Satellite L300-1A3 - One key needs more pressure

Hello, I purchased 1 month ago a notebook *L300-1A3* but ,
I have a problem with its keyboard that *"T"* key needs more pressure rather other keys
+please help me how i can fix this key same as others?+

Hi
Maybe the key cap is not mounted correctly?
Usually you can remove the key caps from the keyboard
Do it carefully (dont use any force in order not to break something) and check if something prevent the button from correctly working.
If everything will look ok then I would recommend contacting an ASP technician for help maybe the whole keyboard must be replaced in order to solve this button issue

Similar Messages

  • Satellite L300-1A3 - Not 100% battery on next day

    Hello,
    I purchased recently Satellite "L300-1A3" that always working by AC electricity.
    When finish my work and turn it off, unplug electricity, but next day when start it, Battery Remaining is less than 100% (for example 97%).
    Is there any problem with Battery?
    Battery name: PA3534U-1BRS
    Unique ID: 4070PA3534U-1BRS
    Chemistry: Li-i

    This behaviour is normal and it is nothing unusual. On this forum you can find enough threads about it.
    Anyway check please follow documents:
    http://aps2.toshiba-tro.de/kb0/TSB6B01MY000WR01.htm
    http://aps2.toshiba-tro.de/kb0/TSB6B01N50013R01.htm
    There is no reason for panic. I have noticed the same on my notebooks.
    Bye

  • Memory Upgrade Satellite L300-1A3

    I have an L300-1A3 with 4Gb Ram. Running Windows 7 Ultimate 64bit. I would like to know if I can upgrade memory to 2X4Gb modules ?
    Colin

    Hi
    You can use max 4GB RAM. This means that you can use 2 x 2GB DDR2 RAM (800 MHz) memory modules.
    Greets

  • Satellite L300-0H9 - DC jack needs to be replaced

    My DC jack needs to be replaced and I'm not able to find a new one.
    I looked at ebay and some other websites, but they dont have a DC jack for L300 PSLB8C 0H901X model.
    Any idea please?
    Thanks,

    Hello
    I think you should contact an authorized service providerAll original Toshiba spare parts can be ordered there from the technicians. In my opinion thats the easiest and fastest way to get an original Toshiba part.
    You can look for ASP here:
    http://www.toshiba.ca > Support

  • Satellite L300-1A3 - Microphone is not working with Windows 7

    Hello, I have a problem with integrated microphone on my laptop.
    Mic comes with web cam chicony and under Windows 7 camera works just fine but microphone don't work at all.
    Does anybody have solution to that problem?
    Under vista microphone is working fine but I wanted to try Windows 7 on laptop and everything is working excellent except microphone.
    Regards in advance.

    Thanks for reply. Strange is that all hardware has been properly installed, i have installed drivers from: chipset including graphic and sound card, lan, wlan, camera, aver tv card in express card slot, and everything is working great, except integrated microphone. Camera and sound are installed with vista drivers and both are working well. Win 7 in general is much better for this laptop than vista, runs very fast and stable. I will rather buy external microphone, if this couldn't be sorted out, then installing vista again.

  • Re: Satellite L300-11C - Which HDD is built in?

    Hi,
    I'd like to know if the hard drive in the L300-11C is SATA or IDE. Are they of particular size or will any 2.5" drive fit?
    Any help would be appreciated :)
    Many thanks,

    Hi
    I have Satellite L300 too so I can say that this notebook uses SATA HDDs. So if you want to buy a new HDD you have to buy one with SATA or SATA2 interface. Both will work in Satellite L300.
    Furthermore you need a normal 2.5 HDD. These HDDs are designed for notebook usage.
    If you have more questions, please let us know! :)

