Satellite L350-171 - Installing network printer

I am having problems installing my Canon Pixma IP4300 printer as a network printer. The printer is connected to a desktop PC and then a Dynamode R-ADSL-C4-2 router. This is connected to the laptop by a cable, which was previously connected to my old laptop.
How do I install the network printer on the Toshiba. I have gone into Ctrl Panel and then Printers. I found the install printer option and selected install network printer. It then asks me to find the printer or else print it in manually. I did try to install it from the Canon disk, but things stuck during the process. Do I need the disk atall? How do I find what to call the printer?
Any help much appreciated.

Dear Trenny
Is this question posted on the right forum? Please don't be mad on me but what has Toshiba to do with network printers.
Do you have some problems with your Satellite notebook?
Do all ports work properly?
Is operating system working well?
For network printer configuration you can find enough pages here.

Similar Messages

Problem on installing network printer Officejet Pro x451dw

Problem on installing network printer Officejet Pro x451dw
Hello everyone. I'm trying to install the above printer on my PC belonging to a network of about 7 pc. I should say that on the PC in question is running Windows XP Professional SP3 and that the printer has already been installed on other computers in the network and is functioning. I tried using both the driver CD that can be found on the HP website and they both do not give errors during instalation, indeed, perfectly detect the printer and its IP address, so the installation finishes successfully, but the press the test page, the waiting time extends until the error message "unable to print the document." I also made an attempt with the software "hp scan doctor" and also this does not detect errors up to the test of the final print, that does not go through. At this point the software calls to make a print "internal" that this time occurs. The suggestion is to uninstall and then reinstall the HP software, but this intervention does not have a positive outcome. How else could I do attempt ??? I ask for help! Thank you for your attention. regards Roberto
Problema su installazione di rete stampante Officejet Pro x451dw
Salve a tutti. Sto cercando di installare la suddetta stampante sul mio PC appartenente ad una rete di circa 7 pc. Devo premettere che sul pc in questione è installato Windows Xp Professional SP3 e che la stampante è stata già installata sugli altri computer della rete ed è funzionante. Ho provato ad utilizzare sia il driver del CD che quello reperibile sul sito HP ed entrambi non danno errori in fase di instalazione, anzi, rilevano perfettamente la stampante ed il suo indirizzo IP, così l'installazione si conclude con esito positivo, ma alla stampa della pagina di prova il tempo di attesa si protrae fino al messaggio di errore " impossibile stampare documento ". Ho anche fatto un tentativo con il software "hp scan doctor" ed anche quest'ultimo non rileva errori fino alla prova di stampa finale, che non va a buon fine. A questo punto il software invita a effettuare una stampa " interna" che questa volta avviene. Il suggerimento è quello di disinstallare il software hp per poi reinstallare, ma anche questo intervento non ha esiti positivi. quale altro tentativo potrei fare ??? Chiedo aiuto ! Grazie per l'attenzione. Saluti Roberto

Hi
Install the full software on your computer and follow the following instructions:
Step 1: Print out a network report by pressing the "Setup" icon on the display,Choose Printer reports and select network configuration report and make a note of the IPV4 address from the document.
Step 2: On your computer,Go to control panel,Choose printers and faxes.Right click on the X451 printer and choose Properties.
>>Then select Ports>Add Ports>Standard TCP/IP Port,Click on new port whicjh would open up an installation wizard.
>>Click on Next and type in the IPV4 address an the box,Click on next>Finish
Donot forget to click on apply and try printing a Test page.
I hope this helps.

Satellite L350-171 not available in UK

Hello again!
Does anyone know why stock of L350-171 is all out?
I am trying to get a replacement from Tesco for mine which failed but Tesco do not know when they will get stock.
Also tried to look at other places selling online in the UK and they all show the laptop as out of stock. Hope it is not a discontinued product!!! I tried to call Toshiba Customer Services to ask but gave up after 15mins on hold :(.
Getting very itchy about paying for a new gadget but not holding/playing with it!!
Thanks

Hi
I dont believe this notebook model could be discontinued at this time.
Fact is that the L350 is one of the newest Sat series at this time and possibly this is the reason why the Satellite L350-171 is not available yet
Maybe you should wait a little bit.
Greets

Can't install network printer.. Drivers won't install

I am currently upgrading my Window XP pro machines to Windows 7 Ultimate "32 bit" I have software on the workstation that is VITAL to operation and no longer available for download and media is destroyed. I was successful in upgrading to Vista
32 and upgrading to Windows 7 Ultimate. The updates all installed and I figured I was home free.. :Not so MUCH: When I try to install any network printer It errors out at point of installing the driver. I am only having this issue on upgrades to Window 7 Ultimate.
On Machines I only upgraded to Window 7 Professional, the printer install fine. I am receiving the same error on any printer of any manufacturer, HP, Ricoh ,Canon..... 0x00000f0d...etc. I have cleaned out the printer and drivers, stopped and
started print spooler, and am running out of options.
Thanks in advance

