Satellite L300 BIOS update problem: "That BIOS is not for your notebook PC"
I got Satellite L300 notebook and I want to update it's BIOS (current v1.50), so I've downloaded bios update v1.60-WIN and when I run extracted PS10160M.exe file - I get a message that "That BIOS is not for your notebook PC".
What I'm I doing wrong?
ps: that BIOS update was automatically suggested after registration on Toshiba website via serial number.
UPD: seems like autosuggestion fail: Manual search shows that 1.60-win bios update not suitable for Satellite L300 PSLBCE model. :-(
Did you download the BIOS for the PSLBCE model?
You cannot use the BIOS from other L300 models, for example PSLB0E.
If you installed Windows yourself using a generic Windows Disc, you will need to install the Value Added Package from the Toshiba website. The BIOS Update requires the TVAP package to detect the machine properly.
Similar Messages
-
V6500 BIOS "not for your Notebook PC"
The HP website has a BIOS posted for my notebook that I am attempting to download and apply. However, when I download and run it, it gives me the message "This BIOS is not for your Notebook PC." What is the problem here? Is this the right file behind the link? Is there an issue with my notebook?
Here are the particulars:
System:
Compaq Presario V6500Z CTO
Windows Vista
BIOS:
sp42141.exe
F.31
The HP Health Check, Total Care Advisor, and the HP Support website all tell me to apply this BIOS file.I have this same exact problem. It looks like any BIOS on the website for my specific model number give me the message Not for your notebook pc. It appears to automatically laucnh winflash64, but I chose Vista 32 bit. not sure if that is the issue.
I tried the firmware upgrade for the hard drive and it fails.
Tried the optical drive update and the update is not for my device -
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
I descarguei these new versions adobe creative Cloud, y uninstalled for removing the trash, why did not interest me, then appearing me sigue to update something that I have not already installed, how do I solve this problem?
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/ -
When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?
mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
Mac os 10.4.10 software update problem -- my mac does not work anymore :(
hello!
i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
My mac problems' driving me crazy!!!There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695 -
I have OSX 10.7.5. I loaded Powerschool, this sent me to oracle to load java 7, now powerschool won't laod, java 7 logo just spins. I contacted orgacle live help, said it was a mac problem that they could fix for $75. Any help would be wonderful. MT
Pearson put out a tech note on this today - the new versions of Java are what's causing the problem. If you can use Time Machine to rollback java prior to a java 7 or 1.6.0_37 version that will get you going again. I've been searching for hours for a place to download the older version but it seems Apple's site and Oracle all only have the latest release. Still trying to see if I have a copy downloaded on a system that hasn;t been updated to copy off to a network drive or usb and install the older version on to systems.
PowerSchool Tech Notes
PowerTeacher Gradebook and recent Mac OS X Java update
An update to Java for Mac OS X was released on October 16, 2012. An issue has been identified with this Java update (Java for OS X 2012-006) which prevents teachers from launching PowerTeacher Gradebook.
Teachers using PowerTeacher Gradebook should avoid taking this Java update to version 1.6.0_37 until notified that PowerTeacher Gradebook has been certified with this latest version of Java 1.6 for Mac OS X. PowerTeacher Gradebook will continue to work on Mac OS X workstations with Java version 1.6.0_35.
Additional communication will be provided once a workaround is identified or an updated version of PowerTeacher Gradebook is available. -
I have a problem that I can not load or even close the download in iTunes, it turns out I have hanging in the mode, and because of that I can't download from AppStore, because it turns out that the other programs I have on standby. What do I do? Thank you.
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
Hi, you know how i can fix the problem that my iPhone5s not have any coverage in place? Please.
Hi, you know how i can fix the problem that my iPhone5S not have any coverage in place?
Please, and thanks.If it's out of warranty, Apple will replace your phone for $269.
-
there are two apps in my update section that I did not install and do not want. How do I get rid of them without?
Web browser apps display the same warning - and as Rkedge pointed out - any app that accesses web content may show that warning.
Atomic, Mercury, Google Chrome, iCab Mobile ... All web browsers and I think that they all display that same warning. -
Why I can't update my ios to ios6? It always display that..Error in updating..I am using ipad3. Please help me update my ios. Looking forward for your kind support and cooperation. Thank you.
Why I can't update my ios to ios6? It always display that..Error in updating..I am using ipad3. Please help me update my ios. Looking forward for your kind support and cooperation. Thank you.
-
i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?
I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown -
Igot new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do
Hello, krishna kumar.j.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing and issue with your Home button. Here are the troubleshooting steps when experiencing this.
Get help with buttons and switches on your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT203017
Cheers,
Jason H. -
I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?
Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps -
Good Morning,
We are getting this error
Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers
of the appropriate version can be accessed from the Internet
We installed a new Exchange 2007 CAS on Windows 2008R2. Got rid of old CAS on Exchange 2007. Now seeing this error. Does anyone have an idea??Hi,
If the issue persists, I recommend you install Exchange 2007 SP3 RU7 and check the result. Also, ensure that Exchange 2010 SP2 RU1 or later version is installed. Old Exchange version may lead to the CAS-to-CAS proxy incompatibility.
What's more, here are some helpful blogs for your reference.
Exchange 2010 SP2 RU1 and CAS-to-CAS Proxy Incompatibility
http://blogs.technet.com/b/exchange/archive/2012/02/17/exchange-2010-sp2-ru1-and-cas-to-cas-proxy-incompatibility.aspx
OWA Coexistence With Legacy Versions
http://blogs.technet.com/b/sjimmie/archive/2010/07/09/owa-coexistence-with-legacy-versions.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support
Maybe you are looking for
-
Just bought a new phone, and now I'm trying to activate it.
Hi, Just got my new Blackberry in the mail, my old one is completely dead and I have all it's info backed up but not synced on my computer. Every time I call *228 I go through the activation process until it asks me for my password, which is when I t
-
Windows Identity Foundation no more available? No Dynamicy CRM working?
Hi, I am testing Windows 10 TP. I tried to configure Dynamics CRM but it crashes with the exception: "Could not load file or assembly Microsoft.IdentityModel". The Internet says that I have to install the Feature "Windows Identity Foundation", but th
-
I tried to upload some photos to my iWeb site last night and a message comes up and says to sign in to Mobileme, however, when I try that another message says Mobileme has been disabled. I have moved to iCloud, but I am not sure how to apply that to
-
Will IPOD 4th generation Charger work with IPOD Nano
Hi My son has a 4th generation IPOD (20GB) which came with the standard IPOD charger. My wife has just bought an IPOD Nano (4GB). I just want to check whether I can use my son's charger to charge my wife's IPOD Nano. I don't want to risk damaging my
-
Newbie question related to structured document saving to XML
I am Framemaker newbie working on existing Help File documents. I figured out how to updated different modules and steps but having problems adding new module headings as when it is saved to XML the anchoring, not sure if that is the correct term, is