Satellite L350D - Webcam hangs when using windows messenger

Does anybody knows this problem, when using windows messenger and the webcam the webcams hangs afther a few seconds..
Already reinstalled webcamdriver and messenger but the problem still is...

Did you install the Vista SP1?
If no, install the SP1 and follow with instruction below
If yes, try this;
Start the msconfig and disable the Windows messenger and chicony webcam from automatic loading.
Just remove the ticks and save the settings.
Reboot the notebook and check if you can use the webcam together with the messenger.

Similar Messages

WLS 8.1 hanging when using XA

I am having an issue with BEA 8.1 hanging when using XA. I have configured it
on several other Windows 2000 machines and not seen an issue. This particular
machine seems to hang and then give a time out error. ANy suggestions would
be appreciated. Below is the error that I am getting back and a thread dump.
java.lang.Exception: Exception while commiting Tx : Name=[EJB com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)],Xid=BEA1-001E3F8C31D9BB58DEB7(18601996),Status=Unknown,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=122,seconds left=2878,XAServerResourceInfo[lidPool]=(ServerResourceInfo[lidPool]=(state=new,assigned=none),xar=null),SCInfo[mydomain+brettjason]=(state=active),SCInfo[ds9FT+ds9server3]=(state=active),properties=({weblogic.transaction.name=[EJB
com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=brettjason+10.1.44.74:7001+mydomain+t3+,
XAResources={},NonXAResources={})],CoordinatorURL=ds9server3+10.1.19.141:7001+ds9FT+t3+);
nested exception is: javax.transaction.SystemException: Timeout during commit
processing
Exception while commiting Tx : Name=[EJB com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)],Xid=BEA1-001E3F8C31D9BB58DEB7(18601996),Status=Unknown,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=122,seconds left=2878,XAServerResourceInfo[lidPool]=(ServerResourceInfo[lidPool]=(state=new,assigned=none),xar=null),SCInfo[mydomain+brettjason]=(state=active),SCInfo[ds9FT+ds9server3]=(state=active),properties=({weblogic.transaction.name=[EJB
com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=brettjason+10.1.44.74:7001+mydomain+t3+,
XAResources={},NonXAResources={})],CoordinatorURL=ds9server3+10.1.19.141:7001+ds9FT+t3+);
nested exception is: javax.transaction.SystemException: Timeout during commit
processing
"ExecuteThread: '12' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x2
770EB70 nid=0xa34 in Object.wait() [2868f000..2868fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054801B8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '11' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x2
76E6858 nid=0x5f8 in Object.wait() [2864f000..2864fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480230> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '10' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x2
76E5C70 nid=0x670 in Object.wait() [2860f000..2860fd88]
at java.lang.Object.wait(Native Method)
- waiting on <054802A8> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054802A8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '9' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
6E50B0 nid=0x9c8 in Object.wait() [285cf000..285cfd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480320> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480320> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '8' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71B350 nid=0x9bc in Object.wait() [2858f000..2858fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480398> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480398> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '7' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71BC10 nid=0x7b8 in Object.wait() [2854f000..2854fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480410> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480410> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '6' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71D7D8 nid=0x848 in Object.wait() [2850f000..2850fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480488> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480488> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '5' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71C8F0 nid=0x9dc in Object.wait() [284cf000..284cfd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480500> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480500> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '4' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71C798 nid=0x824 in Object.wait() [2848f000..2848fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480578> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480578> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '3' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
60B420 nid=0x770 in Object.wait() [2844f000..2844fd88]
at java.lang.Object.wait(Native Method)
- waiting on <054805F0> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054805F0> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '2' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x26
F9FA10 nid=0xa64 in Object.wait() [2840f000..2840fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480668> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480668> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '1' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
580CC0 nid=0x8d8 in Object.wait() [283cf000..283cfd88]
at java.lang.Object.wait(Native Method)
- waiting on <054806E0> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054806E0> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '0' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x26
F8F6B0 nid=0x7a0 in Object.wait() [2838f000..2838fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480758> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480758> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"Signal Dispatcher" daemon prio=10 tid=0x008B4850 nid=0x978 waiting on condition
[0..0]
"Finalizer" daemon prio=9 tid=0x008FF7F8 nid=0x73c in Object.wait() [26cff000..2
6cffd88]
at java.lang.Object.wait(Native Method)
- waiting on <052A72C8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <052A72C8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x008FE370 nid=0xa08 in Object.wait() [26
cbf000..26cbfd88]
at java.lang.Object.wait(Native Method)
- waiting on <052A7330> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:426)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:113)
- locked <052A7330> (a java.lang.ref.Reference$Lock)
"main" prio=5 tid=0x002358F8 nid=0x8a8 in Object.wait() [6f000..6fc40]
at java.lang.Object.wait(Native Method)
- waiting on <052A7508> (a weblogic.t3.srvr.T3Srvr)
at java.lang.Object.wait(Object.java:426)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:1170)
- locked <052A7508> (a weblogic.t3.srvr.T3Srvr)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:384)
at weblogic.Server.main(Server.java:32)
"VM Thread" prio=5 tid=0x008FD138 nid=0x88c runnable
"VM Periodic Task Thread" prio=10 tid=0x008B3390 nid=0x8bc waiting on condition
"Suspend Checker Thread" prio=10 tid=0x008B3E68 nid=0x524 runnable

