Satellite L50-B-281 - WiFi Driver won't work

Hi everybody,
I have a problem I just can't find a solution to
I've bought a L50-B-81 without OS, because I have a free W7 licence.
I used the Driver Download at Toshiba to look for the Drivers.
For my model (PSKTCE) I was presented two Drivers one for Broadcom and one for Aatheros.
The Broadcom installer did not do anything so I presume, I don't have Broadcom Hardware.
The Atheros driver installed only Bluetooth.
Is there an easy way to determine what the Hardware inside is?
The device Manager, where the not working devices are marked with this triangle warning sign, tells me it does not know the manufacturer.
Thanks a lot
haegarhorrib

Originally Posted by Jeffrey
The Satellite L50-B-81 isn’t known to me… I assume you mistyped the model number… Could you double check your model number and share the right name with us?
Thanks for the hint .
What I wanted to Type was
L50-B-281.
THX
haegarhorrib

Similar Messages

PB 1400 CD & Floppy Drive won't work

We gave our granddaughter my wife's Powerbook 1400CS which she used for about 6 months. She brought it back because the CD and floppy drives will no longer work. Even if I open the drive with a paperclip and insert a CD it will not be recognized – same for a floppy. I got a serial cable and in target mode did a clean install of 8.6 but still the drives won't work. Does anyone know why?

Larry
The HDD in the PB 1400 is ATA Bus 0, and the CD-ROM is ATA Bus 4. (See ASP/Devices.) The FDD is well, the floppy drive. It is at least worth while for you to check that it is not drive faults that you are dealing with, but some other, since mass but selective failure of the buses seems unlikely.
If the PB's AC adapter is functional, it may still happen that the 'backup' battery (or batteries if it is an 'extended' 1400) has not recovered from depletion at some recent time. PRAM and Power Manager may be feeling poorly enough not to remember what they should and what is where. If you boot the PB, and then remove first the AC adapter and then the main battery, you should get up to 2min of remaining life from a good backup battery. If you get instant shutdown, you can fairly guess that the backup didn't. The backup(s) begin to charge only when the main is fully charged. What is the state of charge of the main in the Control Strip? If it shows full, leave the PB on the adapter for 24-48hr to make sure of the charge on the backup. Otherwise, set the main to charge (with the PB off), and add 24-48hr more after the main shows full charge.
Then start up with a traditional PRAM-zap. The PB will shut down in response, and can be restarted with the reset switch between the serial and ADB ports. Then you can validly sleep-swap the CD-ROM and FDD to check their function. Is it possible that they have been swapped while the PB was not off or asleep?
System installation in target disk mode via the HDI-30 port does not work because PB-specific software does not get installed. It is conceivable that a serial port installation will also not work, again because the PB is not identified to the host machine as a PB.

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

My wifi driver is not working with windows 8.1 in my MBA2013?

My wifi driver is not working with windows 8.1 in my MBA2013?
i installed windows 8.1 with bootcamp, everythigs seems to be working fine except the wifi,
please help me to solve this problem,,
thanks

neokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

External dvd drive won't work on USB macBook air

External dvd drive won't work on my macBook air usb port. It works on older versions of air and iMac.
Any ideas. Tried the left shift, control, option and power button sumultaniously, but did not work.

I know that no one has replied yet, but figured out the issue. I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store. They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive. When I got home, I thought I would try one more thing. I hooked it up to a powered hub and it works perfectly. I'm not sure why no one else thought of it, but glad that I did.

I have a G5 with Tiger to sell and want to erase all my data from it, but the cd drive won't work so I can't use the OS10 start up disk. Answers?

I have a G5 to sell and want to erase all my data from it, but the cd drive won't work so I can't use the OS10 start up disk. Any way to do it?

Do you have another Mac? If so, you can startup this one in "Target Disk Mode" (instructions here) and connect it to another Mac to delete the home folders (or the entire drive, if that's what you want).
One piece of advise, though: after deleting the data, and of course emptying the Trash, it wouldn't hurt to also securely erase the "free space" of the drive (instructions here) before disconnecting the old Mac from the new one. This can be helpful, since "deleted" data is often retrievable with ease unles it's written over after the deletion.

