Satellite L300-1AM PSLBGE - Cannot install the graphic card driver

Hello everyone.
I have a big problem with my notebook concerning the video driver.
Yesterday i've booted my windows and put Windows Vista on it.
I've taken all the drivers from toshiba site but i've encountered a problem regarding the graphic driver.
When enter setup it starts and them it gives me an error "This computer does not meet the minimum requirements for installing the software. Setup will exit". Need to say that before the boot i had Vista also and it worked.
So can you please help me because i don`t know what do to..
i`ve tried all possibilities
Thank you very much
Teodora

Hi
I can not understand this.
The unit supports the Intel GL40 graphic chipset.
The Intel driver from the Toshiba page should be ok
In readme.txt file you can find exact the same info which has been posted by Paolo30.
1. Click "Start" then right click on "Computer" button and then choose Manage.
2. Permit the User Account Control to run by selecting the "continue" button. When the Computer Management window opens select the "device manager" icon. (NOTE: IF UPDATING DRIVER GO TO STEP 3B)
3a. Double click "Video Controller (VGA Compatible)". (Go To STEP 4)
3b. Select "Display adapters" then Double click on the graphics controller
shown.
4. Click on "driver" tab and select "Update Driver".
5. Select the following option: "Browse my computer for driver software".
6. Select the following option: "Let me pick from a list of device drivers on my computer".
7. Click on the "Have Disk..." button and then the "Browse" button.
8. Enter the directory where you unzipped the file you downloaded, and then enter the "Graphics" subdirectory. Locate and highlight the "igdlh.INF" (if 32-bit) or "igdlh64.INF" (if 64-bit). Click on the "Open" button.
9. Click on the "OK" button. A window listing all of the available display types should open. Select the display adapter that your system contains and then click on the "Next" button.
10. Click on the "Next" button. The operating system will install the driver. Click on the "Finish" button when done.
11. Click on the "Close" button and then click on the "Yes" button to reboot. The driver should now be loaded.

Similar Messages

  • Not install the video card driver

    Please help solve the problem, HP Pavilion dv6 6051-er Why not install the video card driver or a video card is burned? When I install a video card driver Radeon (TMM) HD 6770 in a few seconds during the installation screen is black and so is, download the drivers from multiple sites from off site and others, please: help solve the problem.

    that´s a strange problem.
    Maybe the agp-slot somehow is faulty since you ran into problems with booth cards.
    Have you visually check mainboard for any signs of bad capacitors, agp slot interface etc.
    PS,  seems like you do the driver install about the same order as me
    - Win XP + all updates
    - DirectX
    - Inf driver
    - Vga driver
    - rest......
    If the problems occured on a regulary basis when playing games etc, then it could be some heatingproblems or to weak psu, but that don´t seems to be the problem for you.

  • Satellite L350-159 - Can I install a graphics card?

    Hello everyone, I got a friend to check what graphics card I had the other day, as I play games and noticed that the graphics weren't fantastic. He checked it out and then told me I actually haven't got a proper graphics card!
    I'd love to remedy this, but is there any way to get into the laptop to install a graphics card? and if so, what kind of graphics card would you recommend? some are rather big, and i'm not sure they could fit. I noticed some panels on the bottom of my laptop that can be screwed off - do one of those lead to a place to put a graphics card?
    Thank for the help,
    Michael

    Hello
    The graphic card cant be exchanged because its soldered on the mainboard. So thats not possible to exchange it.
    If you dont believe it, read this interesting Toshiba document:
    http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
    As Akuma said the point is that the Satellite L series is not designed for gaming. I have a Satellite L300 and a Qosmio X300. The Satellite L is really great for my work, picture editing, E-Mails and office. The X300 is really perfect for games Its fast enough for all games I have.
    Greets

  • Is it possible to upgrade/Install the graphics card in a 14-B062TU laptop?

