Satellite L300-20D shows Blue Screen at start-up

My sons laptop has recently started to blue screen. When booting up now the startup repair runs for around 15mins but finaly goes to blue screen and goes no further.
He does not have a boot disc.
Is there any way of repairing this without taking it to PC World? Laptop is arond 9 months old so still has some warranty left but PC World advise this does not cover this kind of problem.

On this way it is not possible to offer some exact explanation why this happen. What you can try is to start operating system in Safe mode. Start your notebook and press F8 several times. In Advanced boot options you can find this option.
If operating system starts properly try to roll back OS to earlier time using System restore tool.
At the end you can try to install OS again using HDD recovery option - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

Similar Messages

  • Satellite L505-13W shows Blue screen error

    My laptop SATELLITE L505-13W Shows blue screen error.
    The os gets booted up and after some time it shows a blue screen error and restarts.
    On restart it asks for repair, even after succesfull repair it showed the same error.
    So i tried to recover using the recovery cd but it proved to be a tragedy.
    It eraced my full HDD to stone age and smiled at me saying recovery is not possible.
    please help me.......

    Hi
    If the notebook cannot be recovered using the recovery disk, then all this smells like hardware problem.
    Are you sure that your recovery disk is OK?
    Did you try to install the OS using other installation disk?
    Maybe this would be useful to check if the issue might be related to the faulty recovery disk but if the BSOD (blue screen of death) appeared before the OS installation, then I would say the issue might be caused by internal hardware malfunction
    It would be necessary to check the RAM modules and the HDD.
    HDD can be checked using the HDD diagnostic software like Drive Fitness Test (freeware)
    RAM could be checked using a tools like memtest but you need a running systemso in this case you cannot check the RAM using a software I recommend removing one module and testing the notebook using one module in each slot

  • Satellite L650-10M shows Blue Screen with Twinhan Azurewave AD-SB200

    I have blue screen after starting the satellite card USB ... Twinhan Azurewave AD-SB200
    I have Windows 7 Home Premium 64 bit
    Satellite card was working on the old PC very nice with Windows XP without any problems
    After starting the satellite card with about 5 minutes from working, I become the blue screen and then Restart for Windows
    Then, I become this message:
    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 3073
    Additional information about the problem:
    BCCode: 3b
    BCP1: 00000000C0000005
    BCP2: FFFFF80002C8F805
    BCP3: FFFFF880089F6AA0
    BCP4: 0000000000000000
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1
    Files that help describe the problem:
    C:\Windows\Minidump\083010-14882-01.dmp
    C:\Users\TOSHIBA\AppData\Local\Temp\WER-47143-0.sysdata.xml
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    Please I need help fast
    Thank You

    Is this card designed to run under Windows7?
    Do you have installed proper Win7 driver?
    Sorry but Toshiba doesnt support third part hardware and software so if you have problem with Toshiba then you are here on the right place. For all other questions contact Azurewave support and ask for help.
    Thay have best experience with own product and I hope they can help you to get it work properly.

  • Satellite Pro A300 shows blue screen error 8086...

    Hi,
    today laptop produced a Microsoft error message (Didn't see what it was) and it said to restart laptop.
    On restart blue screen error message appeared. 0x00008086
    Thanks
    Paul

    Hi
    Did you get this BSOD only once as yet?
    Maybe its just a driver issue so check the device manager for any problems.
    Normally BSODs are related to RAM or HDD. You can test both components using a special test tools like Memtest86 and Drive Fitness Test. You can use Google to find both freeware programs.

  • HP Pavilion Entertainment won't start just shows blue screen

    HP Pavilion Entertainment won't start just shows blue screen. Sometimes says missing operating system after changing boot order. I have seen error message 303. This happened after I couldn't stop coolncheap popups so I saved everything to another computer and did a complete restore. When I was in the process of getting it back to working order I allowed updates recommended and optional and then everything started.

