Satellite L300D - Error code 19 in device manager on CD/DVD drive

I have a Satellite L300D model PSLC0E and have just installed Windows 7 upgrade from Vista, all is running well apart from HL-DT-ST DVDRAM GSA-T50N ATA DEVICE and ATI. With the HL-DT-ST DVDRAM GSA-T50N ATA DEVICE there is a driver problem it says <Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)>it seems to do with NTI Backup 4, have tried updating to NTI Backup Now 4.5 but still no luck.
With ATI I have run updates and reinstalled the program, checking the system it shows that it is installed and the every thing is running but I do not seem to be able to change the display settings the largest is 1200 x 800, I seem to think that with ATI there should be more but not sure because when I start to run a game the screen size changes to 1024 x 768 and i cannot change anything. Any body got any Ideas?
Grommitt60

Hi
1)Have you also tried to remove the upper- and lowerfilters in registry? I have noticed in forum that this does solve this error code. On the Microsoft Knowledge Base you can find a workaround for this:
http://support.microsoft.com/kb/314060
2)I have also Satellite L300D and the maximum screen resolution is 1200x800. So you can set a higher screen resolution on internal monitor, this is only possible on external monitor.
And normally you can change the screen resolution in every game. Check this!!!

Similar Messages

  • HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

    After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

    Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
    Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
    Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

  • Error Code 10 (Device manager) NI-CAN driver 2.5.2

    Hi,
    I am using the PCMCIA-CAN/2 series 2 card to communicate with an Aerovironment ABC150 charger and get the Error Code 10 in the device manager when I tried to install the driver. 
    Windows XP
    Dell Latitude D520
    Driver version 2.5.2
    Previously the system had worked fine until we installed a USB 3G GSM modem. The Max software no longer recognised the CAN card. Since, I have installed the 2.5.2 version of the software and reinstalled XP on the machine. I have checked for IRQ conflicts and eventually removed the USB GSM software and hardware. After reinstalling XP, I tried to install the driver without installing the USB modem. I have downloaded the patch as for 2.3 versions and before.
    When installing the driver from the 'Found new hardware wizard' I was not able to point at the system32/drivers location for the nicanpkw.sys file as it reported that there was no compatible software, nor by looking at any of the other locations. Instead I had to manually select it form the list of available drivers.
    It is possible the Dell has been damaged as the original PCMCIA GSM card stopped working after the machine was knocked. I have tried other PCMCIA GSM cards and they work fine. I have also tried to use the PCMCIA-CAN2 (s2) card in another machine and that works also.
    Thanks in advance,
    Cam
    nicanErr.txt
    [OSINFO_SECTION]
    OS=Microsoft Windows XP Workstation 
    Service_Pack=Service Pack 1 (Build 2600)
    [DRIVER_VERSION_SECTION]
    NICAN.DLL_VERSION=2.5.0f6
    NICANFRM.DLL_VERSION=2.5.0f6
    DRIVERS\NICANPK.DLL_VERSION=2.5.1f0
    NICANPU.DLL_VERSION=2.5.0f6
    NICANTSK.DLL_VERSION=2.5.0f6
    NICANCFQ.DLL_VERSION=2.5.0f0
    NCVI.DLL_VERSION=2.5.1.12289
    NICAN_S1.NFW_VERSION=2050100
    NICAN_S2.NFW_VERSION=2050100
    [CURRENT_SECTION]
    Section_Index=0
    [INDEX_0]
    Local_Time=
    Err_Status=
    Function=

    Hi,
    I have seen such wiered things when i had the legacy USB support enabled on a DELL notebook. Try to find this property in your BIOS and disable it and besides check wether or not your BIOS has a configuration property for PCMCIA/cardbus and try to enable pcmcia support (16 bit). Thats because the CAN board needs his own IRQ and cannot share interrupts like other cardbus compatible devices can.
    Let us know if that helps.
    DirkW

