Satellite L350 - Error message on Windows 7 upgrade

I have a Satellite L350 & the Toshiba upgrade DVD. I'm getting an error message when it trues to uninstall Toshiba Password Supervisor prior to installing Windows 7.
Error message reads
Error Code -5004 0x7e
> >SetupDLL\SetupDLL.cpp(1966)
pAPP:TOSHIBA Supervisor Password
PVENDOR TOSHIBA
PGUID 4B1E87C3-00DE-4898-8E39-E390AAEF2391
$9.1.0.429
@Windows Service Pack 2 (6002)BT_OTHER 0.0
Help please!
Thanks
Martin

Tried doing that - error message occurs while setting up uninstall & asks me to 'finish previous setup and close other applications'. I think I've done all that. I get the same message if I try to access Supervisor password via Control Panel. I've cleaned the registry - still no luck.
Is it safe to ignore this uninstall & proceed?

Similar Messages

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Error message while while upgrading FIM RTM to FIM Service pack 1

Hi All,
I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
Regards,
Anirban Singha

HI Dominik,
Thanks for reply,
Event Error,
Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
MSI Logs:
CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:06:14: DetectServiceAccount. Return value 3.
MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
Action 15:06:14: SetupCompleteError.
Action start 15:06:14: SetupCompleteError.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
Action 15:06:14: SetupCompleteError. Dialog created
MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
Action ended 15:06:19: SetupCompleteError. Return value 2.
Action ended 15:06:19: INSTALL. Return value 3.
MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
Property(C): DiskPrompt = [1]
Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
Property(C): PID = 04783-270-0001260-04309
Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
Property(C): WWF35 = 3.5.30729.5420
Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
Property(C): SQLDB = FIMSynchronizationService
Property(C): EVENTSOURCE = FIMSynchronizationService
Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
Property(C): SQLServerStore = LocalMachine

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

When i try to install i tunes i get error message 7 windows error message 126

When i try to install i tunes i get error message 7 windows error message 126

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99304)

I keep getting the error message "Restore Windows" Finder application quit unexpectedly. When I click an icon on the desktop on my Mac Book Pro it does not respond.

I keep getting the error message "Restore Windows" When I click an icon on the desktop on my Mac Book Pro, it is not reaponding.

While holding down the option key, select "Go>Library" from the Finder. Navigate to the Preferences folder and you'll find "com.apple.finder.plist". Delete that file and restart.
Good luck,
Clinton

I'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

i'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

In general, when desktop software is using Flash Player, it's because they're embedding an Internet Explorer window in the application. If you don't have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop application isn't going to work.
So, fire up Internet Explorer
Go here: http://get.adobe.com/flashplayer/
Follow the prompts, and then re-launch the application after you've completed the installation in IE. Hopefully that sorts it out for you.

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. It does not show up under "Programs".

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

Does anyone know how to correct the download for itunes error message 7 windows 193?

I'm getting error message 7 (windows 193) when I download new itunes update.

Try Troubleshooting issues with iTunes for Windows updates - MSVCR80

Error message on Windows 2003 and Satellite M40x-184

hi
my laptop is Satellite M40x-184
with Os Xp Home edition
I want to insatall a second Os which is Windows 2003
but while installing it, happend a problem and the gives me a blue screen with this message:
'hardware malfunction nmi parity check / memory parity error the system has halted'
Please tell me how i can install 2 Os xp home edition and Windows 2003
thanks

Hi
This error message can occur if a hardware component malfunctions, or if there are damaged or incompatible drivers installed.
To solve this problem remove any extra memory modules that are in the computer, leaving only the least amount that is required for the computer to start and run Windows. Restart the computer to see whether the error messages persist.
This issue was described on the Microsoft website.
Please check this site:
http://support.microsoft.com/default.aspx?scid=kb;en-us;315223&product=winxp

Grab error message: the window could not be captured

I'm using an iMac (27" late 2012) with 2.9GHz Intel Core i5, 24GB Memory, and 1TB storage. I have upgraded to Yosemite (10.10.2). I am using Grab version 1.8 (117).
I have gotten an error message while trying to Capture a Window for the latest SAP GUI (7.30 version 9) for the Mac. The error message pop-up says: "The window could not be captured. The contents of this window cannot be shared."
This is new, odd behavior. I can actually capture a Selection, by drawing around the Window, but I thought it was weird that Grab won't capture that Window. I can also use Mac keystrokes (Command-Shift-4, space and also Command-Shift-4 then select the window space).
Does anyone know why Grab won't Capture a Window for the SAP-GUI? It will Capture a Mac Window (e.g, Folder contents).

