Satellite L300-145 - BSOD appears if I install 4GB RAM

Hi all
i have this Satellite L300-145 PSLB0E-03601LPT and I want to install 4GB RAM but when I install 4GB on SO boot BSOD appears.
I try to change with other brand memorys with equal modules, I try to install Windows 7 64bit, Linux 9.10 64bit and it the same things. I try also to update BIOS but it the same.
I think it is Remap memory feature on bios but doesnt have that option.
So what i need to do?
My laptop have now 3GB
CPU: T2390 1,86Ghz 533Mhz
CHIPSET: GM965
RAM:2GB DDR2 533Mhz
HDD:Hitachi 200GB
After upgrade
CPU: T8300 2.4Ghz 800Mhz
RAM: 2GB DDR2 667Mhz
HDD: Seagate 7200.4 250GB
I realy need 4GB

Im sorry i confuse with other chipset.
But if i can get 800Mhz and 3GB 667Mhz Dualchannel its very good.
But i dont understand the BSOD.
This is my test:
1) I install 3 difrent 2GB modules and i get the same BSOD on boot OS, but i can enter on bios and i can see on memory info. 4096MB.
2) I try to instal 3GB and laptop boot well but i find one problem if i put Bank0:1GB and Bank1:2GB laptop boot ok but if i swap i get the same error BSOD.
I think one slot cannot address 2048MB of size.
If i install only 2GB on that slot i get the same BSOD.
I have 3 tips of ram
2GB 533Mhz 667Mhz and 800Mhz with difrent brands and chips.
why i this BSOD only appears on boot OS and i can enter on bios without a problem?
Sry for my poor english
Best regards

Similar Messages

Satellite L300-16L - BSOD with new RAM modules

Hi,
I have got a Satellite L300-16L and am getting the same problem.
Got 2 x 1 GB Dimms standard and ordered 2 new 2GB Dimms. If I put the 2 new 2GB Dimms in I get the BSOD, Memtest also crashes as soon as it begins testing. If I place a 1 GB Dimm in the lower slot and a 2GB in the other windows boots fine, If I try to put the 2 GB in the lower slot and the 1 GB in the higher one it BSODs.
But If i put either 2 GB in on the lower slot on its own windows boots fine, mem test also can test both 2 GBs individually and says there are no issues.
Any ideas anyone? My laptop is supposed to support 4 GB I am sure of it.
Thanks
JJ

Who knows the point is that you got BSOD using new modules.
This means that modules are wrong or not compatible!!!!
So even the notebook would be able to handle the 4GB RAM, the BSOD is related to these new modules.
This would mean that you would have to use adn test other modules which are 100% compatible with this notebook
But as suggested by other users, the chipset is not 4GB capable! Therefore you will be not able to use 4GB RAM.

Can I install 4GB RAM in an Satellite A200-1VP?

Bought an A200-1VP a couple of weeks ago and think it could benefit from a bit more RAM. I am aware that under vista 32bit I won??t be able to access all 4GB but whatever I could gain would be a bonus (3.5Gb?) can 4GB be installed in my notebook without any problems?
And just out of curiosity is the processor upgradable? Highly doubt id end up doing it but would be nice to know?
Hope anyone can help
Thanks
kharm

Hi
You can install 4Gb on that machine it may only recognise around 3.5gb due to system resource requirements,
It takes 2 x 2gb 667MHZ SODIMMS
Like here
http://www.kingmaxmemory.co.uk
Message was edited by: ADMIN

Problems with Installing 4GB RAM on mid 2007 iMac

I ordered 2 X 2GB sticks of PC2-5300 DDR2 SODIMM RAM for my Boss's mid 2007 iMac from Crucial.com. Well they arrived a few days later and today I have been trying to install them for a few hours now without any luck. I have installed new RAM about 5-6 times without any problems before on different MacBooks and iMacs. After this install I plugged back into the wall and hit the power button, the iMac made a little noise (internal noise) then nothing, just a blank screen. I thought maybe the RAM was bad so I inserted 2 other chips (we ordered 4 X 2GB to upgrade 2 iMacs) and still no luck. After making sure the iMac would boot with the old RAM (which it did), I tried installing 1 X 1GB with 1 X 2GB and it booted up perfectly. I did this with all four 2 GB RAM chips to make sure they all worked and they did. Each time I successfully booted, I went to the system profiler to make sure it recognized 3GB of RAM and it did. So my question is why is this mid 2007 Aluminum iMac not working with 4GB of RAM, but it works perfectly with 3GB? Thanks in advance, sorry for the long question.

