Satellite L25 stopped turning on yellow battery light just blinks seems like not getting power.
One day it just stopped turning on, seems like the power is not getting to the computer.
The Satellite L25 that just stooped turning on, yellow battery light just blinks> I have tried it without battery, plugged in any which way and nothing???? can anyone help guide.
Try this troubleshooting of Toshiba
https://www.csd.toshiba.com/cgi-bin/tais/support/jsp/serviceTroubleshoot.jsp?orderType=CRU
Similar Messages
-
My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times what else can I try to fix it?
Have you tried unpairing the remote? You do this by pointing your remote at the Apple TV and holding the MENU and Left buttons down together for 6 seconds.
-
When I plug in apple tv the status light just blinks amber and nothing appears on the screen
When I plug in my apple tv (first gen) the status light just blinks amber and nothing appears on the screen. The status light never turns white and won't stops blinking amber. I've tried to over ride this with the remote, resetting it and trying to revert it to the factory settings. Is there a way to wake it up or is it a lost cause?
Welcome to the Apple Community.
The system looks like it's unable to start up, this could be software but more likely hardware, either way unless it will start up there is nothing a user can do to resolve this. -
Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?
Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings -
My Iphone 4s is shut down and not getting power on. Do I have the battery problem ? how can I fix it when my phone is not getting on and how can I contact to the apple ? I need to send it or fix it by myself within a limited time. I am from Mankato, MN.
Please suggest me what should I do?Reset, hold both home and power buttons until the iPhone begins to start, usually takes about 10 seconds. If still nothing, connect to Wall Charger and Reset, this can sometimes take about 20 seconds of hold both buttons while on charger.
-
I have a power PC that makes abunch of noise when plugged in but the power light just blinks when I press it and shows no graphics wht is wrong
Click here for information; if the computer beeps three or fewer times, remove and reinsert the computer's RAM. If it beeps four or more times, it needs to be repaired. If it's a G5, it will ignore RAM modules that aren't part of a matching pair.
(76386) -
I bought ATV 2 about two weeks ago. The setup was easy and I set up my Home Sharing, screensavers, and I was watching Netflix within about 20 minutes. I had a good week of no trouble and enjoyed the device immensely. I updated the software when prompted and continued to watch movies and play music. Then something happened: in the middle of viewing, ATV 2 stopped working, the screen went blank, and the little white light started blinking slowly. When this happens, the ATV manual "troubleshooting" section merely says, "Apple TV is having problems." ***? Strangely, it would come on and act fine for a few moments as if nothing happended (for only a minute or two), then click off again.
I attempted to RESET the device by using the Down/Menu combo -- nothing -- the white light blinks really fast but still no picture on the TV (just the Apple logo); I unplugged it and plugged it back in -- no fix; then, I RESTORED the device and had to re-enter Apple and Netflix account info, passwords, set up shared photo folders, etc. Afterwards, it worked. I watched movies right where I left off and went on with life until a few days ago when I wanted to finish a movie... The movie was going fine - no problems at all - until ATV 2 stopped working again!
So, the remote works [it is paired and sends commands as it should], the HDMI connection to HDTV is fine, the stereo receiver connection is fine (for audio, using an optical cable). But the only thing on the TV is the Apple logo. Resetting ATV 2 doesn't work; and I could restore it again but that seems like a HUGE waste of time, and something I am not prepared to do each time I want to use the device.
What could be the cause? Wireless interferrence, software/update flaws, need for firmware, or malfunctioning hardware? ATV 2 is a $100 paperweight until I get answers.After some sleuthing online, reading a compilation of Q&As here, and visiting the local Apple Store, I think the problem and "solution" may be found in HOW my ATV2 is connected to my stereo. For some reason that I have not figured out, when the RECEIVER either switches from one setting to another, it somehow disrupts the ATV.
