Satellite L300-139 won't boot

Hello!
I got a "Satellite L300-139" a couple of years ago. It came with windows vista but no recovery cd (hence, i guess there should be a recovery partition in there?). I do not have a recovery CD for it, probably shoudl have burnt one though I did not...
The problem is that it cannot start windows, or even find the Vista installation. So what I did was I tried to install windows XP Pro (already had original cd since earlier). But it seems that installation won't work either, though at least it can be seen in advanced booting alternatives.
I have read about pressing F8, 0, et.c. and form there choose recovery/repair but there is no such option on the screen. I can choose "Safe mode", "Safe mode w command line", ... , "Start Windows normally" , "Use the latest working configuration" and those usual ones et.c but no option about resetting/restoring/recovery.
So, what happens when I choose any alternative is that I get to choose in the list of OS:s, which contains only windows xp.
Upon choosing this, either it tries to continue installaion of windows xp and I ahve to restart it, or bluescreen stop0x0000007B which has to do with faulty installation.
It seems the installation of XP did not work out very well, but shouldn't Vistra be visible as an option in the list of OS:s? Is it possible to reset my laptop to factory settings (or some other kind of reset/recover to make it work properly again)?
Is buying a recovery CD likely to fix this? Buying a 30+ euro CD to fix a 3-4 year old 300 euro laptop seems kind of expensive if it may not even help...
Any downloads or suggestions at all?
Any help is appreciated!
thx in advance!

Yours would appear to be a European model, perhaps from Denmark:
Satellite L300-139 Specifications
Satellite L300-139 Downloads
Yes, it would seem that your HDD drive did contain a recovery partition. You can read up on this on page 3-8 (56) of your L300 Series User Guide, that I have attached to this post, and how you could have made a set of recovery disks on page 3-9 (57). However, after the XP installation attempt, if not before, you have may well have deleted or corrupted your recovery partition.
If you can no longer run the recovery utility from the hard drive, I would strongly recommend paying put for the recovery disks. Running these will return your unit to its factory default, out-of-the-box state, install all Toshiba drivers and utilities, and originally installed software. In addition, it will rebuild your HDD's recovery partition. This will save you a lot of grief in trying to manually reconstruct your system in Vista or XP.
Ordering Recovery Media
But, it's up to you. Let us know what you decide, and if you need anymore help.
Mike
Attachments:
SPR6L300VEN0.pdf ‏6837 KB

Similar Messages

Satellite L300-055 won't boot windows

Hi,
I have a satellite L300-055 laptop that fails to boot up.
I shut it down one night and the next time I turned it on it wouldn't boot. It goes to a black screen with the following error message.
\Boot\BCD
Status OxcOOOOOOf
An error occured while attempting to read the boot configuration data.
It asks me for a recovery disk, but stupidly I didn't make one. Is there anything that can be done to recover the system?
Any help would be appreciated!
Jen

Satellite L300-055 (PSLB8C-055019) with Windows Vista Home Premium 32-bit
-------------------8<------------------- <snip> --------------------
If you can reach the recovery environment, Jen, there are lots of things to try.
Turn the computer on and immediately press and hold the F8 key.
On the Advanced Boot Options menu, choose Repair Your Computer.
When you reach the System Recovery Options menu (the recovery environment), choose Startup Repair.
If that doesn't do the trick, go back to the System Recovery Options menu and do a System Restore.
Let us know how it goes.
-Jerry

Re: Satellite L300-1AS won't boot

HI all,
My L300 will now not boot (windows (Vista).
It displays a blue screen stating windows has been shut down and to check the installation of any new hardware or software.
There is no new hardware or software. It suggests disabling bios memory options (I don't know how to do that) and suggests starting in safe mode to remove or disable components.
The laptop will NOT start in any mode let alone safe mode, the repair mode brings me back to the blue screen as described.
I purchased a Toshiba recovery disc (Only one disc arrived?) which begins its process then either locks at ' select a language to proceed' or detects an error and requests i 'press any key to continue' which I do, it then displays X:\windows\system32> with the flashing cursor at the end of > and does nothing more, its been like that for 5 hours now...am i supposed to type something in or am I looking at a new hard drive?
Any suggestions for a numpty greatly appreciated (apart from leave computers alone you numpty obviously!!)
Thansk
Colin

