 5.634] (II) Unloading fbdev
[ 5.634] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.634] (II) LoadModule: "vesa"
[ 5.634] (WW) Warning, couldn't open module vesa
[ 5.634] (II) UnloadModule: "vesa"
[ 5.634] (II) Unloading vesa
[ 5.634] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5.634] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.634] (++) using VT number 7
[ 5.635] (II) modeset(0): using drv /dev/dri/card0
[ 5.635] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.636] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5.636] (==) modeset(0): RGB weight 888
[ 5.636] (==) modeset(0): Default visual is TrueColor
[ 5.636] (II) Loading sub module "glamoregl"
[ 5.636] (II) LoadModule: "glamoregl"
[ 5.636] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.647] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.647] compiled for 1.17.1, module version = 1.0.0
[ 5.647] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.647] (II) glamor: OpenGL accelerated X.org driver based.
[ 5.772] (II) glamor: EGL version 1.4 (DRI2):
[ 5.786] (II) modeset(0): glamor initialized
[ 5.786] (II) Loading sub module "dri2"
[ 5.786] (II) LoadModule: "dri2"
[ 5.786] (II) Module "dri2" already built-in
[ 5.843] (II) modeset(0): Output DVI-0 has no monitor section
[ 5.896] (II) modeset(0): Output DVI-1 has no monitor section
[ 5.950] (II) modeset(0): Output TV-0 has no monitor section
[ 6.006] (II) modeset(0): EDID for output DVI-0
[ 6.006] (II) modeset(0): Manufacturer: SAM Model: 76f Serial#: 1110590261
[ 6.006] (II) modeset(0): Year: 2011 Week: 8
[ 6.006] (II) modeset(0): EDID Version: 1.3
[ 6.006] (II) modeset(0): Digital Display Input
[ 6.006] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 6.006] (II) modeset(0): Gamma: 2.20
[ 6.006] (II) modeset(0): DPMS capabilities: Off
[ 6.006] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 6.006] (II) modeset(0): First detailed timing is preferred mode
[ 6.006] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 6.006] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 6.006] (II) modeset(0): Supported established timings:
[ 6.006] (II) modeset(0): 720x400@70Hz
[ 6.006] (II) modeset(0): 640x480@60Hz
[ 6.006] (II) modeset(0): 640x480@67Hz
[ 6.006] (II) modeset(0): 640x480@72Hz
[ 6.006] (II) modeset(0): 640x480@75Hz
[ 6.006] (II) modeset(0): 800x600@56Hz
[ 6.006] (II) modeset(0): 800x600@60Hz
[ 6.006] (II) modeset(0): 800x600@72Hz
[ 6.006] (II) modeset(0): 800x600@75Hz
[ 6.006] (II) modeset(0): 832x624@75Hz
[ 6.006] (II) modeset(0): 1024x768@60Hz
[ 6.006] (II) modeset(0): 1024x768@70Hz
[ 6.006] (II) modeset(0): 1024x768@75Hz
[ 6.006] (II) modeset(0): 1280x1024@75Hz
[ 6.006] (II) modeset(0): 1152x864@75Hz
[ 6.006] (II) modeset(0): Manufacturer's mask: 0
[ 6.006] (II) modeset(0): Supported standard timings:
[ 6.006] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 6.006] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 6.006] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 6.006] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 6.006] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 6.006] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 6.007] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 6.007] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
[ 6.007] (II) modeset(0): Monitor name: SMBX2331
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 6.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 6.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 6.007] (II) modeset(0): Number of EDID sections to follow: 1
[ 6.007] (II) modeset(0): EDID (in hex):
[ 6.007] (II) modeset(0): 00ffffffffffff004c2d6f0735433242
[ 6.007] (II) modeset(0): 0815010380331d782aee91a3544c9926
[ 6.007] (II) modeset(0): 0f5054bfef80714f8100814081809500
[ 6.007] (II) modeset(0): 950fa940b300023a801871382d40582c
[ 6.007] (II) modeset(0): 4500fd1e1100001e011d007251d01e20
[ 6.007] (II) modeset(0): 6e285500fd1e1100001e000000fd0032
[ 6.007] (II) modeset(0): 4b1f5111000a202020202020000000fc
[ 6.007] (II) modeset(0): 00534d4258323333310a2020202001ee
[ 6.007] (II) modeset(0): 02031cf14890041f0514131203230907
[ 6.007] (II) modeset(0): 078301000066030c00100080011d80d0
