Satellite L300-11G XP (Home Poland): Hibernation is not working

Hi,
I Bought my computer without OS, I installed XP and drivers (but I couldnt find any info about proper sequence of installing drivers - is there any?)
All is working without hibernation.
Power saver dosnt see this function
Turning off power saver and turning this option in XP on (it is in the window with screensavers - I dont know proper name) results an error and info than another process is using hibernation
Are there any drivers missing?
Darek

>On the ShutDown dialog, hold down SHIFT to
>show Hibernation.
>If Hibernation doesn't
> ,
It doesn't show in any conditions
> you need to enable it. Log in as
>Administrator and enable Hibernation in the
>Power options.
This produces above mentioned error "...Another process is using..."
Enabling hibernation in Power Saver results
Toshiba Power saver: "Critical error, this program will terminate Code:0x0" /translation from Polish/
> You may need to change the
>Power Scheme to something other than
>"Toshiba Power Saver".
After stopping the Power Saver, or changing it into different option in Power Management the communicate that follows enabling hibernation is still the same:
"Process cannot get acces to file because it is used by another process/ translation from Polish/
And this is what I need - what is the file mentioned name, and what process has access to it. When i localize the drivers that contain those files/procesess I will be able
go next step further in solving this problem
>If you have a Virus scanner, try
>disabling it. > Some Virus scanners can
>interfere with certain functions If all else
>fails,
I know it.
>Also update the BIOS,
It has been updated first
>reinstall the Common Modules if that model
>has them, and reinstall the Toshiba Power
>Saver.
To save the time of the readers I should write that all drivers are up to date I have just bought the computer and I installed all from Toshiba support pages
Btv I dont use SATA drivers - I turned sata off in computer setup (I dont know if it is important)
>you may need to run recovery.
The System never worked well so I'm afraid that there is nothing to recover :-)
- Toshiba was without OS when I bought it.
Thank you for your effort to help :)
Best regards
Darek

Similar Messages

Satellite L300 - after Win8 load DVD drive is not working

I have just loaded Windows 8 on my Satellite L300. The DVD no longer works with an error message 39 it says the driver is corrupt. Also external attached DVD's are not recognised. I cannot find a driver to reload.
Any suggestions.
Regards

Check this article:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
If the TOSHIBA Recovery Media Creator or TOSHIBA Disc Creator are installed on the HDD, there might be a issue between Win 8 and mentioned software
So uninstall these tools, then restart your PC using the Power-->Restart option in Windows 8. Your CD/DVD should be accessible now.

Windows XP installation on Satellite L300 11G

Hello,
I have a problem installing windows XP on my Toshiba Satellite L300 11G.
It does not recognize the SATA HDD. SO I downloaded the files that were needed (Intel Storage....) and then I get an error: iaStor is corrupted. I am pretty new in computing so I do not know if I downloaded the right thing. Please if someone could guide me trough and give me a link to download the correct file.
And does that message come only if I fail in choosing the correct driver when asked?? Or is there something else I am doing wrong...??
Please help. I am trying to fix this for several days, and I bought my laptop a few days ago and I need it for business. I would appreciate your help a lot.
Thanks.

Come on buddy... Please dont mix everything!!!
*_Regarding the Toshiba Vista Recovery CD:_*
If you want to create the Toshiba Vista Recovery DVD and want to burn the preinstalled Toshiba image on a DVD then use the Recovery Disc Creator tool.
And YES, the user manual contains the info how to do this because Ive checked it and found the needed info!!!
*_Regarding the new XP installation_*
If you want to install the XP OS on this notebook, then you have to include the SATA driver like described by Gipsyman above!!!
The XP OS installation will format the HDD or partition and will erase the installed operating system.
Therefore it would be advisable and recommended to create the Toshiba recovery DVD firstly before installing the XP.
I think this should be clear.

HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thanks

well in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

Satellite L300-19U - How can I reinstall Vista without working DVD drive?

Hello
I have a big problem with my notebook Toshiba Satellite L300-19U.
I did installed 1month ago Windows XP on it and now is my DVD-ROM broken, it didn't read DVD just CD's. So I can't use my Vista recovery DVD to reinstall Vista. Did anyone had the same problem?
I heard there is a partition (hiden) where the recovery is on it. How I can find this partition? And if I find her, can I boot directly from the partition to recover Vista? If no,is there a other chance to recover it?
Please help me to reinstall the Vista recovery partition!

