Satellite L30-114 - Need driver for sound and SM bus controller

Hi, friends
Plz I need your help on my Satellite L30-114. Am having problems with the sound and the SM bus controller, even I have downloaded the sound driver and install it, from my device manager sound is not sick, it always telling me my device is working properly? Plz i need help on that.
Secondly my SM bus controller is sick it has the cormer sign plz how can I rectify it, even my wireless is working fine.
Only the sound and sm bus controller is giving problems.
Thanks will be waiting for your replies.
newton

Hi
To be honest I doubt that you have installed all files from the Toshiba website. Normally the Toshiba website contains all drivers and tools that you need to restore factory settings after this there are no more yellow exclamation marks or unknown devices in device manager.
By the way: What installation order you have used?
On the Toshiba website you can find the installation instructions document. This is a list for the recommended driver installation order.
Check this!!!

Similar Messages

  • Equium L40-10Z - Need WXP driver for sound an SM bus controller

    Was vista, lost system, reformatted and installed XP as no recovery discs for Vista. Now no sound and says SM bus controller unplugged.
    Any help please or where can get proper recovery discs (UK). Thank you

    Hey,
    I think sound doesnt work because you have no drivers installed therefore and also for SM bus controller you have to download the driver on Toshiba page.
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    *Archive* > Equium (Notebooks) > Equium L Series > Equium L40 > PSL41E
    But you will see that there are no XP drivers available but what you can do is using the PSL49E model number that supports Windows XP. Usually there is no big difference between these models and the drivers should work on your system too.
    For SM bus controller you have to install the chipset driver and for sound card the sound driver but latter requires Service Pack 3.

  • Need driver for C675-S7200 SM Bus Controller

    Hello forum I had a nasty back door trojan and I had to reformat my drive, well now that I have done that evrything has come back fine but under my device manager I have one device that states The drivers for this device are not installed. (Code 28) and its for the SM Bus Controller. I didnt see any chipset drivers under the driver down loads on Toshiba for my laptop so any help is much appreciated Thanks

    Satellite C675-S7200
    had to reformat my drive
    No way to tell what that means. Sounds like maybe you installed a retail version of Windows.
    If so, it's best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. Drivers and utilities will have been installed in the proper order. No activation is required.
    See the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
       Satellite/Satellite Pro C600 Series User’s Guide
    If you failed to burn the recovery discs, you can obtain them from Toshiba.
       Order Toshiba Recovery Media
    -Jerry

  • Satellite U200-10H - Need schematic for sound card

    Need schematic soundcard for Satellite U200-10H.
    Microfone power no work, there was a short circuit or an electrostatics.

    Hi
    I think you will not find a schematic for the sound card or your notebook. I never saw such technical manuals on the Toshiba website and I think they are not for public and only for the authorized service providers.
    If you have a hardware issue you should contact the nearest ASP:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
    I have only good experience with my ASP. The technicians are very friendly and do the work as fast as possible. :)

  • Need driver for sound (Microstar MS6558)

    I need the driver for the ms6558 motherboard.  My sound card doesn't work, so I either need the onboard sound driver or the mainboard driver itself.  someone help.

    No, there is none to be found. Furthermore MS-6558 seems to be an OEM board made for a PC manufacturer but no MSI retail board. Those are not covered by MSI support or this forum but just the manufacturer.
    None the less from google results it should have a SiS chipset so try here: http://download.sis.com/download/agreement.php?id=155808&url=download_step1.php?id=155808
    If no help contact PC manufacturer.

  • Need driver for Sound blaster CT 5

    Can not locate any reference to a driver for my Ct 5807 card--The device list says there is such an animal but I can't seem to locate a path to a download or one to purchase a disk with the driver--anu advice will? really be welcome--Thanks--Mel

    mrnester,
    It is an OLD Ensoniq card, but you will need to tell us what operating system you need a driver for before any of the forum posters will be able to make a suggestion.
    Daniel

  • Need driver for sound

    i have a  dv6910us Entertainment Notebook PC  I am running XP the sound is not working the error message says there are no sound devices installed.  I need the link to download the correct driver please.

