Satellite L300D-13H - How to activate FN functions on Windows 7?

Hi all,
due to corporate issues, I had to install Windows 7 64bit on a Satellite L300D-13H machine.
Everything is fine except for one thing: How do I activate the FN keys for dimming the LCD or to turn down the volume? I do not find any piece of software for that.
Thanks for any idea!
Cheers
Marc

Hi again and thanks again,
Yes, I do have the value added package installed. I have been trying to uninstall it via "programs and features" tp get a "clean" notebook, but the software is stuck.
I get the installshield wizard-popup and the machine seems to load and work, but after ten seconds it's always saying "The wizard was interrupted before the installation could be completed" (well, I have a German popup, so I just translated it).
That's it. No uninstallation possible...and unhappily no FN function. It cannot be a hardware issue as the keys worked fine some days ago when Vista was installed.
However, this is quite strange. Why shouldn't it uninstall the package?
Cheers
Marc

Similar Messages

How to activate a function module programatically?

How to activate a function module programatically?

Hi,
You can try the following function module:
RS_FUNCTION_ACTIVATE
Thanks and regards,
S. Chandra Mouli.

PR05 - How to activate a Function in the Object Services Toolbox

Hi,
How do I activate a function in the Object Services Toolbox?
In transaction PR05 (Travel Expense Manager) select any trip and then click on 'Change'. This takes you to the screen for the individual trip.
On the top left of the screen is the 'Object Services Toolbox'.
If I drop down on this list then select 'Create' there are 5 options under 'Create' i.e. 'Create attachment', Create Note', 'Create External Document', 'Store Bus. Doc', and 'Enter Bar Code'.
The 'Enter Bar Code' is deactivated. I would like to know how to activate this.
Thank you.
Warren.

no idea

How to activate a function in the Object Services Toolbox of PR05

Hi,
In transaction PR05 (Travel Expense Manager) select any trip and then click on 'Change'. This takes you to the screen for the individual trip.
On the top left of the screen is the 'Object Services Toolbox'.
If I drop down on this list then select 'Create' there are 5 options under 'Create' i.e. 'Create attachment', Create Note', 'Create External Document', 'Store Bus. Doc', and 'Enter Bar Code'.
The 'Enter Bar Code' is deactivated. I would like to know how to activate this.
Thank you.
Warren.

I think you need to check for IMG transaction code OAC5 & OAC3 and also check IMG configuration setting under
Application server-->basis services > Archive Link> customizing incoming documents--> bar code scenarios
a®

Satellite L300D-13S - How can i restore with corrupt disk 2

The laptop is a Satellite L300D-13s.
I tried to restore the laptop using the restore disks, the first disk worked fine but it did not recognize the second disk. No matter what I did I could not get it to read this disk.
I then tried to us the F8 option to restore the drive but I got the message Bootmgr missing. I have tried F8 using the DVD but this does not have a restore option.
Using the boot option with logging I did manage to access the E drive and view the HDDRecovery directory but could not find anything that would allow me to run a restore.
Is there an option to do a restore this way, or can I restore another way?
Your help would be gratefully appreciated.

Hello
Recovering procedure can be done on two ways:
-Using recovery CD/DVDs or
-Starting recovery procedure from HDD
If there is problem with created discs then you must try to use option two. It works as follow:
-Start your notebook and press F8 to enter Advanced Boot Options
-There you will see option Repair my computer
-Choose this option and follow menu on the screen.
-Then you will come across System Recovery options
-The last option is Toshiba recovery procedure. Choose it and follow menu on the screen.
Please note: this will work if you didnt change partition structure, installed own OS or removed HDDRecovery folder.
At the end I must say, if nothing helps and if you are not able to install OS using any of these methods I see one solution only: you must order new recovery DVD.

How to activate sumation functions in alv tool bar..!!

hi,
how to activate the icon for summation that appears for an alv when it is in diasabled State.
all icons are working except that summation...please suggest me..!
thanks
sivaram.

Hi,
In your ALV there has to be numerical field. Check the structure.
It wiill come automatically.
Reward if useful!

Satellite A200-1N1 - How to activate AGP?

Help me, please! I speak english very bad.
My notebook: Toshiba Satellite A200-1N1, OS: Vista
My problem: when I open program, message shows up: "*WARNING* +The game may not be consistant because AGP is deactivated. Please activate AGP for consistancy+"
My question: How can I activate AGP?
I'm looking forward your answer... Thank you.

