Satellite L50-B-1P1 - external display is not working

I have just bought a satellite L50-B-1P1. When I tried to connect the RGB (VGA) port to a TV ( as a external monitor), the display screen of the laptop became smaller and the right part of the whole picture was missing, even when the external monitor was not switched on.
The laptop screen has left and right display a black background. The picture is located in the middle. Is this supposed to be normal or something is wrong with this laptop?
All answers are welcomed

As I understood the message, you have enabled the external display output and could see the picture on the TV.
The question is; what resolution the TV supported and what external output option did you choose?
The point is that you can switch to the external display choosing the option; extended desktop, clone display or you can switch off the internal display and show the picture only on external monitor TV.
In case you have cloned the display, both displays (internal + external) has to use the same resolution! In case the TV would support lower resolution, the internal notebook screen would lower the resolution too!
I would recommend you to read the user manual it provides some basic notebook knowledge

Similar Messages

Connection to external display does not work under windows bootcamp, with a thunderbolt to vga adapter.

Hello guys, after searching a lot in the forum for an answer to this, I could not find a solution so this is the reason for this post.
I have a Macbook Pro (early 2011 I think) running MacOSX Lion and I have installed Windows 7 64-bit through bootcamp (version 4.0).
Everything works fine except that I cannot connect my external display through my thunderbolt-vga adapter.
The external monitor shows only the boot screen of windows (the one with the windows logo) and then, when I get into the login page it goes blank.
After reading the forum, I have done several things in order to fix this problem such as:
Restarting the macbook with the thunderbolt device connected to it.
Updated to the latest ATI drivers through bootcamp.
Removed the graphics driver and re-install it again.
I have tried to identify the external monitor through windows 'screen resolution' tool (attached photo).
but still no luck.
Does anyone have any idea on what else I could do in order to fix this? By the way, I find it very frustrating that Apple does not have a stable solution to the problem with devices that are connected to the thunderbolt port.
Thank you in advance

and here is the attached screenshot

External Display wil not work when I close my MacBook Pro

Help! I'm using a Vizio LCD with Bluetooth Keyboard and Mouse and I'm trying to use just the display with the MacBook Closed and Powered, but as soon as I do that the Screen on the VIzio dies. I worked for a while but now it won't work anymore. I can here the mouse and keyboard working but the screen on the Vizio will not display anything. bought a the only thing that I'm thinking is that i bought a cheap HDMI to DVI cable at Walmart..could that be the problem? Any feed back would be welcome. Thanks

6 With the computer turned on and your wireless keyboard or mouse paired, connect the other end of the adapter to the video output port on your MacBook Pro.
7 Once your computer's Desktop appears on the external display, close the MacBook Pro lid.
8 Once it's closed, wake the computer up by either clicking your Bluetooth mouse button or by pressing a key on your Bluetooth keyboard.
You mean it never wakes the external monitor at this point?
http://docs.info.apple.com/article.html?artnum=300562

My external display does not work

i've got a macbook pro and a Medion extra display.
i bought a adapter and all, It worked. but now after I unplugged it for teh 5th time or so, the mac stopped reacting on the display and conversely.
can somebody help? thanks

Hello Kaloka Kaloka,
Thanks for using Apple Support Communities.
From what I understand you're unable to connect to a specific external display, but your TV does function as an external display. Please follow the relevant instructions in the following article to troubleshoot this issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Take care,
Alex H.

Late 2010 MacBook Pro 15", upgraded to Lion on Sat 23rd no external display does not work

Hi all,
Wanted to ask this question here see if anyone might have a solution to my problem. I have a Late 2010 Macbook Pro 15" which I upgraded to Lion yesteray. Ever since that upgrade when I try to connect to my TV to watch a video no joy the image looks like the colours are out.
I have tried it on different resolutions and always the same. Then for some reason the MacBook Pro split the screen in two. So now I see the right of the screen on the left of the TV and the left on the righ with a big black line done the middle.
Priror to the Lion upgrade everything was fine. Only since Lion has this been a problem.
I am using a Minidisply to HDMI cable to go direct into my Phillips 42" Plasma, and I have not got a clue why this is doing this. The strange thing is it works ok on my Samsung BX2450 down the same cable no problems at all just the TV that has issues.
Any suggestions?
Cheers
ZeroG