  • Satellite A40 - Error code 10- D: drive cannot be found

    HELP PLEASE!!!
    I really need some help to fix the errors on my system.
    A short while ago i accidently deleted the DVD+/- optic drive to my laptop, and when I go to my computer it isnt there?
    The sys. tells me that the D: drive cannot be found, and the drive was removed without preperation and cannot be found, Error code 10.
    What does this mean, as I have tried to update the BIOS, and it does not need it, and i cannot find a driver for the Satellite A40 from Toshiba.
    Also the drivers appear to be ok and the boxes are ticked in the device management, altho the optic drive sometimes has a yellow exclamation mark?
    Tried the recovery disk and no luck.
    Also the drive doesn't work now, as it doesnt read disks!
    Here is the spec. for the computer, and the summary for the error messages. Wouild reallr appreciate any help on this please . . . .
    My Computer Information - General
    Please wait while information is being collected...
    100% (collecting Local Disk information)
    Refresh screen
    Specifications
    TOSHIBA
    System Model: Satellite A40
    BIOS Version: TOSHIBA Version 1.50
    Operating System
    Microsoft Windows XP Home Edition
    Version: 5.1.2600
    Service Pack: 1.0
    Location: C:\WINDOWS
    PID: 55277-OEM-0011903-00111
    Hot Fix: Q817606
    Memory (RAM)
    Capacity: 2 GB
    Here is a listing of the Dr watson error reports that appeared don the system.
    25 January 2009 Service Control Manager The Application Management service terminated with the following error: The specified module could not be found.
    25 January 2009 atapi The device, \Device\Ide\IdePort1, did not respond within the timeout period.
    25 January 2009 Cdrom The driver detected a controller error on .
    25 January 2009 atapi The device, \Device\Ide\IdePort1, did not respond within the timeout period.
    25 January 2009 Service Control Manager The following boot-start or system-start driver(s) failed to load: Cdrom
    25 January 2009 PlugPlayMa nager The device 'T S I A D D-R M S - 6!1"' (IDE\CdRomT_S_I_A_D_D-R_M_S_-_ 6!1"________________1#3"____\3 423362730283321372620202020202 020202020) disappeared from the system without first being prepared for removal.
    31 January 2009 Cdrom The driver detected a controller error on .
    31 January 2009 Service Control Manager The following boot-start or system-start driver(s) failed to load: Cdrom
    24 January 2009 Applicatio n Error Faulting application helpctr.exe, version 5.1.2600.1106, faulting module kernel32.dll, version 5.1.2600.1106, fault address 0x0001a67a.
    25 January 2009 MsiInstall er Product: ParetoLogic DriverCure -- Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action DeleteScheduledTask, location: C:\Program Files\ParetoLogic\DriverCure\D riverCure.exe, command: -deletetask
    25 January 2009 Applicatio n Hang Hanging application switch.exe, version 0.0.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

    Run Regedit, and remove the Upperfilters and Lowerfilters values from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class{4D36E965-E325-11CE-BFC1-08002BE10318}
    Then Reboot. If your CD/DVD burning software fails to work, reinstall that software.

  • Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service. 

    Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service.  I would prefer to talk to someone directly.

    Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
    Regards,
    Ashutosh

  • Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

    Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
    I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
    What can I do now that I installed the flames of **** onto my computer?

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    resetp
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Error Code: U44M1P7 (Extension Manager  6.0.8 update)

    Error Code: U44M1P7 (Extension Manager  6.0.8 update)
    I'm getting above error.., Please advise

    Photoshop: Basic Troubleshooting steps to fix most issues
    Troubleshoot Update Errors
    Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
    Explanations of error codes:
    U = Updater.
    44 = Install Update Error
    M1 = Automatic
    M2 = Standalone mode
    P = Patcher
    6 = Done With Errors
    7 = Installation Failed
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Error code 28773 was returned by the Audio driver.

    After the Mountain Lion update on my mac, whenever I launch the GarageBand'09, I experience this Error Message : Error code 28773 was returned by the Audio driver.
    It only has Continue as an option, so, I click on this "Continue" option, click on "Loop" option, click on any sound, for example Bass then click anything under the Bass option, this same error message pops up.
    Please, someone help me out.
    This is my email : [email protected] if you want to reach me via email.

    Do you have any device drivers installed, for example Digi Design Audio Interface?
    Make sure you have the latest versions of all audio drivers; you need sandboxed, 64-bit versions to run with Mountain Lion. Look at the web site of the manufacturer of your interface if there are newer drivers.
    Regards
    Léonie

  • Error Code 25974 was returned by the Audio Driver - Logic/MBOX

    Hi,
    I know this question has been asked before but could not find a resolution to this problem.
    I'm using a MacBook Pro (15-inch, Mid 2012) with a 2.3 GHz Intel Core i7 processor, using OS X Mountain Lion (10.8.2) and running Logic Pro 9.
    I've been using the AVID MBOX interface for some time now and it hasn't failed me yet, but today I received the error message 'Error Code 25974 was returned by the Audio Driver' when selecting it as the input/output device.
    I'm not sure why this is now happening as the interface drivers are up to date and as I said, it was working earlier in the week when I last used it.
    Any help would be greatly appreciated.