I have now tried booting the unit with both modules separately, 1 module at a time in both the slots i.e. swapping them around, and still the blue screen. A friend checked the hard drive to see if he could retrieve anything but he said it went 'click'. Having listened to all you guys have said, and actec on your advice, (the fitness test didn't work at all), and the fact that I lost the screen completely at one stage, i'm inclined tio think this laptop may have filed its last program.
Do you think it's worth buying or trying another hard drive before I throw the towel in?
Colin

Satellite A205-S5804 won't boot.

My computer Satellite A205-S5804 won't boot.
It won't run on safe mode, and it won't run the system restore.
It remains black with a cursor, if anything at all.
How do I get my computer back on?

Hi
Youve got a cursor which is flashing in the upper left corner?
In such case you should check of the HDD has been recognized by BIOS!
If the HDD is listed in BIOS then I would recommend checking the HDD using the drives fitness test:
http://www.hitachigst.com/hdd/support/download.htm
To run the drives fitness test you must download the appropriate creator or image and create a self-booting media.
Check it!

Satellite L40 18P won't boot anymore

Hello folks,
my Satellite L40 18P won't boot anymore. All I get is the Power LED to go green. The DVD ROM drive blinks and I can open and close it - but that's it. Nothing else happens.
Any idea in the forum what I can do to get the notebook boot again ? Or please ask questions for additional details.
many thanks, Johi 13

Hi,
wow, that was fast.
No, I can't see anything - the screen stays black. I do not hear the HDD start, neither do I hear the fan.
This behavior appeard for the first time yesterday evening.
Last activity was (if I remember correctly) closing the lid and sending the notebook to standby.
So far, I haven't tested it with an external monitor.
thanks, Johi13

Satellite L300 laptop won't load Windows

I have a Satellite L300 model number PSLB0A-00L022 running windows Vista.
The problem is that it won't load Windows. It starts ok and I can access the boot manager and the setup utility and that's it. It just stops loading.
After researching the problem I ran a drive fitness test and the result was error code 0x70. After looking up the code Im under the impression that I need to erase the disk. I have no problem with that.
My question is - if I run the windows recovery wizard will it fix my problem? Will I have to re install vista at all? Any advice is appreciated!!

Hello Jane and welcome in Toshiba forum
After reading your posting I must say that best and easiest solution for you is to reinstall operating system using original Toshiba recovery DVD. This DVD contains operating system, all necessary drivers, Toshiba specific tools and utilities. After recovery image installation you will have out-of-box state and clean preinstalled OS.
Yes, this should fix your problem. Please note: when you do this all saved data will be deleted.
Do you have some important data saved on your notebook?
If not use this disc reinstall Vista and everything should be ok again.

Satellite L40-139 won't start

?02-19-2014 06:41 PM - edited ?02-19-2014 06:45 PM
Hello, i have a problem with SATELLITE L40-139
the thing is when i press power button, hard drive diode starts to flash, diode on cd-rom is lighted and the screen is black. I noticed that electornics in the CD-ROM makes a sound tick in the same way the hdd diode flashes (when it flashes i hear a tick form cd-rom, yes i unfolded whole notebook).
I can only say that i connected HDD to my PC and it's working., well fan isn;t working too but i think it will start, after some time (like always it did)
Now lets say about notebook crash circumstances: That was a year ago, it fell from 1 inch (such height ;]) i saw that ribbon cable that was connecting touchpad to the mohterboard was broken, and my computer diidn't start, i thought theres a problem, but i forgot about it and left the notebook for over 9 months (with disassebled hdd, cd-rom and battery) then i decided to try to switch it on.
And viola! it works it boots etc.
So after a month of being happy i got drunk that i couldn't sit on chair and i decided to lie with my laptop on bed, i just lied down and put notebook on my stomach and it crashed (freezed screen) i decided to reboot it, but it won't start.
Heres a video with what i get during powering it up: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not luckily my phone fell into mud and lags when i record videos)
Some people suggested that i should connect external display to see if theres any image, but the result is still the same. (Screen does not even power on)
Maybe someone could help me fix it without sending it to customer service.
Cheers.