Running Windows XP (even fully patched up with SP3 and latest fixes), you probably will have an increasing risk of Windows and IE being attacked. Windows XP has been getting security patches every month for over a decade. So it seems likely that people will continue to discover vulnerabilities in Windows XP that, over time, will be exploited (i.e., used in attacks).
Windows 8.1? For a good experience, you probably would be better off getting a new computer than installing 8.1 on a system that is several years old. I realize not everyone's budget permits.
What else can you do? It remains useful and important to keep your third party applications, such as Firefox, and your browser add-ons, such as Flash, up-to-date. It's also a good idea to run quality security software. And practice safe browsing habits like avoiding questionable websites and peer-to-peer networking, and being suspicious of email attachments.

LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program

Hello!
We have the following problem:
LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
Best regards,
Matthias

Hello Sprice,
Browse the shipping examples according to “Directory Structure” and then select
DAQ to find the Traditional DAQ examples.
There a lot of examples that are written for counters (Counter >>
daq-stc.llb >> Count Edges (DAQ-STC).vi).
What kind of signals are your photons creating? Are they TTL compatible at a certain
frequency? You don’t care about overwriting
your buffer?
Respectfully,
Rob F
Test Engineer
Condition Measurements
National Instruments

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Corrupt data error when using Windows backup on Oracle

Our SAP servers include a SDLT internal tape drive that we use for doing a complete system backup. When using Windows Backup we get the following message in the backup log:
WARNING: Portions of "\oracle\T00\sapdata1\protd_2\PROTD.DATA2" cannot be read. The backed up data is corrupt or incomplete.
This file will not restore correctly.
This is occuring on a couple of different systems but the wierd thing is when this happens in occurs on one Oracle drive in one system and the other Oracle drive on another system i.e. the G: drive on our TST sysytem and the E: drive on another. The E: and G: drives contain the main Oracle datafiles.
Has anybody ever encounter something like this and what can I do about it?
Thanks;
Gale S.

