Satellite L100-113 does not start after memory upgrade

Hello.
Our integrator bring to our company memory modules KVR800D2S5, but notebook doesn't start :(
I read manual - this notebook supports 533 PC4200 memory modules.
But SO-DIMM 533MHz will be delivered only in a month...
What memory modules we can install to Toshiba L100-113?
Thank you.

Hi
I think the notebook does not power up due to a faulty or not fully compatible memory module.
Please check this 3rd party memory website:
[Memory for Toshiba Satellite L100-113|http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]
As you can see the Satellite L100-113 memory can be upgraded up to 2GB (2x 1GB) and you have to use the DDR2 533MHz (PC2-4200) 200-PIN SODIMM
Regards

Similar Messages

The Connection Server does not start after an upgrade to BO4.1 SP3

Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
Gerd

Hi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

W520 - nVidia optimus does not work after memory upgrade

Hello,
I have W520 16Gb (4*4Gb) running Windows Server 2008R2. Everything works fine - display sets to Optimus.
I've tried to upgrade the memory to 24Gb (2*4Gb + 2*8Gb). Laptop recognizes memory just fine. Memtest+ does not report any errors. Although Windows does not boot up with Optimus set in BIOS. It stucks on black screen during OS boot.
It starts in safe mode. Nothing particularly interesting in event log. It also starts just fine if I choose to use Discrete Graphics in the BIOS but in that mode it does not support 3 monitors..
Latest drivers, latest BIOS..
Does anybody experience this issue?

Hi dwkor
How about reseating the memory in another order?
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Optimizing-memory-in-W510-which-slots-to-use/t...
Following the picture in the link above
Insert your 8GB stick at Slot 0 (Keyboard Side, top) and Slot 1 (Bottom Side, nearer to the screw hole)
Insert your 4GB stick at Slot 2 (Keyboard Side, bottom) and Slot 3 (Bottom Side)
Keyboard Side (Slot2: 4GB + Slot0: 8GB)
Bottom Side (Slot1: 8GB + Slot3: 4GB)
According to Lenovo, For W510 / W520 systems with 4 memory DIMMs installed, place the largest memory DIMM into DIMM slot 0, place the second largest DIMM in DIMM slot 1, place the third largest DIMM in DIMM Slot 2, and place the fourth DIMM in DIMM Slot 3.
True, tested with Windows Experience Index on my W520 with 8GB DDR3 1333MHz RAM.
Score: 7.5 (Slot 0 + 2, 1 + 3, etc. with random BSODs)
Score: 7.6 (Slot 0 + 1)
Hope this helps!
Happy 2012!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...

Firefox does not start after auto-upgrade

Firefox worked well until it prompted me to restart after auto upgrade to 3.6.4. No window displayed although the process list showed firefox was running. Can not resolve the problem even I uninstall and download/re-install 3.6.4.
Windows version: windows 7 enterprise 64bits
== This happened ==
Every time Firefox opened
== upgraded to 3.6.4 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

Same issue for me. I also tried to uninstall the firefox, then delete the folder in program files and reinstalled 3.6.3, 3.6.4 and 3.6.6 tried all sort of combinations I can..
Now firefox is not opening for me in both normal or safemode... :-((

SAP does not start after Kernel Upgrade

Hi
We were carrying out the Kernel upgrade on our HPUX 11.23 and Oracle, R3 Quality System. From Kernel 196 to Kernel 221
After carrying taking a backup of the current exe folder we have copied the new exe ( after Uncar )
We restarted the system
We then started the Lsnrctl and it started successfully.
After login in as SIDadm and issuing the startsap command it gives the following error message in the startup log
Execute Pre-Startup Commands
(2987) Local: rm -f ms.sapEEQ_SCS01
(2990) Local: ln -s -f /usr/sap/EEQ/SYS/exe/runU/msg_server ms.sapEEQ_SCS01
(2993) Local: rm -f en.sapEEQ_SCS01
(2996) Local: ln -s -f /usr/sap/EEQ/SYS/exe/runU/enserver en.sapEEQ_SCS01
Starting Programs
sh: /usr/sap/EEQ/SYS/exe/runU/sapcontrol: not found.
(3002) Starting: local ms.sapEEQ_SCS01 pf=/usr/sap/EEQ/SYS/profile/EEQ_SCS01_eqc
r3
(3003) Starting: local en.sapEEQ_SCS01 pf=/usr/sap/EEQ/SYS/profile/EEQ_SCS01_eqc
r3
(2976) Waiting for Child Processes to terminate.
(2976) **** 2008/04/17 22:18:28 Child 3002 terminated with Status 150 . ****
(2976) **** 2008/04/17 22:18:28 Child 3003 terminated with Status 150 . ****
(2976) **** No more Child Processes to wait for.
(2976) Parent Shutdown at 2008/04/17 22:18:28
Execute Post-Shutdown Commands
sh: /usr/sap/EEQ/SYS/exe/runU/sapcontrol: not found.
(2976) Exiting with Return-Code 3.
Startup of Instance failed (No more child processes)
After this we have restored the backup....after restart etc...it still gives the same error
Can anyone exeperienced such a problem. Would appricate if you could share on how you resolved the same.
Regards,
Milind Karoor

Hi Milind!
Just make sure that you have uncarred both OS dependent and independent files
And also make sure that you copy to the existing folder of RUN (make sure your folder name is RUN)after taking a backup.
As You copy it asks to overwrite, then you overwrite the existing ones.
By doing this some of the files which will not be present in the new Kernel will be present., sometimes this may be also one of the reason
As i have faced the same problem
Thanks,
KIRAN
Edited by: kiran d on Apr 18, 2008 12:54 PM

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

RAC does not start after trying to move storage

Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node                      Reachable?
node1                                 yes
node2                                 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
node2                                 passed
node1                                 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name                             Status
node2                                 not running
node1                                 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name                             Running
node2                                 no
node1                                 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name     CRS daemon                CSS daemon                EVM daemon
node2         no                        no                        no
node1         yes                       no                        yes
Checking CRS health...
Check: Health of CRS
Node Name                             CRS OK?
node1                                 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.

Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

My iPhone4 does not start after it was out of charge and recharged again?

My iPhone 4 does not start after it was out of charge and recharged again?

Hi Svedjot,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy

16 GB x-Fi Style - does not start after charging

Hi,
4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
Can anyone help me?
Cheers,
Uli

Re: 6 GB x-Fi Style - does not start after charging:Just fyi
I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices!

EXE DOES NOT START AFTER DOWNLOADING

I downloaded lr 4.3 but double clicking it does not open the exe. When I double click older lr downloads they still open normally.Right clicking and open does not work either. What to do?

Windows Vista Home Premium 6.0.6002 SP2 Build 6002, Intel Core 2 Quad
Q9300 2.5GHz. When I double click the download, the arrow starts rotaing
for about 30 seconds and then disappears without any new window opening
Op 17/12/2012 23:55, Jeff A Wright schreef:
>
Re: EXE DOES NOT START AFTER DOWNLOADING
created by Jeff A Wright
<http://forums.adobe.com/people/JeffAWright> in /Downloading,
Installing, Setting Up/ - View the full discussion
<http://forums.adobe.com/message/4928607#4928607

Time Machine does not start after external hard drive is connected

Time Machine does not start after external hard drive is connected

These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine.

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

SLD will not start after I upgraded Netweaver 2004s Portal

SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy

Satellite L100-113 does not start after memory upgrade

Similar Messages

Maybe you are looking for