[ 6.007] (II) modeset(0): 721c1620102c2580fd1e1100009e011d
[ 6.007] (II) modeset(0): 8018711c1620582c2500fd1e1100009e
[ 6.007] (II) modeset(0): 011d00bc52d01e20b8285540fd1e1100
[ 6.007] (II) modeset(0): 001e8c0ad090204031200c405500fd1e
[ 6.007] (II) modeset(0): 110000188c0ad08a20e02d10103e9600
[ 6.007] (II) modeset(0): fd1e110000180000000000000000004c
[ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 6.007] (II) modeset(0): Printing probed modes for output DVI-0
[ 6.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 6.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 6.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 6.007] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
[ 6.007] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 6.007] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 6.007] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 6.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 6.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.008] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 6.008] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 6.008] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 6.008] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 6.008] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 6.008] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 6.063] (II) modeset(0): EDID for output DVI-1
[ 6.116] (II) modeset(0): EDID for output TV-0
[ 6.116] (II) modeset(0): Output DVI-0 connected
[ 6.116] (II) modeset(0): Output DVI-1 disconnected
[ 6.116] (II) modeset(0): Output TV-0 disconnected
[ 6.116] (II) modeset(0): Using exact sizes for initial modes
[ 6.116] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
[ 6.116] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.116] (==) modeset(0): DPI set to (96, 96)
[ 6.116] (II) Loading sub module "fb"
[ 6.116] (II) LoadModule: "fb"
[ 6.117] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.118] (II) Module fb: vendor="X.Org Foundation"
[ 6.118] compiled for 1.17.1, module version = 1.0.0
[ 6.118] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.118] (==) Depth 24 pixmap format is 32 bpp
[ 6.462] (==) modeset(0): Backing store disabled
[ 6.462] (==) modeset(0): Silken mouse enabled
[ 6.464] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.535] (==) modeset(0): DPMS enabled
[ 6.535] (WW) modeset(0): Option "EXANoComposite" is not used
[ 6.535] (II) modeset(0): [DRI2] Setup complete
[ 6.535] (II) modeset(0): [DRI2] DRI driver: nouveau
[ 6.535] (II) modeset(0): [DRI2] VDPAU driver: nouveau
[ 6.535] (--) RandR disabled
[ 6.551] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.551] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.551] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.551] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.551] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.551] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.551] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 6.551] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 6.551] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.552] (II) AIGLX: Loaded and initialized nouveau
[ 6.552] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.559] (II) modeset(0): Setting screen physical size to 507 x 285
[ 6.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 6.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.741] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.741] (II) LoadModule: "evdev"
[ 6.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.744] (II) Module evdev: vendor="X.Org Foundation"
[ 6.744] compiled for 1.16.2, module version = 2.9.1
[ 6.744] Module class: X.Org XInput Driver
[ 6.744] ABI class: X.Org XInput driver, version 21.0
[ 6.744] (II) Using input driver 'evdev' for 'Power Button'
[ 6.744] (**) Power Button: always reports core events
[ 6.744] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 6.744] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.744] (--) evdev: Power Button: Found keys
[ 6.744] (II) evdev: Power Button: Configuring as keyboard
[ 6.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.744] (**) Option "xkb_rules" "evdev"
[ 6.744] (**) Option "xkb_model" "pc104"