So, now my CD/DVD drive won't work

I made the BIG mistake of upgrading to LION last week.   Up until that moment, EVERYTHING was working fine on my MAC.   I downloaded the software just fine but when I went to install it I received a message saying my hard drive was full.   I'm sure that I had plenty of room left and would have thought that if it was full I would have received that message PRIOR to the download.   Nevertheless, I tried it again. This time I received a message saying that there was something wrong with my hard drive and it needed repairing.   I did the verification and tried to do the repair but it wouldn't work.
Made an appointment with the Apple Store, (at least I live near a store), and they went through all the diagnostics and said, "There is nothing wrong with your hard drive yet we are unable to install the upgrade ... meaning that my computer will not function. I had to buy a new hard drive and have them install LION on it.   Before I left the store I told the tech guy that I'd like to turn it on to make sure it would work ... guess what ... it wouldn't.   "I can't understand it", he said, "It was working just fine a few minutes ago."   I had him try it a few more times and then he advised me that they'd have to do it again and for me to come back (again).
So, now I have a new hard drive and a new operating system ... but I had to pay for it in cash, frustration, time, and lost data (my email archive mostly) ... BUT ... now my CD/DVD drive won't work.   I've had to reload software with an external drive.
What the **** ????
Anyone with some thoughts on this?
(Plus I've had to create a new MAC ID?   Why won't it accept my old account ID?)

Thank you again ... I wasn't aware of that bit of information.
I've never used Toast before but have heard of it. I just went to their website and watched a quick video. I'm a tad confused though ... is Toast able to rip movie DVD's before burning a copy?   I used to have some software that could do this but, of course, it's now gone with my new hard drive.

I updated to maverick and now my toshiba hard drive won't work

i updated to maverick and now my toshiba hard drive won't work

shakejke wrote:
i updated to maverick and now my toshiba hard drive won't work
whats the format on the external HD?
verify same on another Mac, its likely a dead SATA card inside the external enclosure.
One assumes you arent referring to a 2012 Air with a Toshiba SSD, since the Air contains no hard drives, only a SSD.
2013 Air use Sandisk or Samsung SSD.

Satellite L50-B-1P1 - external display is not working

I have just bought a satellite L50-B-1P1. When I tried to connect the RGB (VGA) port to a TV ( as a external monitor), the display screen of the laptop became smaller and the right part of the whole picture was missing, even when the external monitor was not switched on.
The laptop screen has left and right display a black background. The picture is located in the middle. Is this supposed to be normal or something is wrong with this laptop?
All answers are welcomed

As I understood the message, you have enabled the external display output and could see the picture on the TV.
The question is; what resolution the TV supported and what external output option did you choose?
The point is that you can switch to the external display choosing the option; extended desktop, clone display or you can switch off the internal display and show the picture only on external monitor TV.
In case you have cloned the display, both displays (internal + external) has to use the same resolution! In case the TV would support lower resolution, the internal notebook screen would lower the resolution too!
I would recommend you to read the user manual it provides some basic notebook knowledge

External optical drive won't work on macbook pro retina.

I have a macbook pro retina which doesn's have an optical drive. I have bought an optical drive. When I plug it in and put a disk in I can hear the disk spinning and the light comes on but nothing happens on my mac. It doesn't seem to recognise it. Any suggestions?

Anniefb1 wrote:
I have a macbook pro retina which doesn's have an optical drive. I have bought an optical drive. When I plug it in and put a disk in I can hear the disk spinning and the light comes on but nothing happens on my mac. It doesn't seem to recognise it. Any suggestions?
Just had that happen to me.
First, run Disk Utility and see if the SuperDrive (it is an Apple SuperDrive isn't it?) is listed. Is the disk you inserted shown? If not, hold down the option key and click the Apple menu - choose System Information and when that shows up, choose USB. See if it's listed there. If it is but neither the drive nor the disk you inserted appears on the Desktop, the side bar of the Finder window, or Disk Utility, return it for a refund (if it's within 14 days of purchase) or a replacement. That's what I had to do a few hours ago and the replacement works as it should.
BTW, if you want the disk you inserted back, and pressing the trackpad as you reboot doesn't eject the disk, as a last resort run Terminal and enter (copy and paste the following)
/usr/bin/drutil eject
to try to force the disk to eject. It probably won't work (it didn't for me) but if it does, at least you get that disk back.

