Satellite L300 - Is overheating and shuts down

I've just got my laptop back after getting it fixed (new HDD & BIOS/FW update according to the sheet that came with it). But now another problem has developed with the laptop overheating & auto shutting down a lot as a result.
Is there any way to check that the fan is actually working inside as I think that it might not be?

Hello
Maybe you have to clean the notebook. What do you think about this?
I have Satellite L300 too and I clean it every 3 months. Im wondering how much dust comes out if I clean it using compressed air spray. This is very nice to clean the notebook because I dont have to disassemble the notebook and it takes only few minutes.
Compressed air spray you can buy from every computer shop so check this!!
Last but not least did you install the correct BIOS for your L300? Because on the Toshiba driver download page you can choose between different L300 models.
Greets

Similar Messages

  • Satellite A500-026 Overheats and shuts down during gaming

    Hey guys, any help would be appreciated.
    My 026 has recently started overheating and randomly shutting down during video games. I can't even run TF2 for more then an hour without it dying on me suddenly. It never used to do this for months of use.
    I can only assume its a problem with my video card. I have tried downloading drivers from Toshibas site and the latest releases from Nvidia without change. I have already booked a MobileCare service, just wanted to gauge what possible problems could be.

    Hi
    Possibly its high temperature issue.
    High temperature causes a shut down in order to protect the hardware from damage.
    But the question is why the temperature increases to critical level?
    One reason might be a graphic card driver from nvidia page. Such driver does not contain overheating protection. So you have to use the driver from Toshiba page.
    I see you did it
    Well, the notebook seems to be a new one.so usually the dust should not be a problem and the fans should work properly
    One tip; please ensure that you have enough free space around the notebook to ensure good air circulation...
    However, I recommend asking a ASP in your country for an check maybe its hardware related issue.

  • White Macbook (2008) overheating and shutting down

    Hello,
    I have a white macbook from about 2008 (it is not unibody, it's the one you can remove the battery). My case has cracked all around and little pieces of the plastic have flaked away (as seen on all other 1 year+ macs of this generation). I figure this helps the heat escape rather than make the problem worse but I still plan to get the case fixed on with applecare.
    My problem is that sometimes when running only iTunes and safari my CPU heats up to 90 degrees celcius (194 F) and my computer simply shuts off. I don't have the clear plastic covering vents and I just use my mac on my desk, not on a pillow or anything like that. When my computer heats up like that, the fan is rotating at about 6200+ RPM according to SMC fancontrol. Right now my computer is propped up using a large eraser to create a space for air to circulated along the bottom of the case.
    What can I do to keep my Macbook from overheating? I don't want to damage my computer. I don't really do much video or real intense stuff, mainly just music.
    Any help is appreciated.

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

  • IMac overheating and shutting down when running XP?

    I'm using my iMac to play games in Windows, which stresses the processor a lot-- it heats up like crazy. If it gets too hot, it either locks up or the graphics cut out altogether and I'm left with things still running and responding (I can tell from the sound) and a black screen.
    I don't have these problems when running equally graphics-intensive games OSX-side.
    Anything I can do for my iMac to cool it down a bit, short of playing in a meat locker? (I have a fan blowing directly at the vent on the back, and it mitigates it somewhat.)

    Hi Melissa,
    use either SpeedFan http://www.almico.com/speedfan.php or InputRemapper http://www.olofsson.info/index.html?inputremapper.html for fan control when running Windows.
    Regards
    Stefan

  • Has anyone else had any problems with their phone over heating and shutting down?

    I've had my phone for less a month and I've already had issues with my iphone 4. On several occassions it has overheated and shut down. On one occasion I put the phone in the side pocket of my purse where, I also had a charger for my camera. When I removed the phone, it was hot...not warm but hot! On another occasion I was at the movies and put the phone face down on my lap, at one point i touched the phone and again it was hot. When the movie was over, and I looked at the phone it had shut down....this has happened a few  times more since then. I've also had problems with the phone shutting down on it's own. I took it to my local apple store and the representative looked at my phone and ran a diagnostic check for me. He said the everything on my phone looked normal and that my phone probably needs a "breaking in" period...to give it a couple of months...He really didn't tell me much more...I don't use my phone for more than the basics...calling, texting, and some mild app use...I don't understand how I can be having these problems when I've had my phone for less than a month...The rep tried selling my the Apple insurance. He told me that through ATT I only have 30 days, and I would be better off getting this insurance. I feel very dissastisfied with the service I got. I was done with my appointment within 10 mins, I don't think the representative took the time to listen to my concerns.