I've never heard of "activate AGP" before so as far as I'm concerned if your video drivers are working and you can watch stuff like DVDs etc then AGP is already activated.
It does sounds like the game you are trying to run isn't compatible with the onboard Intel GMA X3100 which isn't surprising considering Intel do not make powerful gaming cards.
However double check with the game's manufacturer maybe they have bug fixes or updates for your laptop.
Richard S.

Satellite Pro M70 - How to activate touchpad mouse by use of keyboard?

I somehow lost connection to the touchpad mouse. How can I activate it again by use of the keyboard (I don't have any external mouse)?
Asia ;o)

As mentioned the touchpad can be disabled and enabled using the key combination FN+F9.
Usually if the touchpad has been disabled then a touchpad icon which appears in the task bar should contains a red crossed circle.
Check this.

How to activate Business Functions in SAP.

Hi ,
I want to activate business fucntion LOG_MM_CI_2 related with MM bapi. I found that, we can activate any business function by using transaction code SFW5 . But i can not find the above business function in this transcation code.
I am using ECC 6.0 support package SAPKA70006.
Note: (Please let me know, the right forum if this is not the right forum to discuss this question).
Regards
PG

Hi,
Your requested functionality is delivered in EHP 2 & 3 . So as suggested you need to install ehp3 or EHP4 on your server.
Regards,
Vamshi.

Satellite 3000-514: How to activate Intel WLan 2200BG hardware button

Hi.
I have a Toshiba Satellite 3000-514 and an Intel Centrino Mini-PCI WLan card. (Intel???® PRO/Wireless 2200BG) Running win-XP and Ubuntu on it.
Is there a solution to sidestep the problem, that the wlan-software wants me to push a hardware-button to activate wireless lan, that my Laptop just don't have?
In a german forum someone mentioned solving the problem by using "easy button", a program I already downloaded from Toshiba.
But you can only choose .exe files to be connected to a button. Is there an .exe file to make the software think I pushed that not existion wlan-hardwarebutton?
*sigh* Help!?
Thanks in advance. Sorry for my bad english.

Hm,
sounds tricky. I have no software solution for you, but I have an alternative solution for you.
Since you are a german guy, you can check/read this:
ttp://cgi.ebay.de/54Mbit-ATHEROS-802-11g-b-G-Wi-Fi-WLAN-MINI-PCI-KARTE-RG_
W0QQitemZ250170200040QQihZ015QQcategoryZ79551QQssP ageNameZWDVWQQrdZ1QQcmdZViewItem]
Its an atheros card like I have in my Tecra 9100. So, I had many many problems with intel card since they require a full working centrino
platform to work and so most of these cards need a "hardware" switch (in your case a button) to work.
With the atheros card you dont have these problems with switch/button since they are working anytime without need of switches or buttons.
The disadvantage is that you cannot disable the card for power saving purposes.
So I hope I could help you. Would appreciate some feedback. :)
Nice weekend.
Greets

Satellite U200-122: How to use Pivot function on external Monitor?

I have a Satellite U200-122, would like to use the external monitor in pivbot function.
But I do not find where I can have the display rotate, so that it will be displayed in portrait format on the external monitor and accept resolution 1024x1280.
Any ideas?
Graphic driver: Intel Chipset 945GM express
Thanks
Isabel

Thax for the tipp, but:
That is exactly my problem: the intel graphics acceklerator DOES NOT offer any rotate functionality! I wonder why because I have read in many forums that it should have, I know it can be seen on the right part of the intel graphics accelerator window, but nothing is there.
So i wonder, if in the U200 there is possibly a different graphic driver or management sofwtare, which just does not support this? Could it be that a graphic driver does not offer pivot???
Shortcuts do not work either.
Btw: when i put the laptop on a kensington workstation, then the kensington graphic manager -display -link - is used, and then with many workarounds i do get the monitor to show pivot in necessary reolution. but i want a to use a pivot monitor also at home without dockingstation...

Satellite L10-209 - How to install display driver for Windows 7?

