Satellite L300 - 1FP

I have Satellite L300 - 1FP, and model number starts with PSLB8E and I can't find any downloads for it.
Is there any compatible computer?

Try the drivers here.
-Jerry

Similar Messages

Memory upgrade on Satellite L300

I purchased a satellite L300 in august 08 in Australia. It came with a single 1Gb memory module which is now inadequate.
I obtained 2 x 2Gb modules but cannot get it to work with both fitted. Bios reports 4Gb fitted but Vista reboots the first time then blue screens. Ubuntu Linux hangs after loading HAL.
If only one module fitted it works OK and it does not matter which module is used.
Any info on this would be most appreciated.

Hi
Either the chipset is not able to handle 4GB RAM or there is a compatibility issues between both modules.
This is nothing unusual and happens very often that both modules cannot work together.
In your case I recommend testing other modules.
PS: Be sure that BIOS is up to date... if it's not up to date, then update it and then test both modules again...

Since I installed a printer software Satellite L300 has stopped working

Hello there!
I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
when i load it up it goes to Windows error recovery:
'windows has failed to start.a recent hardware or software change might be the cause
if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
then it gives two options: Launch startup repair (recomended)
start windows normally
==========
-so i click launch startup repair (reccomended)
-then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
========
5 years ago Report Abuse
Additional Details
so i just click 'next'
========
then i have 5 options:
-startup repair
-system restore
-windows complete pc restore
-windows memory diagnostic tool
-command prompt
==========
startup repair says it cannot manually fix any problems
-system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
-windows comple pc restore says i need to insert a backup disk which I dont have
windows memory diagnostics tool says that windows is preventing this
============
but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
but i don't know where...i typed it in the command prompt but don't understand how to use it
=========
i also tried to click start windows normally but it won't work

If the problem is installed software, start notebook in safe mode and try to start system restore from there.
Please let me know which options are available. Can you roll back OS few days back?
Are some restore points listed there?

Satellite L300 1BD - VGA output is not working

Hello.
I have a Toshiba Satellite L300 1BD (Model PSLB8E). I was usinng the VGA output to connect to my LG tv. It worked fine until last week. All of a sudden the TV doesn't get reckognized by the laptop anymore. The TV says that no external device is connected. I have tried different things: starting up with the TV connected and not connected through the VGA cable, pressing the FN+F5 button, removing the battery and pressing the powerbutton, checked for the latest videodriver, removed the existing driver and installed it again...unfortunately without any result. I also tried to hook the TV up with a different VGA cable, but no result. It's not the TV, because i did try to hook the laptop up to a TFT monitor and it didn't work as well. Tested the VGA cable with my friends laptop: it works perfect.
The strange thing is: if i hook the TV up to the laptop, i can hear the laptop is making the 'new hardware detected' sound and the laptopscreen even turns black for a second, then everything appears back on the laptopscreen. If i check the graphic properties with the rightclick on my desktop, i can see that they are no set for 'clone device'. As if the laptop knows, something is connected, but just can't transfer the image to the TV screen.
The graphic adapter is a Mobile Intel 4 Series Express Chipset family.
The OS is Vista Home Basic (32).
It's a shame the VGA output seems to be out of order since i watch tons of video's and movies through my laptop on the TV screen. I don't know if this could be a software or a hardware malfunction. If anyone has an idea or some clue, please let me know. Thanks in advance!
Marcin.

