Satellite L350D - WLAN not working after recovery disk

Hello there
I just got a L350D. I ran the Recovery Disk tool, without any other programm running. It was on a good way of finishing the second disk and than: BAM! blue screen. Since the start up, my LAN and WLAN is not working.
It always says "WLAN 2.0 bg Adapter" to which no driver is found. The correct driver is a Realtek for both WLAN and LAN.
Do you think the crash busted the WLAN and LAN module?
Things i tried:
System reset
Driver reinstall
but nothing worked.
Has anyone any hints?
Thanks a lot!
mycale

Hi!
I dont know what the reason is for this BSOD during the installation but can you post the BSOD code? So you can search on the Microsoft Knowledge Base for this code.
Furthermore I would try to update the BIOS of your notebook that you can find on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
After you have updated the BIOS try to update the driver of WLAN and LAN card or try to reinstall Windows again using the Toshiba recovery disk.
Bye

Similar Messages

Satellite L450D Webcam not working after new installation without recovery

Hi there,
as posted in the thread title I have a problem with the integrated webcam of a customer notebook. Two days ago the operating system of this laptop was damaged by a virus and needed to be re-installed. I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
The only thing that worked was a clean install with a windows 7 64 Bit retail dvd and the key printed on the sticker of the laptop. I managed to get everything working again except one part - the webcam.
No driver installation, bios update and re-installation worked to get this part to work.
Did anyone of you know this problem and have a fix for me?
Thanks in advance.
Greetings Saphire
P.S.: One thing shall be also important. When I look into the installed devices manager the driver for the webcam is listed as usb webcam and the manufaturer of it is Microsoft.

Hi
I dont think that this needs to be fixed because I dont think its hardware related issue.
I think there is something wrong with the software on your notebook.
I mean everything worked perfectly until virus has damage the OS. Right?
You said this:
>I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
I really wonder why you could not get this working using Recovery disk.
So possibly this is the key to this issue
On the Toshiba European driver page I could find Registry Patch v1.1 For Win 7 64bit
Also webcam driver v 1.1.1.4 is available there
I think the OS is responsible for your issue possibly some patches are applied or similar

WLAN not working after v30 update on N95

I saw a previous thread about WLAN not working on the N96 after update.
I can now confirm that WLAN is also bugged for the N95-1 after firmware update to v30.
It tries connecting, then after a few seconds, I always get the message "WLAN: Unable to connect. WLAN network not found"
This did not happen a few minutes before the update. Last firmware version was the v22 (latest one before v30)
Has any fix been found? My main usage for my phone is for the wifi, and without it I can't do much

Nokia is the host of this forum, however the forum operates and functions with the participation of common folk, users from all over the world that either share passion for Nokia or are looking for support and answers from other community members...if you want to complain to Nokia there is a : Contact us - button on top right of this page...if you want to try to find answers patience sometimes is a virtue....now the issue of untrusted software, there are applications and sometimes themes that you have installed on your memory card/mass memory that will give that message when you go to application manager it will list the apps that are installed and that are not installed on your device, you can either install them manually or remove them from your phone, the next time you restart your phone you should have no problems with those messages. now the WLAN issue i am not sure about and I am almost certain it has nothing to do with your untrasted software messages.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Ms updates does not work after recovery win 7 pro on dv4-2167sb

info on problems with MS updates right after a new install of win 7 pro: does not install updates and will not install SP1 from down load . I used recovery disks I made. The OS [win 7 pro] recovered great but MS updates did not work from the get-go.. {Personal Information Removed} HP NEEDS TO GET ME OS RECOVERY THAT WORKER I HAVE 4 OF THIS DV4-2167SB 'S
Been on the phone with hp [not US] for more than hr. talked to two svr. hungup on 3 times, HP needs some New VP's.

Hi VP_IA_DOT,
I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.
Thanks,
NicNac - HP Support Forums Moderator
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Wireless not working after Recovery on a P300

I recovered my P300 using the recovery disks and everything is fine except that it cannot pick up any wireless signals. The wireless switch and light is on but it seems the computer does not recognise the wireless adapter.

What's the full model number of your laptop? There should be a sticker on the bottom. "P300" is only partial.
Did wireless work before you did the recovery?
- Peter

Toshiba - A665-S5170: ambient light sensor not working after recovery

Hi all,
Two weeks ago I bought Toshiba - Satellite Laptop Model: A665-S5170 | SKU: 1859059
http://www.bestbuy.com/site/Toshiba+-+Satellite+Laptop+/skuId=1859059
I tried to resize the C: partition using the recovery option. It works fine ending with C: partition (100 GB) and D: partition (480GB)
All the divers and applications restored fine except the ambient light sensor.
I used system recovery to out-of-box state, but still have the same problem "ambient light sensor not working".
Would you please help me find a solution?
Thanks in advance.

I had the same problem. I tried resetting SMC but that didn't do the trick. Then I tried “Repair disc permissions“ and that fixed the problem.

