Satellite L300D-135 - Certain keys stop working after several minutes

Satellite L300D-135 (PSLC8E-02P013EN) model laptop, on cold boot the keyboard is fine. As things warm up the R and Y keys stop responding as do the 7890 keys. Might be heat related.
The keyboard has been replaced but both old and new do the same thing, so it's more like a controller problem. Have flashed BIOS to latest as saw mention of keyboard issues in one of the BIOS releases. End user has been tolerating this for some months but dyslexic child now needs to use laptop and cannot cope with dead keys.
Any ideas? Laptop is 2 weeks out of warranty and end user just asked me to take a look, problem has been around during warranty period.
Phil

Hi Phil
Can you notice the same issue if you connect an external keyboard or does this happen only with an internal one?
I cant imagine that this has something to do with the heat but if you want you can clean your notebook using compressed air spray. This could blow out the dust from the cooling ventilators.
If not you have to replace the whole keyboard. Normally its not so expensive so dont worry about this. You can also ask your ASP if they can repair it as gesture of goodwill.

Similar Messages

Usb keyboard keys stop working after 10 minutes on mac mini osx lion

I am using a mid-2010 mac mini with opitical drive, updated to OS X Lion. Within the last two days I noticed a certain section of my wired keyboard eventually stops working. These are the right arrow key, as well as the 1, 2, 3, zero, period and enter keys. The virtual on-screen keyboard works just fine. I've come home from work and powered the mac and all keys work fine for ten minutes so it can't be that the keys are worn. I was going to take it to Apple Store genius bar but now I can't tell if it's the hardware or the lion software that's buggy.

I had terrible problems last year with the USB ports on my 20" display. They were made worse when I installed a USB 2.0 PCI card in my G5.
At the time the advice I got was that I should avoid using the display as a USB hub. Apparently the ports are only intended for devices relating to the display (whatever that means). Ridiculous if you ask me. I succesfully use my Cubase SX dongle in the back of the display but that's all.

My "9-o-l-." keys stop working after startup, and spreading! ahh help?

My "9-O-L-." keys stop working after startup and my arrow keys too.
Sometimes when I start up the keys will work for a bit then one by one stop functioning and then randomly work every so often, then it seems to "spread" to the right shift key, and sometimes the "8-I-K-," keys.
Around the same time when this all began my Battery completely stopped working too, does this have anything to do with it? I've reset my PRAM and no luck.
I'm planning on replacing the keyboard, will that fix the problem? or is it something deeper?
Thanks in advance!
-Andrew

I assume you've rebooted? Can you control the computer well enough to make a new account and log into it? Doubt this will fix it but maybe. The keyboard may need replacing but it might also be that the cable has worked loose so that some of the wires have disconnected but not all. Sounds like a trip or call to Apple is in order.

My lightroom 4 stops working after a minute or so every time I turn it on. What can I do?

My lightroom 4 stops working after a minute or so every time I turn it on. What can I do?

Hi rob
I tried reinstalling and the same thing happened. After about 30 seconds, it just stops working? any ideas?
Thanks
Maddi Love
Date: Mon, 10 Dec 2012 22:35:27 -0700
From: [email protected]
To: [email protected]
Subject: My lightroom 4 stops working after a minute or so every time I turn it on. What can I do?
Re: My lightroom 4 stops working after a minute or so every time I turn it on. What can I do? created by Rob Cole in Photoshop Lightroom - View the full discussion
Did you try reinstalling Lightroom 4?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4911298#4911298
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4911298#4911298
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4911298#4911298. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Satellite A105 Shift Keys stop working after BIOS update

I have a stack of laptop boards from the A105 series (Intel chipset) that I received with bad BIOS's. Two worked, and I updated the BIOS's on them to fix CPU compatibility issues. After that, the shift keys stopped working, and pressing Shift-A causes the power light to dim. Reverting to ANY previous version BIOS, whether through the Windows program, CD, or Crisis Recovery floppy (magic key is "F", not "B", "Esc", or "U"), does not fix the keyboard problem.
To make things more confusing, I did notice that the one single BIOS that seems to actually correct the problem is version 1.50, which I haven't seen available for any Tecra A7 or Satellite A100/A105, except a couple A100's, but the BIOS file is much too small and can't be loaded.
Does anyone have any idea why these Intel-based boards are doing this? Or does anyone know where I can get a usable version 1.50 BIOS?
For the sake of this post, please consider my skill level to be high. (In other words, I would be thankful for people trying to help with "Replace the keyboard", but I have about a dozen keyboards, all of which I have tried, and all of which work on other laptops. Additionally, if you have just a theoretical solution, I'm definitely open to hearing it. Also, if a Toshiba tech would like to reply, I would very much appreciate it!)

