Satellite L30-10T - After XP downgrade it's very slow

Hello,
I have downgrade my Satellite L30-10T from Vista to XP Pro SP3 and I have installed all driver, but I have some problems:
All systems command are very very slow, isn't possible switch-off by XP command, install new programs is slow ....
thank you

Hi
Do you have yellow exclamation marks in device manager?
On the Toshiba website I have founded an installation instructions document. Did you follow this installation order for all drivers and tools?
Furthermore please check in device manager if you have enabled the DMA mode for the primary and secondary IDE controller.

Similar Messages

Satellite L30-10T: I need the original number of the inverter

I bought a second hand Toshiba Satellite L30 10T without an inverter.
I need the original number of the inverter .
Ho can help me.
Dik

Hi
I dont know the original part number of the FL inverter but the part can be ordered from Toshiba ASP in your country!
Here you can find all ASPs worldwide.
http://eu.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
I recommend calling the guys and to order the part.

I have upgraded my I phone's ios from ios 6.1.4 to ios 7. After that my phone is very slow and getting hang. So now I wants to downgrade from ios 7 to ios 6.1.4. Please let me know how I can do it

Subject: need to downgrade ios
I have upgraded my I phone's ios from ios 6.1.4 to ios 7. After that my phone is very slow and getting hang. So now I wants to downgrade from ios 7 to ios 6.1.4. Please let me know how I can do it

You cannot downgrade.

Satellite L30 PSL33E: After downgrade to XP DVD-RAM doesn't burn

My notebook (Toshiba Satellite L30 PSL33E) came with Windows Vista but it is very slow with this OS and one of my friends downgrade my OS to XP.
But now my DVD-RAM doesn't burn!

Please check this:
Access the DVD-RAM properties (right click & properites).
There you have to choose the TAB called recording.
Then check if the option Enable CD recording on this drive was marked!!!
Bye

Satellite L30-105 (PSL33E) - BIOS downgrade succesfull

Hi all,
first of all sorry for my english,
I'm the owner of Toshiba Satellite L30-105 (PSL33E) bought in Italy. I was not stisfied of Bios update v3.10 and I've searched for older bios version but on european support server, all older bios (2.6 -3.0 etc) was disappeared.
Reading this thread http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=120416 I've read about using the US bios files for downgrading the bios like suggested from user Anhchuong.
A lot of us was sceptic about use US bios on EU laptop.
After a lot of time, and after knowing that US L35-S2366 (PSL33U) have exactly the same spec of mine (except mine have 1024b ram instead of 512), I've decided use v 3.0 bios version for upgrade my bios. ALL WORKED!!!
At this time I'm writing from my lappy and I can confirm that CPU temp is degree 6-7°.
Hope this help someone else.

Thanks for your posting. It is very useful info.

After latest upgrade, iPOD sync VERY SLOW ??

after latest iTunes upgrade, my iPOD classic sync is very slow - new podcasts (5) took over 6 hrs to sync ??
anyone having these issues ?? thx

f you change your Sync password, you might see this error message on your other devices "Sync encountered an error while connecting: Incorrect name or password." error appears in the bottom error bar. You can update your password on your device by completing the following steps:
* Click the '''menu button''' and choose '''Options'''.
* Select the '''Sync''' panel.
* Click ''''''Sign in'''''' and enter your password in the sign in page.
* Click '''Sign in''' to sign back in to Sync.

Rendering After Effects Comps can be very slow

I have a PP CS6 project which has quite a few in-line After Effects comps in the main sequence. The are all image stabilisation (for clips which are are of a different size of the sequence). When I render then most of fairly quick (several frames a second) but some are very slow (a frame every few seconds). The settings on the warp stabilise is the same for all of them. It seems to be the longer clips that cause problems (sometimes over 30 secs). Anyone know why or got a way to speed up the longer clips?
Ben

Captain Mench wrote:
Now -- if you need to export an alpha channel out of AE then you'll need some specific formats.
Good luck,
CaptM
Welcome home, Mench!
To maintain the alpha channel from AE, the OP will want to look up how to be using two codecs, Animation and ProRes 4444. Both are extensively described in the help system for FCP and After Effects or just google them for several hours of interesting reading. The OP will also need to understand the concept of an alpha channel which, come to think of it, was difficult for me.
bogiesan

After ICS upgrade Phone is very slow to make a call

After ICS upgrade , when I select a contact to call , and then press cell or home , the response time is very slow.
I have pressed the call button more than once thinking it did not take. Then when it does take I end up calling the person
more than once because it has buffered the calls . What can be causing this ?
If you have an answer Please email me at: Personal email address removed to comply with VZW ToS< Thanks
Message was edited by: Verizon Moderator

Mine and my wifes thunderbolts have become horrible since the upgrade was pushed. Apps are slow, or don't even load some times. Trying to make a phone call is sluggish and at times it will try to call twice at the same time for some reason.
however, i overlooked all of this because i liked the look of ICS. then last week after being pushed two updates in a row, it now will just turn off at random times. i can't even go to a webpage anymore because it will immediately crash. better yet, when i try to reboot the phone, it will get to the point where it recognizes the verizon network, and then just shut off again. this happened to me 8 times in a row the other day. it will also say that the battery is in the red, even though it had a full charge before the crash.
i have found that if i plug my phone in and then boot it up, it will boot up correctly. that is the only way i have been able to get it to actually boot up since all of this started happening. it will still show the battery is about to die, and then about 15 minutes later it will show it is at 100% again.
i tried to do the chat with a reprensentative today and the guy was asking for my account password before he could look into my issue. what kind of company asks for a password. that is the dumbest thing i have seen. so now, i have a phone that "sometimes" works, and online chat that reminds me of a scamming site.
when my wife called to talk to someone they told her that it was htc's fault and that it would cost us $60 each to switch to new phones. how is that customer service? besides, verizon's network sent the update. there is no way that they can try to say it wasn't their fault. that isn't how the real world works.
i have reposted this from another thread, but since there seems to be someone from VZW reading this, perhaps some info can be found...

