Satellite L300-26K - After BIOS update the touchpad doesn't work anymore

Hi,
like recommended by tempro, I updated BIOS from ver.2.1 to 2.2 (windows-Version). After rebooting, touchpad incl. tips doesnt work anymore. In bios touchpad is enabled, in system it says unit is working properly. FN/F9 makes no effect. Reinstalling synaptics drivers - no effect - still dead.
Satellite L300-26K
Using Vista 32bit home
How can I restore BIOS to 2.1 again? (if i try the windows-bios utility from V2.1 it says it is still installed - so I cannot downgrade by this easy way)
Please help - I need my notebook without external mouse (this works)
yours
Oliver
Message was edited by: enigmo

Hi enigmo,
I cant imagine that this happened due the BIOS update. Have you tried reinstalling Windows by using Toshiba recovery disk?
This BIOS downgrade can only be done from an authorized service provider. The technicians can install every version because they have such special tools to make a downgrade.
On the Toshiba website you can find a list of them. Just give the guys and ask for that. They will help you! :)

Similar Messages

Satellite L300 (PSLB8E) - After BIOS update it doesn't boot again

Hello there..
Please help me to overcome this issue.
I have downloaded the latest BIOS for my Satellite L300 PSLB8E. The previous BIOS was 1.90 but I was facing some nework related error so I thought upgrading BIOS may help to solve it. I have download a new BIOS which is exe file 2.10, its installed successfully and then shut down but never booted again. I have tried to boot it many time. I have tried all the keys. I can only see one power led and two battery light.
I dont know what to do now. I have a recovery disk but it also not working. I'm stuck.Ii had a bunch of emails to reply I'm lost now.
Please help me someone.

Hi dhaval2000in,
Unfortunately I think the case is clear: Something went wrong due BIOS update and now your notebook cant start anymore :(
The Toshiba recovery disk will not help you because it doesnt contain any BIOS reflashing programs it contains only a recover image of Windows with all drivers and tools.
In my opinion you have to contact an authorized service provider in your country to get rid of this because the guys have to reflash the ROM module.
Im sure you can clarify this problem with the technicians and then you can use your notebook again :)

I tried to upgrade BIOS and the laptop doesn't work anymore

Hi, I tried to install the update of the BIOS:
BIOS update for Satellite A100/A105, Satellite M110/M115, and Tecra A7
but unfortunatelly when it start to be installed, a blue window shous up, the laptop resets and never start again. I can turn on the laptop and enter to the BIOS, but unfortunatelly when the Hard Drive try to start to work, it doesn't do nothing, just show a completly black screen. I tried to install windows again from CD, but after press any key for start from CD, the screen goes black and no more happens, until I press the power on button for more than a couple of seconds.
My laptop is A105-S4004 and I has windows XP.
Please, if you have any solution please let me know. I really feel very comfortable with Toshiba Laptops since I study in the university but this fact give me a very bad experience with this.
BR
Jaime

It is iPhone and iPod only.
https://itunes.apple.com/us/app/haunted-hollow/id591098046?mt=8
Requirements: Compatible with iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, and iPad. Requires iOS 4.3 or later. This app is optimized for iPhone 5.

Equium A210 - After BIOS update the DVD drive stopped working

hi, since I have updated my BIOS recently, my DVD drive has stopped working on my Equium A210-1AS with Vista 32bit.
I have tried Microsoft fixme program that does not work, upper and lower registry is not there ether in regedit.
Has anyone got any solutions to get DVD drive working again?
Thank you

The CD/DVD was working fine before I was prompted by Toshiba tempro to update my BIOS, since then my CD/DVD drive doesnt work.
Have tried fixme from Microsoft that doesnt work, have tried to delete upper/lower filters they are not there, have unistalled CD drive and restarted the drive re-installs and still does not reconise any CD/DVD to boot up and DVD drive disapears some times
Any suggestions?
Thanks

Since OS X update, under Citrix Reciever, the keyboard doesn't work anymore. The trackpad does. Please help.

I have a Macbook air. OS X 10.9.5. Since OS X update, under Citrix Reciever, the keyboard doesn't work anymore. The trackpad does. Please help.

The following from the Citrix forums indicates others are having the same problem and that one has opened a case number with Citrix: http://discussions.citrix.com/topic/355864-os-x-1095-safari-71/

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

Hi Jboudet,
Welcome to Apple Support Communities.
You can find some suggestions for troubleshooting your iPhone at these links:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Have a good one,
Jeremy

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

Satellite M40X: After Bios update keyboard keys don't work properly

I have a Satellite M40X and I had update the Bios to v. 1.60 and now the keys u, m, 7 and the arrow up are not working properly. The problem is that there is not other Bios version to use.
How can I resolve my problem?
Can I recover the old bios version?
Thanks
Gabriel

