Satellite L350 - touchpad FN and F9 key is not working

hello,
I have a toshiba laptop Satellite L350 with Vista 32 bit, and my problem is NOT working FN keys.
I've installed allready Synoptics Touch Pad V6.3 from Toshiba website, but it didnt help.
I've searched for other mentioned software posted on this forum, but i couldnt find.
The biggest problem ist that my touchpad is blocked, and not-working FN+F9 made
Me use just keyboard - which is difficult and annoying :(
I would be really greatefull if somebody can help me :(
hugs,
Kate

Dear great people THANK YOU VERY MUCH - THANK YOU 1000 TIMES !!!!! :)
My touchpad is working again :D, am really really happy about this, and really grateful !!!
You are so great and intelligent, I wish I had knowledge like this, because with computers am totally lost.
Of course all your instruction helped, and everything is working properly !! :)
Thank you one more time... you are really great !
Hugs,
Kate
ps. I will not block my touchpad again - just in case ;P

Similar Messages

  • HT4818 my zero and nine key are not working

    my zero and nine key are not working and also //////// symbol sometimes keeps repeating

    Try an external keyboard. If it works, you need a new internal keyboard.

  • "backspace", "g" and "h" keys are not working.

    hello,
    my laptop is HP 450 and windows 7.it is one years old. i haven't spilled anyting on it or damaed it in anyway i can think of.
    suddenly the "backspace" , "g" and " h " keys are not working. 
    please help me, because i have to complete my university assignment as soon as possible.
    tank you,
    shehara

    Hi,
    While this could be a hardware issue, it's always worth trying the following.
    Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
    Shutdown the notebook.
    Then unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have a MacBook pro and when I turned it on the number 9, o,l and .  Keys do not work.  Any help?

    I have a MacBook pro and when I turned it on I cannot get the 9, o l and . Keys do not work.   Any help?

    Probably mouse keys
    System Preferences > Universal Access > Mouse and trackpad > Mouse Keys: Off
    Chris

  • Satellite P20: Fn+F5 and TV-button does not work

    Satellite P20, Windows XP SP2 keyboard problem.
    When I press Fn + F5, the computer does not show as earlier the different display options. TV button does not work also. I can change the different displays with my nVidia Display Driver.
    My keyboard is OK, there is no dust or fluids. I have newest BIOS update and Windows XP Service Pack 2. What program controls the keyboard functions in this case?
    How to repair this problem?

    Hello
    Obviously you have removed something or preinstalled your own operating system. Without Toshiba designed tools and utilities it will not work. I dont know exactly which of them are for doing this but please try to install Dritek Easy Button Util. /Sticky Keys V1.008, E-Keys Utilities and Toshiba Hotkey Utility.
    I hope it will help. If not please write again.

  • The caps lock and p key does not work

    All of a sudden my "p" key and "caps Lock" key are not working. tried pram and smc resets but does not help. Want to know if it is a hard ware or a software issue. Im using a a MAC Book Pro that i bought ony 15 days back

    First assumption: its faulty wiring, judging by this being your first post, im guessing its a new mac? Id call apple or replace it at the store you got it from if you didnt buy through online or applestore.

  • The numeric digits, space, and enter keys do not work on my iphone and resetting it is not helping... any other options

    I noticed that the following keys do not work on my iphone (space, language, numeric keys, enter/go buttons) what should I do, tried resetting it multiple times, but it didnt work.

    Restore from backup
    Restore as new
    http://support.apple.com/kb/HT1414

  • Satellite L305D-S5881: Touchpad and FN keys do not work after Win 7 installation

    I have recently installed windows 7 and all of a sudden yesterday my touchpad did not work.
    I was not able to move my mouse arrow at all.
    I had to purchase a wireless mouse so I could use my laptop.
    When I press the fn key plus f9 nothing happens to see if it is enabled or disabled.
    I have a satellite l305d-s5881
    thanks for your help

    Hi mate
    The Satellite L305D-S5881 belongs to the Toshiba US series and has been released for US market.
    You will need to visit the Toshiba US driver page in order to get all drivers.
    To get the touchpad working, you will need to install the Touchpad driver.
    Furthermore the FN buttons are controlled by VAP (value added package) and Flash Card Support Utility.
    You need to install both; firstly VAP and then Flash Cards.
    Here is the Toshiba US page:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
    Greets

  • Satellite - randomly the arrow keys, question mark key and z key will not work

    Sometime the arrow keys, question mark and z key work fine (like now) and sometimes they just don't work at all (like a minute ago).  I will just be typing and they will work and then just stop working, then work again.  They either all work or all do not work. This has been happening since about a week after I got the computer.  It is so annoying.  Can you please help me fix this problem?  I have a Satellite T135-S1309.
    Many thanks.

    Hi, 
    I've posted recently about keyboard problem, and have tried everything as everybody else, finally and oddly :-) the solution for my problem was to reconnect little flat cable that connects keyboard and MB :-D shown in step 10 on the following link:
    http://www.irisvista.com/tech/laptops/Toshiba-Satellite-X205/take-apart-laptop-2.htm
    ..so maybe your keyboard somehow strangely detached itself from mother-board just a bit and started creating all sorts of strange problems as mine... one cable line was without contact because flat cable was not attached properly anymore and mentioned keys stop working... I have also downloaded keyboard tester software that helped me find all keys and combination of keys that stop working ... so guys, try that and good luck!    