Hi!
The hidden partition that you mean is a Windows Vista feature but you cant restore Vista with this partition. The point is that the partition is also deleted because you have installed Windows XP on it.
Restoring Vista without recovery disk is only possible if Vista is still installed on it. Then you can go in the advanced boot menu and select repair my computer. Then you can choose the Toshiba HDD recovery option. This is a feature that restores Vista from the second partition.
But as I said only possible with installed Vista.
Just one question: Why do you dont go to an authorized service provider? If your notebook is still under warranty you should get a new CD/DVD drive for free. Normally it should only take few days and then you are able to install Vista again! :)

Satellite L300 BIOS update problem: "That BIOS is not for your notebook PC"

I got Satellite L300 notebook and I want to update it's BIOS (current v1.50), so I've downloaded bios update v1.60-WIN and when I run extracted PS10160M.exe file - I get a message that "That BIOS is not for your notebook PC".
What I'm I doing wrong?
ps: that BIOS update was automatically suggested after registration on Toshiba website via serial number.
UPD: seems like autosuggestion fail: Manual search shows that 1.60-win bios update not suitable for Satellite L300 PSLBCE model. :-(

Did you download the BIOS for the PSLBCE model?
You cannot use the BIOS from other L300 models, for example PSLB0E.
If you installed Windows yourself using a generic Windows Disc, you will need to install the Value Added Package from the Toshiba website. The BIOS Update requires the TVAP package to detect the machine properly.

[HELP] [BPEL 11g] Customized BPEL worklist app could not work on JBoss

Dear all,
We are developing the customized Human Worklist app based on BPEL HW API 11g.
The application (some jsp pages) works fine in JDeveloper 11g. However, after deploy to JBoss, it always prompt with "NoClassDefFoundError" exception, although we have already add following 7 jar files into Classpath:
${jdeveloper.home}\Middleware\wlserver_10.3\server\lib\weblogic.jar
${jdeveloper.home}\Middleware\jdeveloper\modules\oracle.jrf_11.1.1\jrf.jar
${jdeveloper.home}\Middleware\jdeveloper\modules\oracle.webservices_11.1.1\wsclient.jar
${bea.home}/AS11gR1SOA/soa/modules/oracle.soa.fabric_11.1.1/bpm-infra.jar
${bea.home}/AS11gR1SOA/soa/modules/oracle.soa.workflow_11.1.1/bpm-services.jar
xml.jar
xmlparserv2.jar
Then we manually copy many other jars (nearly 100) under Weblogic server, but it still prompt lacking of some jar file with "NoClassDefFoundError" exception.
So, does BPEL 11g support deploy HW app outside weblogic, like JBoss? If so, what we need to set at JBoss side to run our app?
Thanks a lot.

Not sure it is available yet as I have not seen any doc for 11g.
here is the 10g instructions which may provide some pointers.
http://download-east.oracle.com/docs/cd/B31017_01/web.1013/b25947/deployment_topics012.htm
cheers
James

Satellite L305D-S5881: Touchpad and FN keys do not work after Win 7 installation

I have recently installed windows 7 and all of a sudden yesterday my touchpad did not work.
I was not able to move my mouse arrow at all.
I had to purchase a wireless mouse so I could use my laptop.
When I press the fn key plus f9 nothing happens to see if it is enabled or disabled.
I have a satellite l305d-s5881
thanks for your help

Hi mate
The Satellite L305D-S5881 belongs to the Toshiba US series and has been released for US market.
You will need to visit the Toshiba US driver page in order to get all drivers.
To get the touchpad working, you will need to install the Touchpad driver.
Furthermore the FN buttons are controlled by VAP (value added package) and Flash Card Support Utility.
You need to install both; firstly VAP and then Flash Cards.
Here is the Toshiba US page:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
Greets

Home/sleep button is not working properly. why?

i just bought i new ipod on ebay. But home and sleep button on my ipod touch 4th generation is not working properly after long sleep time. but it works properly when its plugged-in for charging..why? how can i solve it?

