Satellite L350 - Access code for the router

Dear Sirs
I have a Toshiba Satellite L350 running Windows 7 Ultimate. For the first 5 months it remembered the wireless access code for the router. I then installed a BT Home Hub which I subsequently removed and from then on the Windows 7 machine will no longer remember the password.
I have spent hours on the phone with Microsoft to no avail. Can anyone help?

The problem is very simple but the solution is not.
As I said earlier the computer remebered the wirless access code for around 5 months.
I then installed a BT home hub (free from BT) and it worked fine and then I uninstalled it and reverted back to my D-Link router.
From this point on every time I turn on the computer I have to enter the wireless access code to connect to the internet and until I turn off the computer all works fine.
Microsoft have not been able to locate the problem and neither have BT hence this last attempt to try and find the solution.
Thanks for your reply and I look forward to some help.

Similar Messages

  • I have asked for the access code for the Photoshop that I have purchased.

    I have applied for an access code for the Photoshop that I have purchased. I sent a payslip as well as registration as a teacher. Can I get the access code from you? I purchaed the product early last month and have not recieved any information.
    Thanking you for your time and help

    do you have a serial number?  have you installed photoshop?  are you trying to activate and are you looking for an activation code?

  • Good afternoon! What to do if forgot an access code for write-off of money from the card?

    Hello!!!
    What to do if fogot an access code for write-off of maney from the card?

    If you made in app purchases in a game, and you did not receive the "items" you paid for, contact the developer of the game.  If you are unable to receive support from the developer, you then should contact the iTunes store and inform them that you did not recieve the purchased content. 
    IF iTunes store support refunds the money that you spent, I would suggest you NOT use the refunded money for the same items, as you may not receive a refund for the same thing again.
    Good Luck.

  • Access code  for abap

    Hi everyone,
    Can you please guys post the access code for abap to mscagin at yahoo com
    thanks
    sri

    What do you mean by access code? Is this the same as a developer key?

  • HT5961 I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number

    I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number, so how can I change it to receive it on my cell phone ?

    I found this in the iCloud Keychain FAQs:
    How do I set up iCloud Keychain on a new device if I don't have one of my other devices to approve from?
    If you don't have access to any of your other devices that are using iCloud Keychain, you can still set up iCloud Keychain on another device if you have these items:
    - Your iCloud Security Code
    - The device that is using the SMS-capable phone number you provided when you first set up iCloud Keychain. A verification code is sent via SMS to this phone number. If you don't have access to this number, contact Apple Support, who can verify your identity so that you can complete setup on your new device.
    - If you have these items, follow the iCloud Keychain setup steps documented above. Your iCloud Keychain will then be pushed from the cloud to the new device.
    So it seems that you would have to directly contact the Apple Support: http://www.apple.com/support/icloud/contact/

  • Cannot get access code for Showtime anytime on apple tv

    I have tried everything and Apple TV is giving me no access code for Showtime anytime. I restored the apple tv.
    Can anyone tell me how I can get a code on my apple tv. Thank you

    Hi Dean Conrad,
    If you are having issues activating or linking a 3rd-party content provider (like Showtime) on your Apple TV, you may find the information listed in the following article helpful:
    Apple TV: Troubleshooting third-party content providers - Apple Support
    Regards,
    - Brenden

  • IOS7 set access code for IPad4 after update.

    Why do I suddenly have an access code for my IPad4 after the ios7 update? I didn´t have an access code before, and I haven´t set one either. My wife says she hasen´t used the ipad since yesterday.  I can access the ipad through Itunes on my Macbook, but I can´t reset the ipad because I need to turn off the "icloud search" in the ipad settings (which I can´t access because I don´t know the access code).
    Can anyone help?
    Thanks,
    Rob

    Hey robertdbuckley,
    Thanks for the question. I understand you are experiencing issues with passcode lock. The following articles may help:
    iOS: Understanding passcodes
    http://support.apple.com/kb/HT4113
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Thanks,
    Matt M.

  • Locked Access Code for Network Preferences - treo650

    I've been using a used treo650 for about a year.  I finally decided to try the web usuage and had sprint activate it.  But it appears that the previous owner of my phone put a access code on the network preferences area I need to finish setting the phone up.  After working with Sprint tech support it looked like the only solution was to do a hard reset on the phone and have the sprint store configure the phone and web info - then I would hotsync to recover my data  - good plan - first part worked - sprint was able to configure the phone and it worked!  - But when I hotsync'd it to recover personal data the network preferences were overridden and I'm back to a lock network preference and no web access.
    Looking for a way of defeating the access code and still being able to hotsync -------   I have a few ideas put they are pretty drastic.
    Any Ideas?
    Post relates to: Treo 650 (Sprint)

    When you sync, you get a lot of little settings files along with the big databases containing your contacts and calendar. I don't know which files are responsible for network settings, but if you have time, you could rummage around in your profile folder. Not sure where yours is, but mine was under c:\Program Files\palmOne\username when I originally installed, and when I installed the downloadable version of Palm Desktop, it was created under c:\Program Files\Palm\username.
    == Edit ==
    A backup would be advisable.
    Message Edited by Jeffro on 12-03-2009 12:04 AM

  • Access Code for Long Distance

    I am unable to make long distance calls. Each time I try I get a recording stating the access code I entered isn't valid. What does this mean? I've never heard of using an access code for long distance.
    Thanks in advance for your help. 

