Satellite L300 (PSLB9A) - No internet access after installing Vista SP2

Just upgraded my Vista with Service Pack 2 and found that I cannot connect to any internet sites, have proved it is SP2 by rstoring to prior SP2 and all is OK, also reloaded the OS with my recovery disks and all works OK...... ....until I load SP2 then when I try to access the internet I cannot, getting "IE cannot display the webpage".
Diagnostics report no problems found. This happens with either IE7 or IE8, firewall is disabled and I can reach any network device including my server but am unable to load the server web page, same issue..
Any assistance would be appreciated.
Pete

Hi Sascha
Yes I rolled it back to SP1 last night as I could find no way to fix the problem, I've never seen this before. Anyway all now works OK with SP1, before I rolled back I also rolled back IE8 to IE7 (no change) and removed, one by one the updates post SP2 install (also no change), as soon as I had rolled back to SP1 all worked fine, can get instant internet. I am going to load IE8 tonight and see if that works OK.
As for Skype MSN, no did not try those while SP2 was loaded, should have tried my skype account.
Any thoughts?

Similar Messages

  • DW CS3 preview issue after installing Vista SP2

    I have DW CS3 installed on my desktop and laptop computers. One computer uses vista64 and the other vista32. After installing vista service pack 2, I now have the following issue previewing PHP pages under Apache: All browsers give me a "cannot display the webpage" error UNLESS I am connected to some kind of network--it could be the internet or my peer-to-peer network. My destop computer is attached to a printer via RJ45 cable. If the printer is turned on, I can preview webpages in DW. If the printer is turned off, I cannot! Or, if I am connected to the internet through my wireless internet card, I can preview pages, otherwise, not.
    Previous to installing SP2, I was able to preview pages on both computers without the need to be connected to a network, so I am pretty sure that SP2 is involved in this new issue.
    When Apache and MySQL start up in the XAMPP control panel, there are no errors, and I can go into PHPMyAdmin just fine.
    Has anyone else run into this? Any thoughts?

    I'm just following up here. I have not solved the issue, but I did figure out that the problem isn't with vista service pack 2 but with Kaspersky anti-virus 2009.

  • No Sound After Installing Vista SP2

    I installed with Vista SP2 update yesterday and now I have no sound. It seems to be a driver problem but updating the driver does not fix it. There is a red "x" by the speaker icon on the task bar and the volume buttons on my keyboard dont work.
    The Conexant HD audio driver says that it is installed properly but I have no volume.
    Microsoft seems to be aware of this problems and has a few fixes out (like http://support.microsoft.com/kb/948481/) but nothing they have published is helping me.
    Please help as I really need to have my sound up.

    This message can be closed - though, not sure if I am able to do myself.  I uninstalled the IDT Codec, did a full shutdown, then started back up, let windows fully load, was prompted for installing of the Codec by Windows, clicked to allow the installation to occur and the codec/driver was successfully installed.  I have my sound back!   Fantastic!

  • No Internet Access After Installing iTunes 10

    Since iTunes 10 was installed on my machine two days ago (Windows 7 Ultimate) iTunes cann't access the internet (radio, help etc). Otherwise my internet connection is OK.

    As polydorus suggested, it's quite possible that this is not a problem with iTunes but instead a problem with a firewall or privacy/Internet filter. Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
    Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure. If you have Norton, you can find instructions for that utility on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
    Hope this helps.

  • Limited internet access after installing drivers in boot camp

    I bootcamped my mac and figured out the internet connection issue. After I connected to the internet however the connection has limited acces and won't open any pages. Can anyone help me with this issue?

    Hi slausty,
    usually installing a graphic card driver in Windows should not have any effect on your OSX since the WIndows driver is only loaded and used when using Windows.
    You first might try a PRAM reset of your MBP since the display settings for OSX are stored in there.
    Next you should consider downloading the BootCamp Driver Updates 2.1 and 2.2 from Apples website.
    Before installing them though a backup of your Windows or at least make a 'System Restore Point' in Windows to revert back easier if needed.
    Regards
    Stefan

  • No internet access after bootup on some clients.

