Satellite L300 does't run after BIOS update from V2.10 to V2.20

Hi
I just installed BIOS V2.20 over the Bios V2.10 for my Toshi Satellite L300 over Windows XP.
Afterwerwards the Machine starts and shows just the XP starting window and the restart that I have the options save restart or normal restatr.
Nothing runs any more? Even starting from Windows-CD has no effect.
Who can help?

Thanks for you suggestions, but F2 did not help.
I performed the Bios update because on the website of Toshiba, there was written, hat the update increases function of the system.
I just called the update service. They mentioned I should reinstall Win XP, because my Computer starts, but Windows is not starting.

Similar Messages

Satellite Pro L100 does not run after BIOS update

Ok the machine is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during a BIOS update from the official Toshiba website. I downloaded the zip file, extracted it and activated the .exe file inside.
The window opened by the .exe was a BIOS flashing program, the .exe also simultaneously wrote a new BIOS file to a temporary folder.
When tried to use the program all I got was an error saying that it couldn't find the new BIOS to input.
I tried again only to get the same error. I then left the laptop for several minutes and when I returned, I found a blank unresponsive laptop.
By unresponsive I mean an obvious lack of BIOS functions i.e. power LED's not changing when plugging in of unplugging from the mains and the fact that I had to pull the battery out to turn the machine off. When the machine is turned on now all it does is check the drives and restarts (no display, no beeps)
What do I do?
The first thing that came to mind was to reset the BIOS.
One problem, I can't find the RTC battery or a jumper switch.

I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

ThinkVantage Toolbox does not run after BIOS update

Lenovo ThinkVantage System Update Tool on my T410 ThinkPad (2518EWG) offered me download and installation of ThinkPad BIOS Update Utility US version 1.28-1.11.
Since then, whenever I try to run Lenovo ThinkVantage Toolbox I receive a message: „This version of Lenovo ThinkVantage Toolbox is not licensed to run on this system“.
I notice that the ThinkVantage Toolbox still shows the old BIOS No. 6IET49WW (1.09), while the updated BIOS is 6IET68WW (1.28).
Any comprehensible instruction how to solve the problem for a computer layman will be much appreciated. Thanks - Jan

I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Satellite L650-1KR PSK1JE - dead after BIOS update

As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
Of course my warranty is already over... :-(
Please help!
Thank you in advance...
lichtimc

Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

Satellite Pro L300 will not boot after Bios update

Help please.
I have just formated a Satellite Pro L300 laptop.
I used all the updated drivers from Toshiba and all went very well.
I then updated the bios with the latest version.
After doing this the laptop will not boot but just keeps scrolling through the start menu and no matter what option I choose it just keeps doing the same thing.
Any ides welcome

Hi
I used the Microsoft installation disk but just keep getting to the same stage until the blue screen appears. I have tried different installation disks and also changed the hard drives as well. I can do everything in bios, change boot device enable or disable devices but that is it. I have tried a few times to instal windows but it just stops at the same point saying windows is stopping instal to protect the system. I fear the bios update has done some permanent damage as I cant get past the dreaded blue screen.Thanks anyway

Satellite C660D-104 does not boot after BIOS update

Hello,
I installed the latest bios on my computer Satellite C660D-104 but it has not rebooted.
Where is the place to do a reset?
Under the ram I have no triple x or B499
I can not find, can you help me please?
Thanks,

BIOS update failed this means that ROM module (where the BIOS is stored) isnt flashed properly.
As far as I know such issue could be resolved by flashing the ROM module again using Toshiba BIOS crisis disk.
I guess Toshiba authorized service provider own such crisis disk and could reflash the ROM

Satellite P850-30W - Fan does not run after coming back from sleep mode

I got a Toshiba Satellite P850-30W with bios 1.90.
Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
...this error could potentinally damage the laptop...
to get the fan running again I have to restart windows
anyone else experienced this?
I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

What kind of answer do you expect here in user community?
Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
In other Forum you can read about Satellite notebook; but is it exacts the same model?
No, it seems to be an L650 series. Its completely different series .
From my opinion its not software related problem.
BIOS issue?
Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
It could be a hardware related issue. Memory? Maybe
In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

Satellite A50 doesn't function after BIOS update

Hi All,
I tried flashing my BIOS through windows as recommended on my Laptop Manufacturer (Toshiba) website. I guess the process went wrong as after 2 hours still the message "Do not interrupt" was getting displayed. I had to force power off my PC. Now it is not booting up.
The Laptio is Toshiba SA50-114, Satellite series.Model No - PSA50E
I have tried suggestions in following link
http://askiris.toshiba.com/ToshibaSu...200%2035586212
However, this did not work.
However, I don't have the recovery disk tool and BIOS/ROM file. Have tried searching on internet, but with no results.
Can someone please help me with
1. How can I perform the BIOS update to get my PC running back.
2. Point me to links where I can find the files in the above link.
Many Thanks in advance.
Best Regards,
Parag