Especially no backup tool would know about the
fact
that a Oracle block had been changed after it was
copied.
Now I have to contracdict
There are backup tools (e. g. OpenFile Manager from
Legato/EMC), that track the filesystem changes and
makes sure, the backups are consistent in sense of
filesystem blocks. We´re backing up some ORA
databases (non-SAP, 7.3.4 and 8.1.7) for ages now -
and I never saw this kind of corruptions.
Well, these Backup-Tools do perform copies I/O-Consistent. That's different than DB-Block-consistent in the first place. Anyhow due to the fact that the DBMS do have a syncronizing between I/Os and writing out the blocks this leads both to consistent blocks.
I just wonder, how the database would deal with such
"inconsistent" files. Given the fact, you start a
backup at filesystem block 0, the database is being
backed up and a transaction is committed and
something is written to block 100, 200 and 500. The
backup is on block 300. If you now restore the
database, it has the already commited block 500 in
the file but 100 and 200 are not yet written in the
database file. The redo will then find an already
commited transaction on 500. What magic will tell the
engine, that this is due to an online database
backup? I mean, if you set the tablespace to backup,
the engine "knows" the state - but if you just backup
the file, the engine is unaware of that... I´m just
curious how this is handled...
Well the trick here is: we tell the database before we plan to copy the data. When a ONLINE backup is done, the tablespaces are set into BACKUP mode. This changes two things for us:
1. The datafile headers of these tablespaces are not updated anymore although dirty blocks are still written out to these files. Since the control files that keep the SCN (system change number) are updated nevertheless, the database will know at recovery time that these files had been in online backup mode and do need recovery to become consistent again.
2. The UNDO-information is not only written out to the UNDO/ROLLBACK-Tablespace but additionally to the REDOLOGS. So, for the time where the tablespaces are in BACKUP mode, we have all information needed to make a block consistent again - regardless if a transaction had been commited or rolled back - in the redolog. So a full recovery of all changes is possible with
that.
That's basically the "magic" behind this.
If the copy of the datafile is done without this - well, then there's no magician in the world that would been able to get it consistent again. Online Backups with Oracle are only possible with BACKUP mode or RMAN (ok, and possible some 3rd party hacks...).
KR Lars

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

On G71-340US: very low volume when using DVD player, but OK when using Windows Media Player.

Just purchased new laptop G71-340US. Volume (at full tilt) is decent when using Windows Media Player, but when using DVD player, volume is so low I can't really hear volume on a movie unless room is completely quiet, and I am right in front of laptop. Any suggestions, or is it really this bad?

I don't have the answer, but I certainly agree. The G71-340us is severly under powered in the audio department. You would think with the extra room in the 17in. chasis they could have put a sound system with a lot more power. Other than that it's a great machine.

When using Windows 2007 in Vista and HP Deskjet 6620 the bottom line gets cut off

When using Windows 2007 in Vista 32bit and HP Deskjet 6620 printer, the bottom line gets cut off. I have searched and searched but find no fix. Please help. What I do find is HP blaming Microsoft and Microsoft blaming HP. Where is the fix??? Think of all of us frustrated users. Is there a fix out there????? I attempted to download a new driver, assign it then attempted the patch all to no avail. I was even told try to bold the document...still no fix. Where is the patch? This is an HP issue. Please assist.
I hope this gets addressed ASAP. In my search many have had this issue with HP. Here is one comment...and it does not look good..."I am extremely upset with this issue and spent far too long trying to work with HP support. The HP support person was hopeless. I gave up and went off on my own. I hope HP releases drivers that correct this problem rightly in the future."
If this is not fixed or addressed I am sure it will affect the future buying of HP products from me and others. Let's see HP come out of this issue smelling like a rose. I await the fix.
Message Edited by KimINgr on 07-13-2009 08:01 PM

I will reply to myself....there is a fix. Thanks to someone else who had the same issue, went round and round with HP and then had this issue escalated up to get a more experienced tech who then had the print driver 990C installed to replace the driver he had selected. Me I had the 6620 which is the correct driver but had the issues so I tried the 990C driver and guess what.....it worked!!!!!!! So, HP is this your driver issue or is it Microsoft? I say driver issue. You might want to get a patch out their for the fix.

Camera is hanging when using with flash

Hi Lenovo Team,
In lenovo vibe x2, camera is hanging when using with flash.Getting "Lenovo snapit isnt responding" error and screen hanged for sometime.after that when tried to open camera "Cannt cannot to camera " error is coming till when restart the phone.
Even tried Factory reset and software update.
Please provide the solution for the above issue.
Thanks,

Hi vijayprabhu,
I just tested the X2 however am not having the issue. I set flash to always on then took a picture using SnapIt however its fine.
Please check if you have the latest firmware S125.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Fire fox locks up and is real slow when using windows 7 64bit

I am using windows 7, 64bit
when you click on a "go to link" phrase/word the program either locks up or takes a real long time to to go to the link site.
program loads real slow (it take 3 to 4 times longer than in windows xp.
I am using fire fox 4.0.1, this problem is the same with earlier versions as well