    Hi,
    Some of our client pc's do not have internet access after bootup in the morning. The quick solution is to login as administrator disable & re-enable the network adapter and than everything is fine for a few more days. There is nothing showing up in the
    event viewer and it doesn't always happen. 
    Can anyone advise on how best to track down the problem?
    Thanks.

    Cheers, I noticed that the DHCP role is installed but the service has stopped. When I start it, it stopped straight away.
    I think that's because the router has an ip address of 192.168.0.1 and sbs server currently has an ip address of 192.168.0.10. Do I have to change the router ip address to something else and set the server to 192.168.0.1?

  • Webmail is not working internet explore after installed sp3 exchange 2007 roll up 15

    webmail is not working internet explore after installed sp3 exchange 2007 roll up 15 but mozill firefox webmail is working fine

    Hi,
    Does the issue happen to all users? What’s your IE version? Is there any error when you access OWA 2007 in IE?
    Please click Compatibility View settings in your Internet Explorer. Then, add the OWA site to the list of sites to be viewed in compatibility view and check whether the issue persists.
    Regards,
    Winnie Liang
    TechNet Community Support

  • No internet access after hard reset.

    I hit the hard reset button on my router and now my computer & other devices can not access the internet. I can connect to my router but have no internet. It was working fine earlier today until it was hard reseted.
    I ran windows troublshoot and I got: 'The network gateway is accessible, but Windows couldn't receive network traffic from the internet."
    Solved!
    Go to Solution.

    All my devices finally gained internet access after again hard reseting my router and then power cycling my modem, router, and pc. Thanks Eddie 956for not giving up on yourself! 

  • No internet access after 7.2.1 Firmware Update

    I can not get internet access after performing this Firmware Update. I have a green light on my Airport Extreme, and in the System Preferences Network pane it states that I am connected to the internet via Airport. Has anyone else had this problem and been able to resolve it?
    I have a cable modem and have reset it several times. I have also uploaded the firmware update again. I've tried to go back to the previous version of the firmware but it does not seem to be available anywhere, and does not show up as an option in the Airport Utility using Manual Set Up option.

    I have the same problem. ATT DSL modem. Updated my firmware and lost all connectivity. If I bypass the AEBS, it works just fine. Also lost my Apple TV in iTunes after the update. Frustrating!
    Let me know if you figure it out.

  • I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

    I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
    After +/- 10 to 15min my connection is gone.
    Does anyone have a sollution?

    Lots of people are having the same problem, you're not the only one, belieeeeve me.
    Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
    It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
    So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now.  I already posted  a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
    i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
    Site:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • No Wireless or Ethernet Driver After Installing Vista Ultimate on New Mac

    After installing Vista Ultimate 32 bit on my 17" 2.6 GHz MacBook Pro (486 gb hard drive, 101 gb bootcamp partition), (4 gb ram) The Vista Installation has no Driver Listed (or connectivity) for either the Apple Wireless or Ethernet drivers.
    Any thoughts?

    Did you install the drivers from the computer's software install DVD?
    Please post further questions regarding Boot Camp in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

  • Re: Satellite L300 - camera is not working after upgrading to Win7

    As in subject. Camera wont work after upgrading to Windows 7. I have tried almost everything found on Internet. The drivers are installed.
    There is no exclamation mark in system.
    Satellite L300 (PSLB8E)

    Hi
    What happen when you start the webcam application?
    All Programs -> Toshiba -> webcam
    Did you install some other 3rd party software like for example Skype which would access the webcam?
    Additional tip: go to BIOS and set it to default, save the changes and then reboot the notebook.
    Start for example Skype, check the Skype settings if webcam has been chosen properly.
    Would be really interesting to know if other software would be able to use the webcam.
    By the way: did you install the Toshiba Face Recognition? This software use and access the webcam as well
    So sometimes it could be possible that this software would block the webcam and the webcam tool could not work

  • Why no internet access after Safari reinstallation (router does)?