  • Ideapad Series Tools One Key Recovery 7

    Ideapad Series Tools One Key Recovery 7
    Additional Needful Things: USB DVD Burner Slimline , a mount of DVD writeable Discs (not practical CDs a lot more) , Time approx. 2-3 hours,a big portion of patience
    Prefer this as First big operation when you bought the machine, later is possible, but not recommended.
    Note : When nessessary parts or partition moved or deleted/overwritten  it is to late... 
    Start your engine , when Windows is ready to go...
    Plug your DVD Burner in ...
    Press the One Key Recovery key on your Ideapad or click the (from now abbreviated OKR) OKR Button on screen ..
    You should see this Menu next..
    Choose Create Recovery Disc got this next Select Recovery Disc Type:
    Choose the Factory default recovery disc
    click next button brings you to Step 2 Factory default recovery disc
    Insert an empty writeable DVD ...
    after a short recognition it shows you the write speed
    when its ok ... press next ..
    be patient OKR start writing and checked the whole disc , that takes time..
    should be 3  discs  Windows 7 Starter or 4 discs when Windows 7 Home Premium
    depends on preinstalled programs configuration ..
    this procedure takes time, even on Atom based systems,from time to time it looks like machine gets hung up, but it doesnt...
    If you want a bigger sized harddrive, and / or you want most all recovered, OKR creates a bootable first disc , so you can change your harddrive... if that whole procedure is done.
    plug in your USB DVD burner , start your Ideapad.
    press F2 to get into BIOS settings ...choose BOOT set first boot to USB-DVD and exit ...
     or press F12 (Fn-F11) that provoke the Boot Device Menu, meanwhile insert your first disc that OKR create for you ...
    boot from disc..follow the instructions to recover , OKR ask you to create new partitions (or delete old)
    answer with yes ... when procedure is done , your new HDD is filled as same than the factory HDD, with one exception
    you cant rewrite with OKR ,choose factory recover disc again, when press next ,
    you got a warning, factory restore is not available...
    But that doesnt matter ,  from now on.. you can , resize or delete partitions, without have to fear,
    emergency recover via dvd is yours ...  
    Note: Factory Recovery disc creation could be done one time...
    Note: Resulted Factory Recovery could not recover the procedure to do it again ... 
    If you like that program , you can save your straightline running windows with all your work via system backup..
    and could create recover existing backup image or running system ... creates a bootable disc same as done above...
    but recreate only your windows partition itself , not the whole hdd ...
    Note: Why dont choose a flashdrive for "factory restore" ?
    Its not provided by OKR 6 / 7 to save @ other media...but you can save your personal backup on those media...
    complete HDD backup is around 20 GB .. so flashdrive size last min 32GB ...
    at this time flashdrive more expensive than, bought a USB-dvd burner plus a mount of writeable DVDs..
    Further information about One Key Recovery & more  you can found on  
    http://consumersupport.lenovo.com/Video/LandingPage.aspx?lang=en&country=id
    Info: Where residents the parts of OKR ... on 2 different partitions .. this shows the invisible content on driver partition  
    part 1 on driver partition in hidden folder/files & OKR part 2 on the "normal" invisible partition..as shown here
    thats the reason why we first fasten your seatbelts & save the whole , before you want to change move/delete/format/resize on your harddrive  
    regards KalvinKlein     
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

    hi there,
    Regarding your questions:
    1. You can try to install Windows 8.1 Enterprie (90 days trial). If that works, you can run a diagnostic on the HDD.
         - Try Windows 8.1 (download link)
         - Create Bootable USB or DVD with Windows 8 ISO
    2. You can try these steps to verify the hard drive's health:
     a. Use one of the bootable diagnostic tools below to test the HDD 
       - Lenovo Diagnostic Solutions (see Bootable DIagnostics)
       - Seatools (for Seagate / Samsung HDD)
       - Data Lifeguard Diagnostic (for Western Digital HDD)
     b. Remove the HDD on the G570 and use a USB 2.5" SATA Enclosure to convert it to an external drive that can be read on another PC. From here, you can use HD Tune or the tools above to verify the HDD's health.
       - http://www.hdtune.com/faq_1.html
       - G570 Video Disassembly (see FRU Removal)
    3. Depending on the size, brand, and specifications, check this link on how much a SATA HDD would cost.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Satellite L300 - 'W' and 'F' Keys not working - can't log

    Hi,
    I have a Toshiba Satellite L300.
    My 'F' and 'w' keys arent working, and because I have a Built-in HDD user password of which contains those letters, I can not start up my computer.
    I had a 'startup' problem a couple of months back, and what I had to do was restore my laptop to a previous date. I did this through Boot management during startup. The only thing is I cant remember how to do it now.
    I cant find any restoration disks that may have come with my laptop- so the only way I can do it is through boot management.
    So, how do you do a system restore? or is there another way of fixing this problem?.
    Please help!! :)