    I have a Sleekbook 14-B062TU and I have upgraded the harddive to a msata 256GB SSD and the ram to 16GB.
    Now Can I install a graphics card/chip, if so which ones and what socket?????

    Who2 wrote:
    I have a Sleekbook 14-B062TU and I have upgraded the harddive to a msata 256GB SSD and the ram to 16GB.
    Now Can I install a graphics card/chip, if so which ones and what socket?????
    Hi,
    No, you can't upgrade the graphics chip as it's a shared Intel graphics. You couldn't also upgrade a dedicated graphics like nVidia or ATI ones as it is soldered to the motherboard. The only way how to upgrade a graphics chip on a laptop like this is to replace the motherboard by a compatible one with a more powerful chip on it. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • I cant install the graphic card on my laptob

    I CANT INSTALL GRAPHIC CARD DRIVER ON MY LABTOP I'M USING WINDOWS 7 PROFISSIONAL x64 AND I HAVE ALREADY DOWNLOD THE DRIVER FOR MY LAPTOP AND IT STILL NOT WORKING 
    THANK YOU ..
    This question was solved.
    View Solution.

    What is the error message that you get when you try to install the driver?
    Have you downloaded the right driver for your graphic card? The right driver for your notebook is mentioned in the link below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4132&lc=da&cc=dk&dlc=da&sw_lang=&product=5353​...
    Please download this softpaq and try to install this. (In case you are unable to install this in regular mode, try to boot into Safe mode, (by pressing F10 during during boot process and select "safe mode") and then check if you can install the driver.
    Also you can download and install the latest version of BIOS from the following link:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=6886537&swItemId=ob_135192_1&swEnvOid=405​...
    This should help.
    In case you still have any issues, please post your error message here.
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • Can't install a graphic card driver.

    Hi,
    I recently installed Windows XP Home Edition on my Mac succesfully and installed all the drivers etc...
    But one day, I decided to install an official updated graphic card driver from the nVidia official site. When I run the install process, it says that it can't find compatible drivers with my hardware, even though I downloaded the correct version of it ( 9M GeForce series for notebooks for Windows XP 32bit, and my 9600M GT was in the list of compatible cards)
    Maybe it has something to do with the fact that my Windows isn't really a PC or something, that it is emulated I dunno. I haven't installed an anti-virus yet, maybe it's because of that ?
    Please note that I installed Windows only to play games, so is it a problem not having the latest graphic card ?
    Sincerely.

    sometimes I wonder why respond when it is usually just to direct people to other forums, which seems to be a habit, and they would have directed you to VMware or Parallels site normally.
    I figure people do know what they are doing after a while, and don't install drivers unless they are running Windows, and I detest the "I'm running Boot Camp" which is senseless, Boot Camp is just not something you can "run" and is only a set of drivers (and services or tasks).
    Okay... as I alluded to, XP doesn't allow installing graphic drivers. Not embedded or mobility. People had to run to modified drivers from laptop2go or elsewhere. It is up to Apple etc to normally provide such drivers.
    http://www.nvidia.com/object/notebookwinxp_195.62whql.html
    And yes, IF it was a PC, and if drivers were kept current, and if you could boot into BIOS and make necessary changes.
    With Windows 7, uninstalling graphic driver in Device Manager and let Windows install its own might work.

  • Satellite M60-176: Cannot install the graphic driver

    Greetings,
    i'm trying to reinstall the original Toshiba driver from the site
    on a satellite M60-176 with mobility ATI X700 256 MB dedicated
    version is :
    <name>VGA Driver (ATI M24C/M26P)</name>
    <version>V8.121.050322a-021880C</version>
    <comment>VGA Driver (ATI M24C/M26P)</comment>
    The error message occurs when i install the software package : Setup copy dll, install some component and stop at driver installation slide with message ( translation from french ) "setup was not able to finish installation, try to configure your display adapter with standard vga one before executing setup
    When i try to detect the card with control pannel and chose the CX_21880.inf file in 2KXP_INF, the process copy the dll, but at end complains that "a problem occurs in installation of Radeon X700" and then error is "ACCES DENIED"
    I've tried to follow sequence as :
    uninstall all, go to safe mode, delete video card ( i can't set a proper VGA other card )
    I'v tried a driver removal tool ( Driver Cleaner pro ) then restart XP then try to reinstall ATI original toshiba driver : same problem
    TOSHIBA support told me to upgrade to bios 1.60 : same problem
    I can't conclude that original toshiba video driver can't be installed on a toshiba....
    Actually i'm running display with standard vga at 1152x864 32 bit color with slow rendering
    I'm really asking for help, because i don't know how to do...
    Regards,
    Ludovic