+It seems to me that it is not just a problem with the RAM but with the imacs themselves.+
How does this make any sense when one considers that Apple successfully specified, produced, sold and delivered all three iMac (mid 2007) models with an optional 4GB of RAM pre-installed?
In addition, Apple has, without issue, sold large quantities of that same RAM online and over-the-counter for customer upgrades. Much of all that 2GB, and the latest 4GB RAM, as usual, has been manufactured by Micron, the publicly owned U.S. manufacturing company parent of the Crucial direct sales division. The same type of RAM was also being provided to Apple by other manufacturers.
I received my two orders of upgrade RAM from Micron/Crucial even before I had purchased my 24-inch iMac, and it's worked great ever since I installed it. I also installed the second half of that order into my current MacBook, purchased a month after the iMac, and it's also been working great ever since. These are certainly superior Apple products.
Obviously there has been a change in RAM manufacturing design at Micron, probably due to their change-over to the costly, challenging high-tech 50nm and 40nm manufacturing technologies, and it is nothing more than Micron's problem.
Message was edited by: myhighway

770T-C45 Maiboard - blue screen error when installing 4GB RAM

Greetings,
I bought the MSI 770T-C45 mainboard to replace my older mainboard (ASUS M2N32 SLI Vista Premium). The problem is that the MSI board resulting blue screen when i install 4GB of RAM. First i thought maybe because of the BIOS. The same problem occur after i flashed the BIOS with the latest version using MSI Live Update. Here are my current PC information:
AMD Athlon II X2 X245 - 2900MHz (overclock to 3487MHz)
MSI 770T-C45
1Gb OCZ Gold PC6400 (3 sticks)
PowerColor ATI HD4870 1Gb Stalker Edition
Hitachi SATA2 250Gb
Vista x86 SP2
CoolerMaster extreme power 550Watts
I wanted to use Vista x64, but since my board can only support 3GB of RAM, so i use vista x86 instead.
Could anyone give me some suggestions? It is a waste to not fully use all the DIMM slots.

Quote from: Svet on 21-March-10, 10:15:34
remove the OC
unfortunately the problem occur before the OC.. i just did the OC yesterday..

Installed 4GB ram, but comp only reading 3GB?

I just upgraded my 2.4ghz MBP from 2 to 4GB ram (Kingston DDR2-667 2x2GB cards). The computer reads all 4GB (in the system profiler), but when I open a program like AFTER EFFECTS, it's only using 3GB.
Any ideas why or how to fix the problem? Of course I got the extra ram specifically for programs like AFTER EFFECTS and FINAL CUT, so it'd be nice to know that i'm getting my money's worth!
thanks!

The computer reads all 4GB (in the system profiler)
So you DO have 4 GB RAM installed OK.
when I open a program like AFTER EFFECTS, it's only using 3GB.
Not all your RAM is available for an application to use; your video chip, for example, uses your system RAM.

Satellite L300 (PSLB9A) - No internet access after installing Vista SP2

Just upgraded my Vista with Service Pack 2 and found that I cannot connect to any internet sites, have proved it is SP2 by rstoring to prior SP2 and all is OK, also reloaded the OS with my recovery disks and all works OK...... ....until I load SP2 then when I try to access the internet I cannot, getting "IE cannot display the webpage".
Diagnostics report no problems found. This happens with either IE7 or IE8, firewall is disabled and I can reach any network device including my server but am unable to load the server web page, same issue..
Any assistance would be appreciated.
Pete

Hi Sascha
Yes I rolled it back to SP1 last night as I could find no way to fix the problem, I've never seen this before. Anyway all now works OK with SP1, before I rolled back I also rolled back IE8 to IE7 (no change) and removed, one by one the updates post SP2 install (also no change), as soon as I had rolled back to SP1 all worked fine, can get instant internet. I am going to load IE8 tonight and see if that works OK.
As for Skype MSN, no did not try those while SP2 was loaded, should have tried my skype account.
Any thoughts?

