Satellite L305D-S5895 - Functions keys and WLan don't work with Win XP

Hi,
first sorry for my english
I bought a Toshiba Satellite l305d s5895, with winXP, because I need software, but the function keys doesn't works.
So I need a driver, but i can't find it, and the internet wireless doesn't work.

>Where would one find this special XP BIOS?
In my opinion there is problem because most threads here are about European notebook models. so then come question from US. Toshiba Europe and Toshiba US don't work together and every of them is responsible for own models and offer support for country specific notebook models.
So here in Europe Toshiba has for most models offered two BIOSes. One was already on the Vista delivered notebooks. On download page Toshiba has offered BIOS for WXP. in most cases it was version 5.xx and this BIOS was designed to support Toshiba specific tools and utilities. For example, full FN keys functionality was available with this WXP BIOS only.
So if someone of you have US notebook model they should see how to find the solution with Toshiba US or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1
Bye and good luck!

Similar Messages

TS3474 I purchaed the earpods with mic & controls and they don't work with 6th generation nano. Are the features supposed to be compatible with this model of nano?

I purchased the earpods with mic & controls and the features don't work with 6th generation nano--is this normal?

Hi there,
According to the product page:
The remote and mic are supported by all models of iPod, iPhone, and iPad (not all models support volume up/down functions). Audio is supported by all iPod models.
Your iPod Nano may be one of the models that does not support the volume up/down function. Take a look at the page below for more information.
Apple EarPods with Remote and Mic
http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
-Griff

BT and WLan don't work after new WIn 7 installatio on Satellite C850 PSKCAV

Hello
I have Satellite C850 - short model PSKCAV. I have installed Windows 7 32bit correctly but the BT is not installed correctly, I have tried many options but i couldn't. activate the WIFI neither the BT.
What can I do?
Thank u.

If you want to have well working BT and WLAN you must install right drivers and some additional Toshiba specific tools and utilities.
I dont know where you have bought this notebook (country) but visit please Toshiba support page for your country and install all offered stuff for Win7, especially BT filter, WLAN card and Toshiba Value added package.
If you want to have more help from us post exact model and country of purchase.

Satellite A300-243 - Easy Keys & Recovery Disc don't work

Hi, I just bought a new Toshiba Satellite A300 243 and I decided to reinstall system to Vista Ultimate 64 bit (because of the 4GB ram usage).
It took me a few hours, but in the end I found all needed drivers and everything is working fine, except one thing - those multimedia keys (I think they're called Easy Keys). Start, Stop, Next track and Preview track works fine, but the first (by default used for toggling illumination) and the second (by default used for starting W Media Player) just don't work. I have installed the latest version of VAP for 64 bit Vista and in Toshiba Button Support I'm not able to change anything. The list, where normally I'm able to choose a key to edit its function, is empty. I found a few similar problems on this forum, but without any useful answer - lookes like the only way is to use the Toshiba Recovery option, and at this point I'm getting to my second problem.
The second problem is in Toshiba Recovery Disc Creator and Toshiba HDD Recovery tool. At first, before I reinstalled Vista to 64 bit version I wanted to create Recovery Disc, but Toshiba Recovery Disc Creator just didn't started. Then I found the HDD Recovery option, and I read, that this tool is placed on a hidden partition, so I thought I will be able to recover the old system with this tool in case of any compication. So I reinstalled the system and wanted to go back to 32 bit, because it looked like its slower and at first I wasn't able to find all necessary drivers. And what a surprise - Recovery tool disappeared!
Now the only thing I'm missing on 64 bit version is those two multimedia keys.
And the last question - is there any chance to get a Recovery Disc with Vista 64 bit?

Hello
As you said for the easy keys or also called illumination buttons you need the Toshiba Value Added Package. The Satellite A300-243 belongs to the PSAG8E series and therefore you can find all drivers and tools on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Before you install the VAP, make sure that all drivers are installed and SP1 for Vista at least. Then you can install it and normally then you can use the FN keys, illumination buttons, etc.
Make also sure that you have installed the newest BIOS for your notebook.
About your problem with the recovery disk creator and HDD recovery option I can only say that these features are only available on the preinstalled Vista version. That means if you upgrade to Vista 64bit you cant use the HDD recovery option anymore and also the recovery disk creator.
So if the recovery disk creator doesnt work you should use the HDD recovery option but this is not stored on a hidden partition. These files are stored on the second partition of HDD in the folder HDDrecovery. The hidden partition that you mean belongs is a Vista feature: http://en.wikipedia.org/wiki/Windows_Recovery_Environment
But just one question: Did you already create a recovery disk?
Greets

Satellite A300-20P: FN keys don't work with Win 7

FN keys don`t work on win7 satellite A300 20P

Hi
I had the same problem on my Satellite A300 after Windows 7 installation. So I downloaded and installed Toshiba Value Added Package. It was pretty easy, just few clicks and one restart. What happened after restart? Yes, the FN keys works!!! :)
Here you can get it:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Satellite A300-1GN - Media buttons don't work with Win 7

Hei
I installed windows 7 to my Toshiba satellite a300 1gn, Short Model No: psagce and some illuminated media buttons don't work.
i have the latest drivest but still nothing. first button is should controll the illumination for media buttons, touch pad and Satellite logo.
second button should open media player or something like that. the other fore buttons work fine!
Could someone helt me solve my problem?