Hi，
What is the detailed information of the error message?
I suggest you install the driver in a compatibility mode, see instructions in the following link
http://social.technet.microsoft.com/Forums/windows/en-US/80cae5ee-dc98-4a2f-8284-a1ab826059b7/how-to-install-a-hardware-device-driver-using-compatibility-mode
And it is recommended to view the manufacture website or contact the printer manufacture to check if they have a appropriate printer for Window 7 Ultimate.
Yolanda Zhu
TechNet Community Support

Unable to install network printer

hello:
i just got a network drive (Western Digital Netcenter) that has a print server as well. on my iBook (OS X 10.2.8) i can see the files on the network drive, but i cannot seem to add my printer (epson stylus photo r300). i can print fine from my PC from this networked printer. the instructions from WD say to click "Windows Printing" after clicking to add a printer, but this option is not available. any ideas?? thanks

no dice. sorry it's been a while for my response, but i've been out of town with the holiday. anyway, tried Wd-Netcenter as the share name as well as the printer name. WD says that the printer name should be the name of the model up to 13 characters, but printers with a name longer than 13 characters won't work with Mac and their network drive. no matter what i do i can install the printer, but when i try to print a document it times out with an error message saying "Cannot connect via Samba, will try again in x seconds" or something to that effect. i'm going to try updating the firmware on the network drive and try again but i'm not holding my breath given the level of support i've gotten from WD. thanks for all your help will update if i get things working....

Installing network printer and downloaded print drivers aren't recognized.

I downloaded drivers for the Canon ImagePRESS C1 and they seem to install just fine. However, when I install the network printer the driver is not listed anywhere. Even when I choose "Other" and point to the device folder the files are greyed out, and I can't select the driver. I've tried updates and resetting the print system an still no success. Any help would be greatly appreciated.
drh08

There are three printer options (at least here in Oz there is) available for the imagePRESS C1. There is the internal Canon printer board and two external print controllers - the imagePASS-T1 and the imagePRESS-Q1, which is what we have connected to our C1. Each of these print controllers have different drivers so you need to determine which one you have first. If you are not sure, then check with someone or have a look at the C1. If it has a white metal box hanging on the back of the copier with some network cables, then you have the T1. If there is a PC case connected to the copier then you have the Q1. If the network cable connects from the wall straight to a network card on the back left side of the machine, then you have the internal Canon board.
For the two imagePASS controllers, you can download the driver from the print controller, by opening its internal web page (type the copiers IP address into your web browser to access). These queues for these drivers are added via IP > HP Jetdirect-Socket and you should find the driver by searching for either T1 or C1 in the Print using menu.
If you have the Canon board, then how you create the printer queue depends on which driver you have downloaded. Could you tell me the driver name and version so I can explain the method of adding the printer queue.
PaHu

Want to install network printer

Hi,
I am running Xfce4 over Arch 7 on a small windows network. We have a HP Laserjet on the 'server' that I can see in the SMB Network portion of Xffm. What I haven't been able to do is install it so I can use it from my machine. I have tried to find Xfce4 docs that would help but have had no luck Can anyone help??
Also, while I'm at it, is there anywhere I can find detailed docs on the use of xffm? Again, I've tried but can't find any. The Xfce site seems to assume that a lot of stuff is alrady known.
Thanks,
Jim

Yes it is! However, can u explain how to change icon themes in detail. (I don't want to damage the system) The doc just says where u do it but not what to do.
Also, can u recommend a graphical editor (something like Kate in KDE)?
EDIT: Forget the editor remark. I just found GVIM!!
Jim

Satellite L350-171: Question about Draft N in Wlan card Intel 5100

Recently swapped to this machine after having fun with a P300.
My question is this; under the properties of the 5100 in Device Manager, there is an option to enable draft-n, but draft-n is not a option to select in the wireless mode.
Is draft-n a auto selection or am I missing something?

In my Intel WLan driver the Draft N is also not available in wireless mode.
There are only settings fro the A b or G. But the 802.11 N mode is enabled.
If this setting is enabled then your WLan will support the high throughput mode (MINO 802.11n)
So if your WLan router supports and provides the Draft N feature then your WLan card should choose it automatically.
PS; Please ensure that you are using the latest WLan driver from the Intel page!

