Satellite L300 - cannot upgrade from Vista to Win7

Hi,
i have a problem i bought the Satellite L300 (windows vista home premium was installed , i had to buy the windows upgrade 7 from toshiba which i did and installed with no problem at all .
But now after having to use the recovery cause i got a virus on my machine it went back to windows vista .
Now when i try to run the upgrade 7 cd it gives me a message (the model does not support windows 7 upgarde ) how could that be since i already had it on this system before ?
Can someone help me tp fix the problem or give me an explaination on why its doing that ?
thank you .

Hi
Here once again the link posted by Paolo:
+*Windows 7 upgrade: Step-by-step Upgrade Guide*+
http://aps2.toshiba-tro.de/kb0/TSB9902P60000R01.htm
You need two disks:
- Toshiba Windows 7 Driver and Software Upgrade disc
- Microsoft Windows 7 Upgrade CD
Here the whole procedure:
+Upgrade Guide with Toshiba Win7 Driver Upgrade DVD and Microsoft Windows 7 Upgrade+
1. Toshiba recommends a clean installation of Microsoft Windows Vista.
Please store all your Data to an external HDD or other storage Media and recover your notebook.
2. After this, the drivers for the upgrade can be installed. Please insert the Toshiba Windows 7 Driver and Software Upgrade disc.
This disc contains a tool which automatically uninstalls all spuriously moduls and afterwards it installs all necessary drivers for Windows 7.
While this process is running, the computer may reboot sometimes.
If any messages appear on the screen, please follow them and take actions if needed.
3. If the driver installation is completed, please insert the Microsoft Windows 7 Upgrade CD and start the Upgrade.

Similar Messages

  • No source signal after running an upgrade from Vista to Win7

    I have an HP S2031 monitor and I am getting a No Source Signal message after I ran an upgrade from Vista to Win7 operating system.
    Computer is running and all cables are connected properly. 

    Seems like it is not a monitor problem.
    Disconnect hard disk and disassemble the memory RAM.
    Switch on the pc, then switch it off again.
    Re-connect hard disk and ONE RAM stick only.
    Retry boot with one stick after the other.
    Which pc do you have?
    Do you have an additional graphics card?
    Which output port do you use for the graphics.
    How is it connected to the monitor?
    Which port at the monitor side?
    *** Say 'Thanks' with Kudos ***

  • Satellite P200-17C - Upgrade from Vista to Windows 7

    Am looking to upgrade from Vista to Windows 7, anybody done this? And was thier any problems with drivers etc?
    Thanks

    Hi
    I dont know what you want to hear now exactly but you can download all drivers here:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    As far as I know this P200 model belongs to the PSPB6 series.
    Therefore it seems that all drivers available for Windows 7 32bit.
    Generally about Vista and Windows 7 I can say that new OS runs much faster and never had a problem as yet. I can recommend it! :)

  • HP Solution Center doesn't work after upgrade from Vista to Win7 64b

    Two problems. 1) Upgraded Dell 1737 Notebook from Vista Home Premium to Windows 7 64b. HP Solution Center no longer works. Have HP Officejet Pro 8500 A909a printer hardwired into router. Downloaded new printer drivers, still cannot print. 2) Cannot get Solution Center to execute. Message says can't find "SolutionCenter.msi". No Win7 upgrade for Solution Center on HP site.

    Hello ReallyFreeBob,
    Lets first try Uninstalling the existing printer software using the listed steps..
     Press the keys Win + R, a RUN box would open. Type in the command %TEMP% in the box and hit OK button.
         A temp folder would open, locate for the folder name begning with 7z..... , open it , then do the following ..
    Locate for folder "UTILS" and double click to open it. Locate for folder "CCC" and double click to open it. Locate for file Uninstall_L3.bat and double click to Run it. Follow the onscreen instructions
    After the uninstallation is done you may have to restart the PC. 
    Then download and run the HP Printer Install Wizard from www.hp.com/go/tools
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Can't print from my Satellite since I upgraded from Vista to Windows 7

    I recently upgraded my wife's Satellite Model A205 from Vista to windows 7.  I have spent days trying to figure this out with out sucess.  We have a Verizon wirless net work and my other laptop, running Windows 7, works just find.  I have reloaded Windows 2 times with out any luck.  Any ideas out there??
    Thanks in advance for your concern and help.