I have followed the troubleshooting solutions, reset, no add-ons etc.. even full uninstall & reinstall. Nothing has worked to resolve the issue.
FF hangs with Not Responding is frequent, while this is hung, it locks up my entire PC and I cannot do anything including opening Task Manager.
My Workstation Specs:
OS: Microsoft Windows 8 Pro 64-bit
CPU: AMD FX-8350 Vishera 32nm Technology
RAM: 32.0GB Dual-Channel DDR3 @ 669MHz (9-9-9-24)
MB: ASUSTeK COMPUTER INC. M5A99X EVO R2.0 (Socket 942)
Graphics: 47LV4400 (1920x1080@60Hz) 2048MB GeForce GTX 660 (ASUStek Computer Inc)
HDD: 224GB TOSHIBA MKNSSDCR240GB ATA Device (SSD)
699GB Seagate ST750LX003-1AC154 ATA Device (SATA)
BluRay: PIONEER BD-RW BDR-208D ATA Device
Audio: Realtek High Definition Audio

CS5 Photomerge hanging when using many files

Hello,
I have managed to work around the issue, but it's annoying nonetheless.
The basic problem is that I've started creating very wide and tall Bokeh Panoramas or 'The Brenzier Method' http://www.ryanbrenizer.com/category/brenizer-method/
From Lightroom I select the images I want and 'merge to panorama in PS'. When I use say 2 - 30 images it's fine. However when I use say 160 (ridiculous I know) it will hang when merging the files, processor usage stays on 13%, but the progress dialogue bar doesn't animate. I tried it through photomerge and 'align all layers' from the edit menu. I reduced this ridiculous amount to 60 and if I chose the 'vignette removal' option on the photomerge dialogue it will hang on this process after starting to create the panorama. If I don't do the vignette, it will create the panorama.
I know that it will depend upon the complexity of the merge, it's just annoying that it would fail whereas Microsoft ICE will complete the panorama without fail, it just may be of a lesser accuracy due to parallax.
Other than using less images and attempting to overlap correctly, is there much else that can be done?
I'm using an up to date version of CS5 64bit windows. running on a 16gb Core i7 2600k. The merged final image occupies 13gig of ram. I have the scratch disc on a spare 2tb drive with about 1.5 tb free.
Paul

Mr_Fujisawa, I just wanted to come back on here and thank you for opening my mind to the "Brenizer Method", which I had not heard of before. I've been experimenting with it today and enjoying the results! Up to now I put effort into getting everything in focus all across my panos, which are generally landscapes. It didn't dawn on me to use stitching on subjects up close.
-Noel

Flash Player hangs when using Firefox FLash player version 11.4

my flashplayer hangs while using firefox or ie browser, I am using latest 11.4 version of flashplayer similar issues were occuring in 11.3 as well I am on windows vista, what should i do. I see several processes of flashplayer in the task manager when it hangs.
Please help

What is your Firefox version?
Does it also hang when you go to http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
Can you give us a link to a page where it hangs?
What are the Flash Player process names you see in Task Manager?