    Also pressing F11 won't take me to recovery

  • Iphone 5S ramdomly restarts, turns off itself, screen shows blue screen sometimes

    I am having problem with my iPhone 5S since Tuesday. The phone restarts itself while using like during making calls or surfing internet, the phone turns off automatically and sometimes shows blue screen. I called apple support and they told me to connect my iPhone to iTunes and they had me reset everything like factory resetting and stuff like that. After we did that the phone started working but very next day again I started having same problem, my phone completely turned off by itself and I couldn’t turned it on by pressing power button so I went to apple store at Grand Central made an appointment and I waited there like 45 minutes for my turn. I explained everything and the guy from genius bar he pressed menu button and the power button together and boom… the phone was back on. He checked the phone and says nothing wrong with the phone and I told him everything about the issues. He said if problem happens again come back and we will replace your phone as I recently bought this IPhone and is still under warranty. I came back home and again my phone started acting up…same problem you never know when your phones gonna be turned off….somebody calls you don’t hear nothing funny part is those people who are calling me says phone keeps ringing you don’t pick up. So I made an appointment today I went back to Grand Central apple store, I explained everything today in detail and told them I am using I phone since the time when Iphone 3G came in and I have other iphones too at home and none of them had this kind of problem before. I am really upset with my phone, it's giving me hard time. The guy checked the phone and said phone is working fine nothing wrong with it. Now what I am gonna do? I said please give me replacement phone ‘cause I think there is something wrong with this phone hardware, firmware whatever…He said he can’t, he thinks I am lying. Why should I waste my time going there back and forth after work when you are so tired from your job? Can anyone please suggest what could be the problem?? How to deal with this problem? Thank you
    Message was edited by: Topgyal

    Call in again and explain the situation.  Ask to speak with a supervisor.  There are things they can do to document and confirm your issue that way you can get it serviced.  Just be sure before returning to the store, you have a case number from the call where they documented to service the device.  This process sometimes takes a few days as domes the supervisors need to escalate your information to ensure an outcome in your interest.  That would be my recommendation.

  • Does Satellite L300-20D supports SATA or IDE HDD controller?

    Hello,
    I am trying to find out if my laptop hard drive is SATA OR IDE Connection, as I am buying a docking station for it Here are all the details.
    If someone can help me please, thankyou
    Model - Satellite L300 - 20D
    Part - PART NUMBER: PSLB8E-0CK00YEN
    Thankyou so much in advanced! xx

    Of course Im sure
    If you dont believe, install some kind of hardware diagnostic software like Everest Home Edit or Sandra SiSoft. Both would show you that the notebook supports SATA

  • Why can't I access my own wifi? why do I get a blue screen on start up or after watching a netflix movie, and why is it getting so hot?

    My mac has been showing a blue screen on start up and before shut down, especially after netflix. Is it silverlight? Why can't I get on my own wifi? It defaults to a linkys public network, I try to access the secure network, type my password, enter, and I get connection timeout.

    I was re-decorating my blogger .. then I got the 'Bad Request Error 400' ..  I re-formatted my computer, reloaded all .. I can now access my Blogger sites .. Don't know what the problem is/was, but I solved it by reloading my computer to Out-of-Box condition, and all is perfect now  .. I have an alert set up for this Error 400 .. Masses of people are having problems daily ..
    http://littlemisscinderellasquotes.blogspot.com/

  • Satellite M100-150 gets "blue screen" and resets bios' data

    This problem started month ago.
    Laptop sometimes shows "blue screen" for unknown reason, and constantly does it if there is some modern graphical game executing.
    After that I always note, that bios' settings were reset to defaults
    what do I have to do?

    Ok, sounds like some kind of an serious issue. Could be a hardware problem, but thats just an guess of your situation.
    Firstly you should perform a BIOS update on your machine to make sure the BIOS rom is OK.
    Then, if the problem persists, I would contact an authorized service partner, since the problem seems then more hardware related.
    If thats the case, then visit the following link to find the nearest ASP in your country. Send your machine there for an hardware checkup:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
    greetings

  • Stuck at Blue Screen on start up

    My MacBook Pro gets stuck on the blue screen at start up. Have tried all the obvious fixes but no joy.
    I put my mac in target mode and connected to another MacBook Pro
    Then selected my HDD as the start up disc, rebooted, and this worked fine, i was able to run my HDD and all software fine.
    I conclude this shows i have a hardware problem on my mac.
    Can anyone please give me a clue as to what it might be? or is it time for a visit to the apple store (and a remortgage on the house)?
    Many thanks Phil.

