Satellite L455D-S5976 - blue screen after BIOS update

fan wasnt operating properly causing overheat so updated bios,
see here
[http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67086&tstart=0]
and now i am blue screening (it flashes extremely quickly) just as the windows xp screen on booting appears. keeps doing over and over, please help.
*edit,*
incidentally as the bios started updating the fan immediately picked up speed. strange.
Message was edited by: toshibauser_2

So you are not able to access BIOS???
Press F2 immediately (press it many times in the row) after notebook has been power on
But if you are not able to access the BIOS, I assume that there is a serious problem with BIOS/hardware possibly something went wrong during the updatebut usually this should not happen and its sounds strange
However, I think in such case just an ASP technician would help you.

Similar Messages

Blue screen after bios update

Processor: i5-4570
Mainboard: Msi H87M-G43
Graphics Card: GIGABYTE Radeon R9 280X Overclock Edition
Memory: Kingston 8gb(2x4gb) 1600MHZ
Display: Dell S2340L
Storage: WD Blue 1TB
Casing: Corsair Carbide Air 540
PSU: Superflower Golden Green 600w
OS: Window 7 Home Premium OEM 64bit
Bios version: 1.0
I didnt set anything. I just click the update button for the verison 1.4 from live update 5. After the bios finish updating the system auto reboot then the blue screen appear.
I still can go in the bios.
The blue screen appear means the update has damaged my motherboard?

try a CMOS clear with power cord removed >>Clear CMOS Guide<<
once you have reset the CMOS make sure the boot order and drive modes are correct and retry for a boot!
<<<Do not use MSI Live Update to do BIOS flashes as it has a awful reputation for bricking BIOS chips>>>
if doing the CMOS clear doesn't get you back up and running then you may need to attempt a manual update using either M-Flash or by >>Use the MSI HQ Forum USB flasher<< and make a bootable USB stick with the BIOS files on it!

Satellite L450 (PSLY0E) - black screen after BIOS update

It seems like I have "bricked" my laptop during a bios utdate gone bad...black screen, as suspected :o /
The laptop is a Toshiba satellite L450 (PSLY0E)
The new bios image is named "bwaa150a.rom"
Anyone knows if it is possible to recover the bios from flashdrive or floppy, using some sort of recovery toolfrom inside the bios chip? ...or something?
Anyone knows who is the manifacturer of this bios?
If I have to rename the bios image during a recovery, what shoult it be named?

Well, I've just brought my bios back to life... :)))
I used the "wincrisis" available from wincrisis.1.0.0.4
Basically I followed the instructions in the download above to create a recovery usb-flash.
Then downloaded the correct bios, renamed the "rom-file" to "BIOS.WPH", and copied it to the usb-flash.
Then I disconnected both the battery and the power connection cable on the bricked laptop.
While pushing down the "F-key" on the keyboard, I reconnected the power cable and powered on with the power button, holding down the "F-key" *all the way till the laptop powered down by itself* after 2-3 minuets.
Then, powered up the laptop normally...voil, running normally, with the newest bios... :)))

Satellite A200-1fj - black screen after BIOS update

hello guys ,
i was planing to update my bios to this version
http://support.toshiba-tro.de/tools/eula/calleula.asp?ID=63108
and my pc got little froze and lag then i close the program that flashing my bios and restart my lap then screen black ..... i search and found this thread talk about BIOS recovery and it seemed not workin for me ( i use my 8 Gigabyte flash memory ) and just i do Fn+B when i press power button to do boot and then the power led become orange ....... and nothing happen ....
anybody plz provide me the right bios file for this model and give me a clear instruction to flash my bios with my flash memory (8 GB)
w8 ur replay guys , thx
+Message was edited: link removed - 3rd party forums not allowed+

>and i mean clear cmos in doing a short in something near to ram or change jumber ... like Desktop clear cmos
This is not possible for notebook boards
>lol , i send it to a specialist one .... tell me my current BIOS ChIP got damage by flashing it and interrupted flashing procedure ...... is that true???
Could be possible that the ROM module is damaged but in most cases the usage of BIOS crisis disk could solve this issue and as far as I know the Toshiba authorized service provider would be able to do that.

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Satellite L650-1KR PSK1JE - dead after BIOS update

As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
Of course my warranty is already over... :-(
Please help!
Thank you in advance...
lichtimc

Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

Satellite A660 - USB boot problems after BIOS update

Hello,
I own a Toshiba Satellite A660 and recently have update the BIOS to the latest version (1.80). Since then the notebook will freeze on the boot screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
It works without the flash memory connected and also if I connect it after I enter the boot menu or the BIOS setup. I can even boot from it like this.
As far as I am concerned this is a serious regression. Is there any way I can downgrade the BIOS version, or any other way to fix this issue ? I rely heavily on external USB drives.
Regards,
Claudiu.

