Satellite L300 - 'W' and 'F' Keys not working - can't log
Hi,
I have a Toshiba Satellite L300.
My 'F' and 'w' keys arent working, and because I have a Built-in HDD user password of which contains those letters, I can not start up my computer.
I had a 'startup' problem a couple of months back, and what I had to do was restore my laptop to a previous date. I did this through Boot management during startup. The only thing is I cant remember how to do it now.
I cant find any restoration disks that may have come with my laptop- so the only way I can do it is through boot management.
So, how do you do a system restore? or is there another way of fixing this problem?.
Please help!! :)
Hello
If W and F key dont work I would recommend replacing the keyboard or use an external one. In my opinion its the best choice because you also need the keys for typing letters or emails
You can get a new keyboard from an authorized service provider in your country.
> I cant find any restoration disks that may have come with my laptop
I think you should read the user manual because you have to create this disk yourself ;)
Similar Messages
-
space.anddelte
space.and.delete.keys.not.working.on.wireless.keyboard.help!Before replacing the keyboard do 2-3 SMC resets using the instructions in iMac SMC and PRAM reset
-
Volume and brightness keys not working with new keyboard on imac
I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.
Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.
-
Satellite L300-147- Manual volume control not working
The manual volume control on the laptop is no longer working. If I try to adjust the volume (on the right the headphone plug-ins)- I just keep scrolling. As a result, I can only watch DVD on a really low volume level. I have adjusted volume control under "control panel" to the maximum level.
Any ideas to fix this please?Hello
> The scroll for volume control on the laptop keeps scrolling on empty (it can't reach the end)
Believe me buddy, this is absolutely normal.
I have Satellite L300 too and I can still scroll the volume control although the sound is on lowest level (I can see this in Windows sound properties).
To be honest I didnt have any notebook as yet where the volume control ends on a certain point.
Greets -
"backspace," "g" and "h" key not working
Hello,
Suddenly the "backspace," "g" and "h" keys stopped working. Due to this issue, I can't log in to use my computer.
Please, help.
I have a Pavilion g7-1260 us Notebook PC, Windows 7.
Please help becasue I can't use my laptop at all.
Thanks,
Carlos-ManuelHi Carlos,
Well, to get logged in (assuming your PC is at least booting up to the Windows Logon screen), you can try to use the On-Screen Keyboard, just click on the Ease of Access button (should be on the lower left hand side of the logon screen) and put a check mark in the box next to "Type without the keyboard" and select OK. This should bring up the On-Screen Keyboard and allow you to enter your user name and password. Note that I'm assuming here that you couldn't get logged on because either your user name or password or both uses one of the keys that isn't working.
Alternatively you can also just connect an external USB keyboard, like what you might use with a Desktop PC.
That should at least allow you to use your computer somewhat.
To test your keyboard, reboot the computer and press F2 to access the UEFI diagnostics. You can find the full procudure in this document:
Testing for Hardware Failures (Windows 7, Vista)
If you don't have the lastest UEFI diagnostics installed on your PC, you can get the download here for your model PC:
HP Unified Extensible Firmware Interface (UEFI) Support Environment
There is a keyboard test under system tests, it may take a while to get through the test procedure, but it will verify if the keyboard hardware is functional or not.
If the keyboard test all pass, but you still have problems with some keys on the keyboard, check that the keyboard language has not been changed. Go to Start --> Control Panel, choose "Change Keyboards or other input methods", then click the Change Keyboards button. Based on your model, you should have the English (United States) - US option selected. If some other keyboard is selected, that can cause some weirdness with your keyboard.
Good Luck!
Although I am an HP Employee, I am speaking for myself and not for HP. -
HP G62-348CA number keys and arrow keys not working
Good day Experts! Can someone help me fix my laptop? I got G62-348CA unit. only number 5 and 6 in my number keys are working and also arrow keys down and right are not functioning. at first it was built with windows 7 home premium 64bit but then i have to reformat my laptop with windows 7 ultimate but i dont have available 64bit so i install 32bit of the OS. before i install the OS, number keys and arrow keys are working fine but after I reformat my laptop with ultimate 32bit, the said keys are not working. please guys help me. im having trouble with my unit and i dont know what to do. its pretty bad i dont have any idea. all the best with you guys and i'm hoping for your fast and kind response. thank you!
Because the operating system does not affect the keyboard in that way . .. If the operating system has issues it would switch keys or assign wrong characters.
