Satellite L10 - keyboard doesn't work correctly

Hello
I have problem with my keyboard. I install Windows XP from recovery CD and make updates form Windows Update. Sometimes when I write something ex 1234567890, I see on the screen 123567890 or 123456790.
I took the laptop to the service and they said everything is OK, but for me it`s not!!
What is wrong with it, can someone tell me ??
Thanks

Just small update: I have also heard when MSN search bar is installed the CPU activity goes permanently up and down between 2 and 20 % and if you pres the keyboard key in this moment when the CPU activity goes to higher percent it can happen that the key will not be displayed.
As I said it should be fixed with new BIOS.
Bye and good luck!

Similar Messages

Satellite A60: keyboard doesn't work, recovery DVD can't run

Hello,
I have a serious problem with my A60: the keyboard doesn't work any more. I have tried a lot of solutions and the last one, recovery with the Product Recovery DVD-ROM doesn't work, because I can't use the keyboard!!
When the screen with the 3 choices appears, I have no possibility to answer!!
Have somebody an idea???
Thanks a lot for your answer.

They keyboard might not be the problem or it might not be connected properly to the motherboard the best thing to do is take it to a service centre it shouldn't cost you anything, if it is still under warranty...but if it is just the keyboard and your laptop is out of warranty then it should cost you more than 100-200....can't say how much exactly because I have no idea.

One button of the keyboard doesn't work correctly

Hi there,
I have a problem with my keyboard:
One button of the keyboard doesn??t work correctly: I want to write down a vowel with an accent (like in French and Spanish?), but if I press the button ´ and then the vowel, TWO dashes (´´) and the vowel appear: ´´i. Normally, there would automatically be an accent on top of the i.
I have already tried a different keyboard, but it??s the same problem when I connect it to my notebook. I have also tried to choose a different language like French and Spanish, where they have those accents, but it still doesn??t work.
It would be great if somebody could help me.
Thanks a lot,
Hanna

Hi Hannah,
You do not say which options you have changed to try using a different language, but there are several options which do slightly different things.
If you go into Control Panel and select "Regional and Language Options", a new window opens with 3 tabs across the top. Choose "Languages" (the middle one), then press the "Details" button. This opens another window which allows you to view and change settings including the current input language and keyboard settings.
Changing some of these settings will not make any difference until you reboot your machine.
I hope this helps, let us know how you get on!
Weezle

Help: BB keyboard doesn't work correctly

Hi all,
I have a problem with my BB curve 8520. Yesterday the keyboard started to do strange things:
when I'm writing text messages it skips some letters
it starts automatically to cancel all I have wrote without I have pushed "del"
sometimes it automatically locks and no one key can remove the lock
I already tried to remove and replace the battery but the problem still remain.
Please tell me if there's a solution.

Sometimes, the OS just get's corrupted...and reloading it clean is then the next step to try...
At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Italian keyboard doesn't work under the gui

I have an italian keyboard on a x86 Solaris 10 installation.
All the patch available using Sun Update applied but the keyboard doesn't work, it still works only as a USA keyboard.
Forcing it as a Italian layout at startup (pressing esc and using the boot utility) make the keyboard work in the consolle with the correct layout but under the gui, after the dtlogin startup, the key doesn't work correctly. Every key is "shifted" of one position, so inserting "root" result in "eiir"
Even applyng the 118966-08 patch as suggested doesn't work.
Obiouvsly I used the gnome panel to set the correct keyboard under gnome but with no result
Both the two type of italian keyboards don't work, the standard one and the 104 "ibm" italian layout.
All this keyboards work fine on the same PC with both WindowsXP and Linux Ubuntu.
Any suggestion to fix this ?

The solution was to reconfigure the X-Server: In a console-window I called kdmconfig and corrected the keyboard settings: it was a US-Keyboard. Nobody knows ... At installation time I configured a german keyboard.
A remaining problem is that my mouse and keyboard are connected via USB and they are frozzen after boot. First when I physicaly detach both and reconnect them they start working in an ordinary manner. I saw a forum entry which talked about BIOS-settings.