I too am having problems with my A660 since upgrading to 1.80 bios - the HDD/SD utility, the pc health monitor and half the other toshiba utilities no longer work because they can't recognize the bios and actually tell me this... I get an error message telling me ''can't get bios type''...
On top of this I get the boot problem as well - I have to unplug half of my USB devices to get the laptop to boot properly...
And now - one month into owning my new A660 - after a hard drive failure, a problem with the Broadcom internal wireless adaptor I now have the internal TV tuner no longer working and have no idea how to fix it...
My gut feeling is that the sooner I can downgrade to the original factory bios the BETTER - and wait for another bios update to come along that is not faulty/buggy...
HOPE someone can help me with this...
John.

T60: Abort with Blue Screen (After Lenova Update)-- 79ETE0WW (2.20)

All
I need Urgent help. I run Lenova updates and it downloaded BIOS update 2.2 79ETE0WW. Plus other Driver Updates. After that I started gettin BLUE Screen Errors.
I have updated ATI Driver also.
STOP 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000)
Any Hint how should start solving this.
I have XP SP 2
PG
Message Edited by i080927 on 02-15-2008 07:22 AM

007India,
You are wise to do research in advance of any major purchase.   Regardless of manufacturer , be it Lenovo, Acer, Dell, or HP, people tend to post their problems to the internet rather than their successes. How many people take time to post everyday saying "everything is going great!" ?
Yes, there has been a lot of discussion about blue screen issues. Some caused by turbo memory drivers, and if you check the forum there are updates and fixes for that. Some could be OS related, and some may relate to specific drivers.
Some of your broad assertions, like being forced to use only a single Dimm, are perhaps a bit over generalized. The issue you are referencing is related only to the T61P model, and there is no limitation to only using one memory module. Some customers have discussed lockups while gaming in 3D games with dual dimms, but service has been able to resolve these when noted. We are finalizing our investigation on this issue and resulting resolution. There are no similar issues with rest of the T series, or any X or R series systems.
The choice of whether to apply updates is certainly up to the individual.
Yes, there are stories posted about customer service, but I would suggest that you count them, and consider them against the hundreds of thousands of customers WW.   Again, people tend to post about the exceptions or the problems rather than saying everything is just fine. We do work to resolve issues when they arise.
Once again, I think you are wise to thoroughly evaluate products you are interested in, and the companies that produce them ahead of making your purchase.   I hope you are pleased with whichever system you purchase.
Best regards
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Flashes from apple screen to blue screen after latest update.

After I updated last night my phone would never reboot. Goes from screen with apple on it for several minutes then flashes to a blue screen for a second then back to apple screen. I tried hooking up to computer but its like nothing is hooked up. Help!

Hi marston44,
It sounds as if you have experienced an issue with updating the operating system on your iPhone. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
If you can't update or restore your iPhone, iPad, or iPod touch
Thanks for using Apple Support Communities.
Best,
Brett L

Getting Blue Screen after OS Update.

Dear All...
Iam Having 10.5.1 MAc X. I started a OS update to 10.5.8 and it provided me as a file. I started installing the File. After installing the File, it prompted me to make a restart. On restart, iam getting a Blue screen and the process is running... and no login screen is appearing..
Not sure is that installing in the background or any other problem.
Please assist.

http://discussions.apple.com/ann.jspa?annID=495

Black screen after BIOS update on K9N Neo V2, help pls?

Hi guys!
I have K9N Neo V2 motherboard and Athlon X2 5400, I've decided to upgrade and bought Phenom x4 9750.
So I've updated the bios to 3.0O from https://forum-en.msi.com/index.php?topic=124305.0 using the instruction, it went fine, I've been using it for a week but found out some bugs (windows blue screen and applications and OS hangups), then I got to restore OS from acronis true image - failed. And then I decided to check if the new bios supports my old athlon or not, I've changed the CPU and started - failed, dark screen no bios, I plugged back Phenom and now it also is not working :((. Have no idea why and what to do now..
Would really appreciate any suggestions and help.
Thank you in advance

Quote from: Svet on 19-August-13, 22:20:56
you can do >>Clear CMOS Guide<< with power cord removed and try to boot with 1 memory stick only in 1st DIMM near to CPU slot
Thank you, I'll give a try and post the results, thanks!