I have replaced over 200 keyboards because of such issues -
While Logging Clips, "I" and "O" keys not working to mark clips
In FCP 5, I am logging clips
in Capture Window in order
to set up a Batch Capture
I am not able to mark the clips'
In and Out points using the
"I" and "O" keys
although I can by using the cursor
to click in the Logging Tab of
the Log and Capture Window
how do I use the Keys?
thanksThey might be working fine and you might not know it.
Mark i, play tape down mark o, hit log clip, give it a name and accept it and see what happens, if nada, write back. -
E545 and Function key not working
Any help here is apprecited. My function (Fn) key is refusing to work at all. None of the special features are able to be used. I've checked all my drivers, and followed the instructions in the User Guide, but some of the options described in the guide are even showing on my computer.
I'd love for some help on this issue, as the computer is pretty worthless right now.Hi Jamesbjenkins,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with keyboard function keys not working on your ThinkPad E545.
Is the system updated with all the latest drivers and application? To confirm with I request you to run ThinkVantage system update tool. This will search for all the required drivers and application for your system and will update.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Satellite L300 1BD - VGA output is not working
Hello.
I have a Toshiba Satellite L300 1BD (Model PSLB8E). I was usinng the VGA output to connect to my LG tv. It worked fine until last week. All of a sudden the TV doesn't get reckognized by the laptop anymore. The TV says that no external device is connected. I have tried different things: starting up with the TV connected and not connected through the VGA cable, pressing the FN+F5 button, removing the battery and pressing the powerbutton, checked for the latest videodriver, removed the existing driver and installed it again...unfortunately without any result. I also tried to hook the TV up with a different VGA cable, but no result. It's not the TV, because i did try to hook the laptop up to a TFT monitor and it didn't work as well. Tested the VGA cable with my friends laptop: it works perfect.
The strange thing is: if i hook the TV up to the laptop, i can hear the laptop is making the 'new hardware detected' sound and the laptopscreen even turns black for a second, then everything appears back on the laptopscreen. If i check the graphic properties with the rightclick on my desktop, i can see that they are no set for 'clone device'. As if the laptop knows, something is connected, but just can't transfer the image to the TV screen.
The graphic adapter is a Mobile Intel 4 Series Express Chipset family.
The OS is Vista Home Basic (32).
It's a shame the VGA output seems to be out of order since i watch tons of video's and movies through my laptop on the TV screen. I don't know if this could be a software or a hardware malfunction. If anyone has an idea or some clue, please let me know. Thanks in advance!
Marcin.Hi,
I would like to give my 2 cents to this post (and the answers from Toshiba):
>{quote}I have a Toshiba Satellite L300 1BD (Model PSLB8E). I was usinng the VGA output to connect to my LG tv. It worked fine until last week. All of a sudden the TV doesn't get reckognized by the laptop anymore. The TV says that no external device is connected. I have tried different things: starting up with the TV connected and not connected through the VGA cable, pressing the FN+F5 button, removing the battery and pressing the powerbutton, checked for the latest videodriver, removed the existing driver and installed it again...unfortunately without any result. I also tried to hook the TV up with a different VGA cable, but no result. It's not the TV, because i did try to hook the laptop up to a TFT monitor and it didn't work as well. Tested the VGA cable with my friends laptop: it works perfect. {quote}
> {quote}The strange thing is: if i hook the TV up to the laptop, i can hear the laptop is making the 'new hardware detected' sound and the laptopscreen even turns black for a second, then everything appears back on the laptopscreen. If i check the graphic properties with the rightclick on my desktop, i can see that they are no set for 'clone device'. As if the laptop knows, something is connected, but just can't transfer the image to the TV screen. {quote}
>{quote}The graphic adapter is a Mobile Intel 4 Series Express Chipset family.{quote}
>{quote}The OS is Vista Home Basic (32). {quote}
>{quote}It's a shame the VGA output seems to be out of order since i watch tons of video's and movies through my laptop on the TV screen. I don't know if this could be a software or a hardware malfunction. If anyone has an idea or some clue, please let me know. Thanks in advance! {quote}
I have exactly the same L300 19F with the same graphic adapter, only with Windows 7 Ultimate (32) and was watching DVD's through my Toshiba TFT TV-set/VGA Monitor for a couple of years as well as all of a sudden it doesn't work anymore. The same as the gentleman who started this thread I checked everything there is to check: my laptop/another screen, another laptop/my screen, drivers, new cable, even installed the (original and licensed) W7 OS again etc. etc. etc. TO NO AVAIL !!!
