Satellite L40 will not recognize charger

I have Toshiba Satellite L40 and my laptop will not recognize my charger unless I put pressure onto the charger head when connected to the laptop, and this doesnt always work.
I am not sure if the charger is faulty, so Ive purchased a charger from eBay, but could anything else be wrong with it?
Ive read another old post with someone who had a similar problem, somebody replied to the old post saying that it might be the charger connector on the laptop, and if so this is connected to the motherboard?
Does anybody know if this is correct, or if it's something else? Any advice would be appreciated, as I don't really want to lose the laptop.
Thanks!!

ok. To put in a easier to understand my laptop will not charge propery with my charger unless i apply pressure to the charger when it's connected to the laptop. Im applying pressure to the top of the charger where in connects to the laptop, and sometimes have to wriggle in around. I'm going to try another charger which I have purchased from ebay.
I Would like to know if it could be anything else? If the charger dock is damaged on the laptop, will i be able to change just the charger dock, or is it a bigger job.....such as the motherboard????

Similar Messages

  • Satellite L300D will not recognize USB Disc unless WLAN is disabled

    I have a venerable Satellite L300D running Vista SP2. I also have a Fujitsu 40Gb SATA disk drive from my old laptop in a USB 2.0 caddy, with dual USB plugs to draw more current.
    I can connect the USB caddy successfully to my Windows 7 laptop through a single USB plug on a USB 2.0 socket so I know it works.
    On the Satellite L300D it sets up the Generic USB disc in device manager, but does not register the 2 disk partitions as filestore in Windows Explorer. In fact when you try and expand COMPUTER in explorer it times out.
    I noticed that the WLAN (Realtek TL8187B) is on the same USB 2.0 Controller, so I disabled it. This switched off my Wireless, but immediately Windows Explorer fired into life and I could access the partitions (D: and G:) and could even run check disk (no fails) and defragment it. As soon as I ENABLE the WLAN driver the disc fails to register.
    I have updated the Realtek drivers from the Toshiba web site, but I would like a solution that allows me to use the disc AND the WLAN at the same time.
    Anyone any ideas?

    Thanks for getting back to me.
    I use both USB drives and a Toshiba external HDD and SyncToy to backup my files - both without trouble. The Toshiba HDDworks fine today - in Device Manager it is recognised as "TOSHIBA External USB 3.0 USB Device" (even though I dont have USB 3.0 ports on my laptop) and is recognised by Partition manager as disc D:. The Disc caddy is recognised as "Generic USB Disk USB Device" - but not by Partition Manager - both use the same driver and hang off the same controller. The Caddy disc works fine on my other laptop (Windows 7) and once I've disabled the WLAN.
    I had not done any specific driver downloads other than let Windows Update do its thing. It has taken me to Vista SP2 and I note that the "Standard Enhanced PCI to USB Host Controller" (above the USB Root Hub and USB Mass Storage Device in the Device Mgr hierarchy) are at File Version: 6.0.6002.18465(vistasp2_gdr.110505-037).
    Since I noticed the recognition problems and interaction with WLAN, I have done some attempted repairs (1) downloaded the latest Toshiba realtek WLAN drivers "6.1162.0610 built by : Win DDK" (realtek_wlan_20100225.zip) - but it was failing before then. (2) I have also upgraded the BIOS to version 1.80. (3) The only other change I've made is to change the driver on the PCI bus from AMD (3GIO) Filter Driver to PCI Bus on advice from another forum.
    When you say "remove the WLAN driver, reinstall the chipset driver and install the WLAN driver again" what exactly do you mean? EG in deveice manager - select WLAN - do uninstall ; what do you mean by chipset? - uninstall the Controller as well or some other device?
    RgdsColin

  • TRIED EVERYTHING!!! computer will not recognize IPOD and no charging

    Tried changing cords; tried reinstalling all software; tried to determine if conflicting software; ran ipod out of power and my computer still will not recognize when I plug it in. Backlight initially lights up but ipod does not show up in device manager, itunes does not recognize it and ipod will not charge---ipod will charge on Bose speaker platform though....ANY SUGGESTIONS??????

    If none of the above help, then it may be an issue that requires service so why not take advantage of the warranty?
    You can arrange online service here.
    Service request.
    Or if an Apple store is near you, take it there and have them check your iPod.
    You can make an appointment by using this link.
    Genius Bar Appointments.

  • Satellite P505D-S893​5 will not recognize DVD/CD Drive

    04/04/2011 My Laptop P505d-S8935 will not recognize the DVD/CD Drive.  It worked yesterday but not today.  I looked under properties and it showed not working properly....could not find driver.  Checked driver update....found driver.  Still not working.  Please advise.

    Satellite P505D-S8935 
    it showed not working properly....could not find driver.
    Please quote the message on Properties' General tab under Device status.
    -Jerry

  • My ipad will not turn on/charge, itunes will not recognize ipad, has been charging for hours power and sleep button did not work

    My ipad will not turn on/charge. has been charging for hours. Itunes will not recognize it and i have tried the power/sleep button as well. PLEASE HELP!