After index creation infocube is very slow! (don't produce result)

Hello all,
       I have the following problem, on a single cube ZWLPIANIF, after the index creation from manage of cube, the query on this cube is totally unusable because during a lot of time (it's necessary stop the execution) I whait over 30 minutes. When I delete the index the query work fine a little bit slow compared to another cube that have index.
ZWLPIANIF have 1,200,000 record loaded in FULL
from RSPC we made the following step:
deletion index
loading
creation index, the job of creation is completed successfully (in SM21 no log, in ST22 no dump, in SM37 is ok).
This is the details of our system SAP NetWeaver 2004s:
SAP_ABA     700     0016     SAPKA70016
SAP_BASIS     700     0016     SAPKB70016
ST-PI     2008_1_700     0000          -
PI_BASIS     2006_1_700     0006     SAPKIPYM06
SAP_BW     700     0018     SAPKW70018
FINBASIS     600     0013     SAPK-60013INFINBASIS
SEM-BW     600     0013     SAPKGS6013
BI_CONT     703     0011     SAPKIBIIQ1
ST-A/PI     01L_BCO700     0000          -
everyone have some ideas?
REGARDS
Gianvito

Hi,
You can analyse/debug the query through RSRT in execute+debug mode and please check wether the database optimiser chooses the right index that means wether statistics are updated or not.
You can do a reorganise of indexes as well.
Thank you,
Tilak

After mountain lion install mac very slow

After Mountain Lion install, my MacBookPro mid-2009 version is extremely slow. What could be causing it to slow down ?

There are a bunch of threads about this. Use the search function and see what others are finding out.

After updating 10.9.2, VERY slow startup

Hello, I updated 2 days ago to Mavericks 10.9.2.
I am using a Mid 2010 Macbook Pro i7 2,66Ghz 8GB RAM.
I was using Mavericks without any problem but since this update it takes AGES to startup my macbook, about half an hour...
Once finally starts it goes completely smooth and fine...
Any suggestions?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message by pressing command-V.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract—not at the end.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent of each. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

After OS X update loading very slow.

Hello , i'm new here - my first problems with my mb(late 2009 edition).
my first problem - after i reinstalled my snow leopard(2 days ago) it was fast (15 -20 seconds to load it up ). after i updated via ( Software Update 10.6.7) it takes ages to load. usualy almost 2 mins or so... atm no additional apps are instaled just starcraft2 and pixelmator.
my second problem - after i load it up starcraft2. it's working normaly in the main menu and b.net game lobby. Problems apear only when actual game starts. first 1 - 3 mins is ok after that , persistent freezout's. freezout for a ~0,5 second and it repeats after 1 or 2 seconds again for 0,5 sec freeze. and it usualy can be for entire game. visual and sound settings are all low. this problem occured only after i reinstalled os.
What actions i did take ? Run disk utilities thats all, dont know what to do more ,
btw my Safe mode just wont start up tried to to press Shift after starting sound , tried (option , cmd , p , r) wait for 3 sounds(didn't work) and then shift combination didn't work either.
Btw sorry for my bad english isn't my native language .

I have noticed something similar on my Win7x64 system, but am not able to reliably reproduce it. It seems, for me at least, to be a combination of +Clarity and Lens Profile Correction which will always trigger an observable screen redraw when moving from segment to segment in 1:1 view mode. The variable is the delay.....most often it's a fleeting effect, but occasionally there's a more obvious delay in redrawing the image display. I suspect the more obvious delay is, in addition to the +Clarity and Lens Correction, some internal resource utilisation over a longer Lightroom session....certainly every time I've encountered it a Lightroom restart has cleared it up.
Don't know it that helps, or gives you any pointers to reducing the impact. Because of another "issue" with Lens Corrections (when it's applied, Spot Removal work gets slower), I tend to apply it last of all when editing pictures....so that also helps avoid this 1:1 screen redraw problem.

After update, my computer is very slow

Games are extremely slow to open on facebook

Is this a problem with Firefox for Android or desktop Firefox?

After installing Photoshop it became very slow

I downloaded the demo version of Photoshop but it became much brake system, even an ordinary photo opens 5-6 minutes. I have a pretty powerful machine. Before the update it took a couple of seconds

Please clarify: what "update"? Trial versions cannot be updated, if I recall correctly.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Windows vitual PC / XPM on Satellite L30-105

Hello,
I'm running Windows 7 on my Satellite L30-105. And it's running very well.
Right now I would like to install Windows Virtual PC to run Windows XP Virtual Mode. But the laptophardware does not support
a vitual pc. Is there any solution for this problem?
Thanks anyways.
Ciao
Guido

Hi
Sorry mate, I have not good news for you but there is no solution for this problem.
The point is that Virtualization must be supported from the hardware (CPU, mainboard, chipset) and BIOS too. That means you cant something to use Virtualization.
The only option is buying a new notebook. ;)

Satellite L30-10T - After XP downgrade it's very slow

Similar Messages

Maybe you are looking for