Satellite L305D-S5881: Touchpad and FN keys do not work after Win 7 installation

I have recently installed windows 7 and all of a sudden yesterday my touchpad did not work.
I was not able to move my mouse arrow at all.
I had to purchase a wireless mouse so I could use my laptop.
When I press the fn key plus f9 nothing happens to see if it is enabled or disabled.
I have a satellite l305d-s5881
thanks for your help

Hi mate
The Satellite L305D-S5881 belongs to the Toshiba US series and has been released for US market.
You will need to visit the Toshiba US driver page in order to get all drivers.
To get the touchpad working, you will need to install the Touchpad driver.
Furthermore the FN buttons are controlled by VAP (value added package) and Flash Card Support Utility.
You need to install both; firstly VAP and then Flash Cards.
Here is the Toshiba US page:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
Greets

Similar Messages

  • HT4818 my zero and nine key are not working

    my zero and nine key are not working and also //////// symbol sometimes keeps repeating

    Try an external keyboard. If it works, you need a new internal keyboard.

  • "backspace", "g" and "h" keys are not working.

    hello,
    my laptop is HP 450 and windows 7.it is one years old. i haven't spilled anyting on it or damaed it in anyway i can think of.
    suddenly the "backspace" , "g" and " h " keys are not working. 
    please help me, because i have to complete my university assignment as soon as possible.
    tank you,
    shehara

    Hi,
    While this could be a hardware issue, it's always worth trying the following.
    Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
    Shutdown the notebook.
    Then unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have a MacBook pro and when I turned it on the number 9, o,l and .  Keys do not work.  Any help?

    I have a MacBook pro and when I turned it on I cannot get the 9, o l and . Keys do not work.   Any help?

    Probably mouse keys
    System Preferences > Universal Access > Mouse and trackpad > Mouse Keys: Off
    Chris

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Myi iphone4  microphone not working and the home button not work after IOS6 updat

    Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
    Make sure all your data is available on your computer for manual syncing later.
    Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
    And you are using iTunes 10.7?
    I'm just trying to help get you going.

  • Satellite L350 - touchpad FN and F9 key is not working

    hello,
    I have a toshiba laptop Satellite L350 with Vista 32 bit, and my problem is NOT working FN keys.
    I've installed allready Synoptics Touch Pad V6.3 from Toshiba website, but it didnt help.
    I've searched for other mentioned software posted on this forum, but i couldnt find.
    The biggest problem ist that my touchpad is blocked, and not-working FN+F9 made
    Me use just keyboard - which is difficult and annoying :(
    I would be really greatefull if somebody can help me :(
    hugs,
    Kate

    Dear great people THANK YOU VERY MUCH - THANK YOU 1000 TIMES !!!!! :)
    My touchpad is working again :D, am really really happy about this, and really grateful !!!
    You are so great and intelligent, I wish I had knowledge like this, because with computers am totally lost.
    Of course all your instruction helped, and everything is working properly !! :)
    Thank you one more time... you are really great !
    Hugs,
    Kate
    ps. I will not block my touchpad again - just in case ;P

  • Satellite L305D-S5881 scratches and hazing on surface.

    Hi,
    the model of my lap top is an Satellite L305D-S5881. I had accidentally scratched the surface of the area near the keyboard of my lap top and it is very visible. So i did some research on how to remove the scratch. One website said to use tooth paste on the scratch to remove it, so i did. Unfortunately, it got even worse. Now, the one scratch is surrounded with lots of mini scratches which i think you call hazing and it looks horrible. My question is,
    "Is it possible to buy a new lap top case not a protective case or a bag what i mean is the part that covers and protects the harddrive, etc.."
    and if not possible, "Does anyone know how to remove hazing or scratches off the computer surface NOT the screen? Is it possible to use a car buff to remove the hazing or scratches? How about an All purpose scratch remover?"
    Thanks!

    > "Is it possible to buy a new laptop case not a protective case or a bag what i mean is the part that covers and protects the harddrive, etc."
    Do you mean the upper and lower notebook plastic covers?
    I think you can purchase such parts only from the authorized service provider in your country! The parts must be ordered from the Toshiba
    > Does anyone know how to remove hazing or scratches off the computer surface NOT the screen?
    I doubt this is possible because I think that the scratches are on the plastic cover and you cannot repolish the plastic surface.
    Maybe it would be possible to furbish and to revarnish the full surface but this would mean that you would have to disassemble the whole notebook and this would cancel your warranty.
    I think the best solution is to contact the ASP technician who could replace the scratched plastic cover.