MBP flashing blue screen after software updates

This morning, my 2011 MBP 17" 2.2GHz i7 (running 10.6.8 with all updates) suddenly started flashing between whatever I was doing, and a light blue screen every few seconds. (The same light blue screen that you get briefly when switching users and starting up). If I restarted, after a random period of a few minutes, the problem would return.
Things kept going during the blue periods (ie keystrokes worked, downloads continued etc)
I tried repairing the disc and permissions. I kept getting certain incorrect permissions coming up, which were related to coreimage IIRC. They were reported as being fixed, but as soon as I ran it again, the same errors came up.
Tried numerous restarts and repairs to no avail. Zapped the PRAM. Ended up reinstalling OSX from the original install discs (10.6.6), and the problem went away. I then did the first software update that came up, which was the 10.6.8 combo and a few other bits and pieces. Used the machine for a few hours with no problems.
I then ran software update again, which was:
Thunderbolt update 1.0;
Safari update 5.1.2;
Security Update 2011-006;
Java 10.6 update 6
The problem reappeared almost immediately, so I'm putting it down to one of those four updates. I'm leaning towards Safari, because on each occasion I got the blinking blue screen, safari was open (although in the background at least once). I'm also pretty sure that I updated Safari (alone) the night before the problems started.
Anyone else having this issue?
EDIT: I should add that my MacPro isn't having this issue, and it has all the same updates installed except for Safari (still running 5.1.1).

I turned graphic card switching back on and ran the latest Safari off and on using youtube etc. with no problems. It used the HD 3000 card all the time for me. I have all the latest updates for 10.6.8 installed on my Early 2011 15" Macbook Pro. I've updated all my applications to eliminate the need for Rosetta. If the problem returns, do a safe mode startup (shift key and power key) and then a re-start to re-built your startup cache. You may have a startup item that's giving you a problem or one of your applications may be running in the back ground even after you quit it. Also, the permission errors never seem to go away no matter how often you run the repair permissions. This doesn't seem to mean anything. These "blue screen" problems probably have to do with with the Apple updates required to transition to Lion. Lion doesn't use Rosetta and you can't run power PC apllications. We had something that worked and Apple screwed it up.

Black screen after BIOS update

Hi there,
After updating BIOS with regular HP software (i forgot the name now), the computer shut down and from that moment when i turn it on the screen stays black (with computer apparently running). I read so many posts with similar problems and i tried few things but without success. I know that i am very close to solve the problem but from all the suggestions i am now simply confused. I would like to ask, if someone can guide me through step-by-step procedure, i figured out that i need to install a BIOS version on USB-stick, but exact details i am obviously missing.
I have HP Pavilion dv 6700 Entertainment PC and new HDD inside without HP_TOOLS on it.
Thank you veeeeeryyyy much!

Hello @milence,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your computer is experiencing a black screen after updating the BIOS, and I would be happy to assist you in this matter!
To return the BIOS back to factory default settings, I recommend following the steps in this document on Restoring the BIOS. If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HP elitebook black screen after bios update

I recently bought a great condition HP elitebook 8440p. I installed a new hard drive 1TB hybrid hard drive ssd+HDD. I managed to get the computer working and everything was fine untill I decided to update bios. I searched up drivers and the first thing came up was bios update so I said to myself why not. After the program shut down my computer, I immediately noticed abnormal fan speed. There was no picture, and the panel lights were on and two lights (Cap lock and numlock) were blinking 3 times for 5 sets so (blink blink blink (Pause) blink blink blink (pause) blink blink blink (pause) blink blink blink (pause) blink blink blink. After that nothing else happenes. The other panel lights stay on and the fan continues to spin until i turn it off.
Things i have tried.
1. Installing update bios to 16gb flash drive, making it bootable and then sticking it into the USB port. Holding down Win+B. Also tried to hold down FN+insert , (Up+ down+ Left+ right), f10
2. Several hard resets (Holding down power button for 30 seconds, 1 min to 30 mins.
3. Reseating ram. Ram is 100% functional. Stuck it into an Asus G75VW and showed I had 10 GB rather than having 8 .
There are no instructions on how to fix this problem on the 8440p and I see people asking for answers. I am really fustrated and spend several hours trying to figure this problem out on Youtube, HP forums etc. Thanks

I have same issue with my HP EliteBook 8440p.
I updated my bios throuh HP SoftPaq Download Manager and aftrer the reset the computer won't boot, I get a black screen and it lights up and fan is working.
Since my warranty expired and this is official HP software I am wondering who will cover the costs of the repair?
The laptop is currently in offical HP service for two weeks now and they are waitnig for a reply from HP central for a possible solution for the issue.
From what I read on HP support forums there is no fix and HP isn't in a hurry to answer on anyones questions about that which is very sad for a company I thought was professional... also, the surprising thing is that this is not a cheap laptop for the masses but a laptop which is built to last for professional users
The question remains, is there a fix for this issue and if not who is going to cover the cost of repair/replacement of the components/laptop?
Best regards,
Cole

Satellite L455D-S5976 - blue screen after BIOS update

Similar Messages

Maybe you are looking for