[ 6.744] (**) Option "xkb_layout" "us"
[ 6.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.780] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.780] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.780] (II) Using input driver 'evdev' for 'Power Button'
[ 6.780] (**) Power Button: always reports core events
[ 6.780] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.780] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.780] (--) evdev: Power Button: Found keys
[ 6.780] (II) evdev: Power Button: Configuring as keyboard
[ 6.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 6.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 6.780] (**) Option "xkb_rules" "evdev"
[ 6.780] (**) Option "xkb_model" "pc104"
[ 6.780] (**) Option "xkb_layout" "us"
[ 6.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.781] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 6.781] (II) No input driver specified, ignoring this device.
[ 6.781] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event7)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.784] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 6.784] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:046D:C050.0001/input/input1/event1"
[ 6.784] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 6.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 6.785] (II) No input driver specified, ignoring this device.
[ 6.785] (II) This device may have been added with another device file.
[ 6.785] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.785] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 6.785] (**) Option "xkb_rules" "evdev"
[ 6.785] (**) Option "xkb_model" "pc104"
[ 6.785] (**) Option "xkb_layout" "us"
[ 6.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.803] (EE)
[ 6.803] (EE) Backtrace:
[ 6.803] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x132) [0x81df9e2]
[ 6.804] (EE) 1: ? (?+0x132) [0xb7787cc5]
[ 6.804] (EE) 2: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x4cd7) [0xb6e2a1c7]
[ 6.806] (EE) 3: /usr/lib/xorg-server/Xorg (xf86_show_cursors+0x688) [0x80f9008]
[ 6.806] (EE) 4: /usr/lib/xorg-server/Xorg (xf86DestroyCursorInfoRec+0xcf8) [0x8103fc8]
[ 6.806] (EE) 5: /usr/lib/xorg-server/Xorg (RamDacHandleColormaps+0x67b) [0x810218b]
[ 6.807] (EE) 6: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x25d) [0x81c648d]
[ 6.808] (EE) 7: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x4c1) [0x81c6b31]
[ 6.808] (EE) 8: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4199) [0x8114399]
[ 6.809] (EE) 9: /usr/lib/xorg-server/Xorg (PanoramiXRenderReset+0x72a) [0x815915a]
[ 6.810] (EE) 10: /usr/lib/xorg-server/Xorg (ConfineToShape+0x9f1) [0x80843b1]
[ 6.810] (EE) 11: /usr/lib/xorg-server/Xorg (WindowHasNewCursor+0x3b) [0x8084f2b]
[ 6.810] (EE) 12: /usr/lib/xorg-server/Xorg (ChangeWindowAttributes+0xb7c) [0x80aa9ec]
[ 6.811] (EE) 13: /usr/lib/xorg-server/Xorg (ProcBadRequest+0x209) [0x8074a49]
[ 6.811] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x3a6) [0x807abf6]
[ 6.811] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x42f) [0x807edaf]
[ 6.811] (EE) 16: /usr/lib/xorg-server/Xorg (miPolyFillRect+0x27f) [0x8068ddf]
[ 6.814] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb72d864e]
[ 6.814] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x21) [0x8068bd9]
[ 6.814] (EE)
[ 6.814] (EE) Segmentation fault at address 0x0
[ 6.814] (EE)
Fatal server error:
[ 6.814] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 6.814] (EE)
[ 6.814] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 6.814] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 6.814] (EE)
[ 6.815] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 6.817] (EE) Server terminated with error (1). Closing log file.
Note the segfault in modesetting_drv.so!
Any help?
I tried to reinstall dependencies of xorg-server and mesa. And then I even went through with the whole system update which I postponed for a few weeks because of the KDE changes. Sadly even the whole system update didn't help.
Is it possible that any old config files can cause this?
EDIT:
I tried kernel parameter "nouveau.modeset=0" but it didn't help.
Last edited by cro (2015-02-26 16:33:19)