Hi
You have to configure the single buttons.
This Toshiba button support pop up will appear if the pressed button was not configured.
So press the button and then assign the action, application.
You have to expand this menu pressing on the small arrow on the right.
Greets

N86 media buttons and volume don't work with music

I used my N86 on a trip last week as my music player, and used the nokia remote attachment which I used to play/pause, skip, repeat and adjust volume with no problems. Just today I used my phone again, this time without the remote, or headphones, and now the media buttons on the end of the phone (when slid oposite the keypad) don't work, and the sound volume won't adjust with the volume key. I even tried with the remote and that didn't work either. The volume works fine with phone calls. Any ideas on what caused this?
PS I just updated to 20.115 and this did not correct the problem.
Bruce
Message Edited by Erhard on 18-Nov-2009 02:43 PM
Solved!
Go to Solution.

Sigh.. sorry to hear that. What is it with these phones that you have to format them all the time? (a rhetoric question, knowledgeable presons needn't answer )
(Trivia: search results for 'hard reset': 6738, search results for 'format': 16063, search results for 'factory reset': 4329)
You'll probably soon have that same problem again - my all means I don't hope you will, but I'm just guessing
kvirtanen.deviantart.com

Next and Previous don't work with video in Playlists

In iTunes for Windows 10.1.2.17, when playing video from a playlist, the video will end and the video window will close, and playback stops. No new video will play. The same thing occurs when clicking on the Next or Previous buttons (both on the video window and in the playback controls at the top of iTunes. Shouldn't the next video in the playlist (or the next random video) play once the first has completed?
This is a new behavior. It did not occur with earlier versions of iTunes.
The Next and Previous buttons work as they are supposed to when playing video from the library, but then there is no way to select specific videos or to randomize playback as is possible under a playlist (which is the whole point of the playlist.)
The Next and Previous buttons still work as they are supposed to when playing music from a playlist. This new odd behavior occurs only with video playback.
Is this a known issue, or is there something I'm missing in the operation of iTunes? Are other people experiencing this behavior?
Message was edited by: BTarver

This happened to me as well with Windows 7 32 bit (which I did as as upgrade from Vista Home Premium - if that might foul things up a bit) and affects Firefox 34.1 and IE. I did a system restore which took me back to Firefox 33 and Flash was fine. Later in the day Firefox updated back to 34.1 and I lost Flash again.

IPhoto, iDVD, and iMovie don't work with Leopard

Hi, I just installed Leopard onto my machine and iPhoto, iDVD and iMovie no longer work properly. For all three I get the error message "(This program) has unexpectedly quit." Can you help?

my husband was having the same problem and it even bled into his sys prefs. the problems actually started after he ran software update last night (things were working find before that, and he's running leopard btw)
he archived and reinstalled (he unchecked the "preserve users and settings box") and we're about to find out if that solved it.
to summarize, you may need to reinstall if software update doesn't fix it. not sure what caused this problem. perhaps some corruption of files?

ITunes asking for reinstall and still won't work with win 7?

Just installed Windows 7 Ultimate on new unwritten hard drive, when I try and open iTunes I get the message that some registry files are not available, the ones that itunes uses for CD burning/playing, please reinstall iTunes. I have done this over and over and it makes no difference. iTunes will open but I cannot play anything and the speakers are working fine. I spent a couple hours with HP chat last night because my CD/DVD writer had error issues, and the gentleman from HP helped me to edit the upper and lower filters so that my CD player would be recognized by windows 7 and work, now iTunes won't work. I'm completely baffled because I have the same Windows 7 OS on another computer and iTunes works fine with that one. Any help would be appreciated. Thank you, Cindy

Hooray hooray hooray! So many times we never hear back what happens and it just makes my day to know when something works!
I will investigate why hp doesn't make this solution easier to find. Thanks again for your response!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

Hello World and FSBL don't work with ZC702

Hi everyone,
I'm very confused about my issue. I've a ZC702 Board and use SDK 2014.4 and Vivado 2014.4 (both 64 bit) on a Windows 7 machine.
I've created a simple design with Vivado. The only element I have is a Zynq processor. I turned on some controller ( like I2C, QSPI, CAN, SD) and, configured the CAN CLK prescaler (see Zynq-7000 AP SoC Technical Reference Manual v1.10, page 581) and that's it.
After I exported the bitstream and launched the SDK, I created a FSBL project and a Hello World project. Nothing spectacular, nothing weird. Everything I used came out of the box.
I used the Xilinx tools to create a boot image and flashed the memory.
The boot sequence works fine till it has to execute the HelloWorld.elf. I get following message :
Application
Handoff Address: 0x00000000
In FsblHookBeforeHandoff function
No Execution Address JTAG handoff
Here is the thing: If I use the ZC702 pre-defined hard platform, with I can choose in the creation process of a new project, everything works fine. But that's not, what I want and that's not, what I need.
Why does this happen and how can I understand and reconstruct this behavior to configure and fix this kind of problems
in future by myself?
I'm looking forward to your suggestions
P.S: I've done a lot of googling but I couldn't find anything suitable.