    Hello Jaba,
    of course the reinstallation should fix the problem,but the binary image will erase all my data or configuration "customized"
    I think that there was a mismatch in installation procedure or transaction...
    Now i've finally fixed it.
    Here it is how :
    I've turned off the windows logger as i've seen that registry keys were locked because wrong privileges
    I've reassigned the privilieges to current user ( ludovic )
    After , i've suppressed all driver with standard uninstall
    Then i've supressed all dll
    Tnen i've searched for ATI key in Current control set * , services , HKEY local machine software
    Then i've procedeed reinstallation => it works
    So Now i've the driver installed
    If you have the same problem, i suggest user to consult following articles :
    http://www.tweakxp.com/article37536.aspx
    http://www.rage3d.com/board/showthread.php?s=&threadid=33606840
    Hope it will help.
    Regards,
    Ludovic.

  • Satellite A300D-15B PSAKCE - Cannot install the Win XP 64bit sound driver

    Hello all,
    This is my first post here after lurking for the last week or two, My hope is that somewhere here there is help and hence hope!
    I have a wonderful Toshiba A300D-15B PSAKCE with 4GB/O RAM, however I am suffering from some problems that the holy SEARCH function cannot solve. I use this laptop as a development box for uni/work alas...
    After an absolute nightmare with Vista32 and Vista64 I decided to go back to windows XP32, however this wont install, keeps claiming a CRC file failure after (and yes this is with the SATA in IDE mode and with an XPSP2 disk)
    I decided that I really DONT want to goback to Vista, so installed Windows XP64. Now the initial Instal goes very easy, I have the basic setup, the chipset, graphics, network, processor, usb, pretty much the basic... except... and this is where I have lost most of my hair.... SOUND!
    Firstly attempting to install the sound driver results in Failure, claiming the mmdriver.inf cannot be found or corrupt, obviously I checked, and yes there it is, for the sake of it downloaded the MMDRIVER.INF and placed it system32, and still the install fails.
    I have also tried a "Manual Install", from the .inf files... this includes the XP32/64 drivers and the Vista 32/64 bit drivers, still the same
    problem, driver continues to fail install. I am becoming increasingly bald. Outstanding Drivers that WONT install
    *-Audio Device on High Defninition Audio Bus*
    *-Mass Storage Controller*
    *-Modem Device on High Defninition Audio Bus*
    *-USB Device*
    If the following is any help, (Sandra 2008)
    *-Disk Controller*
    (AMD(ATI) SB700 SATA Controller [IDE Mode])
    *-Disk Controller*
    (Toshiba SB700 IDE)
    *-Audio Device*
    (Toshiba IXP High Definition Audio Controller)
    *-Audio Codec*
    (Conexant Systems 5051h)
    *-Audio Device*
    (AMD (ATI) RV635 Audio device [Radeon HD 3600 Series]
    Now, as I write this I have heard rumor that the A305D uses the same
    audio/graphics drivers.... well.... off to try something I guess...
    if there is any help or ideas I would appreciate it.