Hi there,
no you wont be able to recover the old BIOS. The only two options are:
1. Retry the BIOS update and check if its working
2. In case of no success, please visit the [ASP Locator|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and to ask them for a hardware checkup and repair.
Greets

[solved] Touchpad doesn't work anymore

I have a Acer Extensa 5235. Since today the touchpad isn't working on Arch anymore.
I tried out a Windows installation medium and there it worked so it should be physicaly okay.
relevant part of xorg log:
[ 406.866] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 406.866] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 406.866] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 406.866] (II) LoadModule: "synaptics"
[ 406.866] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 406.866] (II) Module synaptics: vendor="X.Org Foundation"
[ 406.866] compiled for 1.8.0.902, module version = 1.2.2
[ 406.866] Module class: X.Org XInput Driver
[ 406.866] ABI class: X.Org XInput driver, version 9.0
[ 406.866] (II) Synaptics touchpad driver version 1.2.2
[ 406.866] (**) Option "Device" "/dev/input/event5"
[ 406.866] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 406.866] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 406.866] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 406.866] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 406.866] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 406.866] (**) Option "TapButton1" "1"
[ 406.866] (**) Option "TapButton2" "2"
[ 406.866] (**) Option "TapButton3" "3"
[ 406.867] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 406.867] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 406.867] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 406.867] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 406.867] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 406.867] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 406.867] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 406.867] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 406.867] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 406.867] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 406.867] (II) Synaptics touchpad driver version 1.2.2
[ 406.867] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 406.867] (**) Option "Device" "/dev/input/mouse0"
[ 406.867] (**) Option "TapButton1" "1"
[ 406.867] (**) Option "TapButton2" "2"
[ 406.867] (**) Option "TapButton3" "3"
[ 406.887] Query no Synaptics: 6003C8
[ 406.887] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 406.887] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 406.887] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 406.888] (II) UnloadModule: "synaptics"
10-synaptics.conf:
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Has anybody an idea how to fix this?
Last edited by IwfY (2010-07-14 13:49:11)

> Can you post what you added to your /etc/X11/xorg.conf.d/10-evdev.conf?
I tried a couple of different options in 10-evdev-conf and 10-synaptics.conf. None really made a difference.
The cleanest might be this:
10-synaptics.conf as above.
included at the end of 10-evdev.conf:
Section "InputClass"
Identifier "disable synaptics secound mouse found"
MatchProduct "SynPS/2 Synaptics TouchPad"
MatchDevicePath "/dev/input/mouse0"
Option "Ignore" "on"
EndSection
xorg log:
[ 163.236] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 163.236] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 163.236] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 163.236] (II) LoadModule: "synaptics"
[ 163.236] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 163.251] (II) Module synaptics: vendor="X.Org Foundation"
[ 163.251] compiled for 1.8.0.902, module version = 1.2.2
[ 163.251] Module class: X.Org XInput Driver
[ 163.251] ABI class: X.Org XInput driver, version 9.0
[ 163.251] (II) Synaptics touchpad driver version 1.2.2
[ 163.251] (**) Option "Device" "/dev/input/event5"
[ 163.251] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 163.251] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 163.251] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 163.251] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 163.251] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 163.251] (**) Option "TapButton1" "1"
[ 163.251] (**) Option "TapButton2" "2"
[ 163.251] (**) Option "TapButton3" "3"
[ 163.251] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 163.251] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 163.251] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 163.251] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 163.251] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 163.251] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 163.251] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 163.251] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 163.252] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 163.252] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "disable synaptics secound mouse found"
[ 169.276] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 171.588] (II) UnloadModule: "synaptics"
I also tried out the Fedora 12 Live CD which should use xorg-1.7 but it didn't work either.

Touchpad doesn't work anymore

Hello there,
I've a problem with my touchpad. It doesn't work anymore.
A few months ago I had a few problems with the touchpad. The cursor was running over the screen, random clicking some things. Sometimes it happened for an hour, sometimes for a few days, but it always stopped. Later it didn't disapear anymore. The touchpad isn't working at all, so I'm not able to work with it anymore. I already cleaned the touchpad from the outside and the inside., but there's no change. It's not so good that something important like that gets broken in such a short time, I have my laptop for two years now. I'm curious if there is a special guarantee for this, because I think this is not my fault. Maybe there is something wrong from the beginning or something.
Can anybody help me?
Thanks a lot.
Bye.

You can check your service and support coverage here.
I have my laptop for two years now.
Unless you purchased Apple care, the one year limited warranty has expired.

