Satellite L40 - Sleed and stand-by does not work properly

I have a Satellite L40 notebook and it worked properly until now. I turn it on and after that I put it on the sleep mode (stand-by mode); when I want to use my system, so to get it back to the normal mode (I press the turn on/off button to get out of the sleep mode), the Windows Vista 32-bit restarts - it doesn't get back to the moment that I left it before the sleep mode.
Therefore, Windows Vista 32-bit restarts and the "Windows has been turned off incorrectly" screen appears instead of returning to the system configuration that I left it before the sleep/stand-by mode.
What can I do to fix this problem and make the sleep mode work properly?

Hi!
In your case I would make a BIOS update. You can search for updates on the Toshiba website
http://eu.computers.toshiba-europe.com
You should also look in the power mangment. There you configure what happened when you close the display, press the power button and so far.
I have found a really good thread about this:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=141529&#141529
Bye

Similar Messages

  • Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

  • Satellite L955-10K - Synaptics Touchpad Driver does not work properly

    Hello, ASRR here.
    I've been having a problem with my Synaptics touchpad driver since yesterday. I am very used to using the "gestures" to work with my touchpad and the gestures haven't worked properly (in fact at all) for a while. The two-finger scrolling, the three-finger touch and others (actually all of the gestures) do not work anymore.
    The cursor moves, and works fine but the gestures don't.
    When I go to the Mouse option in the Control Panel, a window pops up stating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me whether I want to uninstall it.
    I have tried uninstalling it, then going on the support page for Toshiba and downloading a driver that was suitable for my model, operating system, etc.
    When I set up the driver I downloaded and restart the PC, the same window pops up when I try and go to the Mouse options in the Control Panel and the gestures do not work.
    One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
    I have tried multiple times to fix it but I can't. I went to the UEFI firmware set up and tried resetting it to default but with no success.
    I really do not know what to do. Could somebody PLEASE help?
    My Toshiba Model is a Satellite L-955-10K with a 64bit processor and originally installed Windows 8 operating system.
    Any help would be greatly appreciated. Thanks

    >One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
    To me it looks like the Synaptics touchpad driver could not be installed properly and after the new restart the touchpad driver isnt indicated by the Windows 8 system.
    By the way: are you still using the Win 8? Didnt you upgrade the system to Win 8.1? Should do this since many different bugs have been solved in new Win 8.1 version.
    Back to the Synaptics touchpad driver.
    Usually the drivers should be downloaded from the Toshiba driver page but in some cases you could also use the drivers directly from manufacturer pages. In this case the touchpad driver has been released by Synaptics and it would be interesting to know how the touchpad driver from Synaptics driver page would act on your notebook
    http://www.synaptics.com/en/drivers.php

  • Satellite C50-B-14Z - Wi-Fi does not work properly

    I've bought my laptop 1 week ago (Satellite C50-B-14Z), but Wi-Fi is not working properly. Most of the time, it looks like it's connected to my network without any problem. However, It does not work, I can't surf the web.
    The router is new and all the conection has been checked by a staff member from the internet company.
    What can i do? All software is updated.
    Thanks.

    As mentioned by previous user; first of all you should check if the notebooks internet connection would work using the LAN.
    In case you will be able to connect to internet using LAN, you should check the WLan settings.
    For example: I would recommend you to disable the WLan encryption (within the router configuration menu) and to test the WLan connection to an open (not secured) wireless LAN.
    Of course this should be done only for testing purposes.
    In case the connection would work, test different kind of encryption (WPA/WPA2 AES TKIP)

  • HT4623 I did the latest update to my i pad 2 and now Safari does not work properly . I get messages that the java script needs to be turned on which I did. How do I get this all back after this update?

    I did the latest update to my I pad 2 and lost Safari . I was instructed to switch the Java script on which I did but Safari is still not working properly . how do I get everything back after this software update.

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • Save and Quit tabs does not work properly.

    When asked to Save and Quit tabs for the specific session is selected, Firefox does not restore tabs at the next session.
    I have read the posts where it is suggested to change the settings and simply never clear the history. However this is not the way that Firefox behaved in older versions, NOR IS IT A SOLUTION due to the following:
    The pop-up on exit to Save and Clear is clearly asking the user if that specific session should be remembered and then clearing the history should be superseded by saving instead. Otherwise, what is the point of asking the user to save? A pop-up warning saying that the tabs will not be remembered would be more appropriate.
    Regardless, the user has been asked if this specific session should be remembered, and this clearly being the last choice done by the user, supersedes the prior settings for this one specific session. The tabs should be remembered, as the user has instructed (and Firefox used to do in the past), and yet Firefox opens a new session having dumped the information.
    Changing the settings to remembering the history instead, does not serve people that want most times to clear it. This would then mandate a manual clearing of history every time before a session is ended instead.
    This will need a permanent fix/rollback to the way Firefox used to behaved in these circumstances in older versions.

    After transferring musics to the device selecting by mass storage mode you need to follow this
    Go to Device Menu> Music> Music Player> Option> refresh library
    have you followed this? if this does not help could you please provide more information sothat someone can help you to solve your problem?
    A. Device details ( type *#0000#)
    B. System Information details ( Help About- Ovi Suite- System Information : Copy & paste )
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Satellite Pro M30 Win 7 - webcam does not work on msn messenger

    Hi all
    I have a Satellite Pro M30 Modell Nr.: PSM35E and have just changed to Windows 7. But the Nvidia Card NVIDIA GeForceTM FX Go5200 Grafik mit 64 MB RAM does not work properly.
    I could find a driver from Vista and installed it, have Aero pics on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.
    Can someone help me?
    Thanks for your help

    Hi
    Im a little bit confused; do you have some problems with the graphic card or with the webcam?
    I assume you are speaking about external webcam connected to the USB port? Right?
    What happens if you connect the webcam to the notebook? Can Win 7 recognize the connected device? Did you install additional drivers for this webcam?
    In most cases its necessary to do that because I think its not plug & play device.

  • Thanks for responding.  Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all.  I had numerous apps, music and videos on this touch.  It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

    Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
    Can you help me?
    Thanks

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

    When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

    No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
    <Edited By Host>

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I am trying to open a service request and the site does not work.

    I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

    I just went through several screens and had no problems.  Try clearing your browser's cache and/or history.

  • TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    Hello there, TempestBelcher.
    It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_0
    If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.

    Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.
    Solutions?

    No, I never really found an easy solution.  I believe it is an issue with some corruption in the iTunes database on the specific device.  In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs.  A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup.  It did work, so I imagine it would probably work for my current issues with the iPhone and iPad.  But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost.  When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might.  If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
    None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it.  I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
    Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

  • I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

    I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

    Check out this thread:
    https://discussions.apple.com/thread/3677426?start=0&tstart=0

  • Trying to install iTunes on Windows 8.1.  Apple Application Support was not found.  Error 2.  Uniinstall iTunes and try again, does not work.  Is there a fix?

    Trying to install iTunes on Windows 8.1.  Apple Application Support was not found.  Error 2.  Uniinstall iTunes and try again, does not work.  Is there a fix?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for