Hi,
I would like to give my 2 cents to this post (and the answers from Toshiba):
>{quote}I have a Toshiba Satellite L300 1BD (Model PSLB8E). I was usinng the VGA output to connect to my LG tv. It worked fine until last week. All of a sudden the TV doesn't get reckognized by the laptop anymore. The TV says that no external device is connected. I have tried different things: starting up with the TV connected and not connected through the VGA cable, pressing the FN+F5 button, removing the battery and pressing the powerbutton, checked for the latest videodriver, removed the existing driver and installed it again...unfortunately without any result. I also tried to hook the TV up with a different VGA cable, but no result. It's not the TV, because i did try to hook the laptop up to a TFT monitor and it didn't work as well. Tested the VGA cable with my friends laptop: it works perfect. {quote}
> {quote}The strange thing is: if i hook the TV up to the laptop, i can hear the laptop is making the 'new hardware detected' sound and the laptopscreen even turns black for a second, then everything appears back on the laptopscreen. If i check the graphic properties with the rightclick on my desktop, i can see that they are no set for 'clone device'. As if the laptop knows, something is connected, but just can't transfer the image to the TV screen. {quote}
>{quote}The graphic adapter is a Mobile Intel 4 Series Express Chipset family.{quote}
>{quote}The OS is Vista Home Basic (32). {quote}
>{quote}It's a shame the VGA output seems to be out of order since i watch tons of video's and movies through my laptop on the TV screen. I don't know if this could be a software or a hardware malfunction. If anyone has an idea or some clue, please let me know. Thanks in advance! {quote}
I have exactly the same L300 19F with the same graphic adapter, only with Windows 7 Ultimate (32) and was watching DVD's through my Toshiba TFT TV-set/VGA Monitor for a couple of years as well as all of a sudden it doesn't work anymore. The same as the gentleman who started this thread I checked everything there is to check: my laptop/another screen, another laptop/my screen, drivers, new cable, even installed the (original and licensed) W7 OS again etc. etc. etc. TO NO AVAIL !!!
Since this is the first time that I can't solve a technical computer problem in more then 25 years I got mad and started to think what the heck I did different over the last few weeks, and now I think I know the culprit.
One day, a few months ago, I saw a warning in my screen to flash my BIOS with a new upgrade from the Toshiba website. Having seen that message for several months I did not give it much attention because everything worked fine, and the reason given for the update was a quote "password protection update" unquote, a function I don't use anyway and that's why I didn't run that fast.
After a while I decided to flash the BIOS, just to get rid of the annoying message and now I am quite sure that it really did kill my VGA output capabilities.
So, instead of the nice "Check your Power Cord" and "Go to the Official Toshiba Dealership" hints, maybe there is some technical solution. Maybe there might even be a nice technical Toshiba person have a look into the BIOS update and what the heck the differences are with the old one.
At the very least you could offer a "downdate" of the current valid BIOS for this type, because everything used to work pretty good and, as a 25 year long time customer of Toshiba laptops, I could be entitled to a little better (quality) answer.......
My friend Marcinondrums and I still have hopes.
Thank you !!
/Hans

Windows XP installation on Satellite L300 11G

Hello,
I have a problem installing windows XP on my Toshiba Satellite L300 11G.
It does not recognize the SATA HDD. SO I downloaded the files that were needed (Intel Storage....) and then I get an error: iaStor is corrupted. I am pretty new in computing so I do not know if I downloaded the right thing. Please if someone could guide me trough and give me a link to download the correct file.
And does that message come only if I fail in choosing the correct driver when asked?? Or is there something else I am doing wrong...??
Please help. I am trying to fix this for several days, and I bought my laptop a few days ago and I need it for business. I would appreciate your help a lot.
Thanks.

Come on buddy... Please dont mix everything!!!
*_Regarding the Toshiba Vista Recovery CD:_*
If you want to create the Toshiba Vista Recovery DVD and want to burn the preinstalled Toshiba image on a DVD then use the Recovery Disc Creator tool.
And YES, the user manual contains the info how to do this because Ive checked it and found the needed info!!!
*_Regarding the new XP installation_*
If you want to install the XP OS on this notebook, then you have to include the SATA driver like described by Gipsyman above!!!
The XP OS installation will format the HDD or partition and will erase the installed operating system.
Therefore it would be advisable and recommended to create the Toshiba recovery DVD firstly before installing the XP.
I think this should be clear.

Is graphic card upgrade on Satellite L300-21W possible?

Hi!
I`m thinking to buy Toshiba Satellite L300-21W but i wat to play some games on it like Cod2 but I think that her serial graphic card is weak so my question is:
" CAN I REPLACE GRAPHIC CARD WITH BETTER ONE OR NOT( and with which one if you know)!?!?!??!"
Thank you!

As far as I know graphic card on mobile computers cannot be upgraded. This is also described in follow document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
So if you want to play different games with your notebook pick up info about models with better graphic cards.
I can recommend you to check Satellite A300/A350 notebook models.
Talk with your local dealer.