I've formatted my *Satellite L10-209* and installed *Windows 7*. All drivers installed well but the *VideoCard* :xD
How do I install the Display Driver (Video Card)?
Tools & Utilities CD doesn't work with Win7,,

Hi
Im wondering that you installed Windows 7 on this oldie. In my opinion Windows XP would be the better choice but ok, you can do what you want ;)
Anyway, as far as I know your notebook is equipped with an Intel graphic card so I would recommend downloading the driver form Intel directly because the Toshiba website shows only Windows XP display drivers.
http://www.intel.com
Check this!!!

Satellite P750-13F - How to enable backlit keyboard on Windows 8

Hello!
today i installed Windows 8 premium on my P750-13F, which has a backlit keyboard. In order to upgrade to Windows 8 I had to uninstall some Toshiba drivers and other programs.
Now I have Windows 8 fully functional, but I don't know how to access to the FN button functions (Screen brightness, wifi on/off, volume up/down).
Now that that FN-button is innoperative the function that I miss the most is the one for keyboard illumination, because I can still do everything else by some other ways (I mean volume up/down, screen brightness etc.) but i don't know how to illuminate the keyboard now.
I tried installing Toshiba Hardware Setup Utility, but it won't install with Windows 8. I don't really care much if the FN-button remains innoperative (although it would be nice if it wouldn't) but what I really want is to be able to change the keyboard illumination.
I will be very thankfull for any ideas.

Toshiba need time to prepare and test the Windows 8 drivers so you need to wait a while.
Update drivers "Coming soon."
http://support.toshiba-tie.co.jp/windows8/drivers_au.htm
You need the Toshiba Value Added Package for Win8 & P750, and possibly the Flashcards support utility as well.

How to Activate Enterprise edition of Windows 10

How do I activate Windows 10 Enterprise edition?

Hi,
Generally speaking, it will be activated automatically if you get internet connected after install Windows 10 Tech preview for Enterprise.
If you still fail to activate Windows 10 tech preview after performing the steps from last poster, please try following suggestions and post back any error you encountered.
Make sure the key is right for the preview version.
Key of Tech preview download
here: NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
Key of Tech preview for enterprise download
here: PBHCJ-Q2NYD-2PX34-T2TD6-233PK
As I known, once you installed the Tech Preview version with network connection, it will be automatically activated.
Regarding current information, I recommend you follow these steps to troubleshoot your issue:
Suggestion: Rebuild the Tokens.dat file when you troubleshoot Windows activation issues
Please run the commands below as admin one by on:
net stop sppsvc
cd %windir%\ServiceProfiles\LocalService\AppData\Local\Microsoft\WSLicense
ren tokens.dat tokens.bar
net start sppsvc
cscript.exe %windir%\system32\slmgr.vbs /rilc
After that, try to activate Windows again by performing the steps from last poster.
Let me know if your issue is resolved.
Kate Li
TechNet Community Support

Satellite L500/013 - How to make dual boot of Windows 7 and XP?

Hi
I just bougth my first Toshiba laptop, it comes with Windows 7 Professional pre-installed. Before I start spending hours on this, I am just wondering if this can be done:
1) I would like to use the Windows 7 Professional in 64 bit mode and then
2) Create second partition on HD to install Windows XP 32 bit on it.
Just wondering about if this is possible and what is the recommended sequence for the install is. First thing I need to do is to create recovery disk for Windows 7, so I assume I need to configure Windows 7 first?
Thanks for any help
Thomas

> First thing I need to do is to create recovery disk for Windows 7, so I assume I need to configure Windows 7 first?
Well, this is strongly recommended!!! Before you would do anything with your HDD you should create the recovery disk!!!
Im not quite sure how you could set up an dual boot using Win 7 because I didnt try this but I did it using Vista.
First of all you have to create an second partition in Vista. This could be done in Disk Management.
Then I installed Win XP on the second partition. But after the XP installation I could not start Vista because Vista boot manager was damage by Win XP.
To fix this I have used a original Vista disk (not recovery disk). I booted the Vista DVD and this has repaired the Vista boot manager. In Vista I have installed EasyBCD.
EsayBCD is a small tool which helped to add the Win XP to the Vistas boot manager.
After new reboot Vista and Win XP appeared in the boot manager and I could choose between both OS.
I think you will need the same procedure using Win 7

Satellite L300D-13H - How to activate FN functions on Windows 7?

Similar Messages

Maybe you are looking for