    Which Satellite A205?
    Which Windows 7 (64-bit)? What about the other laptop?
    Which printer model, version, and so forth?
    -Jerry

  • Satellite Pro A210 Upgrade from Vista to Windows 7

    Hello
    Can anyone suggest why I am having problems upgrading from 32bit vista to windows 7 - 32 vista?
    I'm not sure if it is because there isn't enough RAM
    Has anyone else had a similiar problem on this laptop?
    Thanks
    CLary

    Toshiba have a guide to upgrading at [http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletin.jsp?ct=SB&soid=2450599&ref=EV]. I'd go through their suggested method and then come back if you still have problems

  • Satellite Pro L - Upgrade from Vista to Windows 7 possible?

    Does anyone know if the Satellite Pro Recovery disc (Vista) qualifies as a basis for upgrading to Windows 7 using a Microsoft Upgrade Edition disc? Or is the full retail new version needed?

    Hi seoras,
    I dont see a reason why it should be not possible...
    I mean if you install Vista from Toshiba recovery disk its the same Vista as from a Microsoft disk but with all drivers and tools from Toshiba.
    So just buy a Windows 7 upgrade disk that is cheaper as a full version and start the upgrade. Thats all!
    If you need new drivers after Windows 7 installation, just check the Toshiba website. On this page you can find all downloads for your notebook.

  • Is possible for laptop hp pavilion tx1106au upgrade from vista to win7?

    My laptop model is tx1106au and preinstalled vista home premium 32bit. Recently I had bought windows 7 home premium 32 bit software and I want to upgrade, however, when I run the Windows 7 Upgrade Advisor, the report is have twoissues as below:
    HP Quick Launch Buttons, currently the version I used is 6.10B9, which version shoudl I update?
    VeriSoft Access Manager, now the version 2.1, the hardware driver is AuthenTec Inc. AES1610, version is 7.9.
    Is there someone can do me a favour to help me solve the issues?
    Thanks in advance, my location is in China, so I prefer the software and application have english and chinese (simplified) edition. My personal mail is [email protected]

    Hello ReallyFreeBob,
    Lets first try Uninstalling the existing printer software using the listed steps..
     Press the keys Win + R, a RUN box would open. Type in the command %TEMP% in the box and hit OK button.
         A temp folder would open, locate for the folder name begning with 7z..... , open it , then do the following ..
    Locate for folder "UTILS" and double click to open it. Locate for folder "CCC" and double click to open it. Locate for file Uninstall_L3.bat and double click to Run it. Follow the onscreen instructions
    After the uninstallation is done you may have to restart the PC. 
    Then download and run the HP Printer Install Wizard from www.hp.com/go/tools
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Satellite A305D-S6848 - Upgrade from Vista to Windows 7 32bit

    I started the upgrading process, but it giving me a message that, I need to uninstall ATI CATALYST Install Manager, ATI Catalyst Control Center. My laptop is model A305D-S6848 Vista 32 bit. I don't know where to start to get that so can somebody point me to right direction to get that?
    My laptop use ATI Radeon X1250 Graphic Card.
    Any help will be greatly appreciated, thanks

    Hi buddy,
    I think you have to uninstall the ATI Catalyst driver (display driver) because the version is too old and not compatible with Vista. You can uninstall the display driver in control panel > uninstall software. There you should find a list with all installed programs and drivers.
    Newer display driver you can download on official Toshiba website:
    http://www.csd.toshiba.com
    Check this!!!

  • CS4 challenge after upgrading from Vista to Win7

    went thru a nightmare having Win7 installed. was a clean install. now can't get CS4 to install. did the adobe helper thing and remove whatever was listed in the programs left from CS4. (I do have elments 7 installed, but that has not been an issue) it reviews everything and then says contact customer service.i found them less than helpful so far.  any clue?