Details, please. Platfporm, OS, exact version of PS, etc.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

LR5 catalog error message after Windows 7 OS repair

I had BSOD happening shortly after installing 5.4 update first and second Canon scanner driver for windows 7 a couple days later. I wasn't sure which program was creating the BSOD so I tried a few things and BSOD was getting worse. I restored comp to later restore point when I created a LR5 restore point. Still had BSOD. So I just did a windows repair. When I got back to desktop the LR5 was back to 5.3 and Canon scanner was unplugged. So far its been 2 days and no BSOD. Now I went to start LR got an error message "Unexpected error opening catalog" I'm guessing since it was rolled back it can't reconize the catalog. I don't care for losing it because I did all the work I needed to do. So I can just start with new imports, but I can't open LR. Where do I go from here. Should I create a new catalog or update LR to 5.4 and see what happens. I hope it is not the update that was creating the BSOD. Any help thanks
Junior

My original post states I had upgraded LR5 to 5.4 and later installed Canon scanner shortly on another day. My conclusion was that my Canon scanner was the culprit because my original cd packaging was out of date which I did not realize until I tried to install it on my Wins 7 and message box said it was not going to work or compatible. I proceeded to Canon website to get a driver that will work with Wins 7 and installed it, a day later after using it to scan documents and started to get BSOD. It's been a few days now with no scanner installed and everything is working fine so far. Maybe by the weekend I will try to re-install the scanner or by a new one compatible with Wins 7.

TS3212 Installation package could not be opened. error message. Windows 7 64 bit

iTunes failed to run after using it successfully for over a year on this laptop running Windows 7 64 bit. Numerous attempts to download after uninstalling iTunes results in the error message below. Unable to install Safari as well, same error message.
Receiving the following message:
"This installation package could not be opened. Verify that the package exists and that you have access to it, or contact the application vendor to verify that this is a valid Windows Installer Package."

Nope, that's not it. I've got the same issue, or close to it. The update downloads, a message box opens stating that the file has an invalid signature, and the installer file is deleted. 10.6.3 has attempted to update numerous times, all with the same result. Update is up-to-date, downloading the file always produces the same result and every so often iTunes update comes up to repeat this process. With the volume of posts regarding this issue, why is it that the assumption is always to 'reinstall (repair) the software.' Why doesn't anyone take a look at whether something's broken with the upgrade? Too much trouble? You should try attempting to repair installs once a week or so, now _that's_ a hassle.

Lots of Anyconnect Error Message in Windows Event Log

Hi Community.
We have lots of Anyconnect Error Messages in the Windows Event Log. Following two examples.
Can anyone tell me why these errors appears and how do I fix them ? I already installed the newest Anyconnect on my machine.
Thanks in advance and Kind Regards Patrick
Example 1
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97564</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::logProbeFailure File: .\NetEnvironment.cpp Line: 1432 Invoked Function: CHttpProbeAsync::SendProbe Return Code: -27066354 (0xFE63000E) Description: HTTP_PROBE_ASYNC_ERROR_CANNOT_CONNECT HTTP (host: 109.164.211.237)</Data>
</EventData>
Example 2
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97565</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::TestAccessToSG File: .\NetEnvironment.cpp Line: 1385 Invoked Function: CNetEnvironment::analyzeHttpResponse Return Code: -28966899 (0xFE46000D) Description: NETENVIRONMENT_ERROR_PROBE_INCOMPLETE:Network Probe could not contact target</Data>
</EventData>

HI and welcome to Discussions,
in my personal opinion there is not much for you to worry about.
The 'Windows Tool for the elimination of malware' is nothing you miss as long as you have a decent Anti-Virus Software running.
The update for the IE 7 might be missing an installed IE 7, which can do by downloading it yourself from Microsofts webpage.
If you don't use the IE but something like Firefox or Opera or Safari, than don't bother with these update.
Stefan

Satellite L350 - Error message on Windows 7 upgrade

Similar Messages

Maybe you are looking for