Ok, I guess I solved it by reinstalling xf86-video-nouveau.
Funny business! Why did the upgrade to xorg-server 1.17.1 force me to remove it when it is still needed??
And why does that lead to mysterious error messages and segfault??
I discovered it accidentally when I stumbled upon the fact that the package was still installed on my newer x86-64 Arch installation despite being on xorg-server 1.17.1.

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

FF doesn't start after update to version 27.0.1

FF doesn't start after update to version 27.0.1
Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

Teamviewer doesn't start after resume from hibernation

Teamviewer doesn't start after resume from hibernation, what can I do to make it work?
I issued command "teamviewer --daemon start" but no success.

Quote from: BOSSKILLER on 07-July-08, 00:03:29
That's probably BIOS bug, have a ask MSI here: http://ocss.msi.com.tw/ They can send you a new BIOS to try.
I supposed that this issue is caused by BIOS bug, and this speculation was confirmed. MSI Support has sent to me link with BIOS version 132, which solves the problem
Under this link you can find this BIOS: http://rapidshare.com/files/127845890/a7395ims.132.zip.html
Regards.

The browser doesn't start after turning off and turning on the computer

The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
* check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
thank you

My macbook air doesn't start after being for 2 months off, My macbook air doesn't start after being for 2 months oof

My macbook air doesn't start after being for 2 months off? What can i do?

Plug it in and leave it on the charger for about 5 minutes then try to turn it on. If that doesnt work, contact apple and have it sent out for repair or take it to your local apple store. they will probably cover it for free if no physical damage has been done.

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Satellite A100 - Windows and BIOS doesn't start after BIOS update

Hello, I have updatet BIOS of my notebook sattelite A100.
After updating I cannot start my notebook and BIOS doesn't start.

Hey guys... I tried to update my girlfriend's BIOS on a A100 just now (the windows installer) and the procedure stoped in the middle because windows crashed while doing. Now the laptop won't start at all (obviously). I have a black screen when turning it on. No boot sounds or anything. I've already removed the AC power source and battery in case that works. I guess removing the BIOS battery won't help either since the flashing was wrong... In case that doesn't work, is there any chance i could find a BIOS from ebay or somewhere else?
Thx in advance, Jimmy..
PS. My gf is going to shoot my brains out :P

Satellite L10-119 doesn't boot up

I have an issue with Satellite L10-119 model. I'm running WinXP SP2 Home. After a HDD failure, I got my notebook cleaned, replaced cooling and replaced a new "old" HDD. I also updated the BIOS (running ver. 3.00) The thing is, it doesn't want to boot up, or it boots randomly. It doesn't matter if I try to boot from HDD, CD or LAN. It's getting better only when I clear CMOS - then it boots up a couple of times. The computer starts, (I can get into BIOS) and next screen is black with blinking cursor at top left, no reaction. No POST codes, no error messages. Can someon please give me a hand? I'm out of my ideas...

Try these steps: To RESOLVE BLACK SCREEN
When the computer is turned on a boot menu appears showing several boot options to select. Regardless of which boot option is selected, the monitor then displays a black or blank screen with only a blinking cursor in the left top corner of the screen.
1. Remove any CDs, DVDs or memory cards from the computer.
2. Disconnect all devices from the computer leaving only the original mouse, monitor and keyboard and power cord connected.
3. Restart the computer.
4. Press the F1 key repeatedly during the first startup screen until the entering setup message appears. (Press the F10 key to open the BIOS Setup Utility if computer was manufactured in 2009 or later.)
5. The BIOS Setup Utility screen opens.
6. Press the F5 key to restore the default settings. Use the arrow keys to select YES and press ENTER .
7. Press the F10 key to save the changes and exit. Use the arrow keys to select YES and press ENTER . The PC restarts.
8. When the system restarts select Last Known Good Configuration from the boot menu.
The PC should now startup normally. If the blank screen persists continue with the following steps.
9. Select Safe Mode from the Windows Advanced Options Menu .
10. Use Microsoft's System Restore feature to restore your computer to an earlier time to correct the issue.
-Kenna
"Knowledge should be unrestricted and the most important commodity we can offer to help one another."