Satellite A500 and Win8 - DVD drive is not working

I have upgraded my Satellite A500-17X to Windows 8,but now my DVD Drive will not work.
Anyone know how I can get it working again.
Thank You.
Cumbrian

Solution here:
http://www.csd.toshiba.com/cgi-bin/t...e&soid=3516888
*Uninstall the Toshiba programs:*
• TOSHIBA Recovery Media Creator
• TOSHIBA Disc Creator
Then restart your PC using the Power-->Restart option in Windows 8.
Your CD/DVD should be accessible now.
For help with uninstalling these programs follow the instructions below
*To Uninstall a program or application:*
1. At the START screen type Control Panel
2. Select Programs --> Uninstall a program
3. Find the two programs listed above and uninstall these applications
4. After the application programs are uninstalled restart your computer using the Power-->Restart option in Windows 8
5. When the computer power back on the CD/DVD drive should be available
If the CD/DVD drive still does not appear follow the instructions below to uninstall a device driver
*To uninstall a device driver:*
1. At the START screen type Device Manager
2. Select Device Manager > DVD/CD-ROM drives > right click on the device displayed > select Uninstall.
3. After the driver uninstalls, power down you computer using the restart method. The driver will install automatically when the computer restarts.
4. The CD/DVD drive should now be shown.

Brtand New Mac Pro Internal Optical Drive Won't Work

Actually, this is a two parter. My new Mac Pro internal optical drive rejects every disk I insert. It won't read anything. Should I get it replaced? Part two: I have an external Sony optical drive which was working up until yesterday. Today, I was going to go through some disks and now THAT drive is rejecting everything. I had it connected via USB and changed it to a 400 to 800 firewire. I tried to read some disks again and still they get rejected. What can I do to correct these problems?

I am having the exact same problem with my mac pro since upgrading to 10.5.7 neither of my drives will read CD or DVD and it states that no burning software was found in the system profiler

Cube 450 optical drive won't work!

Hello fellow Power Mac G4 users!
In both of my Power Mac G4 450 and 500 Cubes, the DVD drives stopped working! The DVD Player app says "There was an initialization error. A valid DVD drive could not be found. {-70012}"
CD's don't work either and never appear on the desktop! Before I replace the drives, why do Cube drives fail while the same drives in my iMac G3's work perfect always? Is it because the Cube forces the drive to sit vertically? I downloaded VLC Player, but that won't work either.
I use this trick to get the discs out...
http://www.cubeowner.com/forums/index.php?showtopic=13848
Also, I pulled my 450 apart and made sure the optical drive connector was seat properly.
Thank you in advance!

If you are the DYS kind of guy you can buy a replacement and change it yourself. While you are at it you can clean the coffee remaining inside your MBP.
Once the broken optical is out you can wash it with fresh water to get the sugar out and let it dry in the oven at very low temp (it's dead anyway) . You have a slight chance to get it working again. It worked with a cell phone for me...
And the classic answer is: Call Apple.
After I dropped a soup over one of my PB's I learned the lesson...

DVD drive won't work after Mavericks upgrade

I upgraded to Mavericks from Snow Leopard, and ever since, my CD/DVD drive will not work. Discs spin, but then they are ejected. Doesn't matter what type of disc I put in.
The drive was working fine before I upgraded. I have reset the SMC and the NVRAM/PRAM, but the drive still isn't working.
Any suggestions for what else I can try?

Others here wouldnt recommend it, but on a new OS install, since I have a giant pile of HD, ...i just grab another HD and create a new fresh Time Machine backup
after its complete, I take the original HD with the OLD backup and format/erase it.
Im a tad too lazy to wait, as you yourself mentioned, 1 hour for TM just to PREPARE to backup. Nope, no,...not gonna do it.
I updated 4 Macs to Mavericks and id rather make a wholly NEW Time Machine backup on another HD and erase the original.
Since I keep about 12+ redundant archives of my important data, I have no worry on earth of ever losing data.
Time machine is a backup, NOT an archive for vital data.
Methodology to protect your data. Backups vs. Archives. Long-term data protection

WD External Drive Won't work with Time Machine or anything else

I am really hoping someone can help me. I have been using Time Machine to backup my hard drive on my Macbook and using a WD drive. Everything worked until right before Christmas. Something happened and I don't know what and I am not sure the last backup worked. I can no longer see the external drive in the finder, but I can see it in Disk Utility and it shows up in About this Mac. When I've had the drive connected today, the disk is turning and the status light is flashing. I can see data being written in the activity monitor which makes me think something is happening with the drive. In Disk Utility, I can eject the drive, but can't select it to do any first aid or other activities. Anyone have any suggestions?

You might want to try resetting your MacBook's FireWire Bus to see if that cures the issue: http://tinyurl.com/7p6jfx.

Satellite L50-B-281 - WiFi Driver won't work

Similar Messages

Maybe you are looking for