Hi
>So after a month of being happy i got drunk that i couldn't sit on chair and i decided to lie with my laptop on bed, i just lied down and put notebook on my stomach and it crashed (freezed screen) i decided to reboot it, but it won't start.
I think the notebook overheated or something like that
Maybe its just an RAM problem and therefore it would be useful to test the unit in connection with new, tested RAM modules but this is only an idea
As Dr.Lamp already said, in worst case it might be a motherboard problem and this would mean that notebook fix would be a costly affair.

Satellite Pro A10 won't boot up - Where to get the disks

I have a Satellite Pro A10 which currently won't boot up Windows (XP) as it says
The following file is corrupt or damaged:
C:\Windows\System32\Config\System
The Tools & Utilities CD-Rom which came with my laptop has unfortunately been scratched and won't boot.
I have the two System Recovery Disks, which are fine.
My questions:
1. Is it possible to purchase a replacement Tools & Utilities CD-Rom?
2. If so, where from?
3. Is there a way of restoring my laptop without having to completely reinstall everything and lose all my files?
Thanks
Message was edited by: Stuart_2007

Regarding the point;
a) Usually it should be possible to order the Tools & Utilities CD-Rom but I ask why?
b) You can purchase the CD from the ASP in your country
c) The older recovery CD supports an expert mode. You can use this mode to choose the partition where the OS should be installed. In such case only this partition will be formatted.
But listen dude. You dont need to order the Tools & Utilities CD because on this CD you will find only the Toshiba drivers which can be downloaded from the Toshiba page too.

Satellite L850-161 won't boot from recovery disk

When I got the laptop in 2012 I created 4 recovery disks but since then i've had my HDD replaced in my SATELLITE L850-161 but it has the recovery partition with nothing in it and the laptop won't boot from disk either so I can't format it but really need to, any suggestions??

If you have 4 recovery discs be sure you start installation with disc number 1. After HDD exchange you should be able to use created recovery discs for recovery image installation.
Does some other bootable disc starts properly?
To be honest I dont understand how new HDDD can contain recovery partition that will be created if recovery image installation works.
Problem is that in such situation you dont have many options. In worst case you can order original recovery disc for your machine.

Satellite Pro A10 won't boot (HDD seems to be missing)

Hello, I hope someone can give me some advice on this problem: I have a 2 year old Satellite Pro A10. Recently it won't boot at all and I notice that if i look at the directories in the C: drive using the command prompt it says 'file not found'. Can't start Windows at all, not even in Safe Mode.
Using the recovery disks doesn't help either I get messages like No such fixed Disk and 'Extraction Failed'.
does this mean I have:
1 A damaged hard disk
2. Faulty connections to the HDD? - if so how do I rectify this?
the system didn't crash before this happened, it failed to load up when I started it.
Would appreciate any help.
Thanks,
Scl

Jeffery and Ivan25 are correct in HDD malfunction. Try and remove and reattach the HDD and see if BIOS sees the HDD. If not you are going to need to order a replacement HDD. If BIOS does not even see the HDD then you wont even be able to install any Operating system, because there is logically nowhere to store the data being copied.
Take it to an Authorized service provider near you to have it checked out. Could also very well be the HDD Controller on the Motherboard has went bad and can not detect any HDD connected to the motherboard even if it is new and unused.

Satellite L300-1G9 does not boot in safety nor normal mode

Hello,
My computer will not load up from safety mode nor normal mode.
Although Macafee, my virus protection software provider believe their recent problems are to blame they have offered no solution and instead have asked me to load windows with my 'installation disk'.
I cannot find this, where do I get it from? (p.s. my computer is the Satellite L300 - 1G9 series.
Many thanks in advance.

Hi
If you are not able to boot up the Windows then try firstly the HDD recovery option:
http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
If this will not work then you need the recovery disk which you could order here:
https://backupmedia.toshiba.eu/landing.aspx
Greets

Satellite L40-139 can't boot from CD

I have a Toshiba Satellite L40 - 139 that comes with installed vista!
A month ago i installed XP and it was working ok!
Yesterday I needed to reinstal XP and i choose clean instal from cd and in a process of installing I pressed the button to open dvd drive and end it!
Stupid mistake! From that point if i try to boot Windows from a dvd drive and the process stops at: checking your hardware configuration! - and blank screen!
Nothing happens!
What can i do?
Evrything else seems to run ok!
It's not problem with dvd drive because it reads a recovery CD for vista!
Please help!!