Adding a Network Printer - 2012 Essentials

I am using small business server 2012 essentials and looking to purchase a network printer. The issue I see is that many of the printers I have researched do not have drivers for essentials. Some will list out R2, but I do not have that, only Essentials.
Is there a workaround to installing a printer or do the windows server 2012 drivers that most manufactures use work for the Essentials operating system. I already tried to install a Ricoh printer and used the windows server 2012 and R2 drivers, tried to manually
install the drivers, but did not work. Thanks

Hi ChrisCJK,
I agree with Cliff Galiher’s viewpoint.
Please browse the web site of printer manufacturer, and check if you can get a latest version of the driver. Then monitor if it can help you to add the printer for
Windows Server 2012 Essentials.
Meanwhile, please refer to the following article. It provided the details of installing Network Printer to Windows Server 2012 Essentials. The printer is different
with yours. However, may give some thoughts.
Windows Server 2012 Essentials : Add a Network Printer
http://titlerequired.com/2012/10/24/windows-server-2012-essentials-add-a-network-printer/
Hope this helps.
Best regards,
Justin Gu

Cannot Print to HP Network Printer

I'm trying to print from my MacBook to my HP LaserJet 4000N printer which is connected to a 2wire wireless router. I had no issues setting the printer up with my Windows computers using the HP Install Network Printer Wizard, but the wizard doesn't work with Mac OS. So I did a little digging and found the printer IP Address by printing out the Configuration Page, but inputting that IP Address into the add printer utility using LPD, IPP, or HP Jetdirect yields no results. I've also tried using the Gutenprint drivers for my printer with all combinations with no results. I never expected that adding a network printer for Macs would be more difficult than Windows! Anyone have any ideas or experience getting an HP Network printer to work?

Okay, that's unusual. Didn't think this model would use a proprietary language?
Anyway, I found a driver on the HP site for this model for OS X. Here's the link:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=25474&prodNameId=14956&swEnvOID=219&swLang= 8&mode=2&taskId=135&swItem=lj-57300-1

Since I installed a printer software Satellite L300 has stopped working

Hello there!
I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
when i load it up it goes to Windows error recovery:
'windows has failed to start.a recent hardware or software change might be the cause
if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
then it gives two options: Launch startup repair (recomended)
start windows normally
==========
-so i click launch startup repair (reccomended)
-then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
========
5 years ago Report Abuse
Additional Details
so i just click 'next'
========
then i have 5 options:
-startup repair
-system restore
-windows complete pc restore
-windows memory diagnostic tool
-command prompt
==========
startup repair says it cannot manually fix any problems
-system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
-windows comple pc restore says i need to insert a backup disk which I dont have
windows memory diagnostics tool says that windows is preventing this
============
but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
but i don't know where...i typed it in the command prompt but don't understand how to use it
=========
i also tried to click start windows normally but it won't work

If the problem is installed software, start notebook in safe mode and try to start system restore from there.
Please let me know which options are available. Can you roll back OS few days back?
Are some restore points listed there?

HP Laserjet 4100n network printer driver fails to install

I am trying to install the printer driver for an HP 4100n laserjet on an XP machine. I have downloaded the file "hp LaserJet 4100 Printing System (61.3 MB) from the HP web site. First issue is that upon executing the setup exe file the InstallShield stops at 99%. I have to end it via Windows Task manager. Occassionally I can get to 100% but I have no idea why only occassionally. If I boot into Safe Mode I get to 100% everytime.
Once in Safe Mode the wizard seems to operate properly, finding the printer on the network and returning the correct TCP address. I get to the end of the wizard and I get a Sever Error message and the wizard terminates.
I have two laptops and one other desktop connected to the 4100n via the network. I must be doing something wrong and could use some suggestions.
Thanks

Hi Cupcakekid,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Acrobat Reader 8.1.2 network print issue after installing XP SP3

I administer a network of 30+ workstations, and since installing Acrobat 8.1.2 and Windows XP Service Pack 3, I've been experiencing odd behavior from the print function in the reader.
Staff can open a pdf document with no issues, but when they try to print to a network printer, nothing happens. I then in turn open wordpad on their workstation, do a "File, Print", and the print functions properly.
I then can go back to the reader, and the print job will work.
Nothing has changed on my network in regards to previous settings, with the exception of installing reader 8.1.2, and XP SP3.
Any ideas, or potential solutions?

You are not alone. I hope you get some response. We have seen nor heard anything.
See: http://www.adobeforums.com/webx/?13@@.59b56569/6
Title: Adobe Reader v8.1.2 Compatible with Windows XP Pro SP3
One ray of hope is that it seems to be getting quicker. I don't know why but I'll take it!
When I go to this Windows XP link,
http://www.microsoft.com/windows/products/windowsxp/default.mspx
it says I am running SP2 instead of saying I am running SP3, which is what my System Properties says is installed. Just something to think about and perhaps check.
Good luck!

LaserJet 2550n network printer on XP host PC, can't install Windows 7 client laptop

Have Color LaserJet 2550n network printer connected to XP host PC. I can't install Windows 7 client laptop for printer. The wireless network is fine, I can access documents back and forth, merely the printer doesn't work and there's no way to download 64bit drivers for this printer from HP.

Resolved, not solved.
I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Satellite L350-171 - Installing network printer

Similar Messages

Maybe you are looking for