Hi,
Try resetting your iPod: http://support.apple.com/kb/HT1430.
Hope this helps!
---likeabird---

OBIEE 11g - Navigation in Parent Child Hiearchy not working

Hi All,
I have a employee parent child hierarchy and I want to show revenue for each employee in the report. I have modeled my revenue as a measure like case 4 shown in the following link
http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-parent-child-hierarchies-multiple-modeling-methods/
So for example this is my report ,
--David (30)
---Sandra (15)
-----Joe (10)
Joe'e revenue is 10, Sandra's is 5 (showing her 5 Joe's revenue) and David's is 5 (showing his 5 Sandra's revenue)
Issue :
Now what I want is to provide action link on the revenue column so that when user would click on revenue for any employee it would direct them to a detail report showing the bifurcation.
For ex, I want that when user click on 15 which is Sandra's revenue, he would be redirected to a detailed report for Sandra and similary for Joe and David
MY ISSUE IS that the navigation is NOT working for sandra and Joe. It is only working for David (who is the ancestor of sandra and Joe). When I click on 15 to see sandra's detail report, it doesn't do anything and in the bottom left corner of the browser status bar below I see an ERROR saying
(same for Joe but David work's fine)
Message: 'getLevelInfo(...)' is null or not an object
Line: 1
Char: 11142
Code: 0
URI: http://localhost:7001/analytics/res/b_mozilla/answers/selectionsmodel.js
Why is that happening? Is that because I have modeled the revenue as an measure and not attribute. Is navigation not possible in this case?
Anybody has any solution or workaround for this, it will be highly appreciated.
Thanks,
Ronny

Ok, so let me explain this in detail and give the structure of my tables and the data,
There are three tables.
1.Parent Child relationship table - pctable
2.Closure table which OBIEE creates through a script - reltable
3.Fact table which contains the revenue - facttable
This is the data
pctable
personid | managerid
David | NULL
Sandra| David
Joe|Sandra
reltable
memberkey | ancestorkey |distance |is_leaf
David|NULL|NULL|0
David|David|0|0
Sandra|Sandra|0|0
Joe|Joe|0|0
Sandra|David|1|0
Joe|Sandra|1|1
Joe|David|2|1
facttable
personid|revenue
David|5
Sandra|5
Joe|10
and my joins conditions are, I join pctable to reltable and then reltable is joined to facttable like this.
pctable.personid = reltable.ancestorkey
reltable.memberkey = facttable.personid
and then in the report, when I pull up the pchierarchy build from pctable and revenue , I get as below and like I said, when I click on Sandra to see the revenue she contributes, I am not able to navigate. Can you let me know what modifications needs to be done?
---David(20)
----Sandra(15)
------Joe(10)

OAM 11g "Failure URL" in Authoriztion policy not working?

Hi,
Per the subject, I am running OAM server 11g (11.1.1.3), with an OAM 10g Apache webgate.
In the OAM Authorization policy (protected), I have specified a full URL for the "Failure URL", to get the browser to redirect when an authorization failure occurs.
However, when I test with a user that does not have access (user authenticates ok, but doesn't have right to access the protected resource), instead of the browser being redirected, I am getting an "Oracle Access Manager Operations Error" page.
I've been trying to figure this out, and have found several threads about this, e.g.:
OAM 11g authz redirect URL not working?
But, as I said, I am using OAM 11g server, and there is no "Inconclusive URL" in the policy settings (I guess there was in 10g, but not in 11g).
I have trace logging enabled on the OAM server, and I can clearly see that the request is getting "results DENY", but there's no indication in the logs that OAM server is aware of any failure redirection URL.
I've also got a header trace, and I can see that the browser is simply being re-directed to the "/oberr.cgi...." URL, so it' not going "somewhere else".
So, does anyone know why the "Failure URL" is not working in OAM 11g in Authorization policies?
Thanks,
Jim
P.S. The URL that it's suppose to be re-directing the browser to is in the Public resources under Authorization, and as I said, I don't see the browser even attempting to go to the failure URL, either via header traces or the OAM server logs.
Edited by: jimcpl on Nov 5, 2011 8:53 PM