Satellite P500 - After BIOS update the number pad isn't working anymore

I just got a Satellite P500 and am running Windows 7. I downloaded all of the latest drivers and updated the system bios to version 1.70 (from Toshiba's support website). Now, my number pad on the keyboard is not working.
The numlock light is on and when I hit the "6" key on the number pad, it turns the light on/off but the behavior of the other keys does not change whether it is on or off. The "-" key enters a "6" but none of the other keys (except "enter" does anything.
I removed the keyboard driver and restarted to re-install the keyboard driver but that had not effect. The keyboard did work for a few days after I flashed the bios but seems to have stopped since I started using a USB mouse. I tried uninstalling the USB mouse driver but that did not do anything either (it was a Logitech driver).
Anyone have any ideas? Thanks in advance

I'm having this exact same issue, Did the BIOS update, which fixed the problem for Vista X64, formatted the machine to windows 7, Number pad keys except 6 and - Register as the Fn Button, Bringing up the function shortcuts display when pressed in windows, recovered from 7 to Vista X64 using Built in recovery partition, Problem still exactly the same. i have reset BIOS to defaults twice now, which has not resolved the issue. the next step will be to reflash the bios with the update again to see if this will fix the issue as it did once before. Laptop Model P500/025 Or Part number PSPE8A-025002
*EDIT: I reflashed the BIOS with 1.70 Again and the number pad is back to normal. Seems like an extreme fix for a silly problem. Every time you format you have to Reflash your bios, risky no?*
Message was edited by: Matrixion

Satellite L - After BIOS update the screen is black

Hello,
I made a BIOS update on my Windows 7 64 bit and then the OS get frozen. After I restarted the laptop, there is only black and nothing appears on the laptop.
What can I do?

Hi
Have you tried to remove the battery and AC/DC adaptor? You should test this and after one hour you can connect both devices again.
In worst case you need help from an authorized service provider. The technicians can try to reflash the ROM module.
Sorry, but I think in this case you can do nothing.

Satellite L630 dead after BIOS update

Hi
I have a problem with a Toshiba Satellite Laptop L630 model PSK00E-017019EN (UK model).
A Toshiba software scan recommended a BIOS update and as I had been having some issues with the laptop I decided to let it run . . . bad mistake!
The laptop will now not fire up into bios so is effectively dead.
I have downloaded various versions of the Phoenix Crisis Recovery Disk (which will build a bootable USB flash drive with MINIDOS.SYS, PHLASH16.EXE and a generic BIOS.WPH) and have also downloaded the latest BIOS from the toshiba website.
The downloaded Toshiba BIOS is an exe file SL630_L635_WIN_B140.exe which will extract to the following files using WINRAR (I have also tried picking up the files from %temp% after running the exe file with the same result).
The files I get are:
BB10140.FD (4170kb)
Ding.wav (104kb)
InsydeFlash.exe (764kb)
iscflash.dll (1760kb)
iscflash.sys (14kb)
iscflashx64.sys (23kb)
and platform.ini (9kb)
I was expecting to see the actual bios in the form xxxx.rom or xxxx.WPH so that I could add this to the bootable flash drive to reflash the bios.
So my actual question is, could someone point me towards where I can download the correct BIOS.ROM file for this laptop and also where I can obtain the correct version of Phoenix Crisis Recovery Disk software.
Also could you confirm the correct key sequence to boot to the Crisis Recovery flash drive . . . I have seen mention of both FN F and FN B (both used without battery and whilst plugging in adapter and then power button) . . . the FN F routine seems to boot the Flash drive but obviously without the correct WPH file it will not solve the problem.
Thanks
Phil

OK
.... well contacting Toshiba support was about as much using as whistling in the wind!
They had no knowledge of reflashing the bios, certainly could not send me an image for a crisis disk (even for a charge) . . . and their only suggestion was to have the laptop picked up for assessment and quote which would cost nearly 100 even if I didnt have it repaired. (I doubt if the laptop is worth much more than that)
So back to the forums in the hope that someone might point me to the correct USB Flash drive flashing routine for this laptop!
I have a feeling that the bootblock might now be damaged on the BIOS as it is now behaving differently if I try to flash the bios.
If I put the correct "bios.fd" file on a USB stick and then use FN-F on power up (no battery installed) then the usb stick flashes once, machine powers up, stays on for about 10 seconds and then restarts back to the black screen.
I have also tried (as suggested on one forum) putting all of the extracted files from the bios exe from Toshiba onto a stick + the FD file renamed as BIOS.FD . . . still the same result.
I am close to sticking it onto Ebay as "spares or repairs" . . . HELP!
thanks
Phil

Satellite Pro M40X: after BIOS Update- no boot!

Hello, i have the problem: there was no reaction after try to update the BIOS (within Windows XP). So i switched the notebook off(AC power off, battery away).
So now i have after "switch on" only black screen, there ist no boot menu, no bios, only the fan ist running.
What can i do in this situation?
Thanks: vladi

Hi buddy,
the only thing you could do is to bring your machine to an ASP (authorized service partner) for a hardware checkup or BIOS repair because you in your situation cannot do anything.
Please, contact a service partner and send your machine to them, its the only way to solve your problems.
Heres a link to find the nearest ASP in your country:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck and nice weekend

Satellite L300-26K - After BIOS update the touchpad doesn't work anymore

Similar Messages

Maybe you are looking for