    Thanks for your reply, but I guess whether this was a silly question is a matter of opinion. That is the whole purpose having these forums...so that people can post their questions, silly or not. Maybe you are an Apple expert or have "techy" knowledge, but I don't. So what may be silly or stupid for you, can be completely different for a novice apple consumer like me. If you must know, I did do my research, and I did do the basic trouble shooting.All to no avail. I took my phone to the apple store, had it diagnosed and was told some very inaccurate information. I ended up going back today, and got a second opinion. This person actually took the time to talk to me and to better explain Applecare and my warranty. She also told me that there is no such thing as a "break in" period, and when there is a shutting down issue, even after a "restore" that it was better to get it replaced. Which is what she did. She replaced my phone. Obviously, the first person, by his own admission, was too tired and ready to go home to actually take the time to explain and offer other options...

  • V100 overheats and shuts down; shuts down during system diagnostics

    I have a V100 that has been overheating and shutting down when i run applications such as Photoshop and MS Office 2003. It has a 2Gb intel duo processor and 2Gb of RAM. I downgraded to Windows XP with service pack 2. The warranty expired in July 08 and until 3-4 months ago didn't have this problem. It happens with or without the battery, typically I have it plugged in. I took it apart partially and cleaned out any dust by the fan and such, but there was very little. I tried to run diagnostics on it through Lenovo System Toolbox (used to be called PC Dr.). During the system stress test it overheated and shutdown. I then ran the full system scan and when it got to the multicore test for the processor, it again overheated and shutdown. I'm not sure if this is an indication that the processor is failing or if maybe it just needs some thermal paste or if there is another problem going on. Any help would be appreciated.

    Hi
    Possibly its high temperature issue.
    High temperature causes a shut down in order to protect the hardware from damage.
    But the question is why the temperature increases to critical level?
    One reason might be a graphic card driver from nvidia page. Such driver does not contain overheating protection. So you have to use the driver from Toshiba page.
    I see you did it
    Well, the notebook seems to be a new one.so usually the dust should not be a problem and the fans should work properly
    One tip; please ensure that you have enough free space around the notebook to ensure good air circulation...
    However, I recommend asking a ASP in your country for an check maybe its hardware related issue.

  • ZV6000 Overheats and shuts down

    My ZV6100 has started to overheat and shutdown. I have noticed the cooling fans are not coming on as the computer gets hot. However after overheating and shutting down if I wait a few minutes and restart the computer both fans come on and stay on. So it's like this, when I start the computer and its cold the cooling fans come on for a short time (at startup) and then go off. As the computer warms up and then gets hot the fans do not come on as they should to cool it back down. Any ideas?
    This question was solved.
    View Solution.

    Try a hard reset of the bios, power down, unplug the power cord, remove the battery, hold the power button down for 30 seconds, insert battery and connect power cord, power up, see if anything changes.

  • Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its  related to overheating ?

    Just done a replacement of the pata DVD drive (its new and is working ok),  and a fresh clean  install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
    I believe its  related to overheating ?
    iStat Pro shows GPU diode temp at 66 C, CPU at 48 C,  Fan rpms is around 1000
    Any ideas somebody ?
    The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

    1.5-3 minute boot up as opposed to 15-20 seconds
    And
    why it takes a long time to load a lot of things.
    I have restored this
    from a time machine partition.
    TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
    What you need to do to regain your speed is to understand how your machine works
    Why is my computer slow?
    Fix any and all issues in software following this list of fixes
    ..Step by Step to fix your Mac
    Then follow this defrag method I've outlined
    How to safely defrag a Mac's hard drive
    Most commonly used backup methods
    There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
    Hope this assists.

  • Satellite Pro A300D gets to warm and shuts down after short time. HELP!!!