Hi
To clear the MBR, boot from the XP cd and go into the Recovery console (Repair). In command prompt type the following:
fixmbr (new master boot record creation)
fixboot (incase you get message cannot find ntldr)
bootcfg /rebuild (incase the boot.ini is damaged)

Satellite P775-S7375 Won't boot up

Hello,
I have a fairly new (about 4 months old) Satellite P775-S7375 that suddenly won't boot. When I press the power button, the lights light up and I can hear a fan run for about 3 seconds, then it shuts down.
I have tried pulling the battery, and power cable out, pressing the power button for 60 seconds, putting the power cable back in - same result.
I tired the above, but with putting in a fully charged battery instead of the power cable - same result. This laptop is not even getting to the intal spalsh screen or BIOS screen. It's literally turning itself off after about 3 seconds.
Any idea on what I should try or is this a dead laptop needing to be sent back to Toshiba for service?
Thanks!

It was the motherboard. I shipped it back to Toshiba and they fixed it. Unfortunately for me, their quality control is awful and they forgot to reattach the DVD drive to the case. A tiny screw is missing. So now when I eject a CD/DVD the whole drive slides out of the bay.
After spending the better part of an hour on the phone with the support staff (which involved me being transferred to a number that was no longer working, then being transferred to a repair depot phone that said their hours were M-F 8am-8pm EST and oh, they're closed right now even though it is 11am on Monday???), I have to ship the laptop back across the country so someone can put in a $.01 screw and ship it back across the country.
I've learned my lesson about Toshiba.

Satellite C870D-12F won't boot Win8

Hi
My Satellite won't boot (windows 8) anymore, and I'm also not able to reset to factory settings.
The harddisk is still ok if I put it in another PC I can see all the partitions.
Does anyone sees something wrong in the partition type or properties?
Thanks in advance for any help.
Kindest regards
+Message was edited: part of the message has been removed+

Hi All
No help was afforded ,so I fixed it myself!! And WITHOUT the recovery medium.
I installed windows 8.1 again from a downloaded iso (I didn't had a key for this version).
Now I had an unregisterd windows running but "Recovery back to Factory setting" was still not available.
But I was able to get the recovery partition to be recognized again with this procedure
I downloaded Visual BCD: In here I check alt the path's in the BCD store and especially if the GUID of the "Windows Recovery Environment" is the same as the one used for "recoverysequence" in your "OS loader". You can also get here the WinReBCD id (GUID), you will need this in ReAgent.xml
A GUID looks like this: {ecca5163-d630-9447-a175-fc367f40a9e5}
Second thing: check in c:\windows\system32\recovery\Reagent.xml that
WinReBCD, ImageLocation, PBRImageLocation, DownlevelWinreLocation and OSInstallationLocation are pointing to the right "path, GUID and Offset".
+In my case ImageLocation, PBRImageLocation and DownlevelWinreLocation point to partition 1 (first on).+
+OSInstallationLocation points to partition 6 (last one)+
+example:+
+<ImageLocation path="\Recovery\WindowsRE" id="0" *offset="1048576"* guid="{ecca5163-d630-9447-a175-fc367f40a9e5}"/>+

Satellite C655-S5128 won't boot up

Satellite C655-S5128 shut down due to low battery before we could get charger plugged in. Now it won't boot up. It's stuck on the Toshiba logo page that also says to press F2 or F12 for setup/boot options. There's also a faint beeping sound we've never heard before. After a while of pushing buttons an error message popped up stating no bootable device can be found. Any suggestions are appreciated.

Satellite C655-S5128
Let's try a proper system reset, and see if this helps bring your laptop back. Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, when you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, then try to boot into Windows again.
Let us know what happens. Good luck.
Mike

Satellite L300-139 won't boot

Similar Messages

Maybe you are looking for