    Thanks Jaba
    Initially I attempted to locate the MS patches you mentioned, KB835221 and KB888111 respectively, alas there were none available that I could find for XP64, also at the time of tapping this message theres no XPSP3 for XP64 bit either.
    Lucky for me I logged into my MSDN account and downloaded XP+XPSP3 tore the house up looking for a CDR... anyway long story short.... solved all the problems with the required updates of SP3, I now have my Toshiba A300D-15B all singing 'n dancing laptop setup completely with XP32.
    Had to take a hit on the RAM though, gonnna have to go on with only 3.2GB instead of 4GB,
    arguably when one counts the memory foot-print that vista ultimate 64 had used I am probalby still on a winner here in memory avaiable terms LOL!
    thanks again! much help!

  • Cannot install the XP Modem driver for Satellite Pro A200

    I'm a local network admin for Newbold College. We have new A200 laptops and we need XP Pro on some of them. I have tried to install the modem driver as one of the last drivers downloaded from the european support site. I also tried to Canadian site as well.
    The driver install program doesn't seem to do anything. I tried to manually install the driver from one of Windows modem Agse/Toshiba software modem, but I have com port issues and I can't quire the modem.
    Can anyone help me please!!!!!!!

    Hi
    What to say; I have checked the Toshiba Europe driver page and found all necessary and important XP drivers for the Satellite Pro A200.
    Please note that the Toshiba European driver page provides XP drivers for 3 different Sat Pro A200 series!!! There is PSAE1, PSAE4 and PSAE7 series.
    Please choose the right one!!!!
    Furthermore you will find an installation instruction txt file on the Tosh page.
    In this file you will find a right and important installation driver order!!! Please follow these steps!!!
    I dont know exactly why you get the modem com port problems but I assume that a new XP and driver installation should solve this strange issue.
    Good luck

  • Satellite C660 - not able to install the WXP chipset driver

    Go !
    I installed WIN XP in my Toshiba Satellite C660 laptop, and downloaded the drivers for windows XP,but I am not able to install the chipset and display drivers.
    It says 'This computer does not meet the minimum requirment for installing this software.
    Setup will exit now' .
    Can you help me,please ?

    Hi
    Notebook supports the Mobile Intel(R) GM45 Express Chipset
    Its Intel chipset so you can find the drivers on Intel page.
    Here is an Intel page which allows you to check the system for latest updates:
    http://www.intel.com/p/en_US/support/detect/graphics

  • Can not installed the Sound card driver for Windows XP SP3?(CQ40 333TU)

    my notebook model is CQ40 333TU, i downgraded from windows vista to windows xp sp3, but i can not installed the sound driver?  and i can not found the xp driver in hp web, help me.

    This might help>>>
    http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=26
    http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=230
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Satellite L300-1D4 PSLB8E - Cannot Open CD/DVD ROM Drive

    Hi, Fellow's
    So i have a problem with cd/dvd rom drive.
    After i upgraded with latest driversmy computer the drive cannot opening :( i'm doing restarts and this is the same... when i press drive button to open, it flashes orange led for two or three times and nothing happening, the drive is still busy.
    Before windows reinstalation with older version drivers worked fine, but only sometimes it wasn't working.. and now it doing nothing all the time.
    My windows is 7 x64, drivers updated yesterday. Can anyone help me ?

    > Before windows reinstalation with older version drivers worked fine, but only sometimes it wasn't working.. and now it doing nothing all the time.
    It looks like a driver update lead to malfunction. so, reinstall OS or restore OS to earlier point. By the way, is it listed in device manager?

  • How do i install the Wireless card driver?

    i have tried installing by using the Mac OS X Install dvd, but that always gives me a message that a restart is pending.  Also, i checked the device manager and it says that the driver for the Cirrus Logic CS4206A (AB 11) is not installed properly, so any idea how to fix that too? (it's for the audio)

    hippies4ever wrote:
    i have tried installing by using the Mac OS X Install dvd, but that always gives me a message that a restart is pending.  Also, i checked the device manager and it says that the driver for the Cirrus Logic CS4206A (AB 11) is not installed properly, so any idea how to fix that too? (it's for the audio)
    Have you restarted?