    Hallo together,
    i bought the Satellite Pro A300D notebook 3 weeks ago. Since the beginning I have the problem that the notebook gets to warm and shuts down within an hour!
    I dont run any high performance application and I keep the left side of the notebook free so that the warm air can get away! I already cleaned the heatpipe by using a hoover.
    That couldnt be! I need the notebook for work and thats impossible...
    What can I do? Do I have it to send in?
    For help I am thankfull
    Frank
    Message was edited by: DerVogel

    Hi there DerVogel ,
    Sounds like a Heat related issue ????????
    Whenever it shutdown automatically does it turn on right away ? One symptom of a heat related issue is, it takes about several minutes before you can turn it back on again.
    Here is how you can isolate the issue since it could also be a software related problem.
    1) Turn on the system Tap F2 and boot on the system setup screen ( BIOS )
    2) Just stay on the Bios , If it doest shutdown on the bios then you might need to reinstall windows. or check if system is infected with spyware or a virus.
    But if it does the same thing then the best thing to so is to bring it to a Repair Center or Call Tech support for a depot service repair.
    Cheers ! hope this will help.
    Message was edited by: iSkO

  • My Satellite A660-11M is getting hot, and shut down

    Hello !
    (sorry for my english)
    I have problem with my computer.
    When I'm playing computer games or when I save movie created in Sony Vegas or Windows Movie Maker, my Toshiba is getting hot, and shut down.
    I don't know the reason.
    I saw that, wnen CPU is 50% of use (saving movie in Movie Maker) the computer will shut down about 5 min from start to save.
    I bought this computer in UK in august. I did't format it for 7 months.
    What can I do ?
    Maybe open and clean the fan ?
    Will I lost my warranty, when I only open it and clen ?

    Barrie :
    I usually use my computer on knees, but wneh I put in on desk the effect it that same...
    cooling vents free, not blocked.
    C3PO:
    I use original drivers from nvidia.com I download the latest and install.
    When I used my computer 5 months ago, I did't get this problem.
    notebook was getting hot about 3 months ago ?
    first. When I played game "Mafia2". about 30 minutes playing and computer shutdown.
    Now when I'm playing Call of Duty Black Ops or doing something when CPU use is 50% it getting hot next shutdown.

  • Iphone overheats and shuts down when charging ?

    hello,
    since i have had my iphone 4s replace in april my iphone overheats and shuts down when charging?
    can anyone help?

    My 4S has recently shut down twice so far due to heat: Once in 100+ deg. in Arizona, when I left the phone in direct sunlight too long (that'll kill anything), and once just today, 96 deg. in Colorado, with the phone in my shirt chest pocket, not in direct sunlight. Each time, the phone was also encased in the hermetically sealed "Lifeproof" case, which probably contributed to heat build-up. If you're using a similar case with yours, either make sure to keep the phone in a cooler, shaded area, or just take it out of the case when the temps are this high. Definitely don't leave it in direct sunlight! In my case, although the 4S seems more heat-sensitive than my previous iPhones, I still find this behavior within acceptable parameters. But I wonder whether the overheating episodes might cause permanent damage...?

  • NC6230 heats up and shuts down quickly

    If anyone can please help so I dont spend anymore money on this.LOL  I have a NC6230 that would overheat and shut down after half a minute of so.  I went on EBAY and purchased two other boards and I have the same issue.  Thinking I couldn't have 2 bad boards with the save issue I purchased a curcuit board.  Same issue.  I tried another known good processor with the same results.  I tried swapping memory with no success.  All of these tests were done with the power supply for power and no hard drive or OS.  I then powered it on with the battery only and it stayed running.  I powered it off and restarted with a external keyboard to check the BIOS and it overheated and shut off in 30 seconds.  No clue what else to try.  Is there a defect in the board which provides too much power to the board causing the shutdown?  Is this a defect in this board over time?
    Thanks for any help
    Kevin
    This question was solved.
    View Solution.

    Could be that the coolant is not working correctly.
    A typical heat pipe consists of a sealed pipe or tube made of a material with high thermal conductivity such as copper or aluminium at both hot and cold ends. A vacuum pump is used to remove all air from the empty heat pipe, and then the pipe is filled with a fraction of a percent by volume of working fluid (or coolant) chosen to match the operating temperature. Examples of such fluids include water, ethanol, acetone, sodium, or mercury.
    You can read the hole article at http://en.wikipedia.org/wiki/Heat_pipe .
    Not sure the life expectancy of the fluids.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • My hp pavilion dv1000 (1615ts) has an overheatin​g problem and shuts down suddenly. please help..

    my hp pavilion dv1000 (1615ts) has an overheating problem and shuts down suddenly.  please help..

    with that age of laptop we immediately suspect an issue with dust clogging the exhaust fan or the thermal compound between the heatsink and fan breaking down and needing to be replaced. The laptop needs to be opened and inspected in other words. 