Processor upgrade on Satellite L300-1BV

I've already upgraded the laptop from a T1600 (Celeron), to a T3200 (Pentium Dual Core). But does anyone know how far I can upgrade in the 478 P range of processors?
If so, could you supply the processor numbers?
+Message was edited: Model number changed in subject+

Its a Satellite L300-1BV and NOT Satellite L300D-1BV
This is big difference!
However, the Intel GL40 Express chipset supports these CPUs:
Intel Celeron Processor 575 (1M Cache, 2.00 GHz, 667 MHz FSB)
Intel Celeron Processor 585 (1M Cache, 2.16 GHz, 667 MHz FSB)
Intel Celeron Processor T1700 (1M Cache, 1.83 GHz, 667 MHz FSB)
Intel Celeron Processor T3100 (1M Cache, 1.90 GHz, 800 MHz FSB)
Intel Celeron Processor T1600 (1M Cache, 1.66 GHz, 667 MHz FSB)
Intel Celeron Processor T3000 (1M Cache, 1.80 GHz, 800 MHz FSB)
Intel Celeron Processor 900 (1M Cache, 2.20 GHz, 800 MHz FSB)
Intel Celeron Processor T3500 (1M Cache, 2.10 GHz, 800 MHz FSB)
Intel Celeron Processor T3300 (1M Cache, 2.00 GHz, 800 MHz FSB)
Intel Celeron Processor 925 (1M Cache, 2.30 GHz, 800 MHz FSB)
Source: http://ark.intel.com/products/35501/Intel-82GL40-Graphics-and-Memory-Controller-Hub

Memory upgrade problem on Satellite L300

My laptop is a Satellite L300 PSLB8A-047004. I purchased a kit of 2 x 2GB modules and inserted carefully following the instructions (they clicked into place). On restart the Power light was lit, the fan was on but no further activity, and the display remained black, no disk activity. Originally there was 1-off 1GB PC2-6400S module installed and Ive checked that the new ones are PC2-6400S. I took them out and put them back in but same result. When I put the original module back in it worked fine.
I then tried just one of the new modules in place of the original one but no luck so the original module is now back in and all seems OK.
Any suggestions please? If there was module damage from being handled then the original 1GB module should also be damaged as its the one thats been handled the most.
Kev.

This is typical behaviour by compatibility problems. Which modules you have, I mean who is manufacturer?
I recommend you to use high quality products from Kingston or Toshiba. For more info about compatible modules for your notebook visit http://www.kingston.com/worldwide/default.asp

How to connect my Satellite L300 to the TV?

Hi...
I have a Toshiba Satellite L300-2C4 and wish to connect it to my Toshiba 32HV10E plazma
The tv have a hdmi input, so I bought VGA adaptor and connect it to the computer
Unfortunately it doesnt work.
The computer can recognise the tv but not the same with the plazma
Anyone?

I agree with Tom.
Problem is that your notebook has external monitor port only and can send video signal only. Many TVs have such port but I dont know if this plazma TV has such port too.
As Tom already wrote try with VGA adapter.
> The computer can recognise the tv but not the same with the plazma
To be honest this sentence is not so clear to me.

How to connect Satellite L300 laptop to a LCD TV

I am trying to connect my satellite L300 laptop to LCD tv via VGA port. I am having trouble getting the full desktop on TV. The left hand side of the screen is not visibe and there is a black strip on the right hand side of the screen. I have vista home premium edition installed and i am using 1360x768 resolution. Could any one please help me fix this.
My satellite L500D laptop connects fine with the TV usinG xactly same settings.
Thanks

Hi
Please check in your graphic card settings if the option: Full Screen (no border) has been chosen.
This can be found in Aspect Ration Options.
Ive got a U400 with Intel graphic chip and this option is available there.
Furthermore some notebooks support an additional BIOS option where the screen could be set to full screen (no borders)

Satellite L300-29X - How to connect to television?

I have a Toshiba Satellite L300-29X with a mini-VGA output and would like to connect it to my television, preferably through the DVI-I dual analogue/digital input, but cannot find a cable that will do this. Can anyone point me in the right direction? I live in the UK and as such, only have access to UK based retailers and do not want to pay the exorbitant costs of importing from overseas.
If all else fails, I could connect through the SCART input on my TV, but again, could anyone point me in the right direction of a cable that could do this?
Cheers in advance for any help.
C
I've also just noticed my TV has a 9-pin RS232 input as well if that is any help?

OK, I think I know what I need now, obviously I've been getting myself confused somewhere.
I must have read something somewhere about mini-VGA ports and got my wires crossed, so to speak. I tried a VGA cable from an old monitor and it fits nicely, it's just that my laptop doesn't have the bits for the screws to go into, so I presume that is the only difference that makes it "mini".
Anyway, thanks for all the help guys and hopefully once I can locate the correct cable and adapter, I'll be able to watch my new star trek film boxset on a decent size screen! Good Times! :-D

Re: How to connect camcorder to my Satellite L300-1AD?