Since this is the first time that I can't solve a technical computer problem in more then 25 years I got mad and started to think what the heck I did different over the last few weeks, and now I think I know the culprit.
One day, a few months ago, I saw a warning in my screen to flash my BIOS with a new upgrade from the Toshiba website. Having seen that message for several months I did not give it much attention because everything worked fine, and the reason given for the update was a quote "password protection update" unquote, a function I don't use anyway and that's why I didn't run that fast.
After a while I decided to flash the BIOS, just to get rid of the annoying message and now I am quite sure that it really did kill my VGA output capabilities.
So, instead of the nice "Check your Power Cord" and "Go to the Official Toshiba Dealership" hints, maybe there is some technical solution. Maybe there might even be a nice technical Toshiba person have a look into the BIOS update and what the heck the differences are with the old one.
At the very least you could offer a "downdate" of the current valid BIOS for this type, because everything used to work pretty good and, as a 25 year long time customer of Toshiba laptops, I could be entitled to a little better (quality) answer.......
My friend Marcinondrums and I still have hopes.
Thank you !!
/Hans -
Satellite A200-14D PSAECE - Fn keys not working & other function keys
Hello,
1) i am asking for your help about installing my Fn keys drivers for my Satellite A200 14 D PSAECE laptop.
My OS is Windows XP and i have Bitdefender Internet Security 2009 .
From the download page of Toshiba drivers i got all drivers for my laptop (36 of all - or close), but from the many Xp reinstalations i have done on my laptop, only one time all Fn keys worked when pressing Fn+key and the corresponding icons appeared on my display. I have read some forum topics and i understand there is a problem about the order in which i have to install them ( i already installed them all but it is not working ), so i need someone to tell me which are the drivers for Fn keys only and in which order to install. Please do not forget that i can deactivate my Bitdefender but not uninstall .
2) the same problem with the preset buttons above the keys - On-Off, Internet, Media Player, Play-Stop-Rewind, i need the exact driver and the order.
Thank you for your time :)
Sorry if this question is already answer in the forum somewhere, but i could not get this exact answer.so i need to install every name of driver or utility that appears twice with the same name but made by different companies ?
I will write down how it is described in the text file with instalation instructions, then i will mark the ones that are available for dld with *"i have it"*, also the order that i will install will be the ascending order of numbers at the beginning of each driver/utility, the ones that do not appear in the dld page of Toshiba will be marked *"unavailable for dld"* . +Can you please check the order of ALL that are "i have it" and the ones with questions and confirm if the all drivers are prezent here with the correct order of instalation ?+ Thanks :)
INSTALL ORDER
No. Component Name Version
2 VALUEADD folder Service Pack2(RTM) -----------------------unavailable for dld
3 SUPPORT folder Service Pack2(RTM)------------------------------unavailable for dld
4 Microsoft Internet Explorer ---------------------------------------------unavailable for dld
8 Step by Step Interactive Training(Pro) for ENG version------unavailable for dld
9 SLP Module OEMSLP2.0 ----------------------------------------------unavailable for dld
10 Microsoft .NET Framewor-----------------------------------------------unavailable for dld
12 Intel ICH8M Chipset Utility----------------------------------------------i have it
13 Intel 965GM VGA Driver ---------------------------------------------i have it
14 Realtek ALC268 Audio Driver -------------------------------------- i have it
15 Realtek 10/100 8101E, Gigabit 8111B LAN Driver ---------i have it
16 ALPS Touch Pad Driver ---------------------------------------------number 16 and 17 both have to be installed ? they are with the same .