Swing hangs when using BufferedReader

Swing hangs when I use a buffered reader. I must be doing something wrong but don't understand what it is. If I comment out the JFrame at the begining of the following code, the input part works but the Threads window won't display. If I add the JFrame then the window displays but hangs until I type something into the input. I have tried using invokeLater on the second thread with no success. What is going on?
import boeing.agps.formatting.UtSys;
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTextPane;
import javax.swing.SwingUtilities;
import javax.swing.text.BadLocationException;
import javax.swing.text.Document;
import javax.swing.text.SimpleAttributeSet;
import javax.swing.text.StyleConstants;
* To change the template for this generated type comment go to
* Window>Preferences>Java>Code Generation>Code and Comments>Types
* @author slr6053
* @version $Id: $
public class Test {
   static BufferedReader bufferedReadderIn = new BufferedReader(
                                             new InputStreamReader( System.in ) );
   public static void main( String[] args ) {
      new JFrame();
      Thread t = new Thread( new Runnable() {
         public void run() {
            System.out.println( "Before while" );
            while ( true ) {
               String input;
               try {
                  System.out.println( "Before input" );
                  input = bufferedReadderIn.readLine();
                  System.out.println( "After input " + input );
               } catch ( IOException e ) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
               } // read extension
      t.start();
      ThreadsWindow threadsWindow = new ThreadsWindow( "Test Thread" );
      threadsWindow.setVisible( true );
      Thread x = new Thread( threadsWindow, "Threads Window") ;
      x.start();
* Create a stand-along window that displays the current hierarchy of
* Thread-Groups and Threads, updating the information every second.
* A typical output looks like:
* Note: Thread "AGPS Main" will die and become "Thread-0" at the end of main().
* <pre>
* THREAD INFORMATION: 20-SEP-2002 17:49:28.0181
* ThreadGroup "system": Max Priority = 10
* +-> "Signal dispatcher" Priority=5 Daemon=true
* +-> "Reference Handler" Priority=10 Daemon=true
* +-> "Finalizer" Priority=8 Daemon=true
* +ThreadGroup "main": Max Priority = 10
* +-+-> "AWT-EventQueue-0" Priority=6 Daemon=false
* +-+-> "SunToolkit.PostEventQueue-0" Priority=6 Daemon=false
* +-+-> "AWT-Motif" Priority=6 Daemon=false
* +-+-> "Screen Updater" Priority=5 Daemon=false
* +-+-> "TimerQueue" Priority=5 Daemon=true
* +-+-> "Thread-0" Priority=5 Daemon=false
* +-+-> "Help Thread" Priority=4 Daemon=false
* +-+-> "AGPS Execution" Priority=5 Daemon=false
* +-+-> "SEE Threads" Priority=5 Daemon=false
* +-+-> "Basic L&F File Loading Thread" Priority=4 Daemon=false
* +-+-> "Basic L&F File Loading Thread" Priority=4 Daemon=false
* +-+-> "Basic L&F File Loading Thread" Priority=4 Daemon=false
* </pre>
* @version $Id: ThreadsWindow.java,v 1.6 2007/08/22 14:39:02 slr6053 Exp $
class ThreadsWindow extends JFrame implements Runnable, ActionListener {
   private JTextPane textArea ;
   private JButton startStop, closeBtn ;
   private boolean updateInformation = true ;
   private boolean exitThread = false ;
   private Document doc;
   private SimpleAttributeSet att;
   private SimpleAttributeSet attRed;
   private SimpleAttributeSet attBold;
   private SimpleAttributeSet attBold1;
    * Create and show a window that will display the Threads used in the
    * current JVM. The display will be updated every second from a newly
    * created Thread "SEE Threads".
    * @param title The window title for the window.
   public ThreadsWindow( String title ) {
      super( title ) ;
      setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      textArea = new JTextPane() ;
      att    = new SimpleAttributeSet();
      attBold1 = new SimpleAttributeSet( att );
      StyleConstants.setBold( attBold1, true );
      StyleConstants.setFontSize( attBold1, 14 );
      attBold = new SimpleAttributeSet( att );
      StyleConstants.setBold( attBold, true );
      attRed = new SimpleAttributeSet();