Satellite L300-145 (PSLB0E) - graphic card, LAN and WLan missing

Hi,
I've recently reinstalled windows Vista Home Premium but now I have some drivers missing.
The graphic card and both Lan and WLan are missing.
I've download and installed both Lan and graphic card controllers but i can't find the right WLan.
The problem is that, the USB Wlan card is not reconnized and is showing as "Unkown Device".
I looked under the properties inspector and i found that product id shows 2 values: USB\VID_0BdA%PID_8197&REV_0200 and USB\VID_0BA&PID_8197 and is found at Port_#0006Hub_#0007 also, under name of fisical object i find it to be \Device\USBPDO-9.
I'm not totally sure that this is the Wlan card but since is the only thing that's working correctly i figure that's it. I've tried intel, antheros and realtek drivers, allways reinstalling the previous one so no conflicts would happen, but still nothing happens and windows still doesen't reconnize itm so
Please, what's the card name and where can I find the RIGHT controller for it?

Hi
First of all you really get all drivers for your notebook on the Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
The drivers are pretested so I can not imagine that none of them are working.
On this website http://www.pcidatabase.com I have searched for this vendor ID but I cant find anything. Only with the device ID 8197 it shows a Realtek WLAN card so I suppose you have to use this driver.
Please check it again!!! Make sure that you have installed SP2 at least and before you install the WLAN driver again, remove all other versions and clean the system using CCleaner.

Can I install 4GB RAM in my Satellite A100-033?

I have a Satellite A100-033 (PSAANE-03J02GEN). The manual says that it will support only 2GB RAM maximum. Does anyone know if it will in fact support 4GB? I have installed 2x1GB instead of the supplied 2x512MB, and am tempted to install 2x1GB? Will this work, or is there some restriction in the motherboard or BIOS which means that the larger RAM won't be recognised? Can anyone help?

Thanks. I agree that the fact that my laptop's specification says "2GB maximum RAM" is a bad sign, but I have found in the past that specifications aren't always completely accurate, which is why I enquired.
My processor is a 1.6GHz Intel T2060. A check on my laptop (by the program "Belarc Advisor") says that my motherboard is an Intel Capell Valley (NAPA) CRB, and that my BIOS is a Phoenix 6.00 07/12/2007. Is there any way whereby I can find out if this combination will in fact recognise 4GB of RAM?
I know that 4GB only yields a little over 3GB usable RAM, but I would still like to increase the amount of RAM which I have, if this is possible, but obviously I don't want to spend money on 2BG chips which then don't work in my laptop.
Any suggestions gratefully received!

MacBook Pro late 2011 crash after install 4GB ram

hi.,
im using Macbook Pro 13inch late 2011 i7, problems begin when i change my RAM to 4GB x 2,
the situation happen as per link:
http://www.youtube.com/watch?v=397oUWdcL3U
how to solve the issue.?
thanks..

Not according to the RAM specs you posted.
Includes one 4GB module of 1333MHz DDR3 Desktop memory for select iMac's
Works with imac intel core i3/i5 21.5 inch and i5/i7 27 inch

NB100 - Can I install 4GB RAM?

I have read there are 4GB 200 pin memory modules availables. Does anybody know if toshiba netbook supports it?
I have an nb100 but don't mind to move into a nb305 if this supports instead the nb100

I will try to be more specific
a) NB 100 has only one slot available for memory upgrade. Does it support 4gb? Processor atom N270.
b) NB 300, I am not sure how much memory slots it has. Does it has 2? If it is one, again question about 4 gb. Processor N450.
I am not asking for games, it is only for mail and office app. I use vpn client and many windows. Time the system is very slow and maybe more memory improve performance.
I like this type (netbooks) of device. It is very greatfull if you move a lot of, as me. At my office I have a large lcd for more comfortably work.
Intel page http://ark.intel.com/Product.aspx?id=42503&code=Intel%c2%ae+Atom%e2%84% a2+Processor+N450+(512K+Cache%2c+1.66+GHz)
says depends on memory type...
add intel link

Since I installed a printer software Satellite L300 has stopped working

Hello there!
I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
when i load it up it goes to Windows error recovery:
'windows has failed to start.a recent hardware or software change might be the cause
if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
then it gives two options: Launch startup repair (recomended)
start windows normally
==========
-so i click launch startup repair (reccomended)
-then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
========
5 years ago Report Abuse
Additional Details
so i just click 'next'
========
then i have 5 options:
-startup repair
-system restore
-windows complete pc restore
-windows memory diagnostic tool
-command prompt
==========
startup repair says it cannot manually fix any problems
-system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
-windows comple pc restore says i need to insert a backup disk which I dont have
windows memory diagnostics tool says that windows is preventing this
============
but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
but i don't know where...i typed it in the command prompt but don't understand how to use it
=========
i also tried to click start windows normally but it won't work

If the problem is installed software, start notebook in safe mode and try to start system restore from there.
Please let me know which options are available. Can you roll back OS few days back?
Are some restore points listed there?