    Please tell me that it has NEVER been jailbroke.  If it hasn't been, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • My iphone 4s will not recognize the attempt to charge?

    My iphone 4s when I first recieved the phone it will just turn off and will not recognize the attempt to reset/restart the phone. Now the phone will not recogize the attempt to charge. I tried different cords, outlets, cord base things, and even the computer. When I plugged my phone into the computer it recognized the charge only when the phone was off. When the phone turned itself back on it no lo0nger recongnized the charge. The computer then popped up with a message that said device malfunctioned pc will not recognized device. What should I do? When I took the phone multiple times to my service provider about the previous problems they said "Oh, thats technology for ya!" Any advice?

    When I plug my phone into the computer tho it wont even reogize that it is there. If I reset my phone will I loose everything? Also which reset do I choose?
    Reset all Settings
    Erase All Content and Settings
    Reset Network Settings

  • Itunes 10.5 will not recognize iphone

    Just updated to 10.5 itunes - now it will not recognize my iphone 4.3.5.  Suggestions?

    I am having this problem, but on my Macbook Pro running OS X 10.8.2 and iTunes 10.7.  Both my iPhone 5 and my wifes iPhone 5 are not recognized in iTunes.  Both our old iPhone 4S's come up just fine.  Any other work arounds?
    I have reinstalled iTunes, restarted both phones, and Mac.  Still not recognizable.
    EDIT: 
    Just tried the other cable from my iPhone 5 box, and it works fine.  I then tried plugging the faulty cable straight into the wall, and it gets no charge.  Faulty cable.

  • My computer will not recognize my Ipod

    I am having troublr with my Ipod it will not hold a charge and my computer will not recognize it how can I fix it

    Are you using the same cable that was bundled with the iPod?
    it will not hold a charge
    How old is the iPod?  All iPod batteries will dimish overtime and lose their ability to hold a charge at full capacity?
    Does the iPod not charge when you have it connected to your PC?
    B-rock

  • TS1410 My iTunes will not recognize my iPod Nano 6th gen.   It has worked in the past and it works with my iPod 4th gen.  I've gone through the troubleshooting steps as suggested, but still -- nothing.  Now, what??

    iTunes will not recognize my Nano 6th gen. as a device.  It has been recognized  in the past and iTunes does recognize my Nano 4th gen.  The device connects to the Mac and charges allright.  All of the functions on the Nano work but want to modify my music, I'm tired of the same songs etc. 

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • My itunes will not recognize my ipod shuffle after installing Mcafee

    My itunes will not recognize my Ipod shuffle, I have tried almost everything Itunes has suggested including uninstalling and installing Itunes.  I am at a loss, the computer recognizes the ipod and assigns a drive to it.  When I click on the drive there are flies in it.  I have disabled the firewall, checked all firewall settings as suggested in previous forums.  I have tried deleting the temp files but that keeps getting hung up on a file that says it is in use.  I can stll use my ipod because it charges but I can not update songs etc.
    I contacted Mcafee but all they did was turn the firewall off (I could have done that myself).
    If there is any help I would appreciate it!
    Thanks,
    Nadine

    The first thing I did in the morning was contact McAfee they turned the firewall off it didnt work so they said it wasnt their problem.  I attempted several other things using ITunes help but none of the solutions worked.  I would say it is something in my computer but the drive shows up in my files so the computer is reading the USB port.  I tried changing the drive but that didnt help.
    I cannot find a universal "OFF switch" in McAfee But I have turned the firewall off several times after many different attempts.
    I do not find an area where I can tell Itunes where the Ipod is in Windows Explorer, that would be helpful at least it could try to locate it then. You would think this feature would be available since Itunes would like us to purchase music through them to load on our equipment.  Since my computer does not recognize my Ipod there is no need for me to purchase music.
    Do I sound frusturated - I AM But I appreciate your trying to help.

  • Reinstalled Itunes for Windows will not recognize ipod touch 3rd generation.

    Itunes for Windows and PC will not recognize my ipod touch 3rd generation.  Also it will not fully charge using a brand new apple brand power adapter and cable. I have already uninstalled all Apple software on PC and reinstalled.  I've tried every step suggested by Apple online iPod touch Troubleshooting Assistant.

    the best thing i think you could do is go to an apple store or uninstall itunes and reinstall it one more time and see what happens

  • My ipod classic turns on with apple logo then shuts off about 30 seconds later, when plugged in my windows and itunes will not recognize it.

    earlier my itunes told me that my files were corrupted and I needed to restore, so I did.  In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod on it only shows the apple logo then shuts off after 30 seconds.  If it is plugged in it will charge, but Itunes and Windows will not recognize it.  I have tried the menu + select shutoff multiple times with no change.  All it will say while it is charging is do not disconnect.