Hi,
Per the subject, I am running OAM server 11g (11.1.1.3), with an OAM 10g Apache webgate.
In the OAM Authorization policy (protected), I have specified a full URL for the "Failure URL", to get the browser to redirect when an authorization failure occurs.
However, when I test with a user that does not have access (user authenticates ok, but doesn't have right to access the protected resource), instead of the browser being redirected, I am getting an "Oracle Access Manager Operations Error" page.
I've been trying to figure this out, and have found several threads about this, e.g.:
OAM 11g authz redirect URL not working?
But, as I said, I am using OAM 11g server, and there is no "Inconclusive URL" in the policy settings (I guess there was in 10g, but not in 11g).
I have trace logging enabled on the OAM server, and I can clearly see that the request is getting "results DENY", but there's no indication in the logs that OAM server is aware of any failure redirection URL.
I've also got a header trace, and I can see that the browser is simply being re-directed to the "/oberr.cgi...." URL, so it' not going "somewhere else".
So, does anyone know why the "Failure URL" is not working in OAM 11g in Authorization policies?
Thanks,
Jim
P.S. The URL that it's suppose to be re-directing the browser to is in the Public resources under Authorization, and as I said, I don't see the browser even attempting to go to the failure URL, either via header traces or the OAM server logs.
Edited by: jimcpl on Nov 5, 2011 8:53 PM

OBI 11g Enterprise Manager (EM Website) does not work with IE8 (v8.0.6)

I am unable to login to the 11g EM website on Windows x64 2003 server. I get the below error:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0)
Timestamp: Wed, 6 Oct 2010 10:41:18 UTC
Message: Object doesn't support this property or method
Line: 4354
Char: 1
Code: 0
URI: http://YZU-1:7001/em/afr/partition/ie/default/opt/boot-11.1.1.3.0-0084.js
Any help is appreciated.
Thanks
B

Hi,
OBIEE 11g does not work with IE8.
Check this......What's wrong in OBIEE 11g
Regards,
Srikanth

Home Share ATV 3 not working

I cannot get Home Sharing to work on my ATV. It works from my husband's iTunes account, but not mine, so I know we installed it correctly. I logged out of iTunes on my computer and back in, and turned off Home Share on my computer and back on...nothing works. Any ideas? Thanks in advance.

Now iphone 5 not working?

Home Keys on Laptop not working sometimes

Good Day,
Our HP Pavilion G4-2013TX's keyboard acts up sometimes. The Home keys (i.e., A S D F J K L and semi colon) keys sometimes do not work. I just have to wait a bit or furiously press them to get them to work again.
The keys are working currently (this message is evidence.) I don't know how to invoke the error at the moment.
Please help. I've been getting instances that I need to have a good working keyboard but the homekeys don't cooperate. A Sort of troll, actually.
Thanks in advance,
Matt

Hi @MattFromPH
Welcome to the HP Support Forums!
I understand that you are having trouble with your keyboard behaving intermittently. I am happy to help with this.
As a start I include the support page for your notebook, which includes the current HP modified drivers for your notebook, and also I link the service manual, which can be helpful when it comes to cleaning if followed carefully.
HP Pavilion g4-2013tx Notebook PC
HP Pavilion g4 Notebook PC - Maintenance and Service Guide
With those two resources, then check out this page and see if anything helps with your problem.
Notebook Keyboard Troubleshooting (Windows 7)
Cleaning your Notebook PC
Let me know if you need any more help.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Home sharing for iTunes not working between my Windows 7 and Windows Vista?

I have a HP laptop with Windows 7 on it. The laptop has the latest edition of iTunes. My desktop computer has Windows Vista and iTunes 9. When I turn on home sharing, the library on my Windows 7 appears under 'Shared' on my vista. However, the library from my vista will NOT appear on my laptop.
I have turned the home sharing option on and off multiple times on both computers. I've also edited the preferences for the 'Sharing' option to make sure that both libraries can be seen and shared. Yet it still isn't working. I have even tried restarting my wireless router and it STILL is not working.
Is anyone else having a similar problem or know how to help?

In the course of your troubleshooting to date, have you also worked through the following document, Dea?
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

Satellite L300-11G XP (Home Poland): Hibernation is not working

Similar Messages

Maybe you are looking for