    Could be mistake.
    You could have been slammed by another phone company.
    You didn't identify your type of phone service.  E.g Fios Digital Voice, Verizon Freedom Plan, etc..
    Remember you are talking to peers here.  Most likely you will need to use the CONTACT US button on any of the verizon webpage.
    http://www.verizon.com/support/residential/contact-us/index.htm

  • Why do I have to use security code for wifi router each time I turn on iPad 3?

    Why do I have to enter wifi security code for my router each time I turn on ipad3?  I have checked all the settings I could but is this a router problem?

    If you're hiding your network SSID and/or using WEP security, I think these can cause this problem.  If you're hiding your SSID, there's really no point in doing that since there are ways people can easily see it if they're looking to do harm anyway.  If you're using WEP security, consider changing to WPA2 which is much more secure than WEP.

  • Re: Satellite L350: Where to store the drivers mentioned by Tempro down loading drivers

    Can someone please explain where i have to save driver downloads that tempro keeps telling me are needed for my notebook?
    When i click save it always comes up with documents but surely this cannot be right.
    Please please help me?
    My system is windows home premium and Satellite L350 notebook

    Im not using the Tempro software but is there no option for patch changing?
    However, if the Tempro saves the files to a definite folder then you could check this folder and could move the drivers to the other area this should not be a big problem
    PS: To be honest I dont use this tool because its not necessary for me I mean I dont change any drivers if the notebook is running trouble free I read here many threads and met guys who updated the drivers for non apparent reason and then the problems begun.
    I follow this advice; never change a running system ;)

  • Ricoh Aficio MP C4501 with access codes for color printing

    Hi,
    I read the discuss called "Ricoh 3245C with access codes for color printing", and I have a similar problem with a Ricoh MPC4501 printer. The printer is connected to many Windows PCs and my brand new iMac. It requires just User Codes authenication. PostScript is not installed on the printer (could this be the problem?). I've tried all the suggestions brought up in the mentioned discussion but I still can't print. It seems like the printer is not connected to the Mac. Here are the answers to the questions asked in the previous discussion:
    Is PostScript module installed?
    No, I guess. PS is not one of the languages included on the Configuration Page.
    What languages does your printer understand?
    RPCS [3.10.14], PCL 5c [1.02] and PCL XL [1.02]
    What drivers are you using?
    I tried the one from the Ricoh site for OS10.8 (http://support.ricoh.com/bb/html/dr_ut_e/ra/model/mpc41/mpc41en.htm) as well as the driver (three downloads) from Linux (http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o). Neither worked. It might be helpful to mention that the Linux driver enabled me to print to a Ricoh Aficio MP 4001 that doesn't require authentication.
    How are you entering your User Code?
    Depending on the application. For Adobe apps, which are my main concern, I would have to click on the Printer button in the Print dialog to open the system Printer dialog, then enter the user code there under Job Log. I had to use the script provided in the previous discussion (http://webpages.charter.net/mbroughtn/beta/RicohUserCodes.zip) to add my User Code.
    How are you connecting to the printer -- what protocol?
    I'm not sure. I didn't find any of the protocols cited in the previous discussion on the Configuaration Page. If it helps, I know that the printer has an IP address on the network. And as I mentioned, it's mainly connected to many Windows PCs.
    Any help is appreciated. Thanks.

    Can't help with user codes, but I suggest you try IP HP jetdirect first whenever you add an enterprise net printer. You could always look on a windows computer for printer port configjration. There, you will find jetdirect called raw port 9100 protocol.

  • Script Component WebService Binary code for the script is not found

    I am using SSIS 2012 to access a Public Web Service
     http://marketinformation.natgrid.co.uk/MIPIws-public/public/publicwebservice.asmx
    However, when adding reference to WebService (not Service Reference),
    I receive the dreaded msg "Binary code for the script is not found"
    I have spent an age ploughing through the forums.
    Many replies seem to suggest not using Script Component to acces WebService.
    Should I write a .NET app  ?
    Any thoughts how I should proceed would be most welcome.
    thanks JohnJames

    Hi JohnJames,
    If I understand correctly, you already add this public web service via Add Service Reference option in the Script Component. Then you receive the error message when you trying to call the bindings and Contract settings stored in app.config file to access
    the web service.
    Please note that we cannot all the web service normal way as SSIS Script Component task doesn’t recongnise the app.config file. To fix this issue, we should define the BINDINGS via code rather than depending on the App.config file. For more details, please
    see the following blog:
    http://social.technet.microsoft.com/wiki/contents/articles/22587.consume-webservice-via-ssis-script-component.aspx
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How can i get access code for SAP 4.7 IDES version ?

    How can i get the access code for SAP 4.7 IDES version ?
    Thanks

    Hello Rahul,
    If you have registered / licensed IDES Version.
    You can generate Access code for Developer / Objects from http://service.sap.com/sscr
    Regards ,
    Santosh Karadkar

  • How to create the Access sequence for the Vendor+material+plant combination

    Hi all
    Please let me know How to create the Access sequence for the Vendormaterialplant combination..
    Whats the use? What its effect in purhcase and taxe..
    brief me please

    Hi,
    you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
    goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
    find the tax condition type. see in it which access sequence is attached.
    if there is none then use JTAX used for taxes in India.
    or you can create the similar one for your.
    to create the same goto OBQ2.
    new entry or copy JTAX.
    and assign the access sequence to condition type.
    this will resolve your problem if you just need to assign the access sequence.
    regards,
    Adwait Bachuwar

Maybe you are looking for