Check this AR and attached design
http://www.xilinx.com/support/answers/50869.html

A/V and Conferencing don't work with federated partners

Hi Guys.
I hope someone can assist us.
We have Lync Server 2013 installed and have a unusual error.
This is what they have:
Internet -> Firewall -> TMG 2010 -> Lync Edge -> Front End
The Edge Server & Front End server is Windows 2012 Standard Edition.
So we are planning on moving the Edge server to the DMZ soon.
As for Lync functionality this is currently working (Note that the client did not opt for Enterprise voice.)
IM: An AD authenticated user on Lync client ßinternal network à An AD authenticated user on Lync client [works 100%]
IM: An AD authenticated user on Lync client ßexternal network à An AD authenticated user on Lync client [works 100%]
IM: An AD authenticated user on Lync client ßexternal network à A Federated partner user on Lync client [works 100%]
A/V: An AD authenticated user on Lync client ßinternal network à An AD authenticated user on Lync client [works 100%]
A/V: An AD authenticated user on Lync client ßexternal network à An AD authenticated user on Lync client [works 100%]
A/V: An AD authenticated user on Lync client ßexternal network à A Federated partner user on Lync client [does not work at all]
Desktop & Application Sharing: An AD authenticated user on Lync client ß internal network à An AD authenticated user on Lync client [works 100%]
Desktop & Application Sharing: An AD authenticated user on Lync client ß external network à An AD authenticated user on Lync client [works 100%]
Desktop & Application Sharing: An AD authenticated user on Lync client ß external network à A Federated partner user on Lync client [does not work at all]
What could cause this?
Both users AD and Federated user do have permission on their own Lync policies to use these functions.
The error that we get from the federated partner logs is as follows.
ms-client-diagnostics 26 reason a federated call failed to establish due to a media connectivity failure where one endpoint is internal and the other is remote.
Any Ideas???
If you think your to small to make a differnce, try going to bed with a mosquito in the room...

Hi Gerrit Deike,
Based on my experience, you should check your TMG and Firewall settings and verify the required ports are opened, the required access rules are configured correctly.
Also please check the ports of Edge Server that you defined in the topology.
The required port and protocol for your reference.
http://technet.microsoft.com/en-us/library/gg425891.aspx
Best regards,
Eric

IWork and iCloud don't work with network account

I am trying to access files that I have saved on my icloud account but when I login with my network account, iWork apps just error when I choose iCloud and it shows me my document folder. If I login to a local account it works correctly. I go to open a document in an iWork document and choose iCloud it correctly shows the documents that I have in iCloud. Is this a server issue or is there something that I am doing wrong. I do have webdav running. could that be confusing it?
David

HI,
Try repairing disk permissions...
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Satellite Pro 2100: Quick fix don't work with Win XP SP2

the quickfix drivers for win xp on my toshiba satellite pro 2100 doesnt work saying the drivers needs xp without service pack2.
Are there any drivers for winxp service pack 2?

Hi
The quickfixes (QFE's) are small Microsoft applications which close some security openings in the Microsoft products.
You can install such updates either automatically if the windows will search for updates or you can do it manually from the Microsoft site.
I think you have tried to install not QFE's but drivers which are not compatible with SP2.
Please take a look into the Microsoft Windows XP SP2 Update information which is available on the Tosh page and follow the guide lines

Rented movies and films don't work with iTunes (no response error)

Hi,
recently, I've rented a movie via iTunes but every time I try to watch it there's no response from iTunes anymore and I have to close the application. I've tried updating, re-installing iTunes and QuickTime Player but still no response. Videocard and Directx are also up to date. Same problem occurs while trying to watch trailers in iTunes Store. Anybody any solution or idea? I have a Windows Vista PC by the way

I discovered the answer to my own problem and anyone else out there who needs it here it is: If you have itunes installed on your computer and cd/dvd device is not working do a system restore to a time prior to the dl of itunes. Check to make sure your cd/dvd works again. If it does, then all you need to do is make sure your ipod is NOT connected to your computer while you download itunes again. Should fix the problem.

Satellite L305D-S5895 - Functions keys and WLan don't work with Win XP

Similar Messages

Maybe you are looking for