  • Satellite U500-1F5: eco and FN buttons don't work after BIOS update

    Hi everyone,
    I hope i can find a solution for my problems in here.
    I bought a new Toshiba Satellite U500 (PSU9ME),
    I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.
    Last week I received an alert to updat the BIOS and i did it. since then i noticed the following problems:
    1. eco utility is not working, and when i tried to uninstall it it says (BIOS unsupported)
    2. the on screen funtion buttons that appear on the top of the screen when you press the Fn button does not apear anymore
    3. the touchpad lock and unlock button does not work and even pressing Fn+F9 doesnot lock it
    I hope u can give me an answer regarding my problems,
    I already downloaded the latest updates for the eco and value added packege from toshiba site and installed them,
    BUT
    didnt solve any of my prob
    still eco utility is not working. The msg (unsupported BIOS), appear when i run the update.
    The function buttons bar on the top of the screen not working ( even after i uninstall the toshiba value package and re-install the latest one) and the touch back lock/unlock button also is not working.
    I hope Toshiba can find me a solution, coz I dont have the time to go the service center
    Model U500-1F5 PSU9ME00D00XAR
    Windows 7 (64)
    Thanx in advance

    Hello
    At first just one comment:
    *I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.*
    Thats nice but definitely not necessary. When the system runs well, don't touch or change anything. Maybe sounds stupid now but I recommend you to remove TEMPRO from the system. Believe me you don't need it. I have 2 years old Satellite A300 and still original BIOS. It runs perfectly and I don't want to make risk and change anything. Since last month I have Satellite U500-1EX and will do the same. Tempro is already removed and I am happy with factory settings.
    All you have done is OK but at least you can try to reinstall whole OS now using HDD recovery option (F8 at start-up) to see if everything will works well again. sorry but if this will not help I think you need BIOS downgrade to old version.

  • Satellite P20: Fn+F5 and TV-button does not work

    Satellite P20, Windows XP SP2 keyboard problem.
    When I press Fn + F5, the computer does not show as earlier the different display options. TV button does not work also. I can change the different displays with my nVidia Display Driver.
    My keyboard is OK, there is no dust or fluids. I have newest BIOS update and Windows XP Service Pack 2. What program controls the keyboard functions in this case?
    How to repair this problem?

    Hello
    Obviously you have removed something or preinstalled your own operating system. Without Toshiba designed tools and utilities it will not work. I dont know exactly which of them are for doing this but please try to install Dritek Easy Button Util. /Sticky Keys V1.008, E-Keys Utilities and Toshiba Hotkey Utility.
    I hope it will help. If not please write again.

  • The caps lock and p key does not work

    All of a sudden my "p" key and "caps Lock" key are not working. tried pram and smc resets but does not help. Want to know if it is a hard ware or a software issue. Im using a a MAC Book Pro that i bought ony 15 days back

    First assumption: its faulty wiring, judging by this being your first post, im guessing its a new mac? Id call apple or replace it at the store you got it from if you didnt buy through online or applestore.

  • The numeric digits, space, and enter keys do not work on my iphone and resetting it is not helping... any other options

    I noticed that the following keys do not work on my iphone (space, language, numeric keys, enter/go buttons) what should I do, tried resetting it multiple times, but it didnt work.

    Restore from backup
    Restore as new
    http://support.apple.com/kb/HT1414

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • IPad 2 front and back camera is not work after update iOS 7.0.4 it gives like the resolution is not adjusted

    After updating my ipad 2 to iOS 7.0.4 , front and back camera is not working it gives like very small dots or dash. I did restore from iTunes and reset by holding on the home and sleep button, I also tried to close the app from the task bar but still all trials didn't solve the problem.

    I haven't heard of this before so I doubt it's a bug. Probably something happened during the 7.04 download.
    Backup your iPhone to iTunes and restore it as a new iphone, then restore from the backup. This will give you a fresh copy of iOS 7.04.

Maybe you are looking for