    I know you already mentioned that you "Tried all the obvious fixes" but this is the first thing that came to mind when I read your problem.
    Hold down the power button until your Macintosh shuts off.
    Then hold down the power button until the white light on the front of your Macintosh starts flashing rapidly.
    Then release the button and see if your device boots up normally.
    I had this very same problem happen to me a few weeks ago and I was able to solve it by doing those few steps.
    Hope this helps!
    -Benjamin

  • My old MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but suspect logic board, any ides any body

    My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??

    Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
    Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
    other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
    You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
    Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
    I know you have a gripe, I get that all too well honestly .

  • What would cause a prolonged blue screen during start up?

    I have an iMac desktop.  Recently I've had trouble with a prolonged blue screen during start up (approx. 10 mins) before it finally takes me to the login screen.  Any ideas why this is happening?
    Jeff P.

    Hi Jeff,
    Open console in Applications>Utilities, check the system log for the date/time of the last problem Startup for clues.

  • On start up sometimes I get a blue screen and start up hang there

    On start up I sometimes get a blue screen and it hangs there the only way to get out of this is to turn the iMac off at the back then when you turn it back on the desk top appears without going through the startup screens. Even had the blue screen when starting in safe mode.

    Then run Apple Hardware Test in Extended Mode, it's possible you have a hardware issue. If you still can't locate the issue the next step is taking the machine in for a professional diagnosis at your local Apple Store or AASP.

  • Can't get past the blue screen with "starting Mac OS X"

    I am having problems with starting my iMac. It gets to the blue screen with "starting Mac OS X" but won't go beyond that point. I was able to get the disc drive open with the help of other posts, holding down the mouse while turning on the computer, but the drive won't stay closed with the install disc in it. I have even tried holding down the "c" key while restarting the computer and it wouldn't work. Any help would be greatly appreciated. So much info that I could really use. Also, please keep in mind that I am not too computer savy. Simple language please.
    Thanks

    If the steps I provided in my earlier post are not helping, then I see your options at this point as follows:
    1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
    2. Performing an Archive and Install. For important tips on this, see my "General advice on performing an Archive and Install" FAQ. Perform the steps therein in the specified order.
    3. Take the computer in for service. If there is an Apple Retail Store in your area, I'd recommend taking it there. You may wish to call ahead to make an appointment at the Genius Bar.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • HT201236 MY MACBOOK PRO SHOW BLUE SCREEN WHEN I SET UP OS.....

    when i try to set up mac os in my probook,its show blue screen.how can i solve it?

    Maybe:
    OS X Mavericks: If you see a blue screen at startup
    Yes even though you have Yosemite
    http://macs.about.com/od/MacTroubleshootingTips/qt/Troubleshooting-Mac-Startup-P roblems-Stuck-At-The-Blue-Screen.htm

Maybe you are looking for

  • Dereferencing the NULL reference while saving a Survey

    While saving a survey first time, I am getting an error message "Dereferencing the NULL reference". More details as follows: Exception: Class CX_SY_REF_IS_INITIAL Program: CL_SVY_H_SVYDETAIL_IMPL=======CP Include: CL_SVY_H_SVYDETAIL_IMPL=======CM001

  • Tooltip widget text shadow dissapears

    When typing text over one of the tooltip widgets section, the text shows up, but the shadow on the text is missing.  .  Is there any way to get the text shadow to propely appear when its over a tooltip section?  (it works over just the general page)

  • Is it possible in Workflow to auto-forward messagefrom SAPinbox to Outlook

    Hi Experts, In my workflow, previously I included a send mail step that sends notification message to holders of a position id in their SAP business workplace inbox. Then an activity step was there to determine the Outlook email addresses of those us

  • Send Message to Session via SQL?

    Hello, I see some of the oracle tools touting the ability to send lan messages to oracle sessions/users. Can anyone describe how to do this with SQL? I've looked and looked and cannot find a solution to this. Thanks!

  • More forms questions, cannot get form to align

    I tried the methods suggested here and at various sites, but could be missing something. I cannot get the form to drop into my template. I created one at wufoo and one a freeback, published my site to a folder, then edited the page in textedit by sea