    Hello
    If W and F key dont work I would recommend replacing the keyboard or use an external one. In my opinion its the best choice because you also need the keys for typing letters or emails
    You can get a new keyboard from an authorized service provider in your country.
    > I cant find any restoration disks that may have come with my laptop
    I think you should read the user manual because you have to create this disk yourself ;)

  • Satellite L300 - New hard disk drive info needed

    I own a Satellite L300 and have to replace the hard disk drive. I am in Korea and went to the service center, but they only couldn't replace the disk drive because they only had them in Korean, so I have to go elsewhere to get one in English (that's what I think I was told anyway) I don't know a whole lot about computers, so I am looking for some help.
    When I bought my computer it came with Vista pre installed, therefore I don't have an installation disk or anything like that. Because I am getting a new hard disk drive, will I also need to buy Vista and install it myself?

    Hello my friend
    I am a little bit confused after reading your posting. HDD replacement is so simply and can be done by everyone and I don't understand how the service couldnt be able to do this. for this action you need 10 minutes and can be done without manuals or some maintenance manuals.
    If you want to do this alone, please follow these steps:
    - turn notebook upside down
    - remove the battery
    - near the battery you will see HDD cover fixed with two screws
    - remove the screws and HDD cover
    - remove the HDD pack by pulling on the tab attached to the pack, following the direction of the arrows
    - place the HDD pack on a flat surface (such as a desk), and remove the two black flat head screws with black head screws
    Please be careful with HDDs and do not apply pressure to the top or bottom of the drive.
    Vista OS
    New Toshiba notebooks are delivered without installations disc but recovery image is saved on HDD. When you start notebook for the first time you will see Toshiba reminder with info that you must create such disc alone using preinstalled Toshiba recovery disc creator. if you didn't create it and now the HDD is defective you have a problem. Either you must order new recovery media from Toshiba or you can use Microsoft installations disc to install Vista.
    If Ive forgot something please let me know.

  • Help needed with system recovery Satellite L300-149

    Hi
    We have a Satellite L300-149.
    Was running really slowly so wanted to reset it to factory settings.
    Did the 'press F12 when starting, put disk in' etc etc BUT have a horrible feeling that I put a disk in that actually belonged to a different Toshiba we used to use a U300.
    The 'give away' was that the user manual for the U300 is now on the desktop on the Satellite :-/
    I hoped that this wouldn't be a major problem BUT the F8 key has now disappeared making it impossible to connect to the internet.
    I looked online and read that the L300 sometimes doesn't come with a disk as the info is kept on a separate part of the hard drive so hoped I could reset it back to factory settings again but when I click F2 on start up and go to the option to restore it, noting happens.
    Can anyone please help??????

    Hi
    Forget the HDD recovery now
    You have recovered the system using another disk and this has deleted the HDD recovery image files. So this option is NOT possible!
    You are right the L300 and all other notebooks are not delivered with Recovery disks.
    The recovery disk has to be created using the preinstalled software called Recovery Disk Creator. But this is also NOT possible because you removed the preinstalled system and the files which are needed for such recovery disk are not available anymore!
    But if everything work properly except of the WLan FN + F8 key, then I would recommend to install only the Wlan driver. I think the key does not work because the right WLan driver is not installed.
    I think the Satellite L300-149 supports the Wlan Realtek RTL8187B chip.
    So install the right Wlan driver which you can find here:
    http://aps.toshiba-tro.de/wlan/?page=downloads

  • Satellite L300 and Win 8 - how to activate Fn key for touchpad?

    Hi
    How can I Activatet the Key FN+ F9 for the Touchpad under Windows 8.
    My notebook is Satellite L300 (PSLB0E).
    Any Solution for me?
    Thx

    Dont know exactly if this would be helpful because L300 is not Win 8 supported model but try to install the Value Added Package released for Win 8 system.
    Such package can be found in driver download area belonging to newer Win 8 supported notebook series.