> 1. How can I perform the BIOS update to get my PC running back.
Not possible if your BIOS ROM module was wrong flashed.
If you are a lucky man then only the ROM module must be flashed again using an special procedure. But this can be done only by an authorized service provider in your country.
> 2. Point me to links where I can find the files in the above link.
There is no link! You will have to ask the ASP for the help.
Bye

Satellite C850 - Low fan speed after BIOS update

Hello,
So I have my Satellite C850-PSKCEV bios updated around 6 months ago to version 6.80 (I bought my laptop in 2012), and since then the fan is running at low speeds and will never run full speed as before, and as a consequence the laptop overheats prematurely and very fast, and even when the laptop is not in use but left running it does overheat, also gaming is not even possible as any game that I run (even with the lowest settings) gets a fps drop every 5 seconds and lasts 5-10 seconds which renders even the lightest games unplayable, also I am afraid of the continuous overheat to damage the laptop's internal components.
I did clean the fan and vents from dust and there is not even one particle inside them and yet the fan won't run fast and I can't feel but very slight airflow from the vents as apposed to the strong one before this problem.
Laptop model Toshiba Satellite C850-A811 Part No. PSKCEV-00S00FAR
Intel Core i5 2450m - AMD Radeon Hd 7670m
Windows 8.1 64bit

Hi
Have you tried to change cooling method settings and set it to maximum performance?

Satellite A660 - USB boot problems after BIOS update

Hello,
I own a Toshiba Satellite A660 and recently have update the BIOS to the latest version (1.80). Since then the notebook will freeze on the boot screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
It works without the flash memory connected and also if I connect it after I enter the boot menu or the BIOS setup. I can even boot from it like this.
As far as I am concerned this is a serious regression. Is there any way I can downgrade the BIOS version, or any other way to fix this issue ? I rely heavily on external USB drives.
Regards,
Claudiu.

I too am having problems with my A660 since upgrading to 1.80 bios - the HDD/SD utility, the pc health monitor and half the other toshiba utilities no longer work because they can't recognize the bios and actually tell me this... I get an error message telling me ''can't get bios type''...
On top of this I get the boot problem as well - I have to unplug half of my USB devices to get the laptop to boot properly...
And now - one month into owning my new A660 - after a hard drive failure, a problem with the Broadcom internal wireless adaptor I now have the internal TV tuner no longer working and have no idea how to fix it...
My gut feeling is that the sooner I can downgrade to the original factory bios the BETTER - and wait for another bios update to come along that is not faulty/buggy...
HOPE someone can help me with this...
John.

Equium A60 does not start after BIOS update

I have an Equium A60. After being caught with some very nasty malware and a trojan I made the disiccion to reformat the machine and reinstall the o.s..
All went well until I updated the bios. Machine crashed and now I cannot get it to reboot. Press the power button and the machine will start for 3-4 seconds and then shuts down.
I know this is due to the bios and want to know if there is any way that i can reset this back to it original settings?
thanks in advance for your help

Hi Rob.
The model of my laptop is EA60-152 / PSA67E.
Yes i did upgrade from the Toshiba website.
I should have never done this it was working after the reinstall of the o.s and so i should not have tried anything else(never fix something that aint broke).
The only place i have found for a new motherboard is Toshiba. But the price is nasty. Talk about what a fool am i.
Never mind though i keep on thinking that there may be an answer or a scrap one that i can rob a bios chip from. Other than that a very nice paperweight me thinks..!!!!
If i get an answer than i will post it here..

Tecra A2: display brightness Fn F6+F7 does not work after BIOS update

Updated bios to 1.40 WIN at end of January. Since then F6 & F7 keys fail to increase or decrease screen brightness. Is this a coincidence or is the bios update the culprit!!??

Hi
Usually the BIOS update shouldn't have any bad influence on the Toshiba drivers and the OS performance.
There must be another reason for the FN key malfunction.
At first I would suggest to reinstall the common modules. Please check if it will help.

Satellite C870-196 - Long launch after BIOS update

Hello
I went to u BIOS 6.00 to 6.70 and I have a very long black screen between the TOSHIBA logo and the launch of my session I had not before!
I delivered the default settings in the BIOS (F9) as shown.
Where can this come and what to do?
Thank you
Kind regards

Well, new BIOS updates contain always some changes and probably something has been changed in new version and therefore the time between Toshiba logo and appearance of the image is a little bit longer.
What to say its not know to me that you could modify this delay so you will need to accept this BIOS change

Satellite L855 won't boot after BIOS update

I downloaded the BIOS update and followed the instructions it gave during install, however upon reboot (which the setup initiated) I get a blank screen. The CPU fan intermittently starts and stops. I am thinking that the BIOS update was unsuccessful, how do I resolve this issue?
Thank you,
Neil.

Hello Neil
Generally speaking when BIOS is screwed up you need professional help and you should contact nearest Toshiba service provider and ask for help.
Check also this thread. Maybe this methid can help you too.

Satellite L300 does't run after BIOS update from V2.10 to V2.20

Similar Messages

Maybe you are looking for