  • UPS and shutting down servers

    Not sure if this thread should be better posted at the OS X Server forum, but let's try it
    Today I found the time to connect the UPS to our XServe via USB. It worked great, the UPS appears at ServerMonitor and also at the system preference panels energy settings.
    However the UPS has only one USB port, but we have currently two XServes. My intention is to keep the servers running as long as possible till the UPS reaches 25 % left of its energy. Then safely shutting down the servers.
    While it is easy to configure this on the server the UPS is connected, I find no setting for doing so at the other system. Basically the "master" XServe (that connects to the UPS) should shut down its "slaves" (the other XServe specifically).
    I already dealt with a quite old system some time before (Cobalt RaQ) where it was able to set this up (via the MAC addresses if I'm not wrong).
    I would look forward if someone can give me a glue how to realize this on the XServe ?

    >Okay, writing a script... I guess you don't have anything already written
    Nope, sorry.
    >The main problem would be that both servers can communicate with each other only by using their WAN IPs. So we would need to get some security (like authentication with a username and password) additionally.
    If your servers have two NICs, there's nothing preventing you from creating a private network between the two using a simple ethernet cable between them. That way they can communicate privately.
    > When I connect the UPS with an USB hub and on that hub both XServes, could this work ?
    No. USB doesn't support this kind of topology. There can only be one bus master. The other machine won't work.
    >The UPS also has a serial interface, just the XServe lacks of this "old technology"
    On the contrary. The XServe has a 9-pin serial interface on the back. It's normally configured as a console port for out-of-band management but you can configure it as a standard serial port by disabling SerialTerminalSupport (in /System/Library/StartupItems). However, the issue is then how to read the serial port. I'm guessing the software that ships with the UPS is designed to use the USB port and you may be on your own there.
    >By the way, I should mention that the UPS is a Belkin "Universal UPS".
    I don't think it makes a big difference. You'll have the same issues with any UPS vendor.
    The only other option I can think of is a network-aware UPS. Some UPSes (such as those from APC) have a network option where you can query the UPS over the network. It would then be relatively simple to query the UPS via SNMP to gauge its runtime and shut down safely. I don't know if the Belkin has this option.

  • If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load

    If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load the tabs or if it does and I then try to add the game or any other site at all on a tab it causes firefox to stop working (though not close) and I have to restart opening and closing it many times to get it to work at all.

    1st, you will not be able to activate your PPro1.5 on ANY new computer, see next link for the special version you MUST use
    CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    2nd, you already mentioned Virtual XP, so if a direct install doesn't work, that would be the way to go... or, to just do what SHOULD work from the start, just do Virtual XP

Maybe you are looking for

  • [JS CS3] can windows be stacked?

    Hello, I have a script that calls up a window, let's name it Master. The master in turn has many buttons to run many scripts. The scripts that take a long time to run also call up a window that states "Wait a sec, I'm working." It closes once the scr

  • Call Adapter Error

    Hello everybody, I have a synchronous scenario ABAP Proxy->XI->RFC, the reason why we used XI it's beacuse by company politics any systems integration needs to go by SAP XI, and the reason why we used RFC in the receiver system it's because by compan

  • Time Zone Conversion with out using function and with out alter

    Hi All, I am able to see 1Hr difference in my date fields of SQL output because in UI (User Interface)  date field was stored in BST format but DB time zone is in GMT format so can any one help me to find a solution for 1 hr difference, here i don't

  • How to use BAPI_INB_DELIVERY_CONFIRM_DEC do batch split

    Hi, everyone: I want to do batch split in inbound or outbound delivery by function. I found BAPI_INB_DELIVERY_CONFIRM_DEC, but our system is not a Decentralized System and I wandered in so many parameters. How to use this fuction? Thanks.

  • I am so mad

    I am thoroughly frustrated.  I have been nothing but a good customer to Verizon and they are holding and cancelling all my orders.  I call the fraud department and they have no answers for me.  This is an awful way to do business verizon and I am mak