Hi, thank you for your help.
Some motherboards were not in chassis when I got them. Is there a place the PSAAxx model number would be written on the boards?
Four PSAA8U (Two A105-S4334 and Two A105-S4014) - Intel Chipset, fingerprint reader. Tried BIOS Versions 1.40, 1.70, 2.00, 5.10, 5.60, 5.90, and 6.00. Shift keys do not work on either one.
Two PSAA2U (A105-S2091 and A105-S2031) - ATi Chipset. BIOS versions 1.50, 1.80, and 2.30. Keyboard works.
Another PSAA8U (A105-S4184) - Intel Chipset, no fingerprint reader. BIOS version 6.00. Keyboard works.
I noticed that so far all of the models with fingerprint readers have the problem. All of the ATi Chipset boards are working fine, but they have significant processor limits. I am in the middle of updating the BIOS in another Intel one using a Crisis Rescue Disc, so after that finishes I will try disconnecting the fingerprint reader to see if it has an effect.
I don't think the keyboard controller is faulty, because these boards all failed on the same day. I have tried updating the BIOS using WinPhlash, Phlash16 in DOS, the install CD, and a Crisis Recovery Disk. I set the defaults in the BIOS almost every time, and I also have tried holding the power button for 60 seconds with the power cord unplugged and the battery removed (as some people have suggested.)
The shift keys don't work in DOS, Linux, Windows, or even in the BIOS. I test it in the BIOS by using Tab to cycle through the fields in time of day, then Shift-Tab to cycle backwards. This works with a USB keyboard, and it also works on the ATi chipset models and the Intel chipset models that are still working.
Thank you for your reply. (-:

Satellite L500-13W - FN Key Stop Working

Hello Everyone
I have a problem, suddenly, without doing anything, my *FN keys stop working*. First the luminosity adjustment still worked without appearing the bar on the top of the screen, but when I reboot the computer not even that works, nothing related with the FN key works.
My biggest problem is that my computer is a Toshiba Satellite L500-13W and *i can only activate Wireless pressing FN+F8*. I can't stay with this problem much more. I already looked in this forum and in other sites but none of the solutions have solved my problem.
I hope you can help me.
Thanks in Advance.
(Sorry for my bad English) :|
Oh I forgot to say, I am using Windows Vista 32 bit

Hi
> I don't understand why so many people have this problem
I cant imagine that many people have this problem. To be honest I have two notebooks, Satellite A300 and Qosmio F50. On both notebooks I installed Windows 7 and after installing VAP and Flash Cards support utility the FN keys worked fine. Also on Vista I never had a problem, all is working fine.
Anyway, I think you have tried everything so the last chance is reinstalling Vista using Toshiba recovery disk. After this the FN keys should work again.
Check this!!!

Delete key stopped working after update

The delete key stopped working last night after updating both safari and itubnes.

No one has any ideas?

Boot keys stopped working after Leopard install

I have seen others having this problem in another thread but no answers, so thought I'd give it a go.
After reading these threads finally got Leopard to install and run okay. Many thanks all. But, along the way, my boot keys stopped working. It doesn't matter what I hold down, whether 'c' or 'cmd-opt-p-r' or 'shift' or any other key combination the machine just boots straight into Leopard.
I have tried resetting the PMU (or whatever it is these days) via the internal button in desperation but still no luck.
Anyone with any ideas?

Same problem here, so I'll pull this post up. No key works.
I always have to go to the Start Drive (or whatever it's called in english) in Preferences Panes and choose the partition I wish to start directly in OSX or Windows for booting back to OSX. This is very annoying. Alt key won't show up any possible boot disk although their both internal drives.
If someone would kindly post any ideas how to change that, would be great. I've done a fresh install, with a Time Machine recovery, but this didn't seem to help.
EDIT:
I found another subjet here from november '07:
http://discussions.apple.com/thread.jspa?threadID=1224639
it seems the new Apple Keyboard is the origin of the Problem on iMac Core Duo. Apple techs said that a new firmeware should be coming before the end of 2007 (but it's february 2008 now ?!?). Any other ideas how to get this work ? I'll write on Aplpe feedback page for sure. Maybe the other boot keys aren't working because of this keyboard too.
Message was edited by: Nordlaser

Brightness control keys stop working after booting MacOSX

I bought a new iMac 27" a couple of weeks ago, and I installed Windows 7 using bootcamp.
All the control keys (brightness, volume, etc) works ok on Windows until I reboot it in MacOSX. When i start windows again, brightness controls keys stops working, leaving the screen with the maximus bright, which is killing my eyes.
Reparing boot camp drivers doesn't do the trick. Am I missing something?

Try fn + the controls. It might be that Windows defaulted to those buttons as F1, F2, etc. Using fn while pressing the buttons will 'tell' Windows that it has to listen to the Bootcamp software and lower the brightness.