The ORDER of how you turn ATV on and off is key. If you start with everything OFF (ATV, HDTV, stereo Receiver), then turn on the receiver, then turn the HDTV, put the TV to the input setting that is connected to the ATV, THEN turn on the ATV by hitting the Play button on the remote.
Note: The ATV light may come on once the HDTV is turned on and put to the correct setting, but you will not see a picture on your TV yet.
You should be up and running on ATV (without having to reset, unplug or restore). Apparently, I was using my universal remote that essentially turned everything (HDTV, Onkyo Receiver and, by extension, the ATV) on at the same time, confusing ATV and causing that evil blinking white light. The ATV connection was lost.
When you are done with ATV, you must put ATV to sleep FIRST... each time. The command is on the main menu, to the far right, at the bottom [Sleep Now]. Once you press Sleep Now, the ATV will go off. THEN you can turn your receiver/HDTV off (or to whatever other setting you want for watching regular tv, music, etc.). I was simply switching my HDTV and Receiver 'away' from ATV when I was done... But I would return to a blinking light and no ATV. The solution above is a work-around that seems to do the trick.
The thing Apple needs to fix is to make the "Sleep Now" command a simple process on the remote so you don't have to back out of everything you were watching to get to the main menu for the Sleep Now command. Or in the next update Apple merely needs to improve ATV2 so it can work no matter what order you open or close it on a HDTV/Stereo.
Note: Other people have suggested that you just hit the select or Menu button to put ATV to sleep, but that did NOT work for me.
I figured this out through trial and error so I hope it works for you too. -
MSI GS70 : Battery Light Indicator Blinking Amber
Hey everyone, my MSI GS70's battery status light started blinking amber a few days ago. It blinks amber whenever the battery is fully charged with or without the adapter plugged-in. The battery is still working, and the blinking amber light goes away when the battery level drops from 100%.
When the battery level is at 99%, and I plug in the adapter, it starts charging the battery. I remember the battery doesn't get charged when it's at this level.
FYI I hardly use my laptop on battery, always using with the adapter plugged-in, so I'm very confused!!
Thanks.try ec reset https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller
-
My blackberry wont turn on, the red light just flashes for about 10 seconds!?
My battery went too low for radio use last night, so i put it on charge when i got home. My charger is broken so it needs to be in a certain position to charge. I charged it throughout the whole night and when i woke up this morning it wont switch on. The red light just comes on for about 10 seconds. I have tried to different chargers one that does work aswel. PLEASE HELP.
maybe the charging port is broken? check inside it and see if it looks any different
-
K8N Neo4 JPW1 Required? No Post, power light just blinks
When I try to turn on my motherboard, it just shuts back down (1/10 sec.) My SilenX powersupply doesn't have a 4 pin 12V aux connector. Just the main 24pin and an 8pin aux. So I'm guessing that's my problem.
So this board won't post without the JPW1 Aux 12V connector?
Plus does anyone know what it's trying to say with a blinking power led?
I've unplugged everything external. Just 1 OCZ memory stick plus the cpu cooling fan.
What other PS's that is working with the K8N Neo4 Platinium?
Thanks for any info.FastEddie: Thanks you for the update. I wasn't sure if it was required, since the manual just says for stable operation.
Tiresmoke: The power supply is a top quality 600W, so with just the MB/CPU/1 stick of memory, no external devices I dought it's overloading. Until I can get power to the Aux connector nothing is for sure.
If people can post what brand/model of power supplies (has the 4 pin 12V connector) that works consistently with the K8N Neo4, that sure would help others.
Thanks, -Joseph- -
Reg :SAP WEBDISPATCHER- disp+work stopped(turned from yellow to ash color)
Hi Experts,
When I started the SAP Instance , disp+work stopped in SAP MMC console.Hence I am not able to login to the SAP system(the error : sapdp00 broken).Database is MaxDB.Before adding DATA Volume,the server was working fine.Since the data area was full , I added a new volume and restarted the SAP server.From then on the error persist!..After starting SAP Instance,I also deleted the contents of dev_disp and dev_w0 file but faced the same error.I also executed the command load_systab for loading the system tables but then also the same error.