      StyleConstants.setForeground( attRed, Color.red);
      StyleConstants.setBold( attRed, true );
      doc = textArea.getStyledDocument();
      getContentPane().setLayout( new BorderLayout() ) ;
      getContentPane().add( new JScrollPane().add(
             new JPanel().add( textArea ) ), BorderLayout.CENTER ) ;
      startStop = new JButton( "Start/Stop" ) ;
      closeBtn = new JButton( "CLOSE" ) ;
      JPanel buttons = new JPanel() ;
      buttons.setLayout( new GridLayout( 0, 2 ) ) ;
      buttons.add( startStop ) ;
      buttons.add( closeBtn ) ;
      startStop.addActionListener( this ) ;
      closeBtn.addActionListener( this ) ;
      getContentPane().add( buttons, BorderLayout.NORTH ) ;
      setSize( 300, 400 ) ;
   } // end of constructor()
    * Handle the buttons.
   public void actionPerformed( ActionEvent e ) {
      Object srcIn = e.getSource() ;
      if( srcIn instanceof JButton ) {
         JButton src = (JButton)srcIn ;
         if( src == startStop ) {
            updateInformation = !updateInformation ;
         } else if( src == closeBtn ) {
            updateInformation = false ;
            exitThread = true ;
            setVisible( true ) ;
            dispose() ;
         } // end else if
      } // end if
   } // end of actionPerformed()
    * While true, sleep 1 second and then repaint.
   public void run() {
      if ( SwingUtilities.isEventDispatchThread() ) new Exception().printStackTrace();
      setVisible( true );
      while( !exitThread ) {            // do forever
         try {
            Thread.sleep( 1000 ) ; // update every second
         }catch( Exception sEx ) {
         if( updateInformation )
            repaint() ;
      } // end while
   } // end of run()
    * Display the hierarchy of Thread-Groups and Threads.
   public void paint( Graphics g ) {
      super.paint( g ) ;
      if( updateInformation ) {
         try {
            doc.remove( 0, doc.getLength() );
            doc.insertString( 0, "THREAD INFORMATION: " +
                           UtSys.datTimSec() + "\n", attBold1 ) ;
         } catch ( BadLocationException e1 ) {
            // TODO Auto-generated catch block
            e1.printStackTrace();
         ThreadGroup rootT = Thread.currentThread().getThreadGroup();
         while( rootT.getParent() != null ) {
            rootT = rootT.getParent();
         }// end while
         try {
            buildThreadOutput( rootT, "" ) ;
         } catch ( BadLocationException e ) {
            // TODO Auto-generated catch block
            e.printStackTrace();
      } // end if
   } // end of paint()
    * Append to the textArea variable the passed ThreadGroup and any
    * Threads it contains. If it contains ant ThreadGroups, invoke this
    * method recursively on each of these threadGroups, etc...
    * @param tg The ThreadGroup to display
    * @param indent The indent-level String to preface each line with.
    *        This method appends "-+" to this String and passes it to the
    *        next recursive invocation.
    * @throws BadLocationException
   private void buildThreadOutput( ThreadGroup tg, String indent ) throws BadLocationException {
      doc.insertString( doc.getLength(), "   ThreadGroup " +
                       "\"" + tg.getName() + "\":" +
                       " Max Priority = " + tg.getMaxPriority() +
                        "\n", attBold );
      indent = "      ";
      Thread threadArray[] = new Thread[ tg.activeCount() ];
      int threadCount = tg.enumerate( threadArray, false );
      for( int i = 0; i < threadCount; i++ ) {   // THREADS
         Thread thread = threadArray;
doc.insertString( doc.getLength(), indent + thread.getId()+" "+
" \"" +thread.getName() +
"\" Priority=" + thread.getPriority() +
" Daemon=" + thread.isDaemon() +
" Active= "+ thread.isAlive() +
" Interuppted= "+ thread.isInterrupted() +
"\n", att ) ;
} // end for
ThreadGroup threadGroupArray[] = new ThreadGroup[
tg.activeGroupCount() ];
int threadGroupCount = tg.enumerate( threadGroupArray, false );
for( int i = 0; i < threadGroupCount; i++ ) { // THREADGROUPS
buildThreadOutput( threadGroupArray[i], indent ) ;
} // end for
} // end of buildThreadOutput
} // end of ThreadsWindow class