Xorg doesn't start after update

After updating this day (my system was last updated at the beginning of July
this year) I have some problem with Xorg. The server just doesn't start, and
the screen is black. I can get back to the console with Alt-F1.
Here's my Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux Data 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 18:54:03 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "LCD Display"
(**) | |-->Device "SiS"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 31 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0900 card 1043,1455 rev 82 class 02,00,00 hdr 00
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:01:6: chip 1039,7013 card 1043,1456 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1180,0476 card 1000,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 1180,0476 card 1800,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 01:00:0: chip 1039,6300 card 1043,1452 rev 31 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd1800000 - 0xd1ffffff (0x800000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7efffff (0xff00000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x24000000 - 0x27ffffff (0x4000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20000000 - 0x23ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[1] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x2c000000 - 0x2fffffff (0x4000000) MX[b]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x28000000 - 0x2bffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd8000000/27, 0xd1800000/17, I/O @ 0xa800/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd4000000 from 0xd7ffffff to 0xd3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[7] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[8] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[9] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[18] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.9.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
Backtrace:
And here's what the server writes out:
Backtrace:
Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: \
Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
waiting for X server to begin accepting connections
giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error.
Any ideas? Because I have no idea, what is happening.
Edit (08.08.2008): All right, don't bother answering this question anymore. The problem is no longer important. This topic can be closed, since it won't be solved.
(I think it was caused by some error during copying files while updating my system.)
Last edited by TPJ (2008-08-08 08:42:13)

sand_man wrote:Is /tmp full?
Damn you're right. The pacman cache filled the disk...
Problem solved - thanks!
Only question left is:What are the correct permissions for /tmp since I'd like to set them back to default.
Last edited by Isildur (2009-08-16 14:22:23)

Windows 8.1 doesn't start after update. BLACK SCREEN AFTER LOGIN

Before all, sorry my english, I'm brazilian and don't found the solution on the brazilian version of HP website.
After I did the updates, the system ask to restart the notebook, so I did it. And now, when I do the login, after the password page, the Windows doesn't starts. Just a Black Screen appears.
I can't open the right side window to acces the configurations, and this laptop doesn't have a battery to take out and put in again.
I had already restore the system.
So, I use my laptop to work, and it has only 4 days of use.
I need help! Thanks!

Hi,
Run through the following procedure.
Boot the computer normally and log-in.
At the black screen, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on File and select Run new task.
Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
Type in the following command ( including spaces ) and hit enter.
Dism /Online /Cleanup-Image /RestoreHealth
This will take a while to complete, but when it’s finished, restart the notebook.
If the screen is still black after you log-in, once again, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on File and select Run new task.
Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
Type in the following command ( there's a space between sfc and the / ) and hit enter.
Sfc /scannow
When the scan has finished, check that the result is ‘No integrity violations’, then type exit and hit enter.
Restart the notebook again.
Any change?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Satellite M35X-S349 doesn't start up

My laptop satellite M35X doesn't start up. I press the power button. Then the hard disk green light binks once. The fan or hard disk makes a sound for a couple second. Nothing is displayed in the screen.
Nothing happens after that. I've tried to boot from a CD, but the hot keys doesn't work (press power button, then "C").

Hi Sergio,
From your description of the problem I would suggest that you have a hardware problem on your notebook. The initial POST is failing when it checks your peripheral devices and this is preventing the BIOS from loading correctly. I would suggest you try to remove/reinstall the RAM modules, the Hdd and The Optical Drive. If the fault still persists then you will need to refer to a Toshiba authorised Service Partner for further diagnostics.
regards,

Mac OS X 10.4.8 doesn't start after upgrade to 10.4.10

Hi everybody!
I've upgraded my Mac OS X 10.4.8 to 10.4.10 and after restart it doesn't start anymore I also have BootCamp installed and Windows boots now even if I choose to start Mac OS. I've tried boot it in safe and verbose mode but computer boots Windows instead (
How could I run Mac OS? Maybe it's possible to return to the "before update" state?
Thanks in advance!

To return to the before state you need to boot from your Tiger installer disk. Run Disk Utilities and Repair Disk. Then choose to do an Archive & Install.

Satellite L10-104 doesn't start after battery totally empty

Similar Messages

Maybe you are looking for