    Bump,
    This is only happening with one particular project ... I imagine it could have become corrupted somehow, yet I can still work on the project and edit it. I just can't bounce it! Any ideas as to what I can do?

  • Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

  • Has anyone ever dealt with this error code...during buring to DVD 2130932483??? I need help

    Has anyone ever dealt with this error code...during buring to DVD 2130932483??? I need help

    Encore burns to DVD, not Premiere Pro... moving to Encore forum
    These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • Error Code -39 was returned by core audio driver

    Error Code -39 was returned by core audio driver.
    Does anyone know what that message means?
    Thanks.

    When did you see it?
    (It's an EOF error)

  • ERROR CODE -1 was returned by the CoreAudio driver? help!!

    Just been using my Mac and noticed that i get this crash :
    "ERROR CODE -1 was returned by the CoreAudio driver"
    The it says "The application logic Pro quit unexpectedly" ?
    Am running Logic pro 7.1.1 on a 2Gb G5 2.3 Dual Core Mac with a MOTU 828mk2 - is this crash to do with the MOTU?
    Secondly is anyone else using Kontakt 2.02 with Logic on a Mac? It seems a bit unstable and it doesnt trigger loops on the 1st beat of the bar of a sequence? Any ideas??
    Apple G5   Mac OS X (10.4.5)   2Gb Ram, Logic 7.1.1, PTLE 7.0, 20" Cinema Display,

    it could be the Motu driver if you have not updated it since upgrading to Tiger. here is a link
    http://lasso.motu.com/downloads/filelist.lasso?&-Database=downloads&-Table=dldb&-Op=cn&product=firewireaudio&-Op=cn&platform=macx&-sortfield=date&-sortorder=descending&-search

  • Error code 1 was returned by the audio driver :(  randomly!

    hey all! ive been getting this messege "error code 1 was returned by the audio driver" almost every time i try and merge tracks, bounce track in place, bounce region in place, or mixdown stereo regions per tracks. NOT when i do a real song bounce though. i feel like im noticing my computer is taking a long time to copy audio files into logic projects...i dont know if they are related though. but this error code 1 thing has been hapening CONSTANTLY. the thing is...nothing has changed. i havnt installed or changed anything on my system. its happening on ALL of my old projects, and MOST of my new ones. ive tried disabling all third party AUs and it still happens. do i have bad ram? a bad drive? do i need to reinstall everything? thanks so much in advance!

    Ok, I don't know if this solves your problem... but as for what was triggering the 'Error code 1' message on my computer... Here's the update.
    After much troubleshooting, the cause of this error in my setup was the Highpoint RocketRaid 2314 eSata PCIe card.
    The Highpoint RocketRaid driver is included in OS X 10.8 with no additional drivers / installers to run. However, it isn't compatible with the old driver when upgrading the kernel (ie. 10.6 - 10.8)
    I was bouncing to an external drive connected through eSata to the RocketRaid PCIe card... error message. Time Machine backup connected through eSata... error message. The drives were being dismounted rudely, or losing connection momentarily and reconnecting, resulting in the error messages.
    Here are the instructions from Highpoint tech support to manually uninstall the embedded driver, and then reinstall the old Snow Leopard driver for use in Mountain Lion (10.8)... which works as it's suppposed to.
    1.  Go the folder System > Library > Extensions >, look for the file HighPointRR.kext and delete that file.
    2.  Second, download the driver from the link below, then run the Un-install script to remove any previous installed driver.
    http://www.hptmac.com/productfiles/bios_driver/hptrr-mac106-driver-v11...
    Then re-install the driver, but do not reboot or restart the system.
    3.  Third, download the webGUI from the link below. And run the un-install script to remove any previous installed web GUI.
    http://www.hptmac.com/productfiles/WebGUI-Mac-v168-091120.dmg
    Then re-install the web GUI and reboot after installation is complete.
    Once the system has booted up, open a browser and type URL to log into web GUI.
    http://localhost:7402
    User Name: RAID
    Password: hpt
    I hope that this helps someone!

  • Error Code 1 was returned by the Audio driver

    Whenever I try to export a podcast to MP3 - using good quality, I get multiple errors. A little box pops up saying "Error Code 1 was returned by the Audio driver".
    In the saved file there is a short one second pause wherever that particular error has shown up.
    Has anyone experienced this error and knows of a solution? I am utterly clueless, not very experienced with Garageband at all...
    Thank you in advance!

    I'm getting this too, for the first time. I've got a project that I've used to publish a monthly podcast with and I've been opening, editing, and saving this project for a couple of years now.
    Now, with GB '09, I'm getting this error. Not pleased.

Maybe you are looking for