OK, this code is closer to my application. If I have the JFrame code in, it works but hangs - that is you can type in "doit" in the command line and the window comes up, and you need to type something else in the command window in order for the ThreadWindow to start updating. If you try to move the ThreadWindow it hangs.
If you comment out the begining JFrame, the ThreadsWindow never starts. What is that I'm not understanding. The BufferedReader is not in the Main thread, it is in its own thread.
import boeing.agps.formatting.UtSys;
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTextPane;
import javax.swing.text.BadLocationException;
import javax.swing.text.Document;
import javax.swing.text.SimpleAttributeSet;
import javax.swing.text.StyleConstants;
* To change the template for this generated type comment go to
* Window>Preferences>Java>Code Generation>Code and Comments>Types
* @author slr6053
* @version $Id: $
public class Test {
   static BufferedReader bufferedReadderIn = new BufferedReader(
                                             new InputStreamReader( System.in ) );
   protected static boolean condition = false;
   public static void main( String[] args ) {
      new JFrame();
      Thread t = new Thread( new Runnable() {
         public void run() {
            System.out.println( "Before while" );
            while ( true ) {
               String input;
               try {
                  System.out.println( "Before input" );
                  input = bufferedReadderIn.readLine();
                  System.out.println( "After input " + input );
                  if ( input.equals( "doit" )) {
                     System.out.println("DOIT");
                     condition = true;
               } catch ( IOException e ) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
               } // read extension
      System.out.println("First thread started");
      t.start();
      ThreadsWindow threadsWindow = new ThreadsWindow( "Test Thread" );
      Thread x = new Thread( threadsWindow, "Threads Window") ;
      System.out.println("Second thread started");
      x.start();
    * @return Returns condition.
   public static boolean isCondition() {
      return condition;
* Create a stand-along window that displays the current hierarchy of
* Thread-Groups and Threads, updating the information every second.
* A typical output looks like:
* Note: Thread "AGPS Main" will die and become "Thread-0" at the end of main().
* <pre>
* THREAD INFORMATION: 20-SEP-2002 17:49:28.0181
* ThreadGroup "system": Max Priority = 10
* +-> "Signal dispatcher" Priority=5 Daemon=true
* +-> "Reference Handler" Priority=10 Daemon=true
* +-> "Finalizer" Priority=8 Daemon=true
* +ThreadGroup "main": Max Priority = 10
* +-+-> "AWT-EventQueue-0" Priority=6 Daemon=false
* +-+-> "SunToolkit.PostEventQueue-0" Priority=6 Daemon=false
* +-+-> "AWT-Motif" Priority=6 Daemon=false
* +-+-> "Screen Updater" Priority=5 Daemon=false
* +-+-> "TimerQueue" Priority=5 Daemon=true
* +-+-> "Thread-0" Priority=5 Daemon=false
* +-+-> "Help Thread" Priority=4 Daemon=false
* +-+-> "AGPS Execution" Priority=5 Daemon=false
* +-+-> "SEE Threads" Priority=5 Daemon=false
* +-+-> "Basic L&F File Loading Thread" Priority=4 Daemon=false
* +-+-> "Basic L&F File Loading Thread" Priority=4 Daemon=false
* +-+-> "Basic L&F File Loading Thread" Priority=4 Daemon=false
* </pre>
* @author Tom Dickens
* @version $Id: ThreadsWindow.java,v 1.6 2007/08/22 14:39:02 slr6053 Exp $
class ThreadsWindow extends JFrame implements Runnable, ActionListener {
   private JTextPane textArea ;
   private JButton startStop, closeBtn ;
   private boolean updateInformation = true ;
   private boolean exitThread = false ;
   private Document doc;
   private SimpleAttributeSet att;
   private SimpleAttributeSet attRed;
   private SimpleAttributeSet attBold;
   private SimpleAttributeSet attBold1;
    * Create and show a window that will display the Threads used in the
    * current JVM. The display will be updated every second from a newly
    * created Thread "SEE Threads".
    * @param title The window title for the window.
   public ThreadsWindow( String title ) {
      super( title ) ;
      setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      textArea = new JTextPane() ;
      att    = new SimpleAttributeSet();
      attBold1 = new SimpleAttributeSet( att );
      StyleConstants.setBold( attBold1, true );
      StyleConstants.setFontSize( attBold1, 14 );
      attBold = new SimpleAttributeSet( att );
      StyleConstants.setBold( attBold, true );
      attRed = new SimpleAttributeSet();
      StyleConstants.setForeground( attRed, Color.red);
      StyleConstants.setBold( attRed, true );
      doc = textArea.getStyledDocument();
      getContentPane().setLayout( new BorderLayout() ) ;