While starting SAP Instance I get the message as 'Database not available via R3trans'.
While executing the command R3trans -x or R3Trans -d: I get the following message::
This is R3trans version 6.19 (release 711 - 22.01.09 - 11:27:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
R3trans finished (0012).
Please help to resolve the issue.Hi Siva,
Below are details of trans.log::
4 ETW000 R3trans version 6.19 (release 711 - 22.01.09 - 11:27:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 12.01.2012 - 12:21:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Jan 12 12:21:46 2012 81 0.000081
4 ETW000 [dev trc ,00000] db_con_init called 21 0.000102
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 39 0.000141
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 23 0.000164
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so' ...
4 ETW000 37 0.000201
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so), hdl 0
4 ETW000 3775 0.003976
4 ETW000 [dev trc ,00000] Library '/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so' loaded
4 ETW000 29 0.004005
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so
4 ETW000 25 0.004030
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so' is "710.21", patchlevel (0.21)
4 ETW000 80 0.004110
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so
4 ETW000 23 0.004133
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so
4 ETW000 28 0.004161
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 33 0.004194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=(nil))
4 ETW000 27 0.004221
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.004238
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=7fff64a3e720)
4 ETW000 24 0.004262
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.004279
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.004296
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 34 0.004330
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=2aa9150)
4 ETW000 32 0.004362
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 18 0.004380
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 14 0.004394
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 19 0.004413
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection:
4 ETW000 28 0.004441
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 31 0.004472
4 ETW000 [dev trc ,00000] { DbSlSdbConnect(con_info_p=(nil)) 38 0.004510
4 ETW000 [dev trc ,00000] DBSDBSLIB : version 710.21, patch 0.021 (Make PL 0.21)
4 ETW000 31 0.004541
4 ETW000 [dev trc ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10)
4 ETW000 23 0.004564
4 ETW000 [dev trc ,00000] (0.021) NUMC conversion corrected (note 1288313)
4 ETW000 27 0.004591
4 ETW000 [dev trc ,00000] (0.021) Write the action LOB_GET_LENGTH into ST05 trace (note 1288056)
4 ETW000 25 0.004616
4 ETW000 [dev trc ,00000] (0.021) Default value for max. input variables is 2000 (note 655018)
4 ETW000 25 0.004641
4 ETW000 [dev trc ,00000] (0.021) Profile parameter to define max. input variables (note 655018)
4 ETW000 25 0.004666
4 ETW000 [dev trc ,00000] (0.021) Lob locator memory management optimized (note 1280771)
4 ETW000 27 0.004693
4 ETW000 [dev trc ,00000] (0.021) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
4 ETW000 25 0.004718
4 ETW000 [dev trc ,00000] (0.021) Input parameters for SQL statements increased (note 655018)
4 ETW000 26 0.004744
4 ETW000 [dev trc ,00000] (0.015) R3trans export aborts with signal 6 (note 1262245)
4 ETW000 27 0.004771
4 ETW000 [dev trc ,00000] (0.013) Call dbprocedures from a different schema (note 1256862)
4 ETW000 26 0.004797
4 ETW000 [dev trc ,00000] (0.010) Stream compression not switchable (note 1245770)
4 ETW000 24 0.004821
4 ETW000 [dev trc ,00000] 12 0.004833
4 ETW000 [dev trc ,00000] -> init() 21 0.004854
4 ETW000 [dev trc ,00000] STATEMENT_CACHE_SIZE = 1000 40 0.004894
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=152000) : 2b573315c010 (152016 bytes allocated)
4 ETW000 38 0.004932
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=2088000) : 2b5733182010 (2240032 bytes allocated)
4 ETW000 30 0.004962
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=304000) : 2b5733380010 (2544048 bytes allocated)
4 ETW000 33 0.004995