Volumeicon volume keys stop working after adjusting volume via icon

When Volumeicon is first started, the volume keys work fine, (although it doesn't show the volume bar like it does when you scroll on the icon for some reason). When I adjust the volume by scrolling the mousewheel on the icon, the volume keys stop working and volume can only be adjusted via scrollwheel. Volumeicon must be restarted to restore volume key functionality.
Why is this happening? What's going on?

Is this something that worked previously but then stopped working correctly?
What window manager / desktop environment are you using?
If you start volumeicon from the command line then use it are there any error messages?
Alternatively, does the volumeicon-gtk2 packagen in the AUR work better?

WiFi (Key) stopped working after upgrade to Windows 10

I thought I would post this on the forum for those who are having the same problem because help for this issue is few and far between compared to the number of pleas for assistance from HP owners. When I upgraded to Windows 10 on my Pavilion, the WiFi stopped working and I could not turn it on using the hot key (F12). I searched for answers and worked hours trying to solve it until I came upon the only suggestion that worked for me: I had to disable fast boot (power options, change what the buttons do, "change settings that are currently unavailable" (?!?)) , so I could get into the bios and then I went into the bios by pressing f10 during boot. Reset them to defaults. (Changed from default back to what I wanted) saved and the wifi button turned white after pressing during windows 10 boot up. EDIT: If it does not turn on right away, try turning it on through the wifi settings. I hope this can help a few, who like me, struggled endlessly for a problem that few HP mods seem to be responding to. Cheers.

Satellite S55t-A5389 (PSKK2U-028002)
Put your part number (PSKK2U-028002) in here. It will take you to a page that has 12 Windows 10-compatible downloads. Unfortunately, a WiFi driver is not one of them.
But there is this:
Your selected Toshiba PC is supported for upgrade to Windows 10, but not all of the software for the upgrade is available at this time. Additional software will be posted here when it is ready. Please check back at a later time.

Satellite U300-130 - TosBtMng has stopped working after Nokia PC Suite installation

I've got the same problem too... with Toshiba Satellite U300-130.
Bluetooth had worked pretty well before I installed Nokia PC Suite for my mobile on my PC (the newest version 7.1.26.0 from website).
To be correct, at first I even managed to maintain a Bluetooth connection between PC and Nokia and ran syncronisation of contacts. I made several attempts but each time syncronisation run ended with message "PC coudn't get answer from your Nokia".
After rebooting, my PC went crazy and started issuing message "TosBtMng has stopped working" and it restarted every time I ask it to close.
Installation of new version of BT Stack (6.40) didn't fix this error.
Please help

Hi there
I answered an existing thread with the same problem, but no-one can help apparently.
Anyway,,, I can at least help you with getting rid of the looping setup. You need to rename the directory with the Toshiba bluetooth stack.
I also have Nokia syncing and it worked fine until recently. - I have to say I think the problem relates to a Windows auto upgrade.
How to solve this is a different matter. At this moment I have given up. The Toshiba bluetooth stack disabled.

Media Key stop working after firmware update on 55...

The media key was working before the upgrade. After I upgraded the firmware, it stopped working.
My phone info:
5530
software version: v 11.0.054
customer version: 11.0.054.207.02
language set:25
Type: rm-504
latest update: 10/21/2009

"The media key was working before the upgrade. After I upgraded the firmware, it stopped working.
My phone info:
5530
software version: v 11.0.054
customer version: 11.0.054.207.02
language set:25
Type: rm-504
latest update: 10/21/2009"
Did you update using NSU? I have updated mine recently and I have v11.0.054 with custom version 11.0.054.C02.01, language set:22.. and my media key is still working. Am I missing some updates? Nokia Software Update checker says theres is no update yet.
Message Edited by RhomANZ2 on 30-Oct-2009 03:53 AM
Nokia 5530 Xpress Music
v11.0.054
"How We Respond Is Who We Are..."

Satellite P305-S8820 - FN key not working after clean install of Windows 7

Hi,
I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
Any ideas?

Hello John
You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

Satellite A205 - SD Card reader stopped working after Win 7 upgrade

Satellite A205-SP5818
I recently upgraded to Windows 7, and, among other things, the SD Card reader stopped working. I already downloaded and installed the driver offered in this site: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2190493& rpn=PSAE3U&modelFilter=&selCategory=3&selFamily=10 73768663 (it's the next-to-last driver shown) but it went from not working all together to making funny noices when I insert the SD card... and then not working.
Any ideas of other drivers that might work, or any kind of other solution?
Thanks.

Hi
Try to remove eh SD card controller from the device list.
Then reboot the unit.
After that windows will ask you for an driver.
You can download this driver:
[SD Driver, Flash Memory v2.0.0.7|http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_cardreader_ti_25844A.exe]
You should unzip this package and has to point the driver files in this folder
This should helps to get the SD card reader working again

Satellite L300D-135 - Certain keys stop working after several minutes

Similar Messages

Maybe you are looking for