      getContentPane().add( new JScrollPane().add(
             new JPanel().add( textArea ) ), BorderLayout.CENTER ) ;
      startStop = new JButton( "Start/Stop" ) ;
      closeBtn = new JButton( "CLOSE" ) ;
      JPanel buttons = new JPanel() ;
      buttons.setLayout( new GridLayout( 0, 2 ) ) ;
      buttons.add( startStop ) ;
      buttons.add( closeBtn ) ;
      startStop.addActionListener( this ) ;
      closeBtn.addActionListener( this ) ;
      getContentPane().add( buttons, BorderLayout.NORTH ) ;
      setSize( 300, 400 ) ;
   } // end of constructor()
    * Handle the buttons.
   public void actionPerformed( ActionEvent e ) {
      Object srcIn = e.getSource() ;
      if( srcIn instanceof JButton ) {
         JButton src = (JButton)srcIn ;
         if( src == startStop ) {
            updateInformation = !updateInformation ;
         } else if( src == closeBtn ) {
            updateInformation = false ;
            exitThread = true ;
            setVisible( true ) ;
            dispose() ;
         } // end else if
      } // end if
   } // end of actionPerformed()
    * While true, sleep 1 second and then repaint.
   public void run() {
      while( !exitThread ) {            // do forever
         if ( Test.isCondition() ) {
            setVisible( true );
            try {
               Thread.sleep( 1000 ); // update every second
            } catch ( Exception sEx ) {
            if ( updateInformation )
               repaint();
         } // end if
      } // end while
   } // end of run()
    * Display the hierarchy of Thread-Groups and Threads.
   public void paint( Graphics g ) {
      super.paint( g ) ;
      if( updateInformation ) {
         try {
            doc.remove( 0, doc.getLength() );
            doc.insertString( 0, "THREAD INFORMATION: " +
                           UtSys.datTimSec() + "\n", attBold1 ) ;
         } catch ( BadLocationException e1 ) {
            // TODO Auto-generated catch block
            e1.printStackTrace();
         ThreadGroup rootT = Thread.currentThread().getThreadGroup();
         while( rootT.getParent() != null ) {
            rootT = rootT.getParent();
         }// end while
         try {
            buildThreadOutput( rootT, "" ) ;
         } catch ( BadLocationException e ) {
            // TODO Auto-generated catch block
            e.printStackTrace();
      } // end if
   } // end of paint()
    * Append to the textArea variable the passed ThreadGroup and any
    * Threads it contains. If it contains ant ThreadGroups, invoke this
    * method recursively on each of these threadGroups, etc...
    * @param tg The ThreadGroup to display
    * @param indent The indent-level String to preface each line with.
    *        This method appends "-+" to this String and passes it to the
    *        next recursive invocation.
    * @throws BadLocationException
   private void buildThreadOutput( ThreadGroup tg, String indent ) throws BadLocationException {
      doc.insertString( doc.getLength(), "   ThreadGroup " +
                       "\"" + tg.getName() + "\":" +
                       " Max Priority = " + tg.getMaxPriority() +
                        "\n", attBold );
      indent = "      ";
      Thread threadArray[] = new Thread[ tg.activeCount() ];
      int threadCount = tg.enumerate( threadArray, false );
      for( int i = 0; i < threadCount; i++ ) {   // THREADS
         Thread thread = threadArray;
doc.insertString( doc.getLength(), indent + thread.getId()+" "+
" \"" +thread.getName() +
"\" Priority=" + thread.getPriority() +
" Daemon=" + thread.isDaemon() +
" Active= "+ thread.isAlive() +
" Interuppted= "+ thread.isInterrupted() +
"\n", att ) ;
} // end for
ThreadGroup threadGroupArray[] = new ThreadGroup[
tg.activeGroupCount() ];
int threadGroupCount = tg.enumerate( threadGroupArray, false );
for( int i = 0; i < threadGroupCount; i++ ) { // THREADGROUPS
buildThreadOutput( threadGroupArray[i], indent ) ;
} // end for
} // end of buildThreadOutput
} // end of ThreadsWindow class

How to open document from mac when using windows without transferring the file?

How can i open a document from mac when i am using windows without transferring it?

depend on the document program more then anything else really
when ever I open a doc with word it make a history for undo and redo action file in the same dir
with bootcamp you only have read not write access to the osx partition so it would fail to be able to create that file
but if you can get word or whatever program you use to open the file not to place a temp file in the same dir
or use a program which did not make any type of temp file or used a program where the temp file would be located elsewhere where you decide it would work file

Satellite L350D - Webcam hangs when using windows messenger

Similar Messages

Maybe you are looking for