Hi everyone
I hope someone out there can help me - my problem is driving me mad!!
I have a Satellite L300 1AD(?) laptop and I am trying to connect my camcorder to it so that I can watch and edit my holiday videos. Apparently I can't use a USB cable and need an "i link" cable or firewire cable. However, I can't find where to connect it onto the PC. Also there are so many different "pin" variations.
Am I able to do this at all? I know I am female but I consider myself to be quite good usually at things like this. If you need anymore info please let me know.
Please help - I am getting desperate?? I want to see the koalas and kangaroos in Oz!!
Thanks in anticipation

Hello
Your notebook model is not known to me but if your notebook doesnt have firewire port (i-LINK) you must use expresscard solution.
It is something like cards shown on http://www.synchrotech.com/products-expc/expresscard-firewire_00.html
Talk with your local dealer. Explain exactly what you want to do and I hope he can helps you.

Satellite L300 - Wireless not working at all

Hi everyone,
Im new here and my name is Jodie. My husband and I bought new laptops a couple of weeks ago, the Satellite L300.
On my husbands one the wireless just stopped working, the switch is on but no light is on. I've tried FN and F8 is says the wireless is not working. I then checked in the device manager under netwrok adapters to see if it said the same as mine and the Wireless Adapter has vanished? It's the Atheros AR5007EG Wireless Netwrok Adapter.
Can anyone help? Can't bellieve this has happened and they are only 2 weeks old :(
Thanks Guys
Jodie

>Can't bellieve this has happened and they are only 2 weeks old
I understand what you mean but if you check this forum and all questions here your problem is not so complicated. You cannot even imagine which problems people have with notebooks. Sometimes I ask myself what people do with notebooks. :)
Back to your problem: Jodie if there is no way to get WLAN to work I recommend you to use most radical but most effective way to test WLAN functionality install OS again using HDD recovery image. After doing this you will have factory state and all hardware components should be installed properly.
Enable WLAN using WLAN switch, be sure WLAN is enabled with FN+F8 and scan the area.
It must work.

Satellite L300-1G8 - Microsoft Works Suite has stopped working

Hiya,
first of all i will say i am only on my 2nd computer so im not exactly a brainbox on them.
I have a Satellite L300-1G8 with microsoft vista home premium 32bit.
I have only had this laptop for less than 2 months today when i was using microsoft works suite, word processor it suddenly shut down, i reloaded a document that it had auto saved and then closed it.
When i tried to open another blank document it let me do it but it wouldnt let me paste on what i needed.
Now i cant seem to open anything in microsoft works and if i try i get the message:
+"A PROBLEM CAUSED THE PROGRAMME TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THE PROGRAMME AND NOTIFY YOU IF A SOLUTION IS AVAILABLE".+
What is this and why wont it work?
I have not used it much in fact i think it might be the first time. I have been on the microsoft site and its all greek to me, anyway the bit i did understand was it said "if your windows was pre installed go to Toshiba" or words to that effect.
I have been on the Toshiba site and thats all greek too. I dont understand any of it and i cant seem to find any help from them, the only help i can find is this site with all you clever people on solving our problems out for us.
So can you help, in simple language please.
Thank you. Julia :D

Hi
This is a simple generic error message that you will see always when programs or applications crash.
Something went wrong but I cannot say whats wrong with your MS works.
If you want you can check the event viewer for some errors but to be honest this will not help you a lot if you are not computer literate.
I gogoled a little bit and some people reported about the same error message in connection with MS Word but as I said above; this is a generic error message.
However, the people solve this problem only by new installation of MS Works.
Im not sure if you have received an MS Works disk. If yes, remove/uninstall firstly the MS Works from the system, reboot the notebook and use the MS Works disk for new installation.

Satellite L300- 1AQ - Bluetooth tray application has stopped working

When i put my laptop on it comes up with an error which says:
*bluetooth tray application has stopped working*
A problem caused the problem to stop working correctly.
Windows will close the program and notify you if a solution is available.
Anyone got a solution?
The laptop is a Satellite L300- 1AQ
Only had it a month!!
Please help, thankyou
xx

Hi
Did you try to reinstall the Toshiba BT stack?
Usually this should help to get rid of this error message.
Here you can download the newest BT stack:
http://aps2.toshiba-tro.de/bluetooth/
Remove firstly the old BT software from the system and after new reboot install the BT downloaded from the Toshiba BT page.
Bye

Satellite L300 - 1FP

Similar Messages

Maybe you are looking for