    If the clean install was done without a format, there's a folder on your C: drive named Windows.old.
    This was the case with my 7 install and I had to delete the Windows.old folder to get things going.
    Mike

  • Need Detailed instructio​ns to install new hard drive & upgrade from Vista Home to Win7 Enterprise

    Hi folks,
    I have this laptop machine:
    Lenovo 3000 G530 4446-23U Laptop Computer - Intel Pentium Dual-Core T3400, 2GB DDR2, 160GB HDD, DVDRW, 15.4" WXGA, Vista Home Basic
    I need to install another hard drive and I also want to upgrade to Win7 Enterprise Edition while doing the rebuild.
    I am very nervous about doing this as I upgraded a W530 from Win7 basic to Win7 Enterprise and ran into all kinds of drive issues.  And I thought that would be about as straightforward as you could get, but it a far cry from that.
    I do not want to have to go through that again - I still don't have everything working on it.
    Can someone please tell me the precise steps to take to do this upgrade and how to ensure that I obtain ALL the drivers for EVERYTHING on the laptop and how to ensure that all those drivers are correct and exactly how to install them.
    If there are other issues associated with upgrading from Vista Home to Win7 Enterprise, please advise of those and the solutions.
    Thanks very much.....
    Gus

    hi gmercanti,
    Welcome to the Lenovo Community.
    The easiest way to upgrade Vista to Windows 7 is to run the Windows 7 Installer inside WIndows. Follow this guide for instructions. After upgrading, you will need to install the Windows 7 Drivers for Lenovo G530 4446 via http://support.lenovo.com.
    Spoiler (Highlight to read)
    Let me know if you get any errors.
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Dv4-1428dx with win7 upgrade from Vista. No internal spkr audio.

    dv4-1428dx with win7 upgrade from Vista. No internal spkr audio.
    Headset audio is OK.
    Speaker icon in system tray shows red "x" (no connection) unless headset is plugged in.
    Device Manager only shows two "High Definition Audio Device(s)", nothing else.
    This question was solved.
    View Solution.

    Hi:
    Try installing the Vista driver from your notebook's support and driver page and see if that fixes the issue.
    Paul

  • C6150 won't print after upgrade from Vista to Win 7

    Hello.
    I have a C6150 AIO that worked fine under Vista.  Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print.  The HP Solution Center test print works fine.
    -  Printer is hooked up wirelessly
    -  I've installed the latest driver from HP that is supposed to be Win 7 ready
    -  I've also installed the patch they recommend after upgrading from Vista
    There is no error.  Print job shows up briefly in the print manager window, then disappears as though it printed.  I'm at a loss, any help would be appreciated.
    Paul
    This question was solved.
    View Solution.

    I hope I have now sorted this problem.....
    After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
    Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
    After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful  restore system and start again.  Most it took me was three attemps.
    Now allI have to do is hope that the windows updates dont mess it all up again!
    Hope this helps you......... Good luck

  • Help needed upgrading from Vista to XP for Conexant Sound Driver

    I upgraded from Vista to XP and got everything else working except for the sound. I have scoured the interenet and tried many versions of drivers from Vista ones to XP ones with no success. Even though the drivers seem to update correctly when installed, after a reboot there is no sound device loaded in the control panel for sound. I have a P105-6197 model laptop. Does anyone have any process to make this work that is proven? Thanks
    Casey Jackson
    Solved!
    Go to Solution.

    Satellite P105-S6197
    Try these two sound drivers, Casey. The first one is newer (European date).
       Conexant Sound Driver for Windows XP, 3.44.0.0, 06/12/07
       sound-20071106151533.zip
       Conexant Sound Driver for Windows XP, 3.21.0.52, 15/10/07
       sound-20071015135316.zip
    -Jerry

  • Elements 5 will not start from the windows old file after upgrading from vista to win 7

    Elements 5 will not start from windows.old after upgrading from vista to win 7

    Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
    What exactly happens ? Can you see the processes running in Task-manager?

Maybe you are looking for