    Install HP Software Update from below link which will automatically install sound drivers for your notebook
    ftp://ftp.hp.com/pub/softpaq/sp38501-39000/sp38874.exe
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • Satellite P10-504 WXP driver for video, modem and SM bus controller

    I have just had to replace the hard disk in my P10-504 and I now have lots of problems!
    1 - I used the retore disks and XP home is installed BUT the video, modem and SM bus controller all all flagged in Control Panel and not having drivers installed! The modem I can live without but I would like the video to work properly and the SM bus controller is also pretty essentil. Guess what, I can't
    a) find my model listed on the Toshiba website and
    b) I can't find drivers for either the video or SM bus controller.
    I have downloaded the 'universal' Nvidia driver but it doesn't work! As for the SM bus controller, I've no idea where to look!
    Any ideas please?
    Thanks
    Tim

    Hi
    Your posting is a little surprise because all XP drivers for your notebook must be available on the Toshiba driver page.
    Did you choose the right notebook series and did you download and install all necessary drivers???
    As first its important to install the chipset utility and depending on installed graphic card
    You have to choose and to install the right display driver!
    Again! The drivers are on the page!
    http://eu.computers.toshiba-europe.com -> Support & Downloads -> Support page -> driver download

  • Satellite A300D-126 - Need drivers for Windows 7

    Hello everyone.
    We have two problems with two drivers so:
    Display driver 8.634.1 - don't work zoom settings. New Catalyst 9.11 does not help me.
    Sound Driver 4.98.6.61 - failed instaled.
    I installed display driver for Vista and sound for XP but I think I need an update because videocard with this 8.452.2-080130a-059298C driver working so slowly .
    What to do ?
    Thanks in advance

    Hi mate,
    First of all you cant use Windows XP drivers on Windows 7. This will not work.
    You wrote about different drivers for Vista and XP Ok, the most Vista drivers are also work on Windows 7 but Satellite A300D is Windows 7 supported. That means you can already get Windows 7 drivers on the Toshiba page:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Check this!

  • Finding the ASIO driver for Sound Blaster ZS

    Finding the ASIO driver for Sound Blaster ZS
    And One More question
    Anybody are using the Guitar Rig (Guitar effect software)
    How to detect the Sound Blaster ZS sound card with WDM Driver

    shlomokg wrote:
    Hello,
    I am trying to use my Sound Blaster LX with the new Adobe Audition 2.0 with no luck.
    With the new version 2.0, Audition came with this ASIO solution that should make things easier.
    Somehow for me it does not work.
    Please advise, what should I do that Audition will work with my sound card?
    Thanks,
    Shlomo
    Perhaps Asio4All or USB-ASIO (LX not said to be supported) driver is needed to be installed to get a sort of ASIO support for that USB device.
    jutapaMessage Edited by jutapa on 07-2-2006 07: PM

  • I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?

    I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?  Both computers have OS X10.9.3.  Currently they are connected by a Firewire 800 cable.

    You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
    Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
    Matt

  • Missing *.inf driver for 2605dtn and windows 7 64 bit

    missing *.inf driver for 2605dtn and windows 7 64 bit
    I just piurchased a new HP laptop with windows 7 64 bit installed.  I do not have any windows 7 disks.
    Where do I obtain the necessary drivers for this printer?

    HI RandyJohnson,
    You do not need to download drivers for this product. Print drivers for your product are available within the Windows 7 operating system. Use Devices and Printers, formerly known as the Add Printer Wizard, to obtain the Windows 7 update. For more information,  go to Install the Printer Driver through the Windows 7 Operating System (c02536257) (in English).
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Help need driver for Mac Yosemite 10.10.2 for LaserJet Pro Color...

      Please help me find the driver for the HP LaserJET COLOR PRO 200 FOR MAC OXC 10.10 YOSEMITE
    This question was solved.
    View Solution.

    This should be what you need
    Driver for for OS X 10.9 Mavericks and OS X 10.10 Yosemite
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-125410-4&cc=us&dlc=en&lc=en...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I need driver for the HDR-SR5 for windows 7

    I need driver for the HDR-SR5 for windows 7

    I used the Vista driver on Win 7 preinstalled notebook and it did work.
    I have no idea what A200 notebook model you have but in my case the driver was called:
    Flash Media Driver 2.0.0.6
    This is a driver for your Bridge Media Slot. This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.