17 Synaptics Touch Pad Driver ---------------------------------------
18 TI Card Reader ---------------------------------------------------------i have it , it is named "Flash Media Driver"
19 UPEK Finger Print ---------------------------------------------------unavailable for dld
20 Chicony Camera ---------------------------------------------------------i have it , it is named "webcam driver"
21 Intel(R) Matrix Storage Manager (AHCI) ---------------------------i have it but it says i don't have the hardware for this driver
22 iMSM.reg ---------------------------------------------------------------unavailable for dld
23 TOSHIBA Software Modem ---------------------------------------i have it
24 Atheros Wireless LAN Driver ---------------------------------------number 24, 25, 26 are all in driver named "Wireless Lan Driver"
25 Intel Golan Wireless LAN Driver-------------------------------------
26 Intel Kedron Wireless LAN Driver --------------------------------
27 Bluetooth Monitor -------------------------------------------------------i have it
28 Bluetooth Stack for Windows by Toshiba --------------------i have it
29 Atheros Client Utility --------------------------------------------------number 29 and 30 both have to be installed ? they are with the same name "Wireless Lan Client Manager"
30 Intel PROSet Utility --------------------------------------------------
31 TOSHIBA Assist --------------------------------------------------------i have it
32 TOSHIBA Hotkey Utility --------------------------------------------i have it
33 TOSHIBA Accessibility--------------------------------------------------i have it
34 TOSHIBA Hardware Setup Utility --------------------------------i have it
35 TOSHIBA Supervisor Password --------------------------------i have it
36 TOSHIBA Fn-esse -------------------------------------------------unavailable for dld
37 TouchPad ON/OFF Utility -------------------------------------------i have it
38 TOSHIBA Controls (6 button) ------------------------------------ i have two : "Controls" and "Controls Driver". Do i install both ? In which order ?
39 TOSHIBA Power Saver------------------------------------------------i have two with this name in the toshiba dld page. Which one and in which order ?
40 TPS init ------------------------------------------------------------------ what is this ? TPS=Toshiba Power Saver ?
41 TOSHIBA Zooming Utility -------------------------------------------i have it
44 TOSHIBA ConfigFree--------------------------------------------------i have it
45 TOSHIBA SD Memory Utilities -------------------------------------i have it
46 TOSHIBA PC Diagnostic Tool -------------------------------------i have it
47 CD/DVD Drive Acoustic Silencer -------------------------------i have it
48 InterVideo WinDVD5---------------------------------------------------unavailable for dld
49 TOSHIBA Disc Creator ------------------------------------------unavailable for dld
50 TOSHIBA Direct Disc Writer ------------------------------------unavailable for dld
51 Adobe Reader ------------------------------------------------------unavailable for dld
52 Satellite Wall Paper (wide)------------------------------------------unavailable for dld
53 MRK File Tool ------------------------------------------------------unavailable for dld
55 Norton Internet Security 2007 ------------------------------------unavailable for dld
56 TOSHIBA User's Manual Vista version(Dummy for Evaluation)-----------------i have XP, so don't need this
57 TOSHIBA Recovery Disc Creator ------------------------------unavailable for dld
58 TOSHIBA Recovery Disc Creator Launcher--------------------unavailable for dld
So, the problems are at: 16,17, 24, 25, 26, 29, 30, 38, 39, 40.
Thank you. -
Magic mouse and number keys not working
Last year, Wet Baloney had a problem:
I have a first generation iMac with the wireless keyboard of that vintage and a new Magic Mouse.
All of a sudden the keys on the numeric keypad part of the keyboard do not work. The number
keys at the top do work.
Also (all of a sudden) this computer is not detecting my wireless Magic Mouse. There is no battery
problem. The mouse works fine with my MacBook Pro.
Does anyone have any troubleshooting ideas ??
While this question was not answered, Apple decided to archive it anyway so I'm reposting. I had this problem and my sysadmin wizard figured out what is happening. The solution is to open "System Preferences" --> "Universal Access" and select Mouse. Turn off "Mouse Keys". What I don't know is how that got turned on but it happened when I did a Mac OS update that came out around March 28, 2011. Anyway, that fixed both the mouse and the keypad problems. I'm posting so that someone doing the same search I did can find this answer.Thank You for this!! I was having problems using my Numeric keypad on a wired keyboard - when I used the number keys, the wireless magic mouse would lock up - the only way out was to Force Close the Application . . . Turning off "Mouse Keys" and hitting Shift > Clear turned everything back to normal.
-
Windows 7 Brightness and Function key not Working Properly
i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it came with windows 8.1 preinstalled than i installed windows 7 ultimate.
i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe
-
Read Key and Write Key not working as expected with paths on RT
The configuration file VIs Read Key (Path) and Write Key (Path) don't seem to work as expected (at least not as I was expecting them to) on an RT target.
When working on my WinXP PC with these two VIs, paths are translated to what looks like is supposed to be a device-independent format before being written to disk. The path C:\dir\file.txt becomes /C/dir/file.txt when writing and vice versa when reading. On my RT target, however, that same path is written to disk as C:\dir\file.txt, unchanged from the native format.