    The clicking sound is your iPod Hardisk, trying to retract and find the boot sector unsuccesfully.
    Hopefully, you can do the iPod Disk Diagnostic as in this great post by tt2., it wont fix your problem, but let you know, how dire is your Hardisk health.
    So only as a last resort, one way, to get the stuck Hardisk head free, is to bang the iPod on a rubber mouse pad, when you reset it, but do it at your own risk, some very lucky guys got it working again for the next 14 months, like myself.

  • Windows will not recognize my ipod

    My windows will not recognize my ipod. I tried running the latest Ipod Updater several times and received the following error message: Ipod requires Windows 2000(SP) or Windows XP, Please update your software and try again. I have Windows XP so I'm a bit confused to why I'm receiving that error message.
    Any suggestions would be greatly appreciated. BTW, I already tried "re-starting" my ipod and that didn't work either.

    Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem. Here are various ‘generic’ solutions that you can try in an effort to correct your problem. One should work. These are listed in simplest to more involved order (usually).
    First, make sure that the iPod is fully charged.
    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
    Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
    Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
    If your iPod shows up in Explorer under 'my computer' try changing the drive letter:
    -- Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
    -- Right-Click on the iPod and select “change drive letter”
    -- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
    -- Safely eject the iPod
    -- Reboot the PC
    If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
    Your PC may have difficulty with the USB2 protocol and the iPod. See this Article for a possible solution: iPod not Recognized Correctly
    Also try these hints (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes“Strange iPod Behavior within Windows”
    If you are getting a ‘Missing Drivers’ message, try this:
    1. Go to http://www.driverguide.com and register (free)
    2. Download ‘usbstor.sys’ & ‘usbstor.inf’ to your PC and place them in your i386 Folder
    3. Update both drivers by selecting the two files you just downloaded
    4. Reboot computer
    5. Open iTunes and then connect you iPod
    If all the above fails, you may have a Virus, Malware or SpyWare problem.
    If you do find that your Device Manager is blank, you should probably check up on this issue first: No Items Appear in the Device Manager List When You Open It

  • Windows 7 will not recognize the ipod.

    I have an ipod 4th touch 64 gig. Windows 7 will not recognize the ipod. It will make the noise of a connection and will only charge. It will not show in my computer as a hard drive. It will show in Itunes and other third party programs. I have searched the net and tried most of the advice to try and fix but will still not show as a hard drive.
    Has anyone had this problem and if so is there a fix?
    thanks

    I did read along the way about some of the ipods not being recognized as a HD. I just installed Iexplorer and looks like it will do the job. As long as I have something other than Itunes to see it as a HD. I use Syncios and Copy Trans and both work great as to transfer music. But to see the ipod as a HD iexplorer will do the Job.
    Again my ipod 4th gen will show in my computer but only the DCIM folder and a few other with pictures, no music folder or the control folder from the ipod.
    My ipad works great and another ipod the long thin ones work but not this ipod touch 4 gen 64 gig.
    Any other suggestions or help much appreciated
    thanks for the iexplorer it should help

  • My computer (windows 7) will not recognize my iPhone 4s

    My iPhone 4s has recently started acting up on my windows 7 computer. It will now not sync to iTunes nor will it even connect/charge on my computer. This was working last night. I've already removed iTunes, reinstalled it. I've made sure mobile me has been restarted. I have made sure only one computer is authorized to use this iPhone. The USB WILL NOT RECOGNIZE error message comes up every single time i plug the iPhone in. I've run scans on all my usb ports and they are all functioning properly.
    What am i missing here?

    That a look at this link, http://support.apple.com/kb/TS1538

Maybe you are looking for

  • Is there any way to get the height/width of an image before importing it in the indesign document.

    Hi All, I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document. I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg). I have obtained the IDFile for this im

  • Printing to HP PSC1300 Series shared by Windows XP

    I have configured my macbook to print to a HP 1300 PSC printer on a Windows network. I have downloaded all the drivers and they appear in my printer list - and I have configered to print to the printer (a HP PSC 1355) on the network. When I print my

  • HOW TO DUAL BOOT W540 with windows 8.1 / 7

    I got my W540 recently with windows 8.1 pro on it. but as all engineers worst nightmare windows 8 has hard time with engineering softwares (for my case TIA Portal for  PLC programming software which only support windows 7). so i need to have a window

  • Getting phone out of iTunes recovery mode loop

    A while back I dropped my iPhone 4 in the bath, everything worked fine apart from the home button which didn't work at all and when my phone was completely flat and I put it on charge it would tell me to connect to iTunes, I used to solve this my unp

  • Powershell to get instance name

    Hi, Not sure whether this is the forum to ask.I have a list of servers names and i need to get the instance names in below format. SERVERNAME\INSTANCE1 The o/p of the script actually shows Servername,MSSQL$Instance name..Anyway to tweak this to SERVE