  • I need driver for Pavilion 15 n204tx win7 64bit

    Hi,
    I need driver for HP Pavilion 15 n204tx Notebook PC with NVIDIA GEFORCE graphic card win7 64bit.
    3D Video Controller
    PC\VEN_10DE&DEV_1292&SUBSYS_2166103C&REV_A1
    PC\VEN_10DE&DEV_1292&SUBSYS_2166103C
    PC\VEN_10DE&DEV_1292&CC_030200
    PC\VEN_10DE&DEV_1292&CC_0302
    Ethernet Controller
    PC\VEN_10EC&DEV_8136&SUBSYS_2166103C&REV_08
    PC\VEN_10EC&DEV_8136&SUBSYS_2166103C
    PC\VEN_10EC&DEV_8136&CC_020000
    PC\VEN_10EC&DEV_8136&CC_0200 
    PCI Device
    PC\VEN_10EC&DEV_5227&SUBSYS_2166103C&REV_01
    PC\VEN_10EC&DEV_5227&SUBSYS_2166103C
    PC\VEN_10EC&DEV_5227&CC_FF0000
    PC\VEN_10EC&DEV_5227&CC_FF00 
    PCI Simple communications Controller
    PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C&REV_04
    PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C
    PC\VEN_8086&DEV_9C3A&CC_078000
    PC\VEN_8086&DEV_9C3A&CC_0780
    SM Bus Controller
    PC\VEN_8086&DEV_9C22&SUBSYS_2166103C&REV_04
    PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C
    PC\VEN_8086&DEV_9C3A&CC_0C0500
    PC\VEN_8086&DEV_9C3A&CC_0C05 
    Universal Serial Bus (USB) Controller
    PC\VEN_8086&DEV_9C31&SUBSYS_2166103C&REV_04
    PC\VEN_8086&DEV_9C22&SUBSYS_2166103C
    PC\VEN_8086&DEV_9C22&CC_0C0330
    PC\VEN_8086&DEV_9C22&CC_0C03
    Unknown device
    ACP\HPQ6007
    *HPQ6007
    NVIDIA GEFORCE graphic card
    Regards,
    Sachin

    Hi,
    Your machine only supports Windows 8. BUT please try for W7:
    HP 3D DriveGuard Software (ACP\HPQ6007):
      http://ftp.hp.com/pub/softpaq/sp61001-61500/sp61291.exe
    Ethernet Controller (PC\VEN_10EC&DEV_8136&SUBSYS_2166103C&REV_08)
      http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44990.exe
    PCI Device card reader (PC\VEN_10EC&DEV_5227&SUBSYS_2166103C&REV_01):
      http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52186.exe
    PCI Simple communications Controller (PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C&REV_04):
      http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46507.exe
    SM Bus Controller (PC\VEN_8086&DEV_9C22&SUBSYS_2166103C&REV_04)
      http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52791.exe
    Universal Serial Bus (USB) Controller (PC\VEN_8086&DEV_9C31&SUBSYS_2166103C&REV_04)
       Intel USB 3.0 Driver for Intel 8 and U/Y Series Products
    3D: You need to install Nvidia driner to fix this. You can get autodetect:
       http://www.nvidia.com/Download/Scan.aspx?lang=en
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Help! Hit an wierd exception when edit a column in editable table

    I created a view object with 3 entities objects (3 tables) in model project and drag view object into jsf page to create as an edit table in view controller project. when I run this jsf page and update the value for a column of one row in the page, h

  • Limit the words usage in the text field

    Hi there, I need some help here. Is there any method that I can use to limit the usage the words in the text field. Its very helpful to me. Thanks

  • Adjusting playback speed of clip selection

    I have a 4 minute portion of video that I want to give a "fast forward" look to. It's boring if viewed in real time. How is this done? Also, why can't I find the search feature to see if anyone has already asked this? Thanks.

  • Filter in Attribute view

    I basically want to have a view that displays two columns from my table, but not have any of the columns repeat the same ID or Name For example if table data looked like this  Name ID John 204 John 204 John204 Mel 205 Mel 205 Mary 205 I want the View

  • Listener Core Dumping..

    There seems to be a problem with tnslsnr. A couple of seconds after I execute "lsnrctrl start listener" tnslsnr disappears and there is suddenly a core file in my directory. I can't seem to figure out why it is doing this suddenly. We have had the or