TS1277 HI. I have followed all the appropriate steps above and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user

HI.
I am having trouble authorising my Mac Air to my Itunes account. I found a discussion explaining how to go go into 'Terminal', then adding a command. I have followed all those appropriate steps and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user. Can anybody offer any suggestions?? ta

Does the command that you're trying to enter in Terminal begin with the word 'sudo'?
If so, your keyboard is working fine. When you type your password after a sudo command, nothing is echoed to the screen for security reasons (not even the * that are normally registered in other user interfaces). However, the program is registering what you type.
Just type your password and press 'return' and the command will be executed (so long as you type it correctly; if you don't, you'll get an error message).

Game Center doesn't work correctly

Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
I've restored my device several times, but it didn't help.
How to solve it?

I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
Other than waiting for Apple to fix it I don't think there is a solution.

Apple Wireless Keyboard doesn't work in Vista Ultmate?

My Apple Wireless Keyboard doesn't work (not response) on Vista Ultmate but its works properly in Mac OS X 10.5.2...
Should I install the driver in Mac OS first or update the keyboard firmware?
Or install a driver for Windows Vista (I can't find any on web...)
Please kindly help! Thanks a lot.

this problem is fixed, but if anybody has an idea what happened, I would like to know.

I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

What OS X are you running and do you have USB or Wireless input devices...?
For wireless devices, take a look at > Troubleshooting wireless mouse and keyboard issues
USB keyboards and mice generally don't have connection issues, but they and there cords do occasionally go bad.

AddChild doesn't work correctly in 11.9

comparing the two releases listed below, somehow my Flash program doesn't work correctly on the latest version anymore, nothing was changed in my program but after upgrading to the latest Flash Player, it doesn't work properly anymore, specifically, the items I add through the addChild method doesn't appear properly, was there any changes in between these versions that could have affected the addChild behavior? I'm testing with Windows 7 IE debug version and I see no script errors
Released 10/8/2013) Flash Player 11.9.900.117 (156.2 MB)
(Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)

Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code, test url or a test swf so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the bug URL and I'll investigate internally.

IPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords

iPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords. They get to ä̈,ö̈, ü̈ when I write the keyword a second time. Can anybody tell me why. Thank you. Heinz

It apparently does not like non-standard English characters - use A-Z and 0-9 adn you should be OK
report to Apple - iPhoto menu ==> provide iPhoto feedback
LN

After upgrade my iphone 4 to IOS6, sound doesn't work correctly

After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

Translation from CS5 to Cloud doesn't work correct, navi and linked images are broken.

Translation from CS5 to Cloud doesn't work correct, <navi> and linked images are broken.
The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
This implies your site is not properly defined in DW. Go to Site > Manage Sites.
Or simply go to your other installation of DW and export the site definition file from Manage Sites.
Save it to a flash stick or other removable drive. Then import the STE file into your 2nd installation of DW.
Nancy O.

ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card

Problem with XP Pro sp1 install - keyboard doesn't work - MBP

After using bootcamp to repartition the HD and rebooting with an xp pro sp1 cd, the blue windows installer loads and runs fine up to where you need to press the enter button to install windows or F3 to exit. At this point, the keyboard doesn't work at all and I have to push the power button. I also can not load osx or the osx boot disc, but the xp disc still loads fine. Currently working on slipstreaming a w/ sp2 to see if this will fix the problem. Prior to bootcamp, I upgraded osx and my firmware. Anyone else encounter this?

You need to use SP2. There is a reason it's recommended by Apple. If you have a valid XP install disk you can easily slipstream it with SP2, which is perfectly legal and effective, and is a relatively painless process.
http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html
Nick

Satellite L10 - keyboard doesn't work correctly

Similar Messages

Maybe you are looking for