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=16144) : 16a14540 (2560208 bytes allocated)
4 ETW000 30 0.005025
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=32048) : 16a18680 (2592272 bytes allocated)
4 ETW000 27 0.005052
4 ETW000 [dev trc ,00000] -> loadClientRuntime() 1433 0.006485
4 ETW000 [dev trc ,00000] Loading SQLDBC client runtime ... 22 0.006507
4 ETW000 [dev trc ,00000] SQLDBC SDK Version : SQLDBC.H 7.7.4 BUILD 009-123-173-450
4 ETW000 4381 0.010888
4 ETW000 [dev trc ,00000] SQLDBC Library Version : libSQLDBC 7.7.6 BUILD 007-123-197-046
4 ETW000 26 0.010914
4 ETW000 [dev trc ,00000] SQLDBC client runtime is MaxDB 7.7.6.007 CL 197046
4 ETW000 40 0.010954
4 ETW000 [dev trc ,00000] SQLDBC supports new DECIMAL interface : 1 20 0.010974
4 ETW000 [dev trc ,00000] SQLDBC supports VARIABLE INPUT data : 1 20 0.010994
4 ETW000 [dev trc ,00000] SQLDBC supports Multiple Streams : 1 19 0.011013
4 ETW000 [dev trc ,00000] SQLDBC supports LOB LOCATOR KEEPALIVE : 1 17 0.011030
4 ETW000 [dev trc ,00000] SQLDBC supports LOB LOCATOR COPY : 1 16 0.011046
4 ETW000 [dev trc ,00000] -> getNewConnection() 17 0.011063
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1728) : 16a2fa60 (2594016 bytes allocated)
4 ETW000 32 0.011095
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1168) : 16a30a50 (2595200 bytes allocated)
4 ETW000 103 0.011198
4 ETW000 [dev trc ,00000] <- getNewConnection(con_hdl=0) 99 0.011297
4 ETW000 [dev trc ,00000] -> checkEnvironment(con_hdl=0) 30 0.011327
4 ETW000 [dev trc ,00000] -> connect() 40 0.011367
4 ETW000 [dev trc ,00000] INFO : SQLOPT= -I 0 -t 0 -S SAPR3 25 0.011392
4 ETW000 [dev trc ,00000] Try to connect (DEFAULT) on connection 0 ... 76 0.011468
4 ETW000 [dev trc ,00000] Thu Jan 12 12:21:47 2012 1003812 1.015280
4 ETW000 [dbsdbsql ,00000] *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
4 ETW000 33 1.015313
4 ETW000 [dev trc ,00000] -> SetSapdbCA(errcode=4294963288) 20 1.015333
4 ETW000 [dev trc ,00000] -> freeConnection(con_hdl=0) 27 1.015360
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a30a50, size=1168 (2594016 bytes allocated))
4 ETW000 79 1.015439
4 ETW000 [dev trc ,00000] close all opened locators of connection 0 51 1.015490
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a2fa60, size=1728 (2592272 bytes allocated))
4 ETW000 28 1.015518
4 ETW000 [dev trc ,00000] } DbSlSdbConnect(rc=99) 17 1.015535
4 ETW000 [dblink ,00000] ***LOG BY2=>sql error -4008 performing CON 57 1.015592
4 ETW000 [dblink ,00000] ***LOG BY0=>POS(1) Unknown user name/password combination
4 ETW000 27 1.015619
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=41,arg_p=b82ef8)
4 ETW000 31 1.015650
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 1.015667
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=14,arg_p=7fff64a355f0)
4 ETW000 25 1.015692
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 30 1.015722
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=50,arg_p=7fff64a35608)
4 ETW000 28 1.015750
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 1.015769
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=13,arg_p=7fff64a35560)
4 ETW000 25 1.015794
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 1.015813
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=52,arg_p=7fff64a355b0)
4 ETW000 25 1.015838
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 16 1.015854
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
4 ETW000 [dev trc ,00000] release memory of the SIBU buffers 73 1.015927
4 ETW000 [dev trc ,00000] release memory of the STATEMENT CACHE 19 1.015946
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a18680, size=32048 (2560208 bytes allocated))
4 ETW000 33 1.015979
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a14540, size=16144 (2544048 bytes allocated))
4 ETW000 25 1.016004
4 ETW000 [dev trc ,00000] -> sdb_free(p=2b5733380010, size=304000 (2240032 bytes allocated))
4 ETW000 25 1.016029
4 ETW000 [dev trc ,00000] -> sdb_free(p=2b5733182010, size=2088000 (152016 bytes allocated))
4 ETW000 54 1.016083
4 ETW000 [dev trc ,00000] -> sdb_free(p=2b573315c010, size=152000 (0 bytes allocated))
4 ETW000 145 1.016228 -
My iphone 4 won't turn on. I recharged it and still can not get it to power on.