The translaton of a native path to and from the device-independent format appears to be the responsibility of Specific Path to Common Path and Common Path to Specific Path. These both use the App.TargetOS property to determine the operating system. In the case structure for these two VIs, however, there is no case for PharLap or RTX. (My RT hardware is runnng PharLap; I don't know enough about RTX to comment.) This means that the results of String to Path or Path to String are used without translating between the device-independent format to the native path format.
This isn't a problem if you create a configuration file on one machine and use it on that same machine. I noticed this only when tranferring a config file from my PC to the RT target, where the target would not open the file paths it loaded from the configuration file.
This occurs on 7.1.1 and 8.0. I don't have 8.20 to see if happens there, too.In LV 8.2, this was fixed.
The problem is App.TargetOS returns "Pharlap" on RT systems, and "Pharlap" is handled by the default case ("invalid OS target") in LV 8.0. In LV 8.2 the default case is "Windows 95/NT", however. The reason you could write and read an .ini file on RT in LV 8.0 and earlier is because these two VIs (listed below) were both running the default case of "invalid OS target".
vi.lib\Utility\config.llb\Common Path to Specific Path.vi
vi.lib\Utility\config.llb\Specific Path to Common Path.vi
As you saw, this fails when you perform one operation in Pharlap but the other in Windows. You can fix this by modifying the two VIs listed above. Just go to the case structure and make "Windows 95/NT" the default case. -
Product ID and product Key not working on outlook.
Hello.
So I have a MacBook Pro and I bought Office Mac 2011.
I got it around 2 years ago and I installed Word, Excel, and Power Point with no problems... I didn't install
Outlook at the time because I didn't think I would need to use it. Now I want to
install it and the software is rejecting my Product Key. So I came to the website and typed my Product ID and same thing, it says not working.
I don't know what to do to fix the problem!
Anybody could help me, please?Hi,
Which edition is your Office 2011? Outlook is not included in Home & Student version:
http://www.microsoft.com/mac/buy
If you want to receive more information about Office 2011 , I recommend you post this problem in Office for Mac forum:
http://answers.microsoft.com/en-us/mac
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share
their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support -
Enter and shift keys not working. HELP!!!
A few days ago my mouse started behaving erratically all of a sudden. It would move by itself, click apps, and switch tabs rapidly all on its own. I've had this computer for over 2 years and this has never happened before. Restarting and rebooting into safe mode didn't work, but one user suggested a PRAM reset and that fixed the mouse problem. However, my enter and shift key on the right side do not work now (this is much less annoying than the mouse problem, but still very inconvenient!). Restarting the computer and doing another PRAM reset doesn't work unfortunately. I also used the keyboard viewer to confirm that all but those two keys work. I don't think the issue is with keyboard lint because both keys worked fine before I tried the reset. Booting up in safe mode also doesn't fix the problem. It would be great if I could find a way to fix this here since I won't be able to go to an Apple genius bar until December!
Hello sandi3s,
The troubleshooting detailed below may help restore functionality to your MacBook Pro's keyboard.
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
Cheers,
Allen
Maybe you are looking for
-
I am at my wits end trying to install PageMaker 7.0 on my new laptop with System 8.1. When the disk is inserted, there is a long list of files. Other times it takes me to the Installation menu - which will not open when I click on it. My PC is also
-
Has anyone managed to get play count/last played to sync?
I can live with the podcasts being borked, it's prompted me to use an app (hello iCatcher!) which I had been planning to do for a while. I'm still learning its ways, but it feels a lot more comfortable already. The thing that I absolutely cannot unde
-
IPhoto '11 and previous version Projects missing their linked photos
This concerns iPhoto '11 (9.2.1) running under Lion 10.7.2. Fully maintained. For the past couple of years my wife has been making iPhoto hardcover books ('projects') using photos from within various versions of iPhoto. Yesterday she completed her la
-
hi all, i had made a cancelation to a billing document but this cancelation did not generate accounting documents and at document header status i found the posting status ( error in accounting interface) so can any body tell me why this happened and
-
Can't save 24 x 36 ai version 9 file when opened in CS6
Can't save 24 x 36 ai version 9 file when opened in CS6, even when opened as an outline format. I was able to save the file when reduced to 8 x 11, once saved I resized it back to 24 x 36 but it still didn't work. Any help would be greatly appreciat