  • EEWB: Insert New Table with more than one key field  for BP object

    Hi Gurus,
    I want to enhance Business Partner object with a new table with two key fields, one the address number and another a sequence number, because I need to save several entries for each address belonging to a determined business partner. Something as what happens in communication data (i.e fax number)for an address.
    I have run the wizard from EEWB but the only possibility that offers you is to create only one key field for the new custom table. There is something in EEWB to achieve this, two key fields for the new table?
    Another question is the following: which Badi or BAPI must I enhance to populate my table with the corresponding address number to which the data belong to?
    I mean my custom data are filled through a table control that I have allocated within the screen sequence BUA130 (Detail Address). Thus, when a new address is added to a BP and my particular table control is populated within this address I should fill the key fields from my table (address number and sequence number) when the BP were saved. So, I must know beforehand which address number the system will assign to this new address.
    I repeat the question: which Badi or BAPI must I enhance to populate my table with the corresponding address number to which the data belong to?
    Thanks in Advance.
    Regards,
    Rosa Ferrando

    Hi Rosa,
    Please go through the following links. It will help you.
    <a href="http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm">http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm</a>
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • More than one key in a Characteristic

    Hi there,
    I was wondering if it was possible to have more than one key in a characteristic?
    I have one with the main key, but then two more, and the text for the characteristic is dependent on all of these. At the moment when i run the DTP to the text table it is erroring as two of the keys are missed out and in some cases the main key has more than one text value.
    Does anybody know if this is possible, or a way to solve this?
    Cheers
    Alice

    Hi,
    well not quite sure about your issue. But normally additional key fields for a characteristic are maintained doing a compounding of the characteristic to at least one other characteristic. You can do that in the infoobject maintenance on the tab compounding.
    regards
    Siggi

  • I need to identify my Satellite L300-10Q in order to upgrade it

    Hello,
    I have an aging Satellite laptop I was considering to upgrade. Unfortunately I can't find reliable information about it. I tried to find the model in different Toshiba european websites using the automatic search, the serial number and the manual searching to no avail.
    My model doesn't appear in the support sections nor the discontinued products sections, although I cand find pretty older models in the latter.
    These are the model, part number and serial numbers I have:
    Model: Satellite L300-10Q
    Part Number: PSLB0E-00901VCE
    Serial Number: 38212076Q
    The "closest" model I've found is the "Satellite Pro L300-10P" in the Spanish website
    http://www.toshiba.es/discontinued-products/satellite-pro-l300-10p/
    It has the same hardware specifications than my laptop, the only difference I found in the description is the OS version. It seems that this model is limited to 2Gb of RAM at max (already preinstalled).
    Do you think that my device could have that same limitation? Is there any other site to look for my laptop specifications?
    I mean, a reliable one (I can find my model using Google, but the results are all prehistoric advertisements of vendors that copypasted the (who knows its origin) same information.
    Also, is it possible to replace the original HDD with a SSD? I think the interface is SATA (150 MB/s), maybe it's not worth it.
    Thank you in advance... and excuse my poor writing skills in english.
    Regards

    > Do you think that my device could have that same limitation? Is there any other site to look for my laptop specifications?
    Why you dont install some hardware diagnostic tools like Everest Home Edit or the Sandra Sisoft to get all the details about your hardware parts?
    Both tools are freeware and can be downloaded from different pages.
    Such tools help you to identify the built in parts and you could also get information about the hardware properties: i.e chipset, CPU, HDD controller (SATA), etc
    By the way; the chipset seems to be the Mobile Intel GL960 Express Chipset and such chipset supports max 2GB RAM
    http://ark.intel.com/products/29830/Intel-82GL960-Graphics-and-Memory-Controller

  • Why do we need more than one retained earnings accounts & what is the use?

    Hi FI Experts,
    Why do we need more than one retained earnings accounts, what is the precise use of two?
    I know the retained earnings account is used to carry forward the balances during the year end to the balance sheet and there by making the p&L A/cs balances as zero.
    I guess the second one is used for different valueations for example  as depreciation accounts for different valuations will have different retained earnings accounts.
    Kindly correct me if I am wrong and eloborate on the use having more than one retained earnings accounts.
    with regards
    Ramesh Y

    Hi,
    Well, separate retained earnings accounts are used for parallel financial reporting, it means when you need to report in accordance with, for example, local GAAP and IFRS or US GAAP at the same time. Several retained earnings accounts  are necessary when the company chooses account based approach for parallel reporting. (GL accounts are broken down into several groups, for example you use different accounts for IFRS valuation, for local GAAP and they are also shared accounts common for both principles.)
    m.

Maybe you are looking for