My iphone 4S wont turn on. I have charged it and still no power. Any thoughts on how to fix it?
I suggest charging it for several hours, then trying again.
-
What does it mean when the power up light just blinks
issue with the boot drive? I was going to start up from disk warrior but can't even get the cd drive to come out
no start up sound, monitor won't come on
someone brought this Mac pro 2 to me to get some files off of it. I have not worked with one of these
any help?On a Mac laptop the flashes usually indicate a problem with RAM; the document linked to seems to agree. On the portables it can mean the RAM is not properly inserted. Try reseating the RAM on the RAM cards. Since the machine was brought in, maybe something came loose during transport.
-
my ipad screen is blue, using the home and power buttons together do not fix it.
If you can't reset it by holding the power and home buttons at the same time until you see the Apple logo, then releasing, connect it to your charger for at least 15 minutes then try resetting it again If it won't reset make an appointment with the Genius bar at a nearby Apple store to have it looked at.
-
Satellite A500 - Battery light flashes when connected to mains power
Win 7 Satellite A500 PSAM3A-03P00E.
The battery light flashes when connected to mains power (intermittent fault), when I unplug mains and re-connect flashing stops and battery (high capacity) continues to charge.
Also when battery light flashes the key board back lighting stays on when it should blank out and if the back lighting is off and the battery light starts flashing the key board back lighting doesn't turn on, all other functions seem to work fine.
The battery charges and holds charge as it should (when light flashes battery doesn't charge).Hi
Did you notice this issue from first day of purchase?
Theoretically it could be possible that your battery starts to malfunction
At the other hand an electronic issue might be possible too
However, try this:
Remove ac adaptor and battery. Then press and hold power buttons 30 sec long.
Then insert the battery and connect AC adaptor again does it helps?
By the way: is BIOS up to date? If not, perform an update.
Maybe you are looking for
-
SMB access for Active Directory users
Hi there, My server is an OD Master bound to AD for authentication and my institution's Kerberos realm. When I try to share files from the server via SMB and connect as an Active Directory user I get the following error in the logs: [2009/06/11 12:02
-
How to change the import for run-time sharing url at run time in flash 8. As it is giving problem when i embed the code on orkut it takes the path of the orkut site or any other site/sharedlibrary.swf as it dont get the swf on the site which it is em
-
Dear All, pricing scaling question ?? When scale type which controls the scale value is set to "A" (Base-Scale). we need to set the scales From a certain quantity or value, My question is, what happens if the customer order less that value. Eg : my
-
FI-GL: Question regarding "alternative account no." - Why in BSEG?
Hi all, I have another question. I think this is really a little bit tricky this time (I spend a lot of time investigating this question but couldn't find an answer). It's regarding the field "alternative account no." in FS00 (table SKB1-ALTKT) and i
-
HT3669 Phaser Tektronix/Xerox 780 - Does anyone know of any drivers for mac mountain lion?
I have updated to mountain lion and the Phaser 780 no longer works? It just says timed ou, can any one help? Thanks.