Satellite M100 sound not working after installing Windows 7

Everything else is working after this upgrade except the sound. Have tried everything. Any suggestions?
Many Thanks.
Rory

Hi,
For me the case is clear: Windows 7 is not the market as yet and its not released as yet. So I think this is the problem.
Anyway, have you tried to install the driver from the Toshiba website? There you can also find the Synaptics driver. Its for Vista but normally the drivers for Vista are also work in Windows 7. Its worth a try.
http://www.csd.toshiba.com
Have you tried the key combination FN+F9? So you can enable and disable the touchpad but I doubt that this works. Normally you need the Toshiba utility for this
Greets

P20-102 Satellite - Remote Receiver not working after running recovery CD

Hi,
I'm running Windows Media Center Edition and on my P20-102 Satellite notebook.
I recently needed to run the recovery CD, the process went fine except that my external remote receiver box supplied with my notebook no longer works.
The box was working with XP Media Center Edition and the remote before I ran the recovery CD. The receiver is detected and installed on machine when plugged in and recognised in Device Manager as a USB Serial Converter. The light inside blinks about 4 seconds. When pressing a button on the remote the light lights up both in the receiver box and on the remote so it's receiving the signal.
I guess this a software problem, I can't find any information about installation of the receiver or any drivers for it.
Any Help would be greatly appreciated.
Kind Regards
Paul

I eventually spoke with someone who didn't sound like he knew what the answer was but told me update the BIOS - how was this going to help? It turned out I had the same version installed anyway. My remote receiver worked on day 1 with the same BIOS software on it.
I was also advised to install the chipset driver, again this was already installed - still not impressed!
Anyone have any ideas?

Satellite A100 - USB not working after XP installation

Hi Guys
I am reloading Satellite A100 PSAA9A OCV004 for a friend he has lost the disks so I have loaded a legal copy of XP home everything going well so far but I can't get the USB working any ideas?
Tnx Mick.

Hi Mick,
Have you installed new Service Pack 3 for Windows XP? This is important because it contains many important updates.
After Service Pack 3 installation you can start with driver installation. Everything you can download on Toshiba website.
Its also important that you install the chipset driver.

Re: Satellite L650D LAN not working after Win7 reinstallation

Hello friends
i have a big problem with my notebook
I just reinstalled the windows 7 home premium and now i cant access to internet
There is an unknown device in my device manager
I have downloaded many drivers but non is working for LAN.
Waiting for kind replies.
Toshiba Satellite L650D System Unit.
Model No: PSK1SA-03E014

>... but i have a product key with my notebook a label containing windows 7 home premium product key.
Unfortunately this key is useless and you cannot use it for own OS activation. This key belongs to original preinstalled OS.
In my opinion you should now waste your time waiting for someone who can help. Contact nearest Toshiba service provider and order original Toshiba recovery disc. It costs a bit but you will have original OS and you can use this disc for OS installation anytime if something goes wrong with your OS.

Satellite c55 - wifi not working after windows update

Laptop is running windows 7. Laptop rebooted itself and did a windows update, once i logged into it, the wifi is not located. This is the update that ran today. Update for Windows 7 for x64-based Systems (KB2952664)Installation date: ‎7/‎28/‎2015 11:44 AMInstallation status: SuccessfulUpdate type: RecommendedInstall this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.More information:
http://support.microsoft.com/kb/2952664Help and Support:
http://support.microsoft.com Help!

Kim, a Restore point should have automatically been made by Windows BEFORE processing the update. You should run System Restore using that restore point and then HIDE that update so that it isn't ever installed again.

Satellite L870-165 does not work after being repaired by their service

Laptop Toshiba warranty does not work after being repaired by their service twice.
Model: Satellite L870-165
Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
After reboot still happening the same.
I called Toshiba phone incident and after trying several options I said take him to repair the service.
They first told me it was the hard drive, then phoned me to indicate that reinstalling and finally it was the motherboard, which supposedly changed. The day after being picked computer repair returned to give exactly the same error, only malfunctioned one evening.
After another call to 902 the Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I got home the computer did not start even once, again gives the same error.
I believe that this team comes with a factory default so that its solution is not easy because even the technical service told me that I did not know what else to do with it.

>Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
This message pops up because the notebook cannot find the Windows system.
There could be either an problem with the HDD or maybe the HDD is OK but the Windows system isnt preinstalled properly.
You said that the service agent changed the HDD. But did someone install the Windows system?
You can try to do it yourself take your recovery disk (hopefully you created such disk in the past) and boot from the recovery disk in order to install the system.
In case booting from the Disk would not be possible, go to BIOS (F2) and disable the secure boot and change from UEFI to CSM mode

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

Changed Password Not working after restart[What to do]

Recently I've changed my password, but it's not working after restart.
I've noticed that, input option is not taking one of the password characters which is '!'.
I've the recovery disks, system accepts my fingerprint too.
Any help will be highly appreciated.
Thanks.

Hello,
Let me explain you what happened.
One evening I was trying to open my ThinkPad. Usually it asks for
fingerprint or password(I'm not sure which password, power-on/hard
drive). But this time I failed using my finger. and I tried with
password, but could not recall.
Then I restart and again tried with finger, this time it worked. Now
after login in Windows XP I removed all old fingerprints and create
few new. When I create new, it was asking for password, or new
password to replace. As I could not recall the pass, I've given new
password to replace.
Now to check I gave a restart. Fingerprint accepted for Power-on but
also asking for password again(Now I can see it's for Hard Drive). I
tried with new password. But it's not working. And even not taking one
character ('!') of the password.
Now can you tell me, if I did change password for Hard Drive in the
last description. Or is that possible to change it from Windows XP
environment. Else it's possible that the Hard Drive password remain as
it was which has been set from ThinkVantage before OS boot. Let me
know if you've any query which I've missed.
Thanks.

Satellite L350D - WLAN not working after recovery disk

Similar Messages

Maybe you are looking for