Hi Cyberviper42,
I understand that you are seeing some issues with your connection to the internet on your computer. I have an article for you that will help you troubleshoot this issue:
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
https://support.apple.com/en-us/HT202222
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Satellite L50-B-2C8 - new SSD is not recognized in BIOS settings

Hello,
I just bought a new notebook Toshiba Satellite L50-B-2C8 and I also bought Samsung SSD 850 evo 250GB.
When I try to install the SSD drive instead my HDD the BIOS show "none" in Category SSD/HDD (BIOS not recognize the SSD).
Please help me.
My bios version is : 2.00v
*** someone told me that I need to downgrade my BIOS version to 1.2v, and then the BIOS recognize the SSD drive, so maybe someone here can send me a download link to the 1.2 version of my model L50-B-2C8 .
Thanks

Originally Posted by Eldorado
And who? I mean are you sure that this person was right?
From my point of few there is no reason why early BIOS version should recognize the SSD drive and the newest BIOS version doesnt
But BIOS v1.2 for Satellite L50-B-2C8 PSKTQE series does not exists the v2.0 (at this time) is the latest version and older BIOS versions are not available for this series.
Furthermore I guess you will need slimply check different SSD drive it could be possible that other SSD drive would be recongized properly.
By the way: Im owner of Evo 850 SSD drive and as far as I can remember I had to update the SSD drive firmware to use it properly in connection with my other notebook (not Toshiba unit)
problem solved tnx

External Display will not turn back on after sleep

Just bought a new MBP last week and gave my wife the MB. I typically attach to an external 24" display and run in closed clamshell mode. I have been doing it for quite some time with no issues. Now with the new MBP if the energy saver kicks in and turns off the display, and/or the energy saver puts the computer to sleep when I attempt to wake it up the display flashes then goes blank. There is no way to turn it back on. When I open the clamshell the internal display will only show some random pixels and a white line at the top of the screen. There is no way to correct it unless I shut down the machine.
I am running with the Nvidia card, not the internal Nvidia. If I manually put the computer to sleep it will wake normally with no screen issues. It will also not act up if the external display is not connected.
Any help or suggestions of a setting I might have wrong that would cause this?

It is a Gateway FHD2400. Connected from mini display to HDMI. My previous MB was connected to the same monitor for the last year with 0 issues. It was connected mini dvi to VGA.
The issue is strange because it only happens when the computer turns off the screen or sleep. When I put it in sleep it doesn't happen.

Upgraded to Yosemite and now external display is not detected

I just upgraded to Yosemite on my 2009 MacBook Pro and now it won't detect the external display. It worked perfectly before the upgrade. I have the display connected by USB. Is there anything that can be done about this? I really need that external display for work and am really regretting downloading Yosemite.

Exactly the same issue. My Eizo Coloredge was working fine after installation until (just now) I dared to do a restart...
I have tried various different displays and connections over the past 20 minutes and have restarted my mac (late 2013 MBP 15' Retina) and connected / disconnected multiple times. Neither my Coloredge via Thunderbolt or HDMI (no signal detected) is recognised, nor a Samsung LCD via HDMI.
SO frustrating that something this basic should now be 'broken' when it was fine under Mavericks (and earlier OS). Come on Apple, let's get a fix. Plenty of people rely on external monitors.
Sigh.

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Mac Mini + A1038 Cinema Display does not work

Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?

Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this. I am running windows 8 on parallels.

Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

It was working untill i did the update

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

External mouse scrolling not working

The scrolling function of my external mouse does not work when the MacBook Pro is not plugged in with its powercord. The mouse buttons seem to be functioning. So does as an external keyboard. My wife has the same problem (using 10.6.2 OS). There are no options in the System Preferences that deal with this. Is this just an oversight by Apple? This basically makes using an external keyboard and mouse a nonviable option for a laptop unless you are near an electric outlet. If you know of a workaround I would appreciate the information. If not, it is something Apple will have to correct as it a pretty obvious oversight.
Thanks in advance for any advice.
Tony

Check your settings when it is unplugged to make sure they are still properly configured. You might even want to try and disable the trackpad when a mouse is being used. I would also check out USB Overdrive (Shareware).

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

Satellite L50-B-1P1 - external display is not working

Similar Messages

Maybe you are looking for