  • Problems with the graphic card driver after update?

    First my brand new Macbooks main board had to be replaced since I couln`t charge the battery. After 3 weeks on service it`s back. Everything is fine until I update the drivers. After the restart the screen displays totaly wrong colors. Take a look below. What could be the problem, and can I solve it?
    http://www.blog.tyrkiskpepper.com/blog_img/screen.jpg
    Thanks,
    Andreas

    Some user post that when they reset the pram and pmu and change the resolution screen to its native (biggest) resolution, it will solve the problem.
    Do some more search on discussion search column on your right upper corner.
    Good Luck

  • CD/DVD in Satellite L300 1AM in WinXP- drive runs and stops alternately

    Hello
    I have bought a new Satellite L300 1AM
    I have installed WinXP Home SP3 system (using nLite and SATA driver from Storage Manager), and all drivers from Toshiba website.
    I have problem with CD/DVD drive (HL-DT-ST DVDRAM GSA-T50N):
    -copying from CD/DVD on HDD looks like following: for some time (few second upto few minutes) data is copying; then drive slows down and stops, copying is stopped, progress bar does not move; after e.g. 1 minute drive starts to rotate and next part of data is copying. Sometimes system stops to respond and one has to reset computer, sometimes computer restarts automatically...
    -listening to audioCD music and watching DVD movies look similar, it easy to imagine...
    -uninstaling DVDRAM in Device Manager and restarting system helps a bit, i.e. time of copying becomes a bit longer..., sometimes problem occurs with next CD/DVD in drive
    -AudioSilencer do not change anything
    -writing on CD/DVD is also impossible - progress bar stops after 1-2 minutes and nothing happens. Yellow diod is still on and to stop process one has to restart system...
    What is interesting, drive works perfectly with newest Debian LiveCD version...
    Has anybody any ideas???
    Thanks in advance
    Jan

    Hi
    SATA driver has been integrated with WinXP CD using nlite - this allowed installer to find HDD and to install system :) Driver has been taken from the Storage Manager package. Later, with system installed, I run .exe from that package again.
    Do you think SATA driver should be installed somehow once again?
    In IDE ATA/ATAPI controllers I have only one position:
    "Intel(R) ICH9M-E/M SATA AHCI Controller"
    Should I have IDE Channels despite both DVDROM and HDD are SATA?
    Lars_3, I agree, it MUST be software problem!
    Perhaps something like interference or conflict between programs or drivers...
    Drastic solution is to reinstall system completely and to check the correctness of CD/DVD-reading after each newly-installed program or driver... but I would like to avoid this way as long as possible :)
    The problems occur with disks of various manufacturers, which work correctly on several other computers
    PS CD/DVDs are read correctly also under Debian 5.0.0 installed parallelly on HDD
    Jan

Maybe you are looking for

  • 10g Migration issue in forms related to graphics

    Hi.. I am facing a 10G migration issue realted to graphics in Forms. A form got migrated from 6i to 10g and it has Graphics in it but it is not displaying the graphics in Runtime after migration.can anyone help me reagrding how to resolve this Graphi

  • How to copy dialog box

    Under Safari-Preferences-Passwords, there is a list of my online passwords. How can I copy the contents of that dialog box and paste it into a printed document that I can put away in a safe place?

  • Solaris 7 ldap client setup

    Hi, Please any one can help me in setting ldap client for solaris 7 guidelines or any website or docs help. Thanking you, Naren

  • Can't find iBooks pre-order/purchases section?

    I thought I had pre-ordered a book through iBooks, but when I access my account to verify the pre-order, I don't see anything that will allow my to view my pre-orders.  It said to click on purchases, but I don't see anything titled purchases.  The on

  • IPhoto prints are muddy

    I printed the same picture, same size, same printer -- using my Macintosh (OS X 10.4.9); then using my PC. The mac print was dark and muddy and did not match the same picture on the mac monitor, which looked fine. The PC printed as in the past--color