    Since yesterday I have a massive problem I hope someone can help me out.
    To start with I couldn´t email attachments since a few months. Yesterday I thought a re-installation of Safari (browser recommended by the provider) might cure that as I thought recent upgrades (recommended by apple to install) caused that problem which was not there last year.
    So I downloaded Safari from apple.com. From that on I can´t get any internet access anymore (only a few minutes after the first start, then never again), even after spending 40 minutes on my providers extremely expensive hotline no solution (other than that the friendly lady told me to contact this forum). My router has internet access, and the cable between router and my Mac is definetely fine, but when I open the internet-access window, the connection immiadetely crashes always.
    I checked network utilities and found no failure, I tried different ways of access via the network settings, nothing works. I assume it has something to do with the re-installation of Safari, but why on earth should the standard Safari 1.2-version from Apples own website create such a mess?
    Shall I install firefox? Shall I dump the Safari-version installed yesterday and install a copy of the updated version from my office computer instead? What else could cause the problem? Are my network settings wrong? Should I log in via "manual" or DHCP (the provoders hotline told me I should re-type PPP settings. Though that is clearly to see a no-option with Ethernet she kept telling me so. Isn´t PPP only for modem-connection?), or via PPoE? Or shall I re-install the router?
    I would be more than glad if someone could help me.
    I-Mac 20"   Mac OS X (10.3.2)  
    I-Mac 20"   Mac OS X (10.3.2)  

    We can keep it in English as its an english speaking forum and therefore non-germans who might have the same problem could participate. If for you German is better I´m fine with it. Most settings on my Mac are in German so if it becomes too specific, german is anyway necessary.
    Thanks,
    Nobbi

  • Satellite L300-145 - BSOD appears if I install 4GB RAM

    Hi all
    i have this Satellite L300-145 PSLB0E-03601LPT and I want to install 4GB RAM but when I install 4GB on SO boot BSOD appears.
    I try to change with other brand memorys with equal modules, I try to install Windows 7 64bit, Linux 9.10 64bit and it the same things. I try also to update BIOS but it the same.
    I think it is Remap memory feature on bios but doesnt have that option.
    So what i need to do?
    My laptop have now 3GB
    CPU: T2390 1,86Ghz 533Mhz
    CHIPSET: GM965
    RAM:2GB DDR2 533Mhz
    HDD:Hitachi 200GB
    After upgrade
    CPU: T8300 2.4Ghz 800Mhz
    RAM: 2GB DDR2 667Mhz
    HDD: Seagate 7200.4 250GB
    I realy need 4GB

    Im sorry i confuse with other chipset.
    But if i can get 800Mhz and 3GB 667Mhz Dualchannel its very good.
    But i dont understand the BSOD.
    This is my test:
    1) I install 3 difrent 2GB modules and i get the same BSOD on boot OS, but i can enter on bios and i can see on memory info. 4096MB.
    2) I try to instal 3GB and laptop boot well but i find one problem if i put Bank0:1GB and Bank1:2GB laptop boot ok but if i swap i get the same error BSOD.
    I think one slot cannot address 2048MB of size.
    If i install only 2GB on that slot i get the same BSOD.
    I have 3 tips of ram
    2GB 533Mhz 667Mhz and 800Mhz with difrent brands and chips.
    why i this BSOD only appears on boot OS and i can enter on bios without a problem?
    Sry for my poor english
    Best regards

  • Cannot connect to college network after installing Vista business on Satellite A215

    I have a Satellite A215-S4757, which i brought with me to college, I was told that the college's server has a problem running on vista home, which is what I had, currently the wireless is down, so after installing business and connecting the ethernet cable my notebook does not pickup any of several networks available, wireless or otherwsie

    What to say you can also access the network using Vista.
    But please note that the Vista OS supports additional network access security settings which must be either disabled or reset.
    This How to website released by Microsoft should help you to configure the network settings with Vista:
    http://windowshelp.microsoft.com/Windows/en-US/networking.mspx
    Here several hints:
    You should try to Open Network Diagnostics by right-clicking the network icon in the notification area, and then clicking Diagnose and repair.
    The Vista supports additional firewall options. Please disable it while trying to connect to the server.

Maybe you are looking for