Satellite L300-1AY recovery not working

Hello,
I have a question about the recovery for a Tosihba Satellite L300-1AY with Windows Vista pre-installed.
I wanted to recover my laptop and when I pressed F8 during start-up I could choose the restore my computer.
But after that part I got a message-box (System Recovery Options) telling me that the installed programs could not start and the only option I had was press OK so the computer would turn off.
I was wondering if there was any way this could be fixed or if there's another way to recover my computer.
Thanks,
Pascal

Hi
You could recover the notebook using the Recovery DVD which you have hopefully created before this issue happened
Did you create such recovery DVD?
If not then only the HDD recovery option can be used.
For this you have to press F8 after notebook has been powered up.
Then choose Repair my Computer.
Then a new window will appear and then you could choose Toshiba Recovery.
If this procedure will not start up and if you will be not able to use the HDD recovery then you need a Toshiba recovery DVD.
If you didnt create the recovery DVD then you could order it from here:
https://backupmedia.toshiba.eu/landing.aspx

Satellite L300 - cannot upgrade from Vista to Win7

Hi,
i have a problem i bought the Satellite L300 (windows vista home premium was installed , i had to buy the windows upgrade 7 from toshiba which i did and installed with no problem at all .
But now after having to use the recovery cause i got a virus on my machine it went back to windows vista .
Now when i try to run the upgrade 7 cd it gives me a message (the model does not support windows 7 upgarde ) how could that be since i already had it on this system before ?
Can someone help me tp fix the problem or give me an explaination on why its doing that ?
thank you .

Hi
Here once again the link posted by Paolo:
+*Windows 7 upgrade: Step-by-step Upgrade Guide*+
http://aps2.toshiba-tro.de/kb0/TSB9902P60000R01.htm
You need two disks:
- Toshiba Windows 7 Driver and Software Upgrade disc
- Microsoft Windows 7 Upgrade CD
Here the whole procedure:
+Upgrade Guide with Toshiba Win7 Driver Upgrade DVD and Microsoft Windows 7 Upgrade+
1. Toshiba recommends a clean installation of Microsoft Windows Vista.
Please store all your Data to an external HDD or other storage Media and recover your notebook.
2. After this, the drivers for the upgrade can be installed. Please insert the Toshiba Windows 7 Driver and Software Upgrade disc.
This disc contains a tool which automatically uninstalls all spuriously moduls and afterwards it installs all necessary drivers for Windows 7.
While this process is running, the computer may reboot sometimes.
If any messages appear on the screen, please follow them and take actions if needed.
3. If the driver installation is completed, please insert the Microsoft Windows 7 Upgrade CD and start the Upgrade.

Satellite L300-055 - VGA output doesn't work on external TV

First I will give you my Laptop Specs: Toshiba Satellite L300-055 series laptop bought January 2009- 2GB RAM upgrade- Intel 4 Series Chipset Family
Okay, I recently purchased a wire/connector like Link: [This One|http://www.vista24.biz/ebay/tpschc/v2b27214c.jpg] and when I plug it in to my To my vga port and the other end to the tv (via RCA) and follow the instructions by turning off my laptop then turn on the tv then turn back on the laptop- but NOTHING shows on the tv.
The cable is working perfectly well. When I press fn+F5 it still only shows that no external monitor is plugged in. Do i need more drivers? Does my laptop not support tv-out. If not- is it possible to install a S-video port onto my laptop?
Thanks

Hello
Have you tested both connections possibilities? I mean the S-Video port and the Chinch?
If you have connected the laptop to the TV, shut down the notebook. If the notebook is powered off, switch on the TV and then notebook.
Then you can normally switch between the monitors by pressing FN+F5.
Furthermore its not possible to install an S-Video port on your laptop.
Greets

Satellite L300-145 - BSOD appears if I install 4GB RAM

Similar Messages

Maybe you are looking for