  • Satellite C50-A-15Q - arrow, question mark key and z key are not working

    I have a Satellite Pro, C50-A-15Q. All keys were working fine yesterday, today I turn the laptop on and the arrow keys, question mark key and z key are all not responding. Any idea how I can fix this?
    I have tried turning the laptop off and on, hoping (naively) that this would fix, but to no avail.

    As Tom already wrote, it is not easy to say for sure if this malfunction is result of defective keyboard or maybe keyboard controller. In my opinion troublemaker is the keyboard itself.
    Have you maybe updated BIOS or done anything that could be responsible for this?
    I presume your notebook is pretty new model with valid warranty so best option for you is to contact nearest Toshiba service provider and ask for help.

  • Satellite Pro C650 - arrow, slash, and z keys are not working

    Can any one help - my slash keys, arrow keys, z and question marks have stopped working.
    I have seen several other posts on various forums for exactly the same combination of keys.
    I have a Satellite Pro C650.

    Sounds like a keyboard malfunction.
    Can you use the external USB keyboard properly?
    If you did not notice the same problems using external keyboard, then I would recommend replacing the internal keyboard.

  • F2 and f3 key does not work

    Hello, I have a HP Pavilion 15-e014tx Notebook PC With Windows 10 as the operating system. My problem is that F2 and F3 keys (brightness control) suddenly stopped working today. I restarted it twice; nothing happened. What to do? Thanks.

    Hey, i had the same problem with my Hp 15 - ro14tx laptop. Just go to device manager right click on display adapters. and update the driver, it worked for me.  

  • Volume and eject keys are not working!

    Hello, i have a problem with my USB apple keyboard that come in pack with my iMac. When i turn on the computer everything is working fine but after using it for about 10 minutes my volume and eject keys stop working at all. What can you say about that? And when i disconnect and connect the keyboard from the computer it starts working again but not for a long time thought.

    Hello Folks,
    Got my super new 20" duo and i a having exactly the same problems. Volume keys don't work randomly, mouse stops responding and eject works most of the time but I have had problems.
    Tried different usb port getting the same.
    Will try another k'board and see if that makes a difference.
    I have seen another post else where and the chap got a replacement from apple. His mouse wouldn't function sparadically.

  • Backspace and enter keys are not working

    I have a Pavilion DM4 1200 CTO lapotop running on Win 7, 64 bit OS. Suddenly I see backspace, Enter, slash,up and down keys have become dead. Tried reinstalling keyboard drivers and  BIOS update, but no luck. Any help will be appreciated.

    I have a Pavilion DM4 1200 CTO lapotop running on Win 7, 64 bit OS. Suddenly I see backspace, Enter, slash,up and down keys have become dead. Tried reinstalling keyboard drivers and  BIOS update, but no luck. Any help will be appreciated.

  • My O, L, and '.' keys are not working!

    I have a question. I have a PowerBook G4, 1.5 GHz, Aluminum. Recently, my "o", "l", and "." keys are working intermittently. Half the time, they do not work. This is not a software problem as I have an external keyboard. Does anybody know what's going on??? I don't.

    Sounds like a cracked trace on the keyboard PWB.  Best to just replace the keyboard.  You might get more information at this link:
    http://www.powerbookmedic.com/Powerbook-Keyboard---G4-Aluminum-p-16506.html
    Replacement can be a bit involved:
    http://www.ifixit.com/Guide/Installing-PowerBook-G4-Aluminum-15-Inch-1-1-5-GHz-K eyboard/223/1
    In this case, the Titanium models have the Aluminum models beat, as replacing a Titanium keyboard is a 2-3 minute process, tops.

Maybe you are looking for

  • Logging in to Blackberry Protect from a BB

    Why can I not log in to Blackberry Protect on the web from a BB smartphone?  I have two BBs and if one is lost, it would be very handy to be able to trace/lock/wipe it from the other (or any other BB for that matter) using BB Protect. 

  • Change schema name without doing export and import

    Is there a way of changing the name of a database schema without having to create a new user and exportng objects from the old schema into the new schema? Are there any system tables that can be changed to modify schema name without creating a new sc

  • Can someone explain the benchmark?

    Below is the new benchmark. What confuses me is the difference between MBP and MB -- MB seems better than MBP. I understand that 2.0GHz is better than 1.83Ghz, but should the difference be this big? What's more, MBP has a dedicated VRAM. http://arste

  • Problems with effects in Elements 6 for Mac.

    can someone please help me. I have element 6 for mac and my effects pallette has the little pictures at the top but will not work when I click on them. I had tried re-installing the software and doing the Command/Alt and Shift when starting the progr

  • Error during installation of assembly...

    Hi, i have encountered this problem during installation